BLADE Magazine

Tips for Making Knives: Forging During the Summer

Knifemaking Tips

Mike Key of Key Custom Knives gives the author a break during forging. Such breaks are key to reducing each forger’s time near the hot forge.

  1. Hydrate
  2. Limit Heat Exposure
  3. Dress Appropriately
  4. Sweat the Load
  5. Divide the Labor

Like most forgers, I try to build a stockpile of damascus and different sized blades in the winter months when the temperature is below 50 degrees F. Sometimes, because of where you live, it might not drop below 70 degrees F. Hot is hot no matter where you forge, and there will be a time when you have to forge no matter how high the temperature is.

Here are some helpful hints to get you through the hot times.


Keep a squirt bottle nearby for a cooling spritz when you need it.

“Pre-hydrate” the day before you are going to forge. Also, drink plenty of water during forging and afterward. I use a squirt bottle to spray myself during forging to add extra cooling. Staying hydrated should keep those nasty headaches away.

Limit Heat Exposure

Take frequent water breaks while sitting in a cool breeze if at all possible.

If you are lucky enough to have a second person that knows how to forge helping you, take turns doing the work. This limits the amount of time one person has to stand by the hot forge. After your turn, get away from the heat and drink fluids.

Usually I’ll pull a chair close to the door to catch any breeze that might be blowing. I place a fan to blow across the cooling chair if the temperature’s above 90 degrees F. Some have a gas forge that can be moved outside, which is better for the radiating heat, though a strong wind can mess with the fire.

The main point here is to limit the time you are exposed to the forge heat.

Dress Appropriately

The author eschews long sleeves while hammering a hot billet.

I do away with such coverings as aprons, arm covers and/or long sleeves. I haven’t gone to shorts because there would be a piece of hot something rolling down my leg and into my work boots. No amount of stomping around gets it out. I stick with jeans.

Sweat the Load

A towel or rag that helps keep the sweat from getting in your eyes is a good idea. Your shirt will be soaking wet after a few minutes, so don’t count on it as a sweat sponge.

Divide the Labor

The author eschews long sleeves while hammering a hot billet.

When welding damascus on very hot days, one day I do just the first weld to seal the billet. Then the next day, I stretch the billet. The following day, I cut and restack the billet for layer count.

I follow this pattern till I have the billet the way I want it. This takes a lot longer but it doesn’t wear you out at the end of the day.

Then again, sometimes I just work through the heat and sit in my truck with the air conditioning on high. An extra shirt also helps to keep sweat off your vehicle seat.

Keep on Forging

So remember: Drink fluids, limit your time being by the hot forge, stay as cool as possible—and keep forging!

NEXT STEP: Download Your Free KNIFE GUIDE Issue of BLADE Magazine

BLADE’s annual Knife Guide Issue features the newest knives and sharpeners, plus knife and axe reviews, knife sheaths, kit knives and a Knife Industry Directory.

Get your FREE digital PDF instant download of the annual Knife Guide. No, really! We will email it to you right now when you subscribe to the BLADE email newsletter.

Click Here to Subscribe and get your free digital 2022 Knife Guide!
Exit mobile version