Chaves’ OTF utility blade is one fast slicer.

Whether you need a pristine edge for skinning game or a razor-sharp utility blade for daily EDC chores, it is easy to see why replaceable-blade knives have exploded in popularity. Chaves Knives takes this a step further.

The Pleasant Grove, Utah, manufacturer is known for thinking outside the box with its designs and this holds true for its CHUB. A very fast out-the-front (OTF) double-action small pocket utility knife ensures you never have a dull blade, can get it into action no matter what the circumstances,and is fun. Even so, the knife must
perform, so let’s see if the CHUB cuts it.

I started with a standard paper slice to test the factory edge on the replaceable blade. I used graph paper and, as expected, the CHUB’s edge zipped through it quickly, producing clean slices and smooth cuts. The knife’s handle was comfortable, even though it was a tad short for my hand.

Onto single-walled cardboard, the CHUB burned through the medium. I could get used to this performance, as I break down cardboard daily. No folding or sliding, just an aggressive in and out through the material. The handle provided a positive grip, a plus on the more challenging cardboard. As a note, the knife rides very nicely in any pocket.

Slapping Leather

I grabbed a leftover piece of 8-ounce leather to shred. The CHUB was very aggressive on the hide. Vertical slices were fast and easy to control, and with the leather flat on the bench, it sliced through smoothly. If you happen to work with leather, it would be a great job for the CHUB.

Pitting a blade against wood is always a must, so I moved on to some whittling. A ¾-inch dowel proved no problem for the CHUB. The replaceable blade shaved smooth curly cues, but deeper bites were harder on the hand because of the smaller handle. Still, it got the work done.

Just to push the knife a little farther, I cut up some ½-inch sisal rope. The CHUB did 125 crunching cuts, which was impressive, given it was the same blade I started the test with. The action stayed tight and crisp, no play at all. Again, the handle size was challenging in a task that required stronger pressure. But overall, it was a fun challenge.

Lastly, I was back to the graph paper slices. I had a few snags at the bottom of the blade but the front half sliced smoothly. Not bad at all. Job well done by the Chaves Knife crew. I also still had a fresh edge, since all I had to do was push a tab over, flip the blade and close the tab. Pretty simple and fast.

Overall Take

Some people might call it a fad, but the CHUB will cut. Now add in the cool factor of it being an OTF pocket utility knife, and you have a handy knife to use daily. The CHUB is designed to take standard Stanley and Lenox-style blades—2 7/16-inch long, ¾-inch wide—but off brands might not prove compatible.

CHUB OTF Specs
Action: Double-Action OTF Automatic
Body: Aluminum blackened
OAL: 5.125”
Blade Length: 1”
Blade: Utility/Razor
Retail: $250

More Reviews:

• Mike Bradshaw’s Large Hunter Review: Large And In Charge
• Pepperwool Merino MM Review [Field Tested]
• KSW Custom Knives Bushcrafter Review: Upcycled Edge
• Hults Bruk Spika Review: Backwoods Beast