BLADE Show ’25 is the author’s 40th BLADE Show—and counting

In the spring of 1985, my fellow U.S. Army lieutenant and knife collector Fletcher Crews told me about the BLADE Show. Having never heard of it, I asked him what it was.  His response: “It’s like a gun show but with knives.”

Later in May of that year we took our wives on a road trip from Clarksville, Tennessee, to the Holiday Inn and Convention Center in Knoxville, Tennessee, the show’s former time of year and venue. We allowed ourselves four hours to cover the show. (Don’t get ahead of me; we didn’t know what we were in for.) You have undoubtedly seen TV commercials telling you about someplace in Florida that is the “happiest place on earth.” Those who say this have never been to the BLADE Show!

The highlight of the show for me was meeting BLADE Magazine Cutlery Hall-of-Fame® member Jimmy Lile and seeing and handling the Sly II knife he made for the original Rambo movie, First Blood. For those of you who were not fortunate enough to meet Jimmy, he was everything you hear. He was outgoing and friendly, making you feel like he had known you for years. He only made being able to see the knife in person that much better. After all, this is the knife that started me on a path I am still on today.

Heading back to Clarksville, I realized that planning had already started for the 1986 BLADE Show. As it turned out, I would make a life-altering decision shortly after returning home. Several weeks later, my wife Kathy and I were having dinner with Fletcher and his wife Karla. 

Karla said, “If you did this as a business, you could go to more shows and write off your expenses.” Jerry Seinfeld famously said on his TV show, “You don’t even know what a write-off is.” That was true of me then but I still liked the sound of it.  The following week, I went to a CPA and filled out the paperwork to form Robertson’s Custom Cutlery. I realized I had made a tactical error by only allowing four hours for the show. In 1986, I corrected that. I was, in fact, third in line to get in. 

The doors opened and hundreds of people rushed into the room, all taking different paths to the hundreds of tables. I went to the first table closest to me and within 15 minutes was out of money. It was at this show that I learned my next vital lesson. As I walked among the rest of the tables and booths, I realized I had set a land speed record for buyer’s remorse. The essential lesson I learned was to have a plan.

Armed with my recently acquired KNIVES ’86, the plan began to take shape. The book has photos and an equally important index of makers’ contact information in the back. It started me on my path to creating what would become my Robertson’s Maker Market Matrix. In the early days, I used the Matrix exclusively to figure out what specific knives I wanted to buy. 

Using KNIVES ’86 and the information within helped me identify what I wanted and implement my purchase plan. Early in 1987, I started to contact knifemakers, asking them what they were bringing to the show or if they could deliver the particular knife I wanted there. The plan was in place and it was implemented to perfection. I received all five knives I had ordered. With the pressure off, I was allowed to move through the Holiday Inn and Convention Center show hall and really enjoy everything the BLADE Show had to offer.

Gil And Bruce

The 1987 show was memorable for more than just the five knives I bought. I was introduced to legendary Cutlery Hall-of-Famer Gil Hibben, who invited me and others to dinner. He was a gracious host with fascinating stories to tell. At that same show, fellow custom knife purveyor Bob Neal (miss you, buddy) introduced me to Cutlery Hall-of-Famer Bruce Voyles, who owned both the BLADE Show and BLADE, and edited the magazine, too. Bruce couldn’t have been nicer. What impressed me most was his encyclopedic knowledge of older factory slipjoints, multi-blade folders and antique bowies. 

In 1992, Bruce gave me another of my favorite memories of the BLADE Show—he asked me to judge the custom knife competition. I’ve judged at more shows than I can remember, but there is nothing like seeing all those knives from some of the best makers in the world all in one room. Bruce introduced me to current BLADE editor, Cutlery Hall-of-Famer Steve Shackleford, who, during a conversation at the 2006 BLADE Show, asked me if I would like to write an article for BLADE. Nineteen years later he continues to ask me to write for BLADE. Bruce and Steve were also instrumental in having me—sometimes with Bob Neal—conduct seminars for both custom knife collectors and makers at several BLADE shows.

At the 1988 BLADE Show, I set up for the first time. With the exception of the show in 1990, I had a table at each BLADE Show until 2011. Having a table at the BLADE Show was an incredible learning experience. It taught me that there is always more to learn about custom knives. Also at the show, custom knifemaker Dave Broadwell and I collaborated and came up with the final design for the MLR Sub-Hilt Fighter. Since then, Dave has made well over 100 MLRs for me in different configurations.

At a mid-’90s Knifemakers’ Guild Show, I met a talented maker who at the time was making what I considered the finest Japanese tacticals in the world. However, at the 1997 BLADE Show we talked about him making me a few folders. He went home and came up with a knife he called the Q30. He later modified it and the result would become his signature model, the Q36. He went on to win the Best Tactical Folder award at the BLADE Show four years in a row. His name: RJ Martin.

At the 2015 BLADE Show I met Steve Randall and his wife, Alison. Steve reminded me a lot of the exceptional maker John White. Steve’s knives were clean, incredibly well made and fairly priced. Today, table 3R is always my first stop to check out his knives.

For me, there are many people I talk to throughout the year but I only get to see them once a year at the BLADE Show, and that makes the show even more special to me. Two of those fellow knife nuts are Jack Alsop and Alan Snow.

What I appreciate most about the BLADE Show, aside from the knives, is the camaraderie of the people there. They are literally from all over the world. They are willing to share their knowledge that, for many, has taken a lifetime to acquire. Like I said previously, forget that place in Florida. The BLADE Show is the happiest place on earth. See you there!

More On The Blade Shows:

• BLADE Show Beer: Brew That Taps Into Blades
• 2025 BLADE Show Texas Custom Knife Award Winners
• 2025 BLADE Show Texas Factory Knife Award Winners
• 2024 BLADE Show West: Recap Of Salt Lake City Show