Sate your cutting needs with the world’s latest factory knives and sharpeners.
Have an itch that only a new knife will scratch? Look no further as we’ve gathered up a slew of new factory blades fresh on the market and ready to please. There is a load of pocket and EDC options in this haul, but there are a few outdoor-angled knives and knife accessories thrown in for good measure.
Hogue Knives Mysto
KNIFE PATTERN: EDC
DESIGNER: Jim Bruhns
BLADE LENGTH: 3.4”
BLADE STEEL: CPM MagnaCut stainless
BLADE GRIND: Compound hollow
BLADE OPENER: Thumb studs
HANDLE MATERIAL: 6Al-4V titanium
LOCK: ABLE Lock®
POCKET CLIP: Ambidextrous, blade tip up
WEIGHT: 3.5 ozs.
CLOSED LENGTH: 4.4”
SPECIAL FEATURES: Thumb studs and backspacers anodized red
COUNTRY OF ORIGIN: USA
MSRP: $329.95-$349.95
AVAILABLE: Now
hogueinc.com/knives
Kershaw Bel Air
KNIFE PATTERN: EDC
BLADE LENGTH: 3”
BLADE STEEL: CPM MagnaCut stainless
ROCKWELL HARDNESS: 62-64 HRC
BLADE GRIND: Flat
HANDLE MATERIAL: 6061-T6 aluminum
BLADE OPENER: Thumb stud
LOCK: DuraLock
POCKET CLIP: Right/left deep carry, blade tip up
WEIGHT: 2.9 ozs.
CLOSED LENGTH: 4.2”
COUNTRY OF ORIGIN: USA
MSRP: $249.99
AVAILABLE: Now
kershaw.kaiusa.com
Bear OPS Rancor IX
KNIFE PATTERN: EDC
BLADE LENGTH: 2.75”
BLADE MATERIAL: D2 tool steel
BLADE GRIND: Taper
HANDLE MATERIAL: Zytel
BLADE OPENER: Flipper and/or thumb studs
LOCK: Slidelock
POCKET CLIP: Reversible, blade tip-up carry
WEIGHT: 2.6 ozs.
CLOSED LENGTH: 4 3/8”
COUNTRY OF ORIGIN: USA
MSRP: $100.99
AVAILABLE FOR SALE: Now
bearandsoncutlery.com
Maserin Power
KNIFE PATTERN: EDC
DESIGNER: Sergio Consoli
BLADE LENGTH: 3.149”
BLADE STEEL: N690 stainless
BLADE GRIND: Flat
HANDLE MATERIAL: Fat Carbon
LOCK: W-Lock
POCKET CLIP: Yes
WEIGHT: 3.174 ozs.
CLOSED LENGTH: 4.33”
COUNTRY OF ORIGIN: Italy
MSRP: $197
AVAILABLE: April
maserin.com
A.G. Russell Knives Power Ball 4
KNIFE PATTERN: EDC
DESIGNER: BLADE Magazine Cutlery Hall-Of-Fame® member A.G. Russell
BLADE LENGTH: 3.25”
BLADE MATERIAL: D2 tool steel
ROCKWELL HARDNESS: 60-61 HRC
BLADE GRIND: Flat sabre
HANDLE MATERIAL: Blue (shown) or green G-10
BLADE OPENER: Thumb stud
BLADE FINISH: Handrubbed
LOCK: Design inspired by Cutlery Hall-Of-Famer Blackie Collins
POCKET CLIP: Deep pocket left or right hand, blade tip up
WEIGHT: 3.7 ozs.
CLOSED LENGTH: 4.25”
SPECIAL FEATURES: Bold G-10 colors
COUNTRY OF ORIGIN: China
MSRP: $135
AVAILABLE: Now
agrussell.com
Fox Cutlery ATCF Original Gangster
KNIFE PATTERN: EDC
DESIGNER: BLADE Magazine Cutlery Hall-Of-Fame® member Bob Terzuola
BLADE LENGTH: 3.54”
BLADE STEEL: CPM MagnaCut stainless
BLADE GRIND: Flat
BLADE FINISH: Stonewashed
HANDLE MATERIAL: Coarse stonewashed titanium
BLADE OPENER: Thumb disc
LOCK: Linerlock
POCKET CLIP: One-side titanium
WEIGHT: 6.34 ozs.
CLOSED LENGTH: 5.04”
SHEATH: Nylon pouch
COUNTRY OF ORIGIN: Italy
AVAILABLE: May
foxknives.com
Work Sharp Rolling Knife Sharpener
ABRASIVES: Discs in coarse diamond, fine diamond and ceramic
GRITS: 320, 600, ceramic
ANGLE GUIDE: Magnetic angle block provides four options: 15, 17, 20 and 25 degrees
DIMENSIONS: 3.75” L x 2.6” W x 2.6” H
BODY MATERIAL: Metal, soft touch rubber, plastic
WEIGHT: 1.9 lbs.
KNIFE TYPES SHARPENED: Large, small and kitchen knives and pocketknives
EDGE TYPES SHARPENED: Plain
SPECIAL FEATURES: Tri-axle drive system follows blade length smoothly, and Soft Touch grip adds comfort and safety
COUNTRY OF ORIGIN: Designed, calibrated and quality checked in Ashland, Oregon, using foreign components
MSRP: $150
AVAILABLE: Now
worksharptools.com
Kellam Knives Worldwide Jouni 80
KNIFE PATTERN: Puukko
DESIGNER: Jouni Kellokoski
BLADE LENGTH: 4 7/8”
BLADE STEEL: Stainless
BLADE GRIND: Scandi
HANDLE MATERIAL: Arctic curly birch
WEIGHT: 3.8 ozs.
OVERALL LENGTH: 9.5”
SPECIAL FEATURES: First 100 are numbered
SHEATH: Leather dangler
COUNTRY OF ORIGIN: Finland
MSRP: $169.98
AVAILABLE: Now
KNIFE TO KNOW: The knife commemorates the 80th birthday of its designer and company headman, Jouni Kellokoski.
kellamknives.com
Queen Cutlery Slipjoint Pocketknife
BLADE LENGTHS: Clip 2 5/16”, spey 2 5/64” and sheepsfoot 2”
BLADE MATERIAL: 1095 carbon steel
BLADE GRIND: Flat
HANDLE MATERIAL: Stag
PINS, SHIELD & BOLSTER: Nickel silver
WEIGHT: 2.8 ozs.
COUNTRY OF ORIGIN: USA
MSRP: $93.99
AVAILABLE: Now
queencutleryhistory.com
Cold Steel Caledonian
KNIFE PATTERN: EDC
BLADE LENGTH: 4.25”
BLADE STEEL: CPM 20CV stainless
BLADE GRIND: Hollow
HANDLE MATERIAL: Forged carbon fiber
BLADE OPENER: Stud
LOCK: Linerlock
POCKET CLIP: Deep carry, blade tip up
WEIGHT: 5.4 ozs.
CLOSED LENGTH: 5 1/8”
SPECIAL FEATURES: All titanium frame and liners
COUNTRY OF ORIGIN: Taiwan
MSRP: $499.99
AVAILABLE: May
coldsteel.com
Coast Founder’s Series Origin
KNIFE PATTERN: EDC
DESIGNER: Doug Hutchens
BLADE LENGTH: 3.35”
BLADE STEEL: 9Cr18MoV stainless
BLADE GRIND: Flat
BLADE FINISH: Black titanium nitride
BLADE OPENER: Flipper tab
HANDLE MATERIAL: Stainless steel damascus
LOCK: Framelock
POCKET CLIP: Stainless steel, blade tip down
WEIGHT: 2.4 ozs.
CLOSED LENGTH: 4.5”
COUNTRY OF ORIGIN: China
MSRP: $99.99
AVAILABLE: Now
coastportland.com
Alliance Designs EZE 2.0
KNIFE PATTERN: EDC flipper folder
DESIGNER: Ray Laconico
BLADE LENGTH: 3.15”
BLADE STEEL: Elmax stainless
BLADE GEOMETRY: Laconico’s “Angry Grind”
BLADE PATTERN: Tanto
HANDLE MATERIAL: Titanium integral
BLADE OPENER: Flipper tab
LOCK: Framelock
POCKET CLIP: Blade tip up
WEIGHT: 4.69 ozs.
CLOSED LENGTH: 4.5”
SPECIAL FEATURES: Chad Nichols Dark Ti accents
COUNTRY OF ORIGIN: China
MSRP: $495
AVAILABLE: Now
KNIFE TO KNOW: Clever grooves at the base of the handle provide a secure grip; the integral handle design is milled from a solid block of titanium; re-engineered flipper tab with gimping.
alliance-designs.com
Blackbird Products Dominator
KNIFE PATTERN: EDC
DESIGNER: David McHan
BLADE LENGTH: 4”
BLADE MATERIAL: D2 tool steel
BLADE GRIND: Hollow
HANDLE MATERIAL: G-10
PIVOT: Ball bearings
LOCK: PLX Bar Lock
CLOSED LENGTH: 4.5”
COUNTRY OF ORIGIN: Assembled in USA, globally sourced components
MSRP: $74.99
AVAILABLE: June
blackbirdproducts.com
Bradford USA Guardian 4.2
KNIFE TYPE: Fixed blade
BLADE LENGTH: 4.825”
BLADE STEEL: CPM MagnaCut stainless
BLADE GEOMETRY: Sabre and full-height grinds
HANDLE MATERIAL: G-10, Micarta® or carbon fiber
WEIGHT: 6.7 ozs.
OVERALL LENGTH: 9.375”
SHEATH TYPE/MATERIAL: Vertical bridle; leather
COUNTRY OF ORIGIN: USA
MSRP: $269
AVAILABLE: Now
bradfordknives.com
Reate PL-XT
KNIFE PATTERN: EDC
BLADE LENGTH: 3”
BLADE STEEL: Nitro-V stainless
BLADE FINISH: Stonewashed or black PVD
HANDLE MATERIAL: Micarta® or G-10
BLADE OPENER: Thumb studs
LOCK: Pivot Lock
WEIGHT: 4.4 ozs.
CLOSED LENGTH: 3.9”
COUNTRY OF ORIGIN: China
MSRPs: $112 (stonewashed) and $117 (black PVD)
AVAILABLE: Now
reateknives.com
Halfbreed Blades Compact Clearance Knife XL
KNIFE PATTERN: Fixed blade
BLADE LENGTH: 5.11”
BLADE MATERIAL: Bohler K110 D2 tool steel
ROCKWELL HARDNESS: 59-60 HRC
BLADE PATTERN: Spear point
BLADE FINISH: Teflon coated
HANDLE MATERIAL: G-10
WEIGHT: 2.32 ozs.
OVERALL LENGTH: 9.29”
SHEATH: Injection-molded plastic
COUNTRY OF ORIGIN: Comprises Australian and Taiwanese make
MSRP: $245
AVAILABLE: Now
halfbreedblades.com
Smith’s Eclesis Model 51394
KNIFE PATTERN: EDC flipper folder
BLADE LENGTH: 3”
BLADE STEEL: 3Cr13 stainless faux damascus
ROCKWELL HARDNESS: 59-60 HRC
BLADE PATTERN: Drop point
HANDLE MATERIAL: G-10
LOCK: Framelock
POCKET CLIP: Blade tip up
COUNTRY OF ORIGIN: Offshore
MSRP: $32.99
AVAILABLE: Now
smithsproducts.com
Puma SGB Hunter’s Pal
KNIFE PATTERN: Fixed-blade hunter
BLADE LENGTH: 4”
BLADE STEEL: 1.4116 German cutlery stainless
ROCKWELL HARDNESS: 55-57 HRC, proofmarked
BLADE GRIND: Flat
HANDLE MATERIAL: Choice of black or white G-10, jacaranda wood, olive wood, Commando Stag, stag
WEIGHT: 4.69 ozs.
OVERALL LENGTH: 8”
SHEATH: .1” vegetable tanned leather
COUNTRY OF ORIGIN: China
MSRP: $197.99 (stag)
AVAILABLE: Now
KNIFE TO KNOW: The knife is the Puma SGB version of, and a tribute to, the decades-old Puma GmbH Hunter’s Pal 116397.
pumaknifecompanyusa.com
Ocaso The Delos
KNIFE TYPE: Gentleman’s folder
DESIGNER: Kurt Merriken
BLADE LENGTH: 3”
BLADE STEEL: 120-layer German damascus
ROCKWELL HARDNESS: HRC 60-61
BLADE GRIND: Hollow
BLADE @ THICKEST: .12”
BLADE PATTERN: Modified tanto
BLADE FINISH: Rose pattern damascus
HANDLE MATERIAL: Titanium and Fat Carbon Black Dunes or Dark Matter Blue
LOCK: Framelock
BLADE OPENER: Thumb stud
PIVOT MATERIALS: Stainless steel caged bearings
POCKET CLIP: Contoured titanium
WEIGHT: 3 ozs.
CLOSED LENGTH: 4”
COUNTRY OF ORIGIN: Italy
MSRP: $524.99-$549.99
AVAILABLE: Spring
ocasoknives.com
Coast SP425
SHARPENER TYPE: Diamond whetstone
DESIGNER: Doug Hutchens
ABRASIVE: Diamond plated onto fiberglass/nylon substrate
GRITS: 400 and 600
DIMENSIONS: 9” long
BODY MATERIAL: Nylon w/fiberglass fill
WEIGHT: 2.1 ozs.
KNIFE TYPES SHARPENED: All plain-edge models
SPECIAL FEATURE: Folding sharpener
COUNTRY OF ORIGIN: China
MSRP: $19.99
AVAILABLE: Now
coastportland.com
Check Out More Knife Drops:
- Production And Custom Kitchen Kinves
- Production And Custom Damascus And Stainless Steel Knives
- Production And Custom Large Blade Knives
NEXT STEP: Download Your Free KNIFE GUIDE Issue of BLADE Magazine
BLADE’s annual Knife Guide Issue features the newest knives and sharpeners, plus knife and axe reviews, knife sheaths, kit knives and a Knife Industry Directory.Get your FREE digital PDF instant download of the annual Knife Guide. No, really! We will email it to you right now when you subscribe to the BLADE email newsletter.