Home Authors Posts by Mike Ableson

Mike Ableson

Butterfly Knife Tricks: From Easy To The Complex

0

Opening A Balisong Is One Of The Funnest Things You Can Do With A Knife. There Are Numerous Butterfly Knife Tricks You Can Learn To Up Your Game.

Opening most knives is either wholly forgettable or simply a fun way to fidget. Nail nicks, thumb studs, and opening holes like those on Spyderco blades are all common ways to open a knife that don’t leave much of a mark.

However, the butterfly knife stands alone. It’s so dynamic to open and manipulate that there are professional competitions showcasing new and exciting ways to make the knife dance in the hand. Once you know how to open and close the knife safely you’ll be able to build a skillset of more and more difficult, exciting butterfly knife tricks.

How Do I Open A Butterfly Knife

Before opening a butterfly knife it’s important to know which handle you’re holding. Every balisong has two handles: a safe handle and a bite handle. The safe handle is straightforward; holding this handle will protect your hand from the sharp edge of the blade. 

The bite handle is one the side of the sharpened edge. Early on it’s incredibly important to keep your hand off of that handle lest you slice off a finger. More advanced tricks will have you switching handles, but you should only do that once you’ve mastered basic skills and can move the knife safely.

Luckily, there are many different types of trainer butterfly knives available to learn the moves safely without even having to worry about a sharp edge. These knives are made from steel, aluminum, and even plastic. We have a whole primer on finding the best trainer butterfly knife.

What Are The Different Butterfly Knife Tricks?

Just like other sports like skateboarding and figure skating, where tricks involve spins and flips, the names of balisong tricks all have fantastical names. From the more simply-named rollovers and aerials to the blender, the Van Gogh and the Neck Catch, and the Ladder Aerial to Reverse Chaplin, the names are as fun as the moves themselves.

And everything builds off basics. Once you can smoothly and confidently open the knife, you can learn rollovers (which involve rolling the knife around your thumb) and keep escalating until you’re throwing the knife in the air and catching it again in one smooth motion.

In the video below, professional knife flipper Corbin Lovins goes in-depth into all things balisong tricks from the basic to the complex. The young Hoosier won the balisong flipping tournament at Blade Show in 2019 and debuted his own line of Butterfly Knives, Strix, at the most recent Blade Show in Atlanta.

Read More

First Look: Spyderco Endela Wharncliffe K390

0

The New Endela Wharncliffe K390 From Spyderco Is The Newest In The Endela Line And Uses A Distinctive Blade Design And State-Of-The-Art Tool Steel To Stand Out.

When Spyderco releases new knives they’re always fun and push the boundaries of what an EDC can be. In the case of the new Endela Wharncliffe K390, there’s so much new about it that it stands out even in comparison to other knives from the company.

It all starts with the K390 MICROCLEAN blade steel. This all-new particle metallurgy tool steel was designed with wear resistance and compressive strength in mind. The straight-edged blade takes the steel and turns it into an exceptional folder that’s tough enough to handle all sorts of intense industrial applications. At 3.42 inches long, the blade is beefy enough to attack big tasks while compact enough for more intricate work.

The blade is married to an FRN handle, and the back lock keeps the whole thing solid and firm in your hand when deployed. The ambidextrous pocket clip allows for easy carry on either side of your body, in your purse, or in a travel pack. 

Once again, Spyderco has knocked it out of the park with their newest addition to the Endela line.

MSRP: $197.50

Read More

Gravity Knives: What You Need To Know

0

Fast-Opening, Gravity Knives Are Banned In Many Places But Are Incredibly Versatile And Fun To Use.

When it comes to pocketknives there are all sorts of different ways to deploy the blade. Many knives can be opened with a thumb stud or a nail nick. Some open with a button press. And then there’s the gravity knife, which opens with the help of the force of gravity. The blade is in the handle and opens by moving a segment of the knife and allowing the blade to fall out.

These knives came to prominence in the 1950s and remain a popular, if controversial, style of EDC. 

How Exactly Does A Gravity Knife Work?

The only way to deploy the blade is via gravity. This means that the simplest way to do that is by pointing the knife downward and pulling up on the handle although you can also deploy the blade by flicking it open like an assisted-opening folder. Of course, that could pose a safety issue if the knife is pointed toward you.

Neeves Knives has an excellent breakdown of the Reate EXO gravity knife, how it works, and what makes them so fun to use.

As you can see, the EXO is an incredibly smooth OTF gravity knife. The blade is made from Elmax super steel with a satin finish. The titanium handle with micarta scales provides a strong, resilient grip, and the Kydex sheath allows you to carry the knife safely.

In terms of contemporary gravity knives, the EXO could conceivably be called the gold standard.

Why Is The Gravity Knife So Controversial?

According to knife enthusiast Mike Crenshaw, switchblade and gravity knife laws date from the 1950s when lawmakers worked to link switchblades/automatics and gravity knives to criminals and minorities. “The lawmakers’ goal was to frighten the public and exploit that fear for political gain,” Mike wrote. Any knife that didn’t open with a nail nick and two hands “had” to be a weapon used only by “the wrong sort of person.” As Mike noted, “Any spring-loaded side-opening or OTF automatic and any gravity-opening side opener or OTF was exploited to that end. Any collector of these knives knows their history and their utility, in spite of the bans. Meanwhile, modern gravity knives are having a renaissance, whether those that slide out the front or swing out the side.” Also, modern designs and materials make the resulting knives smoother, stronger and more useful than ever before.

Fortunately, the laws against gravity knives are loosening. A New York state statute banning gravity knives was struck down by a federal district court in 2019, and many states from coast to coast explicitly allow the sale and carry of gravity knives. Despite the law being struck down at a state level, New York City still forbids the public transport of gravity knives. 

Delaware is the lone state currently with an explicit ban on gravity knives. Maryland has an odd law where it is legal to own a gravity knife but illegal to both conceal carry and open carry the blade. It’s also illegal to conceal carry in North Dakota and West Virginia. 

Types of Gravity Knives

Many of the top factory makers don’t invest in making gravity knives. That leaves smaller, independent companies in the space making interesting and stylish pieces. You’ve seen the Reate EXO in the video above, and it’s a beauty. Below is another fine example of a small maker making a high-end gravity knife.

Paragon Warlock

Paragon Warlock Cross Knife Mystic Blue Aluminum
Paragon Warlock Cross Knife Mystic Blue Aluminum

This North Carolina-based maker Paragon Knives has created a whole line of gravity knives with the Warlock. The line is extensive. There have been 19 different versions of the Warlock, all in different colors, blade finishes, and blade grinds. Every version comes with a CPM-S30V blade that is four inches long with an aluminum handle. 

Unlike the EXO from above, this knife is actually, if only technically, a button release. Rather than the button push rapidly deploying the blade out the front it separates the handle and allows the blade to swing out and open.

YouTuber Talon Sei has an excellent breakdown of how the knife opens and his thoughts on the piece. I even set it to start right where the review begins. It really is a beautiful knife no matter the color you choose.

MSRP: $300

First Look: Kizer Assassin

0

The New Kizer Assassin Is A Smooth And Nimble EDC. This Is An Affordable, High-Quality Folder That Is Fun To Use.

The new Assassin folder from Kizer is a new EDC from the factory maker, and it’s an exciting knife. With a blade made from 154CM and a red micarta handle, the Assassin makes a visual splash the moment you lay your eyes on it.

The super smooth thumb stud makes opening a breeze, and the flipper/button lock keeps the steel rigid and secure when deployed. Carlos Elstner really did a heck of a job in designing this knife to make it fun. 

The Assassin is simplicity done at a high level. There are no extra bells and whistles on this piece; it’s just a complete, well-made knife that you’ll be able to use for years. The fact that it’s so inexpensive is the cherry on top. 

MSRP: $69

Read More

First Look: Gerber Affinity

0

Sometimes A Simple Knife Is All You Need, And This New Folder From Gerber Looks Sharp And Is Sharp.

The new Affinity from Gerber is a straightforward, plain-edge folding EDC. That’s not a slight but a compliment. The piece comes in two colorways and both shine thanks to their construction and ease of use.


It starts with the aluminum version that has a 7CR blade and an easy-access frame lock. This allows the cutting edge to be exactly where you expect it and allows you to slice with confidence knowing the blade is secure.

The handle is highly-polished for a clean, modern look. The ergonomic design, along with the adjustable thumb stud, allows you to make the knife your own and have it feel perfect in your hand. The pocket clip allows for easy carry as it discretely tucks away.

Gerber Affinity - Copper
Gerber Affinity – Copper

The other version is the copper. The copper features all the same features as the aluminum version with two key differences. The most obvious are the machined copper scales that give the blade a tough-looking exterior.

The other key difference is the in the blade; the copper has a blade made from D2 steel, which drives up the price although both are affordable folders.

MSRP: $45 (aluminum), $58 (copper)

Read More

First Look: Benchmade Osborne Mini

0

The Newest Edition to Benchmade’s Osborne Line, The Mini, Takes Cues From Norse Mythology And Even The Sea.


The Benchmade Osborne is one of the most popular lines of pocketknives out there today. The new Mini is Benchmade at its best. The design takes inspiration from Norse mythology and the Baltic Sea. 

The blade is made from a new pattern of Damasteel called Ægir™ with a 58-60 HRC, and the reverse tanto is 2.92 inches long. The beefy fat carbon Arctic Storm handle features blue accents that are inspired by the waters of the Baltic and gold-plated floating back spacers to give the knife a real mean look to it. 

The entire piece comes in at just 2.24 total ounces and is a visually-stunning entry to round out Benchmade’s 940 Osborne family of knives. This one is certainly pricey, and it’s worth it if you’re looking for a true one-of-a-kind EDC.

MSRP: $700

First Look: Kershaw Recap

0

This Tiny New Multi-Tool From Kershaw May Not Have The Array Of Tools Like Others On The Market But Makes Up For It With A Fun, New Design.

When you think of a multi-tool it’s usually a beefy type of tool with pliers and blades and maybe wrenches and wire strippers on it. However, the new Recap from Kershaw breaks the mold by taking the multi-tool to its minimalist extreme.

The Recap is roughly the size of a housekey. Made of stainless steel, there are no folding elements to the tool, just the main body. At just .3 ounces it’s as light as you’d expect but features three tools.

The first, and most noticeable, is the bottle opener. The other tools come as a combination pry bar/flathead screwdriver. The minimalist steel construction means all of the tools are strong and robust with nothing superfluous in the way.

Yes, there is no blade, a staple of most multi-tools, but this would be excellent on a keychain. If you want some type of tool with you wherever you go, especially if you frequent places like sporting events or museums where you can have an EDC or traditional multi tool on your person.

MSRP: $6.39

Read More

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement