Home Authors Posts by Steve Shackleford

Steve Shackleford

Cutting Critique: Spyderco Persistence

Steve Shackleford
-
0
Cutting Critique: Spyderco Persistence
Consider the Spyderco Persistence—a small knife that cuts like a bigger one.
The Spyderco Persistence is a small knife that cuts like a bigger one and gets the once-over in our “Cutting Critique.”

The Spyderco Persistence is one of those compact cutting knives you may or may not like—depending on your tastes in general and how the knife fits your hand.

I have a medium-size hand and if I hold the handle in the standard grip, half of my little finger overlaps the butt. That’s bordering on too small for me.

However, for detail or draw cuts where I place my finger atop the blade spine, the fit is just about perfect. The 2.75-inch blade is 1.25 inches at its widest and tapers quickly to the point. Under 3 inches in blade length is a good thing in terms of many legal length limits. (Be sure to check your local and other pertinent knife laws.)

The G-10 handle material is good and solid and provides a nice abrasive-type feel for sure gripping for most any type of cutting.

The clip is reversible for tip up or tip down right-hand carry.

The plain-edge blade of 8Cr13MoV stainless steel out of the box is razor sharp and is a cutting moose. I like the blade shape, which is along the lines of the Spyderco Caly I carry on a regular basis.

The Michael Walker LinerLock@ is nice and tight and has a good spring to it that makes you work just a bit—though not too much—to push it open. I like that because it reinforces the notion that the lock will not disengage easily—always a good thing.

The Persistence is one of Spyderco’s knives made in China, and as many industry observers are noting, the Chinese are getting better and better at making knives—and the Persistence is an excellent example of this improvement.

At 4 ounces the Persistence may seem a bit heavy to some for a knife of its size (4.125-inch closed length), but not me. I like the overall weight and feel. It’s a small knife that cuts like a bigger one.

For more info on how to get your Persistence, click on www.shopblade.com/persistence-black-g-10-plainedge-w8476?lid=ssfbbl070313

“Art of the Knife” Starts July 10

Steve Shackleford
-
0
“Art of the Knife” Starts July 10

The Art of the Knife, an exploration of the history of the handmade knife as a tool of value in both function and aesthetics, will run July 10 through Aug. 18 at the Guilford Art Center in Guilford, Connecticut.

Mace Vitale, a journeyman smith in the American Bladesmith Society and also a blacksmith and coppersmith, will jury the invitational event. An awarding-winning bladesmith and a regular exhibitor at the BLADE Show & Living Ready Expo (www.blademag.com), he also serves as an instructor at the Guilford Art Center.

Juried by ABS master smith Mace Vitale, maker of this damascus dagger, the Art of the Knife will run July 10-Aug. 18.
Mace Vitale, maker of this damascus dagger, will jury the Art of the Knife exhibit beginning July 10.), Vitale also serves as an instructor at the Guilford Art Center.

Vitale started out working with his father in a pre-cast concrete business that specialized in architectural reproduction. Mace learned a lot from his dad, from how to use tools to “how to make something from nothing.”

Mace bounced from job to job after the family business closed in the 1990s until he found work as a coppersmith. “Its effect on me was less than subtle,” he writes on his website. “I was hooked!”

 

He attended a blacksmithing class at the Guilford Art Center and subsequently found out about the ABS. He took the ABS “Introduction fo Bladesmithing” class and has been making knives ever since, obtaining his ABS journeyman smith stamp in 2006.

 

“I pride myself on my attention to detail,” he observed. “The way I see things, the only way I’ll possibly be able to garner a customer’s satisfaction is through my own satisfaction. I fashion everything I make as if it will be my own.”

 

The opening reception for the exhibit will be Wednesday, July 10, from 5 to 7 p.m. It is free to the public, as is admission to the exhibit. Gallery hours are Monday through Saturday, 10 a.m. to 4 p.m., and Sunday from 12 to 4 p.m.

New Alliance Foundation sponsors the exhibit in part.

For more information contact the Guilford Art Center 203-453-5947 or visit www.guilfordartcenter.org.

ABS Youth Hammer-In at SMKW June 28-30

Steve Shackleford
-
0
ABS Youth Hammer-In at SMKW June 28-30

The American Bladesmith Society (ABS) Youth Hammer-In will be held Friday through Sunday, June 28-30, at Smoky Mountain Knife Works in Sevierville, Tennessee.

Youths from all over the country will descend on Sevierville to learn how to forge a knife under the expert direction of ABS master, journeyman and apprentice smiths. Safety is always the No. 1 concern when forging, and that concern is magnified when children are involved. The ABS has an exemplary record in this regard, and its bladesmiths/teachers are among the finest in the world. Leather shoes or work boots (no tennis shoes), cotton shirts and long cotton pants, work apron and leather work gloves will be the uniform of the day. Safety glasses will be provided. Feel free to bring your favorite hammer and tongs.

Classes will include safety talks, forging demos, hand finishing techniques, a chalk talk on handles and guards, individual instruction on the anvil and more. Lunch and dinner will be provided.

The hammer-in is open to participants ages 9 to 18 who are accompanied by a parent or guardian. Registration fee is $65.

While there, the kids and their parents/guardians can tour Smoky Mountain Knife Works (SMKW), one of if not the world’s largest retail knife stores. The latest in knives, sharpeners, knife accessories, displays, knife maintenance kits, tomahawks, swords and everything that has to do with cut are on display and for sale.

SMKW is also home to the National Knife Museum, which houses an incredible array of antique pocketknives, custom knives, swords and much more. Tour the facility’s historical displays to learn all about the history of man’s oldest tool in a modern, air-conditioned environment.

For more information on the ABS Youth Hammer-In, contact BLADE Magazine Cutlery Hall-Of-Fame© (www.blademag.com) member Houston Price 865-397-0053 choustonprice.att.net or visit www.americanbladesmith.com.

For the latest in knives and knife news, stay tuned to www.blademag.com.

ABS journeyman smith Wes Byrd instructs young students on the art of the forged blade at a past ABS youth hammer-in.
ABS journeyman smith Wes Byrd instructs youngsters at a past ABS Youth Hammer-In.

New Measure Will Revamp Alaska Knife Law

Steve Shackleford
-
0
New Measure Will Revamp Alaska Knife Law

With the stroke of a pen, Alaska Gov. Sean Parnell has signed a new measure known as HB33 that will result in sweeping reform of Alaskan knife law.

Northern Knives retail knife store in ??????, Alaska, will be among the many who benefit from Alaska's sweeping new knife reform law. (Northern Knives photo)
Ray Thibault, owner of Northern Knives in Anchorage, Alaska, was among those who witnessed the signing of Alaska’s sweeping new knife law. (Northern Knives photo)

The new law will go into effect Sept. 18. Until then, however, existing Alaska knife laws remain in place.

According to Knife Rights, HB33 will legalize the possession, transfer and carry of automatic knives, aka switchblades, and also enact knife law pre-emption, which repeals all local knife laws and prevents new ones from being enacted—in this case, in Alaska.

Alaska will become the 7th state to enact knife law pre-emption, Knife Rights reported.

The new law will be particularly beneficial to the state’s outdoor and hunting industries, both of which rely heavily on hunters and outdoors people—and most hunters and many who spend time outdoors use and carry knives.

Knife law pre-emption, meanwhile, prevents the oppressive practice used by many towns, cities and counties within states whereby the knife laws are contradictory and you may literally be legal, illegal and then legal again when you carry a knife and pass from town to city to county.

Gov. Parnell invited Todd Rathner, Knife Rights director of legislative affairs, to the signing ceremony in Palmer, Alaska. Also in attendance were Ray Thibault of Northern Knives retail knife store, Sen. Charlie Huggins, HB33 Sponsor Rep. Mark Neuman, House Speaker Rep. Mike Chenault, Rep. Wes Keller and Rep. Bill Stoltze.

For more information on the new law and pro-knife laws in general, contact Knife Rights and/or stay tuned to www.blademag.com.

ABS Announces 1st School Outside USA

Steve Shackleford
-
0
ABS Announces 1st School Outside USA
An example of knives made in Belgium is the Hurak Fighter by new ABS journeyman smith Samuel Lurquin. (SharpByCoop.com photo)
The ABS will open a new bladesmithing school in Belgium in October. The Hurak is by Belgium’s Samuel Lurquin, who earned his ABS journeyman smith stamp at the 2013 BLADE Show. (SharpByCoop.com photo)

The American Bladesmith Society (ABS) will offer its first-ever bladesmithing school outside the USA beginning in October.

Operated in partnership with The Forge at Ostiches, Belgium, the school’s first class will be “Introduction to Bladesmithing.” Limited to seven students, the class will have as its primary instructor ABS master smith Jean-Paul Thevenot of Dijon, France. Belgium’s Dirk Bourguignon and Frederic Taquet, both ABS bladesmiths, will assist.

The school site is in a beautiful village south of Brussels. Accommodations are nearby within two to three miles. English will be spoken.

The first ABS school of bladesmithing outside the USA was approved in a vote of the ABS Board of Directors during the ABS annual meeting at the 2013 BLADE Show & Living Ready Expo (www.bladeshow.com) May 31-June 2.

The Belgian facility is the fourth ABS school of bladesmithing. The others are the original—the Bill Moran School of Bladesmithing in Old Washington, Arkansas—and the Haywood Community College  in Clyde, North Carolina, and the New England School of Metalwork in Auburn, Maine.

“We now have members in 18 countries,” noted ABS Webmaster Dan Cassidy, “and it is not unusual for my wife Sally and I to communicate with our ABS members around the world in Spanish, Portugese and French on a routine basis. The Internet makes all of this possible today.”

Cassidy credited ABS master smith and new ABS president Joe Keeslar with making the new school possible. Winner of the 2013 BLADE Magazine Industry Achievement Award, Keeslar has been a groundbreaker in bringing modern bladesmithing to both France and Belgium. “Joe was the one who made all the arrangements for the new school,” Cassidy noted, “and it was done over the course of more than a year.”

For information on dates, tuition and accommodations for the new school, contact [email protected], [email protected] or [email protected].

For the latest in knife news, stay tuned to www.blademag.com.

New BLADE on Newsstands Today!

Steve Shackleford
-
0
New BLADE on Newsstands Today!

The knives from the Battle of Gettysburg, the best EDCs for your money, the blades of summer and the hottest flipper folders are but a sample of the topics covered in the new BLADE® (www.blademag.com), on newsstands TODAY!

On the eve of the battle’s 150th anniversary, we caught up with Paul Shevchuk, museum specialist at the Gettysburg Museum of the American Civil War. He was most forthcoming in providing pictures of and information about the knives, bayonets and other edged tools used by both sides in Pennsylvania in 1863. From a Confederate saber bayonet found on a Gettysburg street after the battle to side knives, pocketknives, D-guard bowies and more, Shevchuk’s contributions to the story make for an enlightening glimpse on how soldiers on both sides used their knives during the War Between the States.

Joe Kertzman tapped the know-how of a number of industry experts to get the lowdown on today’s best EDCs for the money. From the damascus and ebony of the Boker Plus Damascus Gent II—this issue’s cover knife—to the CRKT Carajas designed by Flavio Ikoma and many more, you’re bound to find an EDC that fits your pocket and pocketbook.

The Boker Plus Damascus Gent II graces the cover of the new BLADE®.
The new BLADE® features the Boker Plus Damascus Gent II on the cover.

Speaking of EDCs, it’s always good to know what the legal ramifications are when you carry a knife. Mike Haskew consulted such industry authorities as attorney Evan Nappen, AKTI Executive Director Jan Billeb and Knife Rights’ Doug Ritter for their recommendations on what you need to consider when you carry a knife.

With the beginning of summer mere days away, it’s time to replenish your summertime blade array. James Morgan Ayres suggests any number of ways to do it—including camping, picnic and just about every other knife need in the good ol’ summertime—in “The Blades of Summer.”

There are many more entertaining stories in the new BLADE (www.blademag.com). Check it out on newsstands NOW!

 

The Bermans: Valued Friends of Custom Knives

Steve Shackleford
-
0
The Bermans: Valued Friends of Custom Knives
Shelley and Sarah Berman long have been champions of custom knives. (Dave Harvey photo)
Shelley and Sarah Berman show off some of the custom knives in their collection. (Dave Harvey photo)

The custom knife industry has few better friends than Shelley and Sarah Berman, and that point was driven home once again when Shelley wrote about custom knives in the May 31 issue of The Wall Street Journal.

A long-time comedian and actor, Shelley penned the story titled “The Comedian in the Tomato Patch” in the WSJ edition that appeared the Friday of the 2013 BLADE Show & Living Ready Expo (www.bladeshow.com). An accompanying picture showed Shelley and Sarah working the tomato patch in their garden. While Shelley started off talking about his garden, he wrote more about his custom knife collection and damascus steel than anything.

“I collect custom knives,” he wrote in the WSJ story. “In many cases, I know—or knew—the maker. Many of my knives are one of a kind. Some of the great knifemakers are no longer with us. Some of the younger knifemakers are fine at the trade, though many of us old-time collectors still respect and revere the ones we’ve known … One section of the knives in my collection is mostly damascus process. In every case, one side of the blade has an almost scattered pattern, but, oh, what a blade. Frankly, I am very proud of my knife collection.”

Shelley’s affinity for custom knives is well known to many BLADE (www.blademag.com) readers and many in the custom knife industry. He has written stories about his knives and has been interviewed about his collection in BLADE. He has attended any number of custom knife shows over the years, including the California Custom Knife Show, the Solvang Custom Knife Show, the Art Knife Invitational and the Knifemakers’ Guild Show. In fact, he has performed his comedy act at a number of knife shows, including a most memorable performance at the 25th Anniversary Guild Show in Orlando, Florida.

Hats off to Shelley and Sarah Berman—two class acts and valued friends of the custom knife industry.

Read more about custom knives in the new Knives 2014 book.

 

1...474849...91Page 48 of 91
Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

Wayne Goddard -
  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
forged in fire knifemaking tv show

8 Things You May Not Know About “Forged in Fire”

how to forge damascus steel

How to Forge Damascus

James Huse ordered a custom sheath by No Surrender Holsters for his BBQ knife.

How to Create Damascus Patterns

Why Are Switchblades Illegal?

Advertisement
Advertisement
BladeMag.com
Facebook Instagram Pinterest X