Home Blog Page 171

Knife News Wire 12/21/17 – Knife Used to Free “Cocaine Smuggler”

0
Knife handle wooly mammoth
Santa Fe Stoneworks Damascus Woolly Mammoth Bone 3″ Button Lock Knife

Knife Used to Free “Cocaine Smuggler”

The United States Coast Guard is used to intercepting drug runners, but it wasn’t expecting a sea turtle shepherding cocaine bricks across the ocean.

All joking aside, this is yet another reason to keep a knife handy. You never know what you’ll come across. Good job, Guardsmen.

How to Bone Out Venison Shoulders

You’ll never appreciate a sharp knife as much as when you’re butchering. This video from sister pub, Deer & Deer Hunting, shows why with a tutorial on boning out venison shoulders.

Save the neck for me, Clark.

Trendy Knife Blocks

Knife blocks don’t get much attention in the world of knives, but designers are nonetheless pushing forward with new takes. Perhaps this is overdue, as this article in Business Insider points out:

When you think of a knife block, you may envision the traditional, slanted wood block that sits on your counter. There are many excellent blocks in this style, but none of them made our list. The main problems we have with the classic block is that it is difficult to clean and you can’t readily view the type of knife you are grabbing for. There are plenty of modern styles that sufficiently address these issues.

Check out some of the knife blocks catching eyes here.

Have a News Tip? Submit it Here

Have big news? Tell BLADE with this form.

    Check this box to prove you're not a bot

    Knife News Wire 12/20/17 – Running a Garage Op? Beware

    0

    City Shuts Down Knifemaking Operation in Garage

    The first phase of a knifemaking business likely starts in the garage. If that sounds familiar to you, keep in mind that fire safety isn’t the only concern, as one knifemaker in Maine found out. City ordinances can hit in a hurry once you cross the line from “it’s just a hobby” to “making several knives per week.”

    From the Sun Journal:

    …city officials shut him down. Neighbors had been complaining about the noise and smell and his Auburn neighborhood wasn’t zoned for blacksmithing.

    Read the full article here.

    Knives as Status Symbols in the UK

    Finally, a bright spot for knife enthusiasts in the United Kingdom. In a country saturated with imported knives, domestically made knives are becoming tokens of pride in certain pockets. This is especially the case with chefs and custom knives. 

    From Big Hospitality:

    Until just a few years ago, a British made knife was a rare sight in kitchens with German and Japanese-made blades favoured by most chefs.

    But a small group of artisans are starting to change that, enabled by a number of factors including an increased interest in British handmade products and the marketing power of the Internet and social media.

    See? Hipsters don’t always ruin everything. Read the full article here

    Flying for Christmas? Here’s How to Transport Your Knives

    Everyone’s favorite federal agency, the Transportation Security Agency, generally prohibits knives from being placed in a carry-on. Yes, there are stories of exceptions for this or that multitool, but it’s better to follow this guide from the TSA.

    Here’s the quick rundown:

    However, that chart goes only for knives you could stand losing. For transporting anything valuable (or, I suppose, invaluable), it may be better to ship it separately through a courier, such as FedEx or UPS. That way, you have a tracking code and know where your $75,000 work of art is hiding.

    Have a News Tip? Submit it Here

    Have big news? Tell BLADE with this form.

      Check this box to prove you're not a bot

      4 Knives That Demonstrate the Genius of Bill Moran

      0

      [wonderplugin_slider id=”4″]

       

      Bill Moran is one of the godfathers of modern knifemaking. Above are four knives that demonstrate his iconic style and show why he continues to inspire generations of knifemakers.

      Here is the master at work:

      Learn Knifemaking from a True Legend

      Bob Loveless is another legendary knifemaker. He wrote a guide to turning out knives like a pro, and BLADE‘s online store is one of the few places carrying it. Get your copy of How to Make Knives here from ShopBlade.com.

      Knife News Wire 12/19/17 – Apple Watch Designer Collects Rare Knives

      0

      Knife News

      Designer of Apple Watch Collects Rare Knives

      You’ve probably seen Marc Newson’s work before, but the knife world may not know him by name. He’s designed Apple Watches and airplanes, but knives are his true passion. If you missed this CNN profile, be sure to watch the video here.

      From the profile:

      “The thing that really fascinates me about knives is that they’re man-made … They’re probably the very first tool that we made, so it’s a little bit like the wheel in a way, it’s a monumental invention and evolution.”

      Read more.

      Guide to Visiting NYC: Leave Knives at Home

      Above the Law, a website covering the legal industry, recently published 5 Holiday Tips On How Not To Get Arrested In NYC. If you guessed that the loose definitions of “switchblades” would make an appearance, you guessed right.

      From the article:

      The size of the blade and how it opens could make carrying a knife criminal. If it’s a switchblade (opens by centrifugal force), it’s criminal. It doesn’t matter if you’re not using it, just carry it for work, or bought it legally. It’s still a crime.

      Let that “centrifugal force” comment sink in, and hope you’re not working in a trade that requires turning one piece of something into two. Read the full article here.

      Scouting Knives and School Safety

      School safety is an important issue, but what happens when disciplinary policies can’t forgive honest mistakes?

      Such is the case with a 13-year-old student in Massachusetts, who apparently didn’t intend to bring a Boy Scout knife to school. The district levied a suspension, although it denied that it has a zero tolerance policy for such items.

      From the Patriot Ledger:

      [The student’s parent] says the school overreached in its punishment of her son who never took the knife out of his backpack while in school and also objects to the classification of the scouting knife as a weapon.

      Read the full article here.

      Video: Using Balloons to Test Knife Sharpness

      What to do with those leftover birthday balloons? Here’s one idea. If you can cut the plastic ribbon that hangs down after you let the balloon float to the ceiling, you’ve got yourself a nice edge.

      Thanks to @bc_cutlery on Twitter for the demo.

      Video: Knife Used to Save Raccoon

      “Knives Save Lives” is a slogan you’ll hear often in stories about first responders, but what about raccoons?

      This video made the rounds on social media depicting just that. Here’s a hint for the next time this happens: There’s no reason it has to take that long to cut through tarp. Time for a bigger knife, dude.

      Have a News Tip? Submit it Here

      Have big news? Tell BLADE with this form.

        Check this box to prove you're not a bot

        Two Handle Materials to Watch: Richlite and Raffir

        0
        Knifemaking handle materials
        Synthetic materials from the Danish company known as Raffir include Raffir Fossil.

        Richlite and Raffir: Two Synthetic Materials on the Rise

        Synthetics continue to surge in light of the growing scarcity of some natural materials.
        According to Chris Hartman, a 37-year veteran in the family business at Masecraft, the buzz about two synthetic materials, Richlite and Raffir, continues to grow.

        “These product lines are totally different from each other, and they work like other materials that our customers already use, so the transition is easy,” he maintained.

         

        Raffir

        Synthetic knife handle materials
        A few examples of Raffir Fossil. (Image courtesy of Santa Fe Stoneworks)

        Distributed domestically by Santa Fe Stoneworks, Raffir is a resin-preserved material used in jewelry and other products also.

        “It works well in fine handles and accessories in which aesthetics are of great importance,” Chris advised. “There are several categories. The first, Raffir Fiber, is a composite material of neutral plant fibers cast in resin.

        “The second, Raffir Metapol, has aluminum fillers shining through a deep resin matrix. Raffir Noble is a composite material with fine brass and bronze-mesh layers encapsulated in a translucent epoxy resin. The last two categories, Raffir Fossil and Raffir Wood, are genuine rare fossils and fine-grained wood blocks that have been filled with a unifying and strengthening resin through a high pressure process that stabilizes the materials.”

        The finished Raffir fossil and wood materials maintain the original structures of the untreated substance while obtaining the mechanical advantages of the homogeneous resin compound.
        The Raffir materials are worked with the same tools that most knifemakers already own, therefore little or no additional investment is required.

        Richlite

        Types of knife handle materials
        An example of Richlite. (Mark Newman image)

        Richlite is a durable, versatile and sus-tainable material made from recycled, resin-infused paper and pulp derived from trees that have been harvested responsibly, Chris says.

        Complete with Forest Stewardship Council Certification by the Rainforest Alliance and GREENGUARD Certification, it is also antimicrobial, which is a benefit in food preparation.

        “Richlite is tough enough to build skateboards and skateboard parks, so it will take a beating and hold up to the elements,” he added. “Richlite is made in the USA and actually costs less than other like materials. It is similar to working with Micarta, G-10 or carbon fiber, and many of our customers are familiar with them. Customers appreciate that they are no longer inhaling carbon-fiber or fiberglass dust, which some of our customers just don’t like dealing with.”

        Other Synthetic Knife Handle Materials

        New composite laminates and hybrid materials are on the horizon, and their growth is steady.

        “Even though they are mass produced,” Chris said, “they can still be individually unique. They are stable and available in sizes that can easily be used in CNC cutting for production, or can still be cut and worked with standard tools and be handmade.”

        BLADE 2018 Knife Guide

        Download knife magazineRead more about hot knives, knifemaking and collecting in the BLADE 2018 Knife Guide. Download it here.

        New Knife: Case Star-Spangled Tribal Lock

        Case Tribal Lock folding knife

        tony bose knifemaker patriotic knifeAmerica. Apple pie. More America. More apple pie. (Hey, it’s the holidays, and pie is mandatory, right?)

        Wrap it all up with the new Case Star Spangled Tribal Lock in a patriotic-themed “natural bone” handle, and a Tru-Sharp surgical steel spear blade embellished with the iconic “USA.” The Star-Spangled Tribal Lock is the latest in the Case/Bose Tribal Lock family of knives designed by world-renowned knifemaker Tony Bose and is made in Bradford, Pennsylvania.

        With a manufacturer’s suggested retail price of $148.70, the one-blade folder weighs 3.3 ounces and is 4 1/8 inches closed—a good, solid weight and size for pocket carry. Oh, and in case any of you are wondering, Case’s Tru-Sharp surgical steel is the company’s version of 420HC stainless.

        Here’s an interview with Bose:

        Crazy About Case Knives?

        As the only full-color price guide devoted solely to Case pocket knives, Collecting Case Knives, 2nd. Ed. features nearly 1,000 photos, current values for hundreds of pocket knives from 1920 to today, and detailed information about methods for creating knives, quirks of the pattern numbering systems, tang stamps, types of blade steels, and knife shields.

        Click here to order your copy of Collecting Case Knives, 2nd. Ed.

        Knife News Wire 12/18/17 – How Much is a $75,000 Knife Worth?

        0

        Trench Cleaver and BLADE

        How Much is a $75,000 Knife Really Worth?

        Expensive custom knives
        Is this William Henry knife really worth $75,000?

        Does it need to be said this $75,000 pocketknife is a William Henry? Because it is. It’s so pricey, Forbes featured it here.

        Comments on social media asked how it’s possible to know the price of a knife before it’s sold. Who’s to say it isn’t $50,000? After all, it’s not like a $75,000 knife is mass-produced. It’s unique.

        Three things:

        • High-buck knives are usually commissioned before they’re made.
        • The market-rate for the materials and labor are easy to price out.
        • Something’s price is always what someone else is willing to pay for it. That someone else might not be you.

        Disruptive Model Emerges for Financing Knife Start-Ups

        Knifemaking start-ups face a tougher time securing financing because of backers’ leeriness toward “weapons.” Crowdfunding, where companies appeal directly to consumers for backing via pre-orders, is one way around this. Kickstarter is the best example of this approach.

        Bolstering this business model are affiliate programs that dole out a cut of pre-order sales. This is sometimes disguised as editorial on news sites. This sort of backdoor marketing offers a pay-as-you-go approach that is appealing to start-ups with limited advertising budgets.

        There’s nothing wrong with this approach. It’s just different, and worth considering if you’re starting a knifemaking business.

        Here’s an example from Business Insider.

        Quoting “Crocodile Dundee” Lands Restaurant in Lawsuit

        You know the line, but here’s the clip anyway:

        Best not repeat that line in formal marketing if you want to avoid legal trouble. Australian restaurant Grill’d allegedly used the famous utterance on its knife sleeves. From The Daily Telegraph:

        Hogan claims the “knife line” — as it’s referred to in the claim document — is valuable because it has been “heard by the many consumers in Australia who have seen the Crocodile Dundee movie” and “has been featured, mentioned or referred to on television, in print, on the internet, and in popular culture”. He claims Grill’d has used the line “without the licence of either of Rimfire or Mr Hogan”.

        Read the full story here.

        United Kingdom Sentencing More Minors for Knife Possession Crimes

        I’ll let this quote from The Guardian article do the talking. Read it carefully if you don’t get it at first.

        The number of 10- to 17-year-olds cautioned or sentenced for knife possession offences has risen by 16% since this time last year.

        Read the full article here.

        Video: The Knifemaker Supplying the World’s Greatest Chefs

        Business Insider profiled Chelsea Miller, a knifemaker cranking out blades for “name” chefs around the world.

        Have a News Tip? Submit it Here

        Have big news? Tell BLADE with this form.

          Check this box to prove you're not a bot

          Advertisement

          Must Read Articles

          Read this before you make a knife

          Knifemaking 101 – Read This Before You Make a Knife

            by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
          how to forge damascus steel

          How to Forge Damascus

          Advertisement
          Advertisement