Cutlery Hall-Of-Fame©

The world’s only shrine to the giants of the entire knife industry, the BLADE Magazine Cutlery Hall of Fame© is reserved for the best of the best. One inductee a year is honored at the BLADE Magazine Awards Banquet the Saturday night of the BLADE Show (tickets required.) Living Hall-Of-Fame members elect the inductee by a vote prior to the show.

A Look Back At BLADE Magazine Cutlery Hall of Fame® History

As these words are written, sitting members of the BLADE Magazine Cutlery Hall Of Fame® are making their nominations for who will be inducted into the Cutlery Hall Of Fame during BLADE Show 2019 on June 7-9 at the Cobb Galleria Centre in Atlanta. When you read these words those nominations will have been completed and the final balloting will be under way.

The entire process rekindles fond memories for this writer, most of which involve the Hall Of Fame ceremony itself that annually occurs during the BLADE Magazine Awards Reception the Saturday night of the BLADE Show.

Cutlery Hall of Fame
Bob Terzuola (left) presents Sal Glesser (right) with his BLADE Magazine Cutlery Hall-Of-Fame® plaque during the Hall-Of-Fame ceremonies 20 years ago at the 1999 BLADE Show.

The first such ceremony that stood out for me was in 1988 when A.G. Russell and Ken Warner inducted each other—with neither knowing at the time the other would be inducted as well! When each inducted the other the expression on the new inductee’s face was priceless, and that ceremony remains like no other before or since.

Hubert Lawell’s induction in 1989 was memorable for his bringing a copy of the old and now defunct EDGES pocketknife newspaper we used to publish up on the stage, holding it high in the air, and praising it and everything it/we did as the greatest thing for the knife industry since sliced bread. Never mind that many in the audience appeared unsure of what Hubert was saying in his low Tennessee drawl, at the end of his speech he had everyone on their feet cheering—though I’m not sure all of them were cheering because of what he said so much as he was finished saying it.

The 1993 inductions of Col. Rex Applegate, B.R. Hughes and Bruce Voyles were unique. They were the only inductions ever held outside the BLADE Show venue, specifically under a big canvas tent at Stone Mountain Park near Atlanta. Bruce became the first-ever member inducted by acclimation of the membership, which was a pleasant surprise to him. Not to be outdone, upon his induction B.R. uttered perhaps the best acceptance line ever.

“I don’t know that I deserve this Hall-Of-Fame plaque,” he deadpanned, “but I’m not giving it back!”

Following it all everyone retired to a giant fireworks presentation courtesy of the park.
Spyderco CEO Sal Glesser’s induction in 1999 was particularly memorable. Not only were we able to keep Sal from knowing until the last minute that he would be inducted, but Mrs. Gail Glesser was able to keep secret from him that she would be there, too.

best knifemakers in the world
Al Buck, M.H. Cole, Bill Williamson and Jimmy Lile receive their Hall of Fame awards from James F. Parker at the BLADE Show banquet.

Gail was supposed to miss the BLADE Show entirely that year due to a scheduling conflict. However, when we told her Sal was going to be inducted, unbeknownst to him she begged off on her other engagement and arranged to arrive at the show just before the ceremony began. So not only was Sal surprised to be inducted, he was equally tickled to have his wife there to share in the honor with him.

In recent years we’ve had to forego all the cloak-and-dagger stuff involving keeping the inductions secret because we have been announcing the inductions on our website well before the show, which we will do again for this year’s inductions sometime next month. Stay tuned to blademag.com for that announcement.

Meanwhile, visit the list and mini-bios of all our illustrious Cutlery Hall-Of-Fame members. While all of their induction ceremonies are not recounted here, each was special in its own way just the same.

BLADE Show tickets online

Delavan and Lobred Join Cutlery Hall Of Fame®

Dan Delavan and Phil Lobred, two long-time supporters of the knife industry, are the latest inductees into the BLADE Magazine Cutlery Hall Of Fame®.

The formal inductions will be held during the BLADE® Magazine Awards Reception the Saturday night of the BLADE Show, which will be held June 1-3 at the Cobb Galleria Centre in Atlanta.

The Cutlery Hall Of Fame is the only such body to recognize all members of the knife community. Nominated and voted on by living Cutlery Hall Of Famers, the inductees must have a) demonstrated extraordinary service to the knife industry; b) displayed honesty, character and integrity; c) advanced the industry by the creativity and originality of their works or contributions; d) as ambassadors or outstanding contributors furthered the positive impact of the knife industry on the world at large; and e) in summary, demonstrated a worthiness to be a member of such a prestigious group.

Dan Delavan

Dan Delavan
Dan Delavan

Along with his wife Pam, Dan closed the Plaza Cutlery retail knife shop in the South Coast Plaza Shopping Resort in Costa Mesa, California in January after 44 years as one of the world’s most forward thinking of brick-and-mortar cutlery stores. Dan was in on the ground floor, helping his parents, Del and Lois, open the store in 1974.

From the outset, Plaza was a pioneer in selling knives in a mall setting and custom knives in general—the latter at Dan’s insistence and something only a handful of stores at most did at the time. Plaza was a leader in hands-on customer service; sharpening while you waited; in-store meet-the-knifemaker events; custom and factory knife exclusives; the latest factory knives, swords, kitchen knives and assorted knife accessories; and later and through to today, online knife sales, including Randall knives and customs.

The Delavans started what would become the California Custom Knife Show in the early 1980s and made it into one of the industry’s premier cutlery events, including a visit from Sylvester Stallone that helped pave the way for the Rambo knife revolution that transformed the knife culture in general. Dan and Pam sold that show and started another one that was very successful. They recently sold the latter and it will continue under new management.

Dan also helped start the National Independent Cutlery Association, a buying group for domestic cutlery shops that boasted 100 member stores at its height. NICA helped its members in their business relationships with knife manufacturers and importers, had an annual knife and knife exclusives, and otherwise aided in furthering the availability of fine cutlery to its members’ customers nationwide.

Dan Delavan Plaza Cutlery
An image from 1975 of Dan Delavan in the old Plaza Cutlery knife store one year after it opened.

Phil Lobred

Phil Lobred
Phil Lobred

Phil may be best remembered for commissioning what is arguably the most important knife of the modern custom era: the King Tut Dagger Reproduction by fellow Hall-Of-Famer Buster Warenski.

Beginning in 1983 Phil coordinated the annual Art Knife Invitational, an intimate gathering of the world’s elite knifemakers in San Diego, who in turn offered their knives for sale to the world’s elite custom knife collectors. The show took about a 10-year hiatus but returned as a biennial event and continued to draw the elites worldwide. It continues under the direction of Phil’s daughter, Sandee.

For a time in the 1970s Phil shared his home with Hall-Of-Famer Gil Hibben. Hibben made knives in Phil’s garage, with Phil by his side. Later, with Phil in tow, Gil enjoyed an audience with a special fan of Hibben knives: Elvis Presley. Phil and Gil visited with Elvis until the wee hours, a meeting that remains the stuff of legend.

Phil’s vast knowledge of custom knives and also 19th-century dress bowies proved an invaluable source of information for many, including BLADE. Perhaps Phil’s most important contribution was his faithful patronage and support of the custom knife industry. He bought and collected the knives of many makers from the early 1970s on at a time when the industry needed such buyers/collectors desperately to survive. As a Hall-Of-Fame nominator noted, “Phil was the definition of a knife collector, always talking and promoting knives. Then he started his Art Knife Invitational and that changed the custom knife industry forever.”

King Tut dagger
The King Tut dagger repro Lobred commissioned Buster Warenski to create.

De Asis, Batson Join Cutlery Hall

Watson into BLADE Magazine Cutlery Hall Of Fame
Jim Batson and a young bladesmithing student take a break at a past Batson Bladesmithing Symposium.

Les de Asis and Jim Batson are the newest members of the BLADE Magazine Cutlery Hall Of Fame©.

Both will be formally inducted into the Cutlery Hall Of Fame the Saturday night, June 3, of the BLADE Show at the Cobb Galleria Centre in Atlanta during the BLADE Magazine Awards Reception (tickets required). The BLADE Show will be June 2-4.

According to a fellow Cutlery Hall Of Famer, de Asis has been a major pillar in the knife industry for more than 35 years. He founded Bali-Song, Inc., which later became Benchmade Knife Co. From a fledgling business in a garage to a major force in the cutlery industry, Benchmade is among the top knife manufacturers in the world. Les was a major influence in the renaissance of the butterfly genre of knives, which continues to enjoy a large following of knife fans. He was a founder of the American Knife & Tool Institute (AKTI), one of the earliest and most successful of the organizations protecting the rights of knife enthusiasts and the knife industry, and remains a driving force in the organization. He raised the bar significantly on the quality and function of automatic knives for military, law enforcement, first responders and general use, and Benchmade remains a leading manufacturer of autos today. The AXIS™ Lock designed by William McHenry and Jason Williams and introduced into production by Les helped maintain the revolution in locks for folding knives that persists today.

BLADE Magazine Cutlery Hall Of Fame welcomes Les de Asis.
Les de Asis—here with Roberta de Asis—has been inducted into the BLADE Magazine Cutlery Hall Of Fame©.

James L. “Jim” Batson is one of the world’s most noted bladesmiths and authorities on both bladesmithing and Cutlery Hall-Of-Famer James Bowie and bowie knives. The Batson Bladesmithing Symposium near Bessemer, Alabama, is one of the world’s most respected and best attended annual hammer-ins, attracting bladesmiths, knifemakers and knife enthusiasts from around the world, and has been doing so for almost 30 years now. Through his symposium and his many nationwide seminars teaching the art of bladesmithing, Batson is a standard bearer of the American Bladesmith Society’s stated goal of educating any and all on how to best make knives of forged steel. He has scoured the countryside in Texas, Arkansas and the Southeast, and combed through the archives of dozens of libraries and city and town halls in search of information on bowie knives and the life and times of James Bowie. He also has written extensively on both subjects.

Batson is an award-winning master smith in the American Bladesmith Society (ABS) and two-time ABS chairman. He led the ABS through some of its most successful times in recent years and shows no signs of slowing down. In the February 2014 BLADE®, he was ranked No. 9 among the top 13 knifemakers from 1989-2000. “Jim is a great bladesmith, a great leader, a great historian, a great bowie authority, a great writer and a retired rocket scientist,” wrote one Cutlery Hall Of Famer. “I challenge anyone to match that record!”

Cutlery Hall Of Fame: Buster Warenski

Any discussion of the greatest custom knifemakers of the modern era must include the late Buster Warenski, a member of the BLADE Magazine Cutlery Hall-Of-Fame.

While best known for his reproduction of the King Tut Dagger in the late 1980s, Warenski’s influence on custom knives, knifemakers and the Knifemakers’ Guild was immense and, in many ways, continues to this day. One of the early Guild voting members, he was considered among the best custom makers from the get-go. He excelled not only by the example of his workmanship but also by his leadership, serving on the Guild’s board of directors for a number of terms, including as president (1977-79).

No mention of the greatest knifemakers is complete without mention of Buster Warenski. (SharpByCoop.com photo)
A member of the BLADE Magazine Cutlery Hall Of Fame, Buster Warenski was one of the greatest knifemakers ever. (SharpByCoop.com photo)

The workmanship of his knives pretty much spoke for itself. He could make just about any fixed blade, folder or sword, and make it extremely well, though it is his art daggers for which he is most remembered. He taught himself how to engrave and although he may not have been the best engraver, the early examples of his engraving held up among other knives of the time.

But then it always seemed that Buster found a way to make his knives the best—and one way was marrying Julie, who learned how to engrave and became one of the best, lending her talents to Buster’s knives and making them even more fabulous. (Julie Warenski-Erickson continues to engrave today and is married to knifemaker Curt Erickson.)

Perhaps the greatest tribute to any knifemaker is one from one of his peers who also happens to be one of the world’s best makers—in this instance, Steve Johnson. As Steve noted, “Putting myself in even the same sentence as a ‘fellow knifemaker’ with Buster makes me uncomfortable. No one will ever attain the skill and ability as a knifemaker as this great man did.”

For the latest knives, knife news and much more, stay tuned to www.blademag.com.

 

Guild Show: Granddaddy Custom Knife Event

Great custom knives always highlight the Guild Show.
Alan Snow (right) holds the Stealth III made by Kevin Hoffman (left) at a past Guild Show.

The Knifemakers’ Guild Show will hold its 44th annual rendition—the granddaddy of all custom knife shows—this weekend at the Seelbach Hilton Hotel in Louisville, Kentucky. Knifemakers, knifemaking suppliers, purveyors and more from all over the world will convene in Derby Town, where some of the best custom knives will be shown and sold.

The Guild got its start in February 1970 when the Guild’s “founding father,” BLADE Magazine Cutlery Hall-Of-Fame© member A.G. Russell, rented tables at the Sahara Gun Show in Las Vegas and invited several knifemakers to display knives there. Later that year, 11 makers met in Tulsa, Oklahoma, to form the Guild. The makers were John Applebaugh, Cutlery Hall-Of-Famer Blackie Collins, John Nelson Cooper, Cutlery Hall-Of-Famer Dan Dennehy, Ted Dowell, Chubby Hueske, John Kirk, Cutlery Hall-Of-Famer Bob Loveless, John Owens, Jim Pugh and G.W. Stone. Loveless was elected secretary—the Guild office title today is president—and A.G. Russell was made honorary president.

The purposes of the Guild are to:

1) Promote custom knives and knifemakers

2) Assist the knifemaker technically;

3) Encourage ethical and professional business conduct;

4) Sponsor an annual business meeting and knife show.

The show has been held in assorted venues over the years, including Kansas City, Dallas, Orlando, New Orleans, Las Vegas and now Louisville. Some of the earliest Kansas City shows were held at the old Muehlebach Hotel, where, in addition to Loveless and Dennehy, such Guild legends as Cutlery Hall-Of-Famers Buster Warenski, Bill Moran, Ron Lake, George Herron, D’ Holder, Frank Centofante, Gil Hibben and many others displayed their knives and kick-started an organization that continues to be recognized worldwide today. Hibben, in fact, remains active in the Guild today, and is in his seventh and final year as Guild president. He will step down this year.

Make plans now to attend the show this weekend. There will be a special President’s Gala Thursday, Sept. 19, at the Seelbach, and should be a great place to see Gil and Linda Hibben in their final show as the Guild’s first family, as well as all the other makers and their great knives show Friday, Saturday and Sunday.

For the latest in knives and knife news, keep it here at www.blademag.com.

BLADE Show Names Top Knives

BLADECOLLECTORFULLGet a free digital issue of BLADE when you enter your e-mail in the box below. You’ll also be signed up to receive e-newsletters full of knife news, tips and features from BLADE and partners.

[form id=”25071″]


The Blade Magazine 2013 Best Buy Of The Year is the CRKT Endorser, named during the 2013 BLADE Show. (CRKT photo)
The CRKT Endorser took home the BLADE Magazine 2013 Best Buy Of The Year Award at the 2013 BLADE Show. (CRKT photo).

The world’s top knives were recognized during the BLADE Show & Living Ready Expo (www.bladeshow.com) May 31-June 2 at the Cobb Galleria Centre in Atlanta.

The leading factory knives were honored with the BLADE Magazine 2013 Knife-Of-The-Year® Awards, while the world’s pre-eminent custom knives were named in the show’s custom knife judging competition.

All entrants in the Knife-Of-The-Year and custom knife judging competitions were rated on a number of factors, including utility, design, creativity, materials, aesthetics, feel and other traits.

Announced Saturday night at the BLADE Magazine Awards Banquet in the Cobb Galleria, honors in 13 different Knife-Of-The-Year categories included 10 knives and one knife accessory. Two awards also went to individuals for special achievement in the knife industry. The categories and winners:

•Overall Knife Of The Year®: Zero Tolerance 0454;

•American-Made Knife Of The Year®: Hogue Elishewitz EX-04;

•Imported Knife Of The Year®: Fox Knives Modras;

•Most Innovative American Design: Microtech D.O.C. Kill Switch;

•Most Innovative Imported Design: CRKT Ken Onion Swindle;

•Best Buy Of The Year: CRKT Endorser;

•Kitchen Knife Of The Year®: Ken Onion Chef Works;

•Investor/Collector Knife Of The Year®: Pro-Tech Newport;

•Knife Collaboration Of The Year®: Microtech Mick Strider;

•Manufacturing Quality Award: Chris Reeve Knives;

•Accessory Of The Year: CRKT Onion Survival Para-saw;

•Industry Achievement Award: American Bladesmith Society (ABS) master smith Joe Keeslar for introducing  the ABS and modern bladesmithing to France through annual workshops, as well as teaching bladesmithing in the USA via seminars and his books, for his award-winning knives, and for his leadership via several terms on the ABS Board Of Directors and as chairman of the ABS; and, finally:

•Publisher’s Award: Joyce Laituri, marketing manager of Spyderco, for almost two decades of setting the standard for how to best promote and publicize a knife company’s knives—in this case, those of Spyderco. Her ability to work with the media in terms of providing Spyderco knives, knife imagery, knife information and other materials has been a model for all others in public relations to emulate. No one has done it better.

BLADE Show: Who’ll Be the 50th Hall-Of-Fame Inductee?

Who will be the 50th inductee into the BLADE Magazine (www.blademag.com) Cutlery Hall Of Fame at this week’s BLADE Show & Living Ready Expo (www.bladeshow.com)? Find out when the world’s biggest and most important knife show begins Thursday, May 31, and runs through Sunday, June 2, at the Cobb Galleria Centre in Atlanta.

While there, check out the latest in the finest custom and factory knives, the greatest knifemakers and knife companies, the legends of the industry, the most comprehensive seminar slate of any knife event, and much more.

Last year knifemaker Harold “Kit” Carson was a most popular 49th inductee into the Cutlery Hall Of Fame, and a who’s who of the knife industry attended the BLADE Magazine Awards Banquet the Saturday night of the show to celebrate the occasion. The 50th inductee will be announced at the BLADE Magazine Awards Banquet show Saturday night this year, too (tickets required).

The induction process began in February when living members of the Cutlery Hall Of Fame were contacted to submit a maximum of two nominations each for this year’s induction. Once those nomination submissions were made, a final ballot was compiled for the members to vote for their choices. Each member could vote for up to two nominees, with their first choice receiving two points and their second choice one point. The person with the most points is this year’s inductee.

Who will it be? Attend the BLADE Show & Living Ready Expo to find out. The inductee’s name will be included in a special news release that also will announce the BLADE Magazine Knife-Of-The-Year® awards and will be sent out via electronic media after Saturday night’s banquet.

The 2013 BLADE Show will announce the 50th inductee into the BLADE Magazine Cutlery Hall Of Fame. (Mike Carter photo)
The 50th inductee into the BLADE Magazine Cutlery Hall Of Fame© will join fellow inductees such as Gil Hibben (above) in the Hall during the BLADE Show & Living Ready Expo this week. (Mike Carter photo)
Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement