BLADE Show

Hosted in Atlanta, Georgia in May or June every year, the BLADE Show truly is the World’s Largest Knife Show. It features the most diverse array of knives from manufacturers, knifemakers, collectors, dealers and purveyors, all under one roof. The BLADE Show plays host to the Blade Magazine Knife-Of-The-Year® Awards, the Blade Magazine Cutlery Hall of Fame© induction ceremony, seminars, demonstrations and much more.

Visit BladeShow.com for tickets, travel information, exhibitor registration and sponsorship opportunities.

2025 BLADE Show Preview: A Truly International Knife Affair

0

Only at the BLADE Show do the continents come together so well.

With the possible exception of Antarctica and a stray archipelago or two, knife fans and knifemakers from every continent and beyond will come together as one for the 44th Annual BLADE Show.

Sponsored by Smoky Mountain Knife Works, the BLADE Show June 6-8 in Atlanta’s Cobb Galleria Centre is where more knives—custom, factory, antique, classic collectibles, etc.—are exhibited, played with, bought and sold than at any other knife event. Nine-hundred-fifty exhibitors from 35 countries will showcase their newest, coolest knives and examples of most every edged tool extant, accessories, knifemaking supplies and equipment, and more. Knife purveyors, pro-knife legislation entities, knifemaking teachers and other cutlery outfits too numerous to mention will display their wares as the world knife community undertakes the yearly pilgrimage to Georgia.


WHAT: BLADE Show
WHERE: Cobb Galleria Centre, Atlanta
WHEN: June 6-8
DAYS and TIMES:
Friday, 11 a.m.-6 p.m. (early bird ticket holders can enter at 10 a.m.)
Saturday, 9 a.m.-6 p.m.
Sunday, 9 a.m.-2 p.m.

Get Your 2025 BLADE Show Tickets Now!


Factory knife debuts, the educational knife instruction of BLADE University, and informative, entertaining and action-packed demos are among the sharp goodies awaiting show patrons. The BLADE Magazine 2025 Knife-Of-The-Year® Awards and the custom knife judging competition are others. The American Bladesmith Society (ABS) will name its latest master and journeyman smiths, and some of the best knives the ABS and The Knifemakers’ Guild and unaffiliated makers offer will be on display in all their sharpest glory.

And don’t forget The Pit, the after-hours meeting place in and around the sunken bar of the host hotel, the Renaissance Atlanta Waverly, where show patrons and exhibitors will party into the wee hours beginning the night before the show through the end of the weekend to compare knives, swap lies and otherwise celebrate the year’s most momentous cutlery weekend.

Liong Mah Knives will debut the Warrior 3 framelock folder in a 3.5-inch hand-ground traditional tanto blade of Bohler M390 stainless steel. Handle: titanium. Country of origin: China. MSRP: $420.
Liong Mah Knives will debut the Warrior 3 framelock folder in a 3.5-inch hand-ground traditional tanto blade of Bohler M390 stainless steel. Handle: titanium. Country of origin: China. MSRP: $420.

Among the outstanding makers from a potpourri of countries who will be exhibiting:

  • Argentina
  • CAS Brothers
  • Mauricio Daletzky
  • Javier Vogt
  • Australia
  • Bruce Barnett
  • Belgium
  • Jean-Louis Regel
  • Veronique Laurent
  • Samuel Lurquin
  • Brazil
  • Franco de Souza
  • Rodrigo Sfreddo
  • Fabio Barros
  • Gus Cecchini
  • Denmark
  • Jens Anso
  • China
  • WE Knife
  • Reate
  • Ketuo
  • Italy
  • Lionsteel
  • Alfredo Faccipieri
  • Fox Cutlery
  • Maniago Knife Makers (MKM)
  • Maserin
  • Japan
  • Kiku Matsuda
  • Koji Hara
  • Norway
  • Helle Knives
  • Portugal
  • Carlos Queiros
  • Russia
  • Sergey Shirogorov
  • South Africa
  • Bertie Rietveld
  • Theuns Prinsloo
  • Henning Wilkinson
  • Neels van den Berg
  • Sweden
  • Damasteel
  • Michael Andersson
  • United Kingdom
  • Grace Horne

Some of the leading American exhibiting makers will be BLADE Magazine Cutlery Hall-Of-Fame® members Bill Ruple and Steve Schwarzer; ABS master smiths Harvey Dean, Mike Quesenberry, Shane Taylor, David Lisch, Jordan LaMothe, Josh and Karis Fisher, and Andrew Meers; slipjoint makers Stanley Buzek, Tom Ploppert, Luke Swenson and Tim Robertson; Allen Elishewitz; Les George; Walter Brend; Murray Carter; Strider Knives; Hawk Knives; Vince Evans; Vladimir Kolenko; Owen Wood, a transplanted South African who now calls Texas home; factory companies Spyderco, Case, TOPS Knives, Chris Reeve Knives, Spartan Blades, Pro-Tech, Microtech, Kershaw, Squid Industries, KA-BAR and Heretic Knives; and many more.

Knives Of The Year Revamp

The BLADE Magazine Awards Reception (page 61) will be the Saturday night of the show on the second floor of the Renaissance Atlanta Waverly Hotel at the top of the escalators above The Pit. ABS master smith Harvey Dean (right) accepts his award for Best Fixed Blade at last year’s reception.
The BLADE Magazine Awards Reception (page 61) will be the Saturday night of the show on the second floor of the Renaissance Atlanta Waverly Hotel at the top of the escalators above The Pit. ABS master smith Harvey Dean (right) accepts his award for Best Fixed Blade at last year’s reception.

The BLADE Magazine Knife-Of-The-Year® Awards are the factory knife industry’s premier honors. In its ongoing effort to maintain the awards’ preeminent position in the knife industry, the BLADE Show is changing the way the winners are determined. Instead of being exhibited in the BLADE Show lobby display case for judging, this year the knives will be judged in a private room. In this way, BLADE Show officials believe, it will be much easier for the judges to fully examine the knives minus the hustle and bustle of onlookers and passersby that engulfed the display case area in past years.

In another change, a new category, Best Of The Rest, has been added to address entries that do not fit any of the existing award categories. Moreover, the Automatic Knife Of The Year sponsored by PVK.com that debuted last year returns.

As in the past, the entries are limited to BLADE Show factory booth exhibitors, all of whom received the rules well before the show outlining the new changes. Like last year, the winners will be announced and presented during the BLADE Magazine Awards Reception Saturday at 8 p.m. in the room on the floor above The Pit. The winners will be listed on BLADE’s blademag.com after the awards reception, and a list will be posted outside the show entrance Sunday morning.

Knife-Of-The-Year® Awards Categories:

  • Overall Knife of the Year
  • Most Innovative American-Made Knife of the Year
  • American-Made Fixed Blade of the Year
  • Most Innovative Imported Knife of the Year
  • Imported Fixed Blade of the Year
  • Best Buy of the Year
  • American-Made Folder of the Year
  • Investor/Collector of the Year
  • Imported Folder of the Year
  • Manufacturing Quality Award
  • Automatic of the Year
  • Accessory of the Year
  • Kitchen Knife of the Year
  • Collaboration of the Year
  • Best of the Rest Award

BLADE University

BLADE University classes will run the Thursday before the show through show Saturday. Neels van den Berg—here giving a class on quillon daggers at last year’s show—will conduct the class “Level Up Using Lasers, Ninjas and Other Cool Tools.” For the full BLADE U.
BLADE University classes will run the Thursday before the show through show Saturday. Neels van den Berg—here giving a class on quillon daggers at last year’s show—will conduct the class “Level Up Using Lasers, Ninjas and Other Cool Tools.” For the full BLADE U.

Get current on the latest knifemaking techniques and other trending sharp subjects during the 12th Annual BLADE University on Thursday, Friday and Saturday.

Sponsored by Work Sharp, BLADE University has the most extensive schedule of knife, knifemaking and other instruction held at any knife show.

Thursday, June 5

  • Material Conservation for the Forging Smith, 4-5 p.m., Room 104. Award-winning bladesmith Mareko Maumasi shares techniques and approaches he uses to reduce guesswork and material waste in the workshop.

Friday, June 6

  • Material Conservation for the Forging Smith, 4-5 p.m., Room 104. Award-winning bladesmith Mareko Maumasi shares techniques and approaches he uses to reduce guesswork and material waste in the workshop. FRIDAY, JUNE 6
  • Fundamentals of Grinding, AmeriBrade and guest grinders, 8 to 9:30 a.m., The Courtyard. AmeriBrade and guest makers provide a general overview on grinds, techniques and different equipment.
  • Deep Dive into Culinary Knives, 10 to 11:30 a.m., Room 103. Mareko Maumasi returns to help collectors and makers better understand the nuances of high-performance culinary knives.
  • Brakimo: Forged for the Field, Room 107. Nick Italiano, Recoil OffGrid associate editor and host of the Raise The Flag Podcast, interviews knife designer Joe Flowers on the untold story of how the TOPS Knives Brakimo knife was crafted for survival and other uses.
  • Take Damascus Etching to the Next Level, 1:30 to 2:30 p.m., Room 103. Baker Forge & Tool’s Greyson Weltyk of Grey Blades and Jordon Berthelot of JB Blades teach step-by-step processes on how to use Gator Piss etchant to enhance intricate patterns in damascus, including in-person demos with damascus knives.
  • How To Steal Designs (But Not from Other Knifemakers) and Make Them Your Own, 2 to 3 p.m., Room 113. Drawing inspiration from such sources as Byzantine-era cathedrals, Art Deco and Art Nouveau and others, Jason Knight shows you how to take your knife idea and make it uniquely yours without copying anyone else’s work.
  • Hands on Sharpening, 3:30-4:30 p.m., Room 113. Bring your knife or a borrowed one and learn the progression of shaping a bevel, sharpening and edge maintenance from the team at Work Sharp.
  • Leather Sheath Making Tips, Tricks & Tools, 4:30 to 5:30 p.m., Room 107. John Dennehy shares the sheath-making tips he’s learned after working leather for almost 50 years, including leather selection, the tools he uses and why he uses them.

Saturday, June 7

  • Elevating Your Handle Appearance: Spine Filework, Handle Shapes and Pin Placement, 8:30-9:30 a.m., Room 113. Knifemaker Kyle Daily shares how to embellish your knife with distinctive features that go far beyond standard production models.
  • Demystifying Damascus, Mareko Maumasi, 9:30 to 11 a.m., Room 104. Mareko Maumasi helps collectors gain a better appreciation for the skill required to make damascus patterns and deepens the makers’ understanding of pattern design and composition.
  • The Cutting Edge, Nick Italiano, 9:45 to 10:45 a.m., Room 107. Nick Italiano returns to discuss the nuances of various blade grinds. From common everyday uses to survival situations, Nick covers several common grinds and their real-world function.
  • Level Up Using Lasers, Ninjas and Other Cool Tools, 12:30 to 1:30 p.m., Room 113. Join Neels van den Berg and dive into how laser engravers, digital design, and jigs and process design can streamline your workflow and improve your work. Plus, explore the mindset and discipline—the “ninja skills”—that separate good makers from great ones.
  • Designing Knives: Philosophy, Tools and Inspiration, 2:15 to 3:15 p.m., Room 104. Jens Anso shares his approach to knife design, including how he thinks about form and function, the tools he uses and where he finds inspiration.
  • You Can’t Make Knives! 2:30-3:30 p.m., Room 107. Jason Knight returns to explain why he ignored the warnings and made knives anyway—and how you can survive, flourish and establish yourself as a timeless, classic knifemaker.
  • How to Select the Best Steel for Every Knife, 4 to 5 p.m., Room 104. Steel metallurgist Dr. Larrin Thomas covers which steels are more optimal for a large chopper, kitchen knife, folder and more, covering cost, edge retention, forgeability, grindability and other factors.

*Work Sharp sponsors BLADE University.

Enroll In BLADE University Now And Sharpen Up Your Knife Knowledge!

Custom Knife Awards

The judges will have their hands full during the custom knife judging competition.
The judges will have their hands full during the custom knife judging competition.

Leading industry authorities will pick the best custom knives by BLADE Show exhibitors in the annual knife judging competition, with the winners announced during the BLADE Magazine Awards Reception Saturday at 8 p.m.

The categories are:

  • Hugh Bartrug Best Of Show
  • Best Fixed Blade
  • Best Damascus
  • Best Kitchen Knife
  • Best Miniature
  • Best Art Knife
  • Best Fighter
  • Best Bowie
  • Best Handle Design
  • Best Tactical Folder
  • Best M.A.C.K. (Machine Assisted Custom Knife)
  • Best Utility Hunter
  • Best Folder
  • Most Innovative Design
  • Best Knife Collaboration
  • Best Sword
  • Best New Maker
  • Best Of The Rest

The competition is open to the show’s custom knife exhibitors only. The winners will be announced on BLADE’s blademag.com website after the awards ceremony, and a list will be posted outside the show entrance Sunday morning.

World Championship Cutting Competition

The BLADE Show World Championship Cutting Competition will be conducted by BladeSports International (BSI) and held in The Courtyard, the parking lot of the host hotel, the Renaissance Atlanta Waverly, Saturday at 4:30 p.m. Attendance is free to BLADE Show ticketholders.

Returning to defend their titles in the men’s and women’s divisions are the first-ever same-year husband-and-wife champs: Mr. and Mrs. James and Michael Clifton. While the BSI Nationals (April 26) were still to be held at press time, 16 men and 14 women had qualified for the BLADE Show World Championship.

Men’s Qualifiers

  • David Moore
  • James Clifton
  • Ben Propst
  • Anthony Stovall
  • Mike Eubanks
  • Gary Bond
  • Eldon Johnson
  • Daniel O’Connor
  • Hunter Eubanks
  • David Barnes
  • Chris Berry
  • Ben Leyder
  • Donavon Phillips
  • Jayson Pilosi
  • Daniel Thompson
  • Aaron Tarone

Women’s Qualifiers

  • Jo Carothers
  • Sara Maly
  • Terri Lynn
  • Kenda Speaks
  • Sue Ann Propst
  • Michael Clifton
  • Robin Berry
  • Juli Coon
  • Lindsay Zehrung
  • Rhiannon Sibley
  • Lauren Kalns
  • Cindy Pilosi
  • Katie Adams
  • Jamie Doung

Bali Grand Master

Top balisong flippers will vie for the title of “Grand Master” in the 9th Annual Battle for Bali Champion sponsored and conducted by Blade HQ.

BLADE Show ticketholders are invited to watch the competition on the floor above The Pit of the Renaissance Atlanta Waverly Hotel on show Saturday from noon to 2 p.m. Competitors will start flipping knives at 12:30 p.m.

The top three finishers will receive prizes and all participants will get swag bags. Steven Ash was crowned Bali-Champion last year, with Corbin Lovins finishing runner-up for the second year in a row and Seiji Brown third.

Cutlery Hall-Of-Fame

The BLADE Magazine Cutlery Hall-of-Fame® inductions (page 61) will be the Saturday morning of the show. William “Bill” Harsey, Jr., was inducted by his friends at last year’s ceremony. From left: U.S. Army Special Forces (retired) Col. Joseph Osborne; Tim and Anne Reeve (holding Bill’s Hall-of-Fame plaque) of Chris Reeve Knives; Mark Carey, Spartan Blades; Dean Felides of Old Yankee Cutting Boards; and Curtis Iovito, Spartan Blades.
The BLADE Magazine Cutlery Hall-of-Fame® inductions (page 61) will be the Saturday morning of the show. William “Bill” Harsey, Jr., was inducted by his friends at last year’s ceremony. From left: U.S. Army Special Forces (retired) Col. Joseph Osborne; Tim and Anne Reeve (holding Bill’s Hall-of-Fame plaque) of Chris Reeve Knives; Mark Carey, Spartan Blades; Dean Felides of Old Yankee Cutting Boards; and Curtis Iovito, Spartan Blades.

The BLADE Magazine Cutlery Hall Of Fame® will formally induct its new members at 8 a.m. show Saturday in the Kennesaw Room of the Renaissance Atlanta Waverly Hotel. Tickets are required ahead of time for the ceremony, which includes a breakfast. Seating is limited. For ticket information, email [email protected].

Hall of Fame inductees includes:

  • Harvey Dean
  • Rick Dunkerley
  • Stanley Fujisaka
  • Dr. James R. Lucie
  • Alfred Pendray
  • James Schmidt
  • Daniel Winkler
  • Karen Shook

Classroom Seminars

Classroom seminars are held inside the Cobb Galleria. Admission is free to BLADE Show ticketholders:

The History, Mystery, and Meaning of Emerson Knives: Emerson Knives has always been more than just a knife company. Don’t miss this opportunity to spend an hour with Ernest Emerson as he pulls back the veil to give you the history and the reasons Emerson Knives has come to represent more than just knives. You’ll also get a chance to ask questions about all things Emerson from Ernest himself.

The Unadulterated Story of Knifemaking: High-Endurance Performance Knife master smith/BLADE® field editor Ed Fowler will examine what made the great makers great. They could have gone into other occupations—why didn’t they? Are today’s knife goals different than they were then? What are the ways to price your knives? What can makers do to gain their markets? Ed will examine the topics as only he can.

Saturday

  • 8 a.m.: BLADE Magazine Cutlery-Hall-Of-Fame Inductions, Kennesaw Room, Renaissance Atlanta Waverly Hotel (tickets required in advance; contact [email protected])
  • 11:30 a.m. to 12:30 p.m.: The Unadulterated Story of Knifemaking, High-Performance Endurance Knife master smith/BLADE® field editor Ed Fowler, Room 107
  • Noon to 2 p.m.: 9th Annual Battle for Bali-Champion, conducted by Blade HQ, on the second floor at the top of the escalators of the Renaissance Atlanta Waverly Hotel (flipping starts at 12:30)
  • Noon to 3 p.m.: Buck Collectors Club, Room 103
  • 12:30 to 1:30 p.m.: The History, Mystery, and Meaning of Emerson Knives, Ernest Emerson, Emerson Knives, Inc., Room 104
  • 4:30 p.m.: BLADE Show World Championship Cutting Competitions, conducted by BladeSports International in The Courtyard

Knife For A Novel

Author Tom Marshall designed the Colonel Blades Contingency dagger (left) for his debut novel, Close and Destroy.
Author Tom Marshall designed the Colonel Blades Contingency dagger (left) for his debut novel, Close and Destroy.

Colonel Blades will showcase the Contingency dagger designed by military veteran and author Tom Marshall specifically for his debut novel, Close and Destroy, at the BLADE Show.

While training and researching for the book, Marshall realized he hadn’t found an EDC fixed blade that did quite what he wanted for the characters in his story. He shared his vision with Colonel Blades, who brought it to life with the no-frills, EDC-friendly Contingency in AUS-8 stainless steel and G-10. The author will be at the Colonel Blades table signing copies of the novel that inspired the knife.

Colonel Blades also will display the BRB, a new breaching tool done in partnership with Good Dude Concepts, a company with deep roots in tactical law enforcement. The BRB is a compact, lightweight breaching tool for residential structures and vehicle extrication. It is especially equipped for vehicle work with its glass-ripping profile, a feature that allows it to literally saw through laminated safety glass such as the kind used in car windshields.

Colonel Blades will display its latest knife, the Yoru push dagger, as well. Made by Fox Knives, the compact, sturdy push knife features an oversized finger hole and thumb gimping to maximize the ergonomic experience.

What’s Next?

The final BLADE Show-sponsored event for 2025 will be BLADE Show West, Oct. 10-11 at the Salt Palace Convention Center in Salt Lake City, Utah. For details, visit bladeshowwest.com. BLADE Show Texas 2026 will be March 20-21 at the Fort Worth Convention Center. Visit bladeshowtexas.com for more on it. And, of course, it’s never too late to start thinking BLADE Show 2026 June 5-7 at the Cobb Galleria Centre in Atlanta. For details, visit bladeshow.com.

Editor’s note: Smoky Mountain Knife Works is the official sponsor of BLADE Show 2025. WE Knife is the floor plan sponsor. Rosecraft Blades is The Pit sponsor. Work Sharp sponsors BLADE University. Nottingham Tactical is the lanyard sponsor. Hogue Knives is the housing sponsor. EKnives is the concessions sponsor. Kizer Cutlery is the Wi-Fi sponsor. The other sponsors are Heretic Knives, TOPS Knives, Reate Knives, QSP, Artisan Cutlery, McNees Knives and Ketuo/Rike Knives.

More On The Blade Shows:

2024 BLADE Show Texas: Big Show with a Small Show Feel

BLADE Show Texas makes the “impossible” look easy.

“BLADE, it seems, has done the impossible—having a successful knife show in Texas!” exclaimed Bill Ruple, BLADE Magazine Cutlery Hall-Of-Fame® member and “The Maestro” of custom slipjoint knifemakers. “All of the South Texas Slipjoint Cartel guys had excellent sales. I can’t wait till BLADE Atlanta!”

The fact Bill brought 10 knives to the 3rd Annual BLADE Show Texas in the Fort Worth Convention Center and sold them all pronto would seem sufficient to bear out his observation, but selling out is pretty much routine for the big friendly Texan. No, it was more than just brisk knife sales that made the third rendition of the show February 23-24 so appealing. It was also the number of people—and agreeable people at that—attending.

“The attendance at the show was off the chart,” noted exhibiting knifemaker Roger Green, who sold six of the eight knives he brought—including four push daggers to one customer—and happily entertained a number of selfie requests from show patrons. “It seems both days were equally busy.”

Blade Show Texas award winners
Most of the factory and custom knife winners proudly display their trophies after the award presentation at the Hilton Hotel Fort Worth. From left: Phil Jacob; Harvey Dean; Mark Winburn; Evan Nicolaides (ESNYX); Jason Knight (behind Nicolaides); Princeton Wong; Jared Oeser; Jim Rodebaugh; Mike Quesenberry (behind Rodebaugh); Karis Fisher; Les George; Allen Elishewitz; David Deng (Reate); Joe Vero (Vero Engineering); Anthony Marfione (Heretic); Franco de Souza (behind Marfione and Ramm holding up his three awards); Peyton Ramm; and Tim Robertson.

The atmosphere in and around the show itself impressed ABS master smith Brion Tomberlin. “I like that this show is more laid back than BLADE Atlanta. It’s easy to get to. We stayed at a nice hotel with decent room rates. There are plenty of restaurants within easy walking distance. It’s a good set up,” he wrote. “It is a big show with a small show feel, if that makes sense.” The show hall indeed was bigger, with an additional 100 exhibitors over the previous year bringing the total to more than 400, plus an additional 28,000 square feet of space. Added Brion, “More space is good.”

The mix of show patrons was all over the board. Diane Carver of Fox Cutlery in the factory section indicated about 75 percent were sophisticated knife enthusiasts “willing to purchase expensive knives.” Set up in the custom section, Tomberlin broke it down even more: “About 10 percent were seasoned collectors and enthusiasts and about 30 percent were buyers who know what they want and come for the latest trends. Sixty percent were newbies who want to see what a knife show is all about.”

The seasoned buyers and those who know what they want no doubt helped make it a successful show for many exhibitors. In addition to Ruple a number sold out, Duane Dwyer and Bobby House among them, Fox Cutlery and Pro-Tech reported brisk sales and many did more than well enough to return. Among them was Burt Flanagan, who in addition to selling his award-winning slippies also sold three heat-treating ovens in his role representing Paragon Industries. Tomberlin brought five knives and sold two, a mix from high end to lower price. “Not a fantastic show for me sales wise but not horrible, either,” he observed. ABS master smith Harvey Dean sold his slicing knife, winner of Best Kitchen Knife, for $6,400 and took four other orders in the four-figure range. Smiled Harvey, “A lot of those orders will develop into more down the line.”

Sword at Blade Show Texas
Swords were hot at the Valiant Armoury booth.

NEW AWARDS

To open up the custom and factory knife judging segments to more knife styles and contestants, show officials made several improvements.

To provide an award avenue for tomahawks, swords, innovative designs and other “specialty pieces,” the category of Best of the Rest was added to both the custom and factory segments. Also in the factory segment, the categories of Best American Made and Best Imported were added, with Best Tactical being dropped.

Finally, in an effort to recognize knives that came within a whisker of winning but were edged out for one reason or another, a new award called Best Contender was introduced to the custom segment, with three makers earning the new honor. For the list of all the award winners, see sidebars.

SEE YOU THERE!
All in all, it was a most rewarding show for most everyone who came. Next year’s show will return to the Fort Worth Convention Center March 7-8. See you there, partner.

Check Out Previous Custom Award Winners:

2026 BLADE Show Texas Factory Knife Award Winners

See which factory knives took home the coveted hardware from the BLADE Show Texas Factory Knife Awards.

The BLADE Show Texas, held March 20-21 at the Fort Worth Convention Center, saw an intense factory knife competition. With an excellent turnout of competitors and a high-level of execution on the knives, it was most definitely a showcase of the top-tier production knives at the show.

With such an impressive lineup, the three-judge panel faced a tough challenge in determining which blade best represented each of the seven categories. In short, competition was hot. With the dust settled, here are the winners who claimed top honors, including Best in Show.


Best Folder And Best Of Show: Null Knives Voodoo

Null Knives VooDoo
Jocelyn Frasier image
Null Knives Voodoo Lock Knife Natural Micarta

Null Knives Voodoo Lock Knife Natural Micarta

$350.00
Prices accurate at time of publishing. Affiliate disclosure.

Best EDC: Arcane Design Automation

Arcane Design Automation
Jocelyn Frasier image

Best Fixed Blade: Tenable Knives Loki

Best Fixed Blade: Tenable Knives Loki
Jocelyn Frasier image
Tenable Knives Tenable Loki Fixed Blade Knife Olive G-10

Tenable Knives Tenable Loki Fixed Blade Knife Olive G-10

$49.89
Prices accurate at time of publishing. Affiliate disclosure.

Best American-Made Knife: Zero Tolerance 0117

Best American-Made Knife: Zero Tolerance 0117
Jocelyn Frasier image
Zero Tolerance 0117 Pocket Knife Drop Point CPM MagnaCut Satin Blade Carbon

Zero Tolerance 0117 Pocket Knife Drop Point CPM MagnaCut Satin Blade Carbon

$240.00
Prices accurate at time of publishing. Affiliate disclosure.

Best Imported Knife: Null Knives Vandal

Best Imported Knife: Null Knives Vandal
Jocelyn Frasier image

Best of the Rest: Tactile Turn Anso

Best of the Rest: Tactile Turn Anso
Jocelyn Frasier image

See More Award Winners:

2022 Blade Show Custom Knife Award Winners

See Who Took Home Awards For the Best Custom Knives At Blade Show In Atlanta.

An expert panel of judges determined the winner in 17 categories of custom knives that were as diverse as Best Miniature to Best Bowie. Best In Show went to Dionatam Franco.

The largest knife show in the world featured exhibitors and attendees from around the globe showing off the best in all things knives.

Below are this year’s custom knife award winners from this excellent event.

Hugh Bartrug Best In Show & Best Art Knife: Dionatam Franco

Hugh Bartrug Best In Show & Best Art Knife: Dionatam Franco
Best Art Knife: Dionatam Franco. Franco created this intricate dagger accompanied with a handmade stingray sheath. 

Yvon Vachon Best Miniature: Grace Horne

Yvon Vachon Best Miniature: Grace HorneBest Miniature went to Grace Horne for these full-functioning scissors. They were handmade by her with watchmaker tools underneath a microscope.

Best Tactical Folder: Dmitry Sinkevich

Best Tactical Folder: Dmitry SinkevichBest Tactical Folder: Dmitry Sinkevich

Most Innovative Design: Walt Halucha

Most Innovative Design: Walt Halucha for this unique locking mechanism on this folding blade. 


Best Slip Joint: Luke Swenson

Best Slip Joint: Luke SwensonBest Slip Joint: Luke Swenson

Best Handle Design: Fabio Barros

Best Handle Design: Fabio BarrosBest Handle Design & Best New Maker: Fabio Barros

Best Utility Hunter: Ben Pittman

Best Utility Hunter: Ben PittmanBest Utility Hunter: Ben Pittman

Best Fighter: Henning Wilkinson

Best Fighter: Henning WilkinsonBest Fighter: Henning Wilkinson

Best Sword: Vince Evans

Best Sword: Vince EvansBest Sword: Vince Evans

Best Bowie: Tommy Gann

Best Bowie: Tommy Gann
Best Bowie: Tommy Gann

Best Fixed Blade: Vince Evans

Best Fixed Blade: Vince Evans
Best Fixed Blade: Vince Evans

Best Collaboration: Seth Lopez & Leah Aripotch

Best Collaboration: Seth Lopez & Leah AripotchBest Collaboration: Seth Lopez & Leah Aripotch. Lopez forged the knife while Aripotch created the stand.

Best Folder: Javier Vogt

Best Folder: Javier Vogt


Best Damascus: Mike Quesenberry

Best Damascus: Mike QuesenberryBest Damascus: Mike Quesenberry

Best New Maker: Fabio Barros

Best New Maker: Fabio BarrosBest New Maker: Fabio Barros

Best Kitchen Knife: Will Stelter

Best Kitchen Knife: Will StelterBest Kitchen Knife: Will Stelter

Best Of The Rest: Dmitry Sinkevich

Best Of The Rest: Dmitry SinkevichBest Of The Rest: Dmitry Sinkevich. Sinkevich said that the design was inspired by a combination of the ulu knife and watch rotor. 

Editor’s Note: This article was written by Mike Ableson.

Read More

 

BLADE University 2022: College Of Cut Schedule

Learn the latest about knifemaking techniques and other trending sharp subjects during the 9th Annual BLADE University 2022 Friday and Saturday of the BLADE Show.

Sponsored by Work Sharp, BLADE University has the most extensive schedule of knife, knifemaking and other instruction held at any knife show. New classes for 2022 include How To Forge a Sub-Hilt Knife with ABS master smith Steve Randall; Post-heat-Treat Grinding with custom knifemaker RJ Martin; How To Start a Knife Company with Diane Carver and Kimi Jensen of Brighten Blades; Keys to Outstanding Hamons with ABS master smith Brion Tomberlin; and more.

For the full list of classes, see the accompanying schedule. For enrollment and other information visit show.com/show-info/classes, or the Registration Counter in the show lobby.

Buy Your BLADE Show Tickets

BLADE University 2022 Class Schedule

FRIDAY, JUNE 3

8 a.m.-9:30 a.m.: Fundamentals of Grinding, The Courtyard. Award-winning knifemakers Tom Krein and Lucas Burnley take you through the process.
10 a.m.-11 a.m.: Exploring the History of Synthetics, Room 107. The Hawks Nest Customs team explores some of the types of synthetic materials used on knives.
10:30 a.m.-11:30 a.m.: Cryo-Quenching Steel: What It Does and Is It For Your Blades? Room 104. Steel authority and author Larrin Thomas explains the subject in detail.
1 p.m.-2 p.m.: How To Forge a Sub-Hilt Knife, Room 107. Steve Randall outlines his process for forging and building his hidden-tang sub-hilt model.
1:30-2:30 p.m.: Bladesmithing: A Teacher’s Angle, Room 103. ABS master smith Murray Carter delineates how he operated the Muteki bladesmith apprenticeship program for 10 years and provides advice on starting a larger knife manufacturing business.
3 p.m.-4 p.m.: Keys to Outstanding Hamons, Room 107. ABS master smith Brion Tomberlin will school you on most everything you need to know on the subject.
3:30 p.m.-4:30 p.m.: Hands-On Knife Sharpening Workshop, Room 113. Bring your own knife or a borrowed one and learn the progression of shaping a bevel, sharpening and edge maintenance from the team at Work Sharp.
4:30 p.m.-5:30 p.m.: Knives With History, Room 107. Knifemaker Jason Fry discusses different ways to incorporate historical material into knives.

SATURDAY, JUNE 4

8:30 a.m.-9:30 a.m.: Decorative Filework, Room 113. Knifemaker Kyle Daily of KHDaily Knives shows you his preferred files and step-by-step how he creates his five most popular patterns.
8:30 a.m.-9:30 a.m.: Post-Heat-Treat Grinding, The Courtyard. RJ Martin demonstrates techniques for grinding premium stainless steels after they have been heat treated.
9:30 a.m.-10:30 a.m.: How to Make A Coffin Knife Handle, Room 104. ABS journeyman smith Mace Vitale explains how he constructs the handles and shows you as well.
9:45 a.m.-10:45 a.m.: How To Start a Knife Company, Room 107. Diane Carver and Kimi Jensen of Brighten Blades recently started their new knife concern and share how you can start one, too.
11 a.m.-12 p.m.: Women’s Bladesmith/Knifemaker Panel, Room 113. Join ABS master smith Veronique Laurent of Belgium, Grace Horne of Sheffield, England, ABS journeyman smith Lora Schwarzer and Abie Lyons as they outline how to succeed as a woman in a male-dominated industry.
2 p.m.-3 p.m.: How to Texture Titanium Knife Handles, Room 104. Shane Magnussen of Scorpion 6 explains the grinder, appropriate machine setup, varieties of abrasive belts and more for the texturing method.
2:15 p.m.-3:15 p.m.: Hands-On Knife Sharpening Workshop, Room 113. For a redo of the class by the same name (see the description under Friday at 3:30 p.m.-4:30 p.m.), here’s your chance in Work Sharp’s encore presentation.
2:30 p.m.-3:30 p.m.: Exotic and Advanced Knife Techniques Used in Bushcraft, Room 107. Joe Flowers, knife designer and jungle guide, demonstrates and gives a presentation on outdoor-based knife skills from around the world.
4 p.m.-5 p.m.: Linerlock/Framelock Design & Construction Geometry, Room 104. David Carver of Carver Knife Co. teaches basic design, steps to build and the processes needed in detail, as well as flow, lock geometry and completion.

2024 BLADE Show West Preview: The West’s Largest Knife Show

0

Ready to rock in the Rocky Mountains!

A larger show hall, more exhibitors, some of the world’s best makers and knives, entertaining seminars, awards and other sharp stuff beckon you to attend BLADE Show West Oct. 4-5 in the Salt Palace Convention Center in Salt Lake City, Utah.

A move to the Salt Palace’s exhibit hall No. 4 adds 15,000 square feet to this year’s show, and along with the added space come 30 more exhibitors to join the hundreds of knifemakers, bladesmiths, knife companies, knife suppliers and other knife professionals at the third annual rendition of the BLADE Show West held in Utah.

Blade Show West Tickets

Among the top custom makers set to exhibit is an unbridled posse of South Texas Slipjoint Cartel members that includes BLADE Magazine Cutlery Hall-of-Fame® member Bill Ruple, award-winning makers Luke Swenson, Enrique Pena and Tim Robertson and others. An all-star list of ABS bladesmiths features Bill Burke, Shane Taylor, Steven Koster, Seth Lopez, Shayne Carter and Trevor Morgan, to name a few. Other top award-winning makers include Johnny Stout, Princeton Wong, Mick Strider, Duane Dwyer, Evan Nicolaides, Mike Tyre, Jared Oeser and Brian Nadeau. There are many more.

2024 BLADE Show West Classes And Demos

Let The Pro Critique Your Knife

While the full seminar slate had not been set at press time, the popular Let the Pros Critique Your Knife session was set to return, with some of the leading custom maker show exhibitors expected to examine and critique knives made by assorted show attendees. As usual, it will be a limited-seating event and attendees can bring one knife only.

Luke Swenson inspects a patron’s knife at last year’s show.
Select show attendees will have their knives examined by the world’s best custom makers in the popular “Let The Pros Critique Your Knife” seminar. Luke Swenson (right) inspects a patron’s knife at last year’s show. The makers participating in this year’s seminar were being assembled at press time. See the free BLADE Show West program at the show for more info.

Basecamp Essentials

Basecamp Essentials by Survival University will be a 30-to-45 minute demonstration designed to introduce essentials of wilderness living. “We will demo how to create various camp comforts such as benches, chairs, and other useful camp tools, using materials found in the natural environment,” a company spokesperson wrote. “This demo goes beyond the basics of survival, focusing on enhancing comfort and fostering a sense of community in the wilderness.”

West Coast Flipping Championships

Also set to return is the West Coast Flipping Championships hosted by Squid Industries. It will be the fifth annual version of the championships, with head-to-head/live balisong flipping matchups in an elimination/bracket-style competition. Awards and prizes will go to the top finishers. For the complete seminar schedule, see the free BLADE Show Program distributed at the show.

2024 BLADE Show West Awards

The show’s best custom and factory knives will be determined by a panel of judges assembled by the BLADE Show West staff. This year’s custom knife categories: Best in Show; Best Hunter; Best Kitchen Knife; Best Damascus; Best Slip Joint; Best Fixed Blade; Best Folder; Best M.A.C.K. (Machine Assisted Custom Knife); and Best of the Rest.

Winner of Best Fighter at BLADE Show 2024, bladesmith Seth Lopez
Winner of Best Fighter at BLADE Show 2024, bladesmith Seth Lopez will showcase his curvaceous creations. His recurve fighter boasts a compound-ground blade of a damascus of 1080 carbon and 15N20 carbon steels. Handle: desert ironwood burl. Overall length: 8.75 inches. (SharpByCoop image)

On the factory side, the award categories are Best American Made, Best Imported, Best EDC, Best Fixed Blade, Best Folder and Best in Show.

For the times and locations for the judging, signs and schedules will be prominently placed in and around the show hall. Also, see the free BLADE Show West Program distributed at the show for updates.

The winners will be announced and presented their awards in a special ceremony the Friday night of the show. See the free BLADE Show West Program for the time and venue.

2024 BLADE Show West Hidden Gems

The factory knife section is always a beehive of activity at BLADE Show West, and this year’s rendition promises more of the same. Leading exhibiting knife companies include CRKT; Emerson Knives, Inc.; Fox Knives; GiantMouse; Heretic; Hogue; Lionsteel; Pro-Tech; SOG; Spyderco; Squid Industries; McNees Knives; Suprlativ Knives; Tactile Knife Co.; TOPS Knives; WE Knife; White River Knife & Tool; and others. For the complete exhibitor list, visit bladeshowwest.com.

CRKT Blade Show West knife booth
CRKT will host custom knifemaker/designer Richard Rogers and his wife Sally to answer questions about Richard’s latest CRKT designs. CRKT’s Doug Flagg (center) talks knives with Cutlery Shoppe’s Jeff Loffer (right) and two patrons at BLADE Show West 2023.

One of the hidden gems of the factory section is you never know who might show up, including custom makers who engage in collaborations with select companies. For example, the CRKT booth will feature award-winning custom knifemaker Richard Rogers, along with his wife Sally, to answer questions about Richard’s latest CRKT designs. Other CRKT maker/designers exhibiting at the show will be Eric Ochs, TJ Schwarz and Princeton Wong. Ochs will exhibit under Ochs Worx, Wong under Prince Customs and Schwarz under Schwarz Knives.

Danish knifemaker Jens Anso, along with fellow Danish maker Jesper Voxnaes the design team behind most if not all of GiantMouse knives, will be stationed at the GiantMouse booth. Knife designer Tony Sentmanat will be based at the WE Knives booth. WE maker/collaborators Ben Petersen and Zac Whitmore also will attend the show and may appear at the company’s booth at times.

While TOPS Knives won’t have any custom knifemaker designers on hand, it will have headman/head knife designer Leo Espinoza in attendance, as always. Case will continue showcasing its first Bill Ruple collaboration, and Bill will have a table at the show, too, so chances are he will make an appearance at the Case booth as well. There no doubt will be other company booths serving as the destination of custom makers/designers, custom makers in general, and more.

More On BLADE Show West:

BLADE Show Factory Knife Debuts 2023

Eyeball a few factory knives that will debut at the BLADE Show.

For the knife event where more cutlery companies introduce more of their new knives, the BLADE Show takes a backseat to none—which figures since the BLADE Show is the sharpest shindig of them all.

On this and the accompanying pages are samples of some of the factory knives that either debuted at the BLADE Show or had their consumer show introductions there.*

We didn’t have room for all the debut knives of every exhibiting company, so do some legwork and you’ll probably find new/debut knives you like even better than these.

STRIDER PT+ AUTO/PRO-TECH

Strider

Knife type: EDC folder/automatic 
Blade length: 3.14”
Blade material: MAGNACUT stainless steel
Blade grind: Flat
Handle material: Lightweight anodized aluminum
Lock/opening mechanism: Push-button auto 
Pocket clip: DLC-coated mini deep carry
Special Features: Strider’s signature design and compact form have been updated to a slightly larger size; the spring has been upgraded to snap the blade open with authority
Weight: 3.21 ozs.
Closed length: 3.96”
Country of origin: USA
MSRP: $300
AVAILABLE FOR SALE TO THE PUBLIC: NOW; through the year additional colors and variations will be available (image by Derek Lawrence)

SHADOW/KETUO

Ketug

Knife type: Flipper folder
Blade length: 3.78”
Blade material: Bohler M390 stainless steel
Blade grind: Flat
Handle material: 6Al4V titanium
Lock mechanism: Flipper Lock
Pocket clip: 6Al4V titanium
Weight: 5.29 ozs.
Closed length: 4.96’”
Country of origin: China
MSRP: $380-$420
AVAILABLE FOR SALE TO THE PUBLIC: June

GENTLEMAN’S FOLDER/OCASO

Ocaso

Knife pattern: Gentleman’s folder
Designer: Andrew Demko
Blade length: 3.5”
Blade material: Choice of CPM S35VN stainless steel or German damascus
Blade grind: Full flat
Handle material: Carbon fiber, titanium or fat carbon
Lock/opening mechanism: Flipper w/linerlock or framelock
Pocket clip: Ambidextrous stainless steel in a Demko signature fold-over deep-carry design
Action: Stainless-steel caged bearings
Weight: 1.7 ozs. (carbon fiber) or 2.5 ozs. (titanium)
Closed length: 4.26”
Country of origin: Taiwan or Italy
MSRP: $209.99-$399.99
AVAILABLE FOR SALE TO THE PUBLIC: NOW

TERRACHETTE/CONDOR TOOL & KNIFE

Condor

Knife type: Bushcraft machete
Blade length: 14.6”
Blade material: 1075 carbon steel
Blade grind: Convex
Handle material: High/impact polypropylene
Special features: Near the handle the edge is designed for more controlled carving; extended pommel
Weight: 25.4 ozs.
Overall length: 20.72”
Country of origin: El Salvador
MSRP: $69.69
AVAILABLE FOR SALE TO THE PUBLIC: Most everywhere by BLADE Show

RIE COLLABORATION SPORT 100/MCUSTA

Mcusta

Designer: Mike Irie
Knife pattern: Hunter
Blade length: 3”
Blade material: VG-10-core damascus
Blade grind: Hollow
Handle material: Micarta®
Special features: Tsuchime-finished blade
Weight: 3.4 ozs.
Overall length: 6.5”
Country of origin: Japan
MSRP: $300
Available for sale to the public: Summer ’23

WILLY/LIONSTEEL

Willy

Model type: Fixed-blade EDC
Blade length: 2.55”
Blade material: M390 stainless steel
Blade grind: V flat
Handle material: Choice of canvas Micarta®, woods, carbon fiber
Special features: Titanium guard
Weight: 2.04 ozs.
Country of origin: Italy
MSRP: $201.70 (at press time rate of exchange)
Available for sale to the public: June

VICEROY/MEDFORD KNIFE & TOOL

Viceroy

Knife pattern: Balisong          
Blade length: 4.5”
Blade material: CPM S45VN stainless steel
Blade patterns:  Choice of drop point, tanto, dagger, seax and wharncliffe
Handle material: Titanium
Handle lock: Latchless
Pocket clip: None
Special features: Integral solid channel, zen pin, custom bushings, rounded handles, Chaplin groove, machined handle texture, hand-ground blades
Weight: 4.3 ozs.
Closed length: 5.7”
Country of origin: USA
MSRP: $750
AVAILABLE FOR SALE TO THE PUBLIC: At BLADE Show ’23

VULPIS/FOX

Fox

Model type: Multi-purpose multi-blade
Main blade length: 5.31”
Blade material: M390 stainless steel
Blade grind: Flat
Handle material: Bead-blasted titanium w/lanyard hole
Lock/opening mechanism: Slip joint
Special features: Bottle opener, can opener, flat-head screwdriver, hacksaw and scissors
Weight: 2.25 ozs.
Closed length: 2.94”
Country of origin: Italy
MSRP: $119
AVAILABLE FOR SALE TO THE PUBLIC: May

STOK BOWIE/SPYDERCO

Spyderco

Model type: Fixed blade
Blade length: 2.95”
Blade material: 8Cr13MoV stainless steel
Blade grind: Saber
Handle material: OD green G-10
Knife to know: Designed as an urban EDC fixed blade
Weight: 2.1 ozs.
Overall length: 6.45”
Sheath: Boltaron® w/G-Clip™ attachment for adjustable belt and inside-the-waistband carry
Country of origin: China
MSRP: $100.
AVAILABLE FOR SALE TO THE PUBLIC: NOW

SPARTAN-KA-BAR/SPARTAN BLADES

Kabar

Designer: KA-BAR Knives
Overall length: 12”
Blade length: 7”
Blade at thickest: .165”
Blade material: CPM MagnaCut stainless
Rockwell hardness: 60-62 HRC
Blade pattern: Clip point
Blade grind: Flat saber
Blade finish: Choice of PVD-tungsten DLC (flat black) or ZrN (flat dark earth)
Handle Material: Kraton G®
Buttcap/guard: 301 stainless steel w/PVD-tungsten DLC (flat black) coat
Weight: 10.78 ozs.
Sheath: Leather
Country of origin: USA
MSRP: Starts at $325
Available for sale to the public: NOW

ENERGY/MASERIN

Masrin

Model type: EDC flipper folder
Blade length: 4.133”
Blade material: D2 tool steel
Blade grind: Flat
Handle material: Titanium
Pocket clip: Titanium
Weight: 5.926 ozs.
Closed length: 5.23”
Country of origin: Italy
MSRP: $328
Available for sale to the public: May

LIVEWIRE/KERSHAW

Kershaw

Model type: Out-the-front auto
Blade length: 3.3”
Blade material: CPM 20CV stainless steel
Blade grind: Flat
Handle material: Aluminum
Pocket clip: Reversible deep-carry, steel
Special features: Lightweight button
Weight: 3 ozs.
Closed length: 4.8”
Country of origin: USA
MSRP: $380
AVAILABLE FOR SALE TO THE PUBLIC: NOW

GHOSTFISH/ROUGH RYDER RESERVE

Rough Ryder

Designer: Brian Wilhoite
Model type: EZ-Open sunfish
Blade length: 2 7/8”
Blade material: D2 tool steel
Handle material: White Micarta®
Lock/opening mechanism: Slip joint w/half stop
Weight: 5.5 ozs.
Closed length: 3 7/8”
Country of origin: China
MSRP: $84.95
AVAILABLE FOR SALE TO THE PUBLIC: Late fall

GMX/GIANTMOUSE

GiantMouse

Model type: EDC /outdoor folder
Blade length: 3.25”
Blade material: CPM S90V stainless steel
Blade grind: High flat saber
Handle material: Titanium w/brass inlaid bolster
Lock: Framelock
Pocket clip: 3D-machined titanium
Special features: Integral titanium handle
Weight: 3.8 ozs.
Closed length: 4.3”
Country of origin: China; manufactured by Reate
MSRP: $445
AVAILABLE FOR SALE TO THE PUBLIC: NOW

5” GALAXY BUTTERFLY/BEAR & SON

Bear and Sons

Model type: EDC balisong
Blade length: 3 5/8”
Blade material: 440 stainless steel
Blade grind: Hollow
Handle material: Zinc w/Galaxy finish
Lock: Latch
Weight: 5 ozs.
Closed length: 5”
Country of origin: USA
MSRP: $68.99
AVAILABLE FOR SALE TO THE PUBLIC: NOW

MODERN GLADIUS/TOPS KNIVES

Tops Gladus

Knife type: Tactical  
Blade length: 6.5”
Blade material: 1095 high carbon steel
Blade grind: Dagger/flat
Handle material: Tan canvas Micarta®
Knife to know: Blade has a double edge
Weight: 8.3 ozs.
Overall length: 11.5”
Country of origin: USA
MSRP: TBD
AVAILABLE FOR SALE TO THE PUBLIC: TBD

YUUKI/LATAMA x VICTORIAM

Yuuki

Model type: EDC flipper folder
Blade length: 3.5”
Blade material: CPM 20CV stainless steel
Blade grind: Kissaki-unokubi-zukuri compound; hollow belly and convex tip
Handle material: Grade 5 titanium
Lock: Button lock
Pocket clip: Titanium
Weight: 4.59 ozs.
Closed length: 4 5/8”
Country of origin: China
MSRP: $200 (estimated)
Available for sale to the public: May

BUCKMARK SLIM/BROWNING

Buckmaster

Knife type: Flipper folder
Blade length: 2.75”
Blade material: D2 tool steel
Rockwell hardness: 56-60 HRC
Blade pattern: Drop point
Opening mechanism: Assisted
Pivot action: Ball bearings
Handle: Polymer
Bolster: Stainless steel
Pocket clip: Adjustable
Lock: Linerlock
Closed length: 3.75”
Country of origin: China
MSRP: $29.99
Available for sale to the public: NOW

LULBEGRUD/OUTLIER

Outlier

Designer: Craig Caudill 
Category: EDC/outdoors/self-defense
Blade Length: 3.68”
Blade material: 52100 carbon steel
Blade at thickest: 1/8”
Blade finish: Parkerized and tumbled
Blade pattern: Drop point
Blade grind: Flat
Edge sharpening angle: 18 degrees
Handle: Coarse-textured, layered G-10
Weight: 6.84 ozs.
Sheath: .08”-thick thermoplastic 
Overall length: 8.62”
Sheathed weight: 8.26 ozs.
Country of origin: USA
MSRP: Approximately $200
AVAILABLE FOR SALE TO THE PUBLIC: At BLADE Show ’23

*Some of the knives shown for the first time at the show won’t be available for sale to the general public until later in the year. Check each individual knife’s spec box for details.

Check Out More Buyer’s Guides:

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement