Featured Knives

Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.

Click here to browse through our list of Featured Knifemakers.

Knifemaking – – Knife Collecting – – Tactical Knives – – Survival Knives

4 Very Different Versions of the EDC Folder

Once upon a time a long time ago, my idea of the perfect everyday carry knife was a Randall Model 1. Most of the guys I worked with back then carried 16- to 18-inch pangas every day.

Times change. People change. I no longer carry a Randall in an inside waistband clip sheath every day, or at all, really. No doubt there are many folks today who strap on a 10-inch bowie or a USMC fighting/utility knife every morning before breakfast. To that you can add the legions who EDC a tactical folder.

There are, however, many folks who prefer to carry simple pocketknives. Almost every cowboy I know carries an old school Schrade or Case stockman in the watchpocket of his Wranglers. Many other folks, some constrained by knife laws, EDC more contemporary versions of the traditional pocketknife, the knife that at one time was in every schoolboy’s and every man’s pocket—for some, a gentleman’s folder.

My team and I recently did a field review of four very different contemporary versions of the EDC folder. If we were cowboys I reckon we could have trimmed hoofs, done minor surgery on cows and other cowboy things. But we’re not cowboys. So, we used them for the stuff we tend to do. We opened boxes and cut up cardboard. We did cut rope, which felt kind of cowboyish. We went for a hike and picked and sliced fresh rose hips for tea, peeled and sliced oranges for a trailside picnic, cut pine limbs and whittled fuzz sticks to start a lunchtime fire. Not exactly gentleman stuff either, but hey, everyone has his own EDC needs.

Four of the latest in EDC knives, counterclockwise from right: V Nives Killabite, Pro-Tech Knives Malibu Wharncliffe, Medford Knife & Tool Gentleman Jack and Smith’s Edgework-Site Wharncliffe Knife.

SLIM JACK: Medford Knife & Tool Gentleman Jack

Sleek, slim and lightweight, with a blade long enough to slice a watermelon without getting your hand wet, the Medford Knife & Tool Gentleman Jack is a gentleman’s folder in appearance, in feel and in fact. With little effort, its slim blade excelled at cutting nylon kernmantle rope, and at food preparation and slicing thin peels of bark for tinder. The slender handle looks as if it would be uncomfortable, but the edge was so sharp and the grind so slim that little force was required to cut stuff. Hence, the thin handle was not uncomfortable. The slenderness made it easy to carry—we all hardly knew we had a knife in our pocket when carrying it.

With little effort, the slim blade of the Medford Knife & Tool Gentleman Jack excelled at cutting nylon kernmantle rope.

Most folders in this size range tend to be tactical, with black blades and other features the uninformed consider fearsome. This folder, however, is so nice looking, so polished a piece of pocket jewelry, that it’s unlikely to alarm the clueless, which means you could use it in mixed company without getting weird looks.

SPECS: Medford Knife & Tool Gentleman Jack
Blade Length: 3.1”
Blade Steel: CPM S35V stainless
Blade Width: ¾”
Blade Thickness: .125”
Handle Material: Anodized titanium
Action: Slip joint
Closed Length: 4”
Country of Origin: USA
MSRP: $375

 

WORKADAY FOLDER: Smith’s Edgework-Site Wharncliffe Knife

The Smith’s Edgework-Site Wharncliffe Knife is a workaday folder that equals many high-priced limited-production knives in durability and function. Robust, with a very comfortable handle and a good edge grind, it was our preferred blade for getting up some wood for a fire. Press cuts with modest effort cut deep into, and through, wrist-thick pine branches. In fact, it was the most effective of all the review knives at cutting wood for the fire. Shaving bark and curls for tinder was a piece of cake.

According to the author, the Smith’s Wharncliffe is a workaday folder that equals many high-priced limited production knives in durability and function.
 

I am not a fan of wharncliffe blades, but the long straight edge and overall cutting efficiency might make me a convert. The edge was very welcome when cutting nylon rope laid across a tree stump, and cutting cardboard boxes into strips. Did I mention the handle? Clearly it is designed by someone who understands hard work, and for someone who must do a day’s work. This is a very good tool and, for the price, a great value.

The edge of the Smith’s Wharncliffe was very welcome when cutting nylon rope laid across a tree stump, and cutting cardboard boxes into strips.

 

SPECS: Smith’s Edgework-Site Wharncliffe Knife
Blade Length: 2.95”
Blade Steel: 400 series stainless
Blade Pattern: Wharncliffe
BLADE OPENER: Thumb stud
Handle: Glass-filled textured synthetic w/pocket clip
Lock: Framelock
Closed length: 4”
MSRP: $24.99

 

ROCKETKNIFE: Pro-Tech Malibu Wharncliffe

The Pro-Tech Knives Malibu Wharncliffe is handsome, modern in appearance and detail, and resembles a 21st-century knife designed to be carried by an astronaut. In fact, the knife looks a little like a rocket—and has a high-tech lock to boot.

The Pro-Tech Malibu Wharncliffe easily and cleanly crunched through nylon rope and kept its edge cutting cardboard.

It also performs well. The overall blade design with its flat grind, fine edge and up-tipped point was terrifically efficient at all slicing tasks. At first glance I thought the point design might inhibit penetration, and it did. But something in the geometry that eludes me made it very efficient at all cutting and slicing tasks. It easily and cleanly crunched through nylon rope, kept its edge cutting cardboard, and was just the thing for slicing rose hips for tea. It did very delicate cuts cleanly and with precision. With its modestly sized blade, brilliant blue handle and overall polished appearance, it qualifies as a large gentleman’s folder, albeit one with more function than the usual run of that type of knife.

Something in the geometry that eluded the author made the Pro-Tech Malibu Wharncliffe very efficient at all cutting and slicing tasks. He uses it here to collect pine sap to help start a fire.

SPECS: Pro-Tech Knives Malibu Wharncliffe
Blade Length: 3.25”
Blade Steel: CPM 20CV stainless
Blade Thickness: .125”
Blade Style: Modified wharncliffe
Blade Finish: Stonewash
Blade Grind: Flat
Blade Opener: Flipper
Lock: Plunge lock
Closed length: 4.25”
Country of Origin: USA
MSRP: $270

 

MUST-WORK MINI: V Knives Killabite

Can we say the V Nives Killabite is cute?

I don’t usually use that word when discussing knives, but, truth be told, this little puppy is cute. High-tech, too. The damascus blade, carbon fiber handle and framelock all say dress tactical folder. Miniature, yeah, but still pretty tactical.

Don’t let little knives fool you, though—they are useful. I’ve been beating the drum for tiny blades for years ever since I learned a little bit about flintknapping and worked with some experimental archaeologists. (One of the latter was the lithic expert who consulted on Otzi the Iceman, the 5,000-year-old mummy discovered in the Alps who had a complete tool kit with him, including his flint knife with a 1.5-inch blade.) I’ve taught survival classes during which I use a folder with a 2-inch blade to make a tool kit consisting of a spear, bow and arrows, haft for a stone axe, and more. I wouldn’t hesitate to do the same with the Killabite.

The V Nives Killabite peeled and sectioned an orange with aplomb. The handle has a nice curved profile and is comfortable as such a small handle can be, comfortable enough for the kind of work that you would do with the knife.

The trailing point design and smooth edge with no ricasso or other fripperies makes the most of the short blade. The edge is just a tad thicker than I prefer, which makes it strong at the cost of a little slicing ability, but allowed it to bite deep into wrist-thick pine with no trouble. For long term use I might reprofile the edge—or maybe not. I like the notion of such a small blade being so strong.

The V Nives Killabite vanquished pine pieces for firewood. It bit deep into wrist-thick pine with no trouble.

The handle has a nice curved profile and is comfortable as such a small handle can be, comfortable enough for the kind of work that you would do with the knife. Keep in mind, too, a surgeon’s scalpel is only 1.5 inches long. Must work gets done with small blades. A keeper this one is.

The trailing point design and smooth edge with no ricasso or other fripperies makes the most of the Killabite’s short blade.

SPECS: V Nives Killabite
Blade Length: 1.4”
Blade Steel: Stainless damascus
Blade Thickness: .097”
Blade Style: Trailing Point
Blade Opener: Flipper
Blade Grind: Flat
Handle Material: Carbon fiber
Handle Thickness: .35”
Pocket Clip: Tip-up
Lock: Framelock
Weight: 1 oz.
Closed Length: 2.25”
Countries of Origin: USA and offshore
MSRP: $95.95

ONLY YOU KNOW

Which would be the best EDC? There’s no such thing, really. The right question is, which is the best EDC for you?

Only you will know the answer.

 

8 Amazing Additions To Any Knife Book Library

One thing that humble knifemakers find difficult to do at times is to express pride in their work. It’s the same thing with we knife editors and publishers. But when you look at these eight knife books that F&W Media has put out over the past few years, they’re not only impressive as a whole, but each individual title is clearly an example of quality work.

If you were interested in knifemaking and started with the two books Bladesmithing With Murray Carter and Knifemaking With Bob Loveless, you’d be well ahead of the game and your peers. Add in BLADE’s Guide To Making Knives, 2nd Edition, and suddenly you’re learning the craft from such knifemakers as Don Fogg, John Lewis Jensen, Tim Zowada, Allen Elishewitz, Vince Evans, Rick Dunkerley and Kevin Hoffman. Are you kidding me?! And how many of you have NOT heard of Wayne Goddard? His book The Wonder Of Knifemaking, 2nd Edition is a must-have for any knife book library.u1059_500px_72dpi_1 v0802 W1852 W5865 X3269 Z4387 Z7240 Z7241

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If custom or handmade knives are your thing, the 33rd Edition of the Knives annual book, Knives 2013, will blow you away with full-color photography, feature articles written by the world’s best knife writers and a complete directory of custom knifemakers. Another sweet, full-color, gorgeous coffee-table book is Spirit Of The Sword by Steve Shackleford. It takes you on a trip from historic to modern swords and back again.

For knife collectors, you can’t go wrong with a book devoted entirely to Case Knives, the most collected brand in the world. Check out Collecting Case Knives by long-time collector, expert, accumulator and investor in everything Case, Steve Pfeiffer. And if after all that, you’re ready to design your own knives, or just need inspiration from over 100 classic knife designs, be sure to put in your pre-order for the brand-new, soon to hit bookshelves and stores everywhere 101 Knife Designs by none other than Murray Carter.

Admittedly, that’s one impressive knife book lineup, and would make any knife enthusiast’s library complete!

What is Freeze Edging?

“Freeze edging” takes place during grinding, and it involves controlling the temperature on the edge of the blade. This helps retain the hardness following the heat treating, assuring sharpness and durability of the blade.

To check out the results of freeze edging, put the K-1 or K-3 from Reate Knives into your hands. The company uses it in concert with RWL34 steel, an alloy similar to 154CM made by Damasteel. Chromium, molybdenum and vanadium offer greater corrosion resistance, hardness and strength.

Learn more at the Reate website, and check out these models:

 

K-1 knife from Reate Knives
K-1

Ceramic ball bearing system
Blade Length : 3.8”
Blade Thickness:0.157″
Overall Length:8.8’’
Blade Material: RWL34 (Made by Damasteel company)
Hardness: 60-61HRC
Handle Material:6AL4V Titanium
Inlay Material : Marble Carbon Fiber/ Carbon Fiber
Weight:4.93 oz
Locking: Frame Lock

More information about the K-1 from Reate Knives.

K-3 knife from Reate Knives
K-3

Multi-row ball bearing system
3-D machined Titanium handle Blade Length : 4.6″
Blade Thickness: 0.157″
Overall Length: 8.7″
Hardness: 60-61HRC
Handle Material: 6AL4V Titanium
Weight: CF ilay: 5.3oz/Mokuti inlay:6.0oz
Locking: Frame Lock

Visit the Reate Knives website.

Knife For Veteran’s Day

On Veteran’s Day (11/11/13), U.S. Elite Gear, in collaboration with Rustick Knives, plans to introduce a limited-edition (you guessed it, only 11 knives will be released initially) fixed-blade “Kraken” model for sale through U.S. Elite’s website, www.US-EliteGear.com. The Kraken features a 6-inch, recurved, tan-Cerakote™-treated blade of 1/4-inch-thick 80CrV2 tool steel, black G-10 handle scales and a “coyote”-brown Kydex® sheath with a Blade-Tech clip for attachment to gear.Kraken-Knife-main

Designed by SGM Jack Stottlemire (retired), founder of Rustick Knives, and U.S. Elite’s Jim Erwin, former Army Ranger and 1st SFOD-D operator, who the knife is inspired after, the knife is manufactured in the Rustick Knives production facility in Ft. Bragg, North Carolina.

“Having served for 26 years as a Marine, paratrooper and Special Operations soldier, with 12 combat tours, I know firsthand that a soldier needs a good strong knife that is not going to fail,” stated Stottlemire. “Just about every soldier on the battlefield carries a fixed-blade knife on his kit, it just feels right, and is one of those essential items that we all must have.

The 11 limited-edition Kraken knives will be available for purchase for $350 each through www.US-EliteGear.com on November 11th, Veterans Day.  After those are exhausted, un-serialized knives will be available for $299 each.

For other tactical fixed blades, click here.

 

 

Featured Knife: Mako Folder by MacGray & Co.

Best folding knives featured BLADE magazine
In addition to being a fine example of a modern folder, the Mako Folder from MacGray & Co. is made in the U.S. from domestic materials.

Specs

  • Company: MacGray & Co.
  • Knife: Mako Folder
  • Designer: MacGray & Co.
  • Length: 8 1/2 inches
  • Blade: CPM 154, saber grind, modified drop point design
  • Lock: Titanium Liner Lock
  • Handle: Black Micarta Handle
  • Ambidextrous thumbscrew
  • Stainless steel variable clip

An All-American Knife

The MacGray & Co. Mako Folder knife is made in San Marcos, California, with quality materials from small American suppliers. The frame is milled from Grade 5 titanium for an excellent combination of strength, weight reduction and corrosion resistance.

The Mako sports a tried and true locking liner, which is self-adjusting to wear and prevents the blade from closing on the user’s hand as it grasps durable Micarta or G-10 handles.

The Steel: Two Great Choices

The blade is ground from your choice of two steels.

D2 is a high carbon, high chromium steel that offers excellent resistance to wear and abrasion, holding an edge very well. It is often referred to as “semi-stainless” due to its high resistance to corrosion.

The other option, CPM-154 stainless steel, is created in a process that produces a uniform distribution of the carbides. This provides material consistency, greater resistance to breakage and toughness. It’s an excellent stainless steel with high wear resistance.

The Blade: Strong and Sturdy

The satin-finished blade has a sabre grind for additional strength and sturdiness. MacGray & Co. harden, cryo-quench and temper blades in house.

No Detail Left Untouched

The Mako sports a stainless steel, .25-inch pivot with a bronze pivot bushing. It features a stainless steel pocket clip, hardware and ambidextrous thumb screw.

A Lifetime Guarantee

Each MacGray & Co. knife is made by three guys who love what they do. It’s no surprise that they stand behind their work with a lifetime guarantee and are committed to giving the highest level of service to knife enthusiasts.

Where to Get This Knife

The Mako Folder from MacGray and Co. is available here and ready to be added to your knife collection. Don’t miss it!

Do You Have Your Hunting Knife?

There is no single profile that fits all hunters, and there isn’t a specific hunting knife that fulfills all needs. That’s a good thing for the knife industry. Some guys like a standard fixed-blade, drop-point hunter that comes in a leather belt sheath, maybe even with a slight hump near the tip of the blade where they can rest their finger and choke up on the blade. One of custom knifemaker Russ Kommer’s favorite packages is the 2-Shot. He has used it daily in the field as a hunting guide in Alaska and around the world. X3351Russ says, “I’ve always preferred a smaller semi-skinner, even for the biggest of game. You just use the hump near the end of the blade to locate your index finger. And the blade is short enough that you can work inside the animal and feel where you are at all times.” The CRKT Kommer 2-Shot Skinner Knife has a 3.15-inch full-tang 12C27 Sandvik stainless steel blade, stainless bolsters, orange G10 handle scales and stainless steel pins.

Y3351

Some ever-prepared hunters aiming for big game opt for a hatchet/skinner combination pack such as the Timberline Hatchet/Bush Guide Skinner Combo. It includes Kommer’s Alaskan Bush Pilot Hatchet and Alaskan Skinner. Expertly crafted from polished 440 stainless steel, the Alaskan Bush Pilot Hatchet boasts a 4-inch, full-tang head, while the Alaskan Skinner sports a 3.625-inch 440A stainless steel skinner blade. Each handle is precision machined Zytel for a non-slip grip and ease of use. The Alaskan Combo includes a ballistic nylon sheath with belt loop, and weighs 2.28 lbs.

Y7735

Gut hooks come in handy for skinning game animals, and a Realtree-pattern handle is a plus. The Kutmaster Team Realtree Guthook Knife dons a 420 stainless steel blade with sharp gut hook on the spine, a Realtree camo handle pattern, and a nylon belt-loop sheath. 

For many more quality options, visit ShopBlade.com, and stock up for the hunt!

Tracking Knife Trends

dark earthThere aren’t many dull, boring or mundane trends, and for good reason.

Knifemakers embrace the old saying, “change is constant.” The “same old, same old” never catches on with a new generation. Knife craftsmen strive for fascinating and innovative ways of blade building, and collectors seek out the rare and unusual.

Eventually knifemakers find something modern that is not only aesthetic and utilitarian, but it also catches on with other artists. That’s the start of a trendBPK

You get the idea—trends are born out of creative thinking and design capabilities, and not from copying old patterns without any tweaking, improving or thinking outside of the box.

Sure, some trends have staying power. There are many new trends to take in, like dimpled, sculpted, grooved and glass-beaded knives, for example. Britton_121118

It is a trend in knives that presented itself to me while I poured over 1,000s of images from knife photographers for possible inclusion in the Knives 2014 book, now available and a gorgeous book, if I may say so myself, but not because of anything I did. It’s the knives and images thereof that make it a handsome title, and the Trends, State Of The Art, Factory Trends and Feature articles therein.

Enjoy, and keep your eyes peeled for new knife trends in the industry, particularly if you’re a collector, investor or general enthusiast with a habit of accumulating custom or production pieces.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement