Home Blog Page 268

2012 BLADE Show Custom Knife Judging Rules

 

Rodney Watts won Best New Maker at the 2011 BLADE Show for his fancy fighter (above).

 

    The 31st annual BLADE Show (www.bladeshow.com) will be June 8-10 at the Cobb Galleria Centre in Atlanta. One of the most important events is the custom knife judging. Below are the rules:

 

NOTE! These rules are subject to change!

 

Special Note: The following rules are in effect for the 2012 BLADE Show Custom Knife Competition.  Any violation of the rules may make the knife and/or the maker ineligible for awards. Any infraction validated after the award presentation may result in the forfeiture of the award.

 

WHAT: The Custom Knife Competition For The 2012 BLADE Show & International Cutlery Fair

WHEN: Friday, June 8, 2012

WHERE: At 3:30 p.m. bring your knife/knives to seminar room #104 for judging. No entries accepted after 4 p.m.

 

QUALIFICATIONS

 

1)     Custom knives can be submitted and accepted only from table holders at the 2012 BLADE Show.  (Shared tables must be declared to show management before the show begins.)

2)     The maker must submit the knife personally and so identify himself/herself as the maker of the submitted knife.  The maker’s business card or some other form of identification should accompany each knife.

3)     The BLADE Show is not liable in any way for the submitted knife while under the care of the BLADE Show.

4)     To be eligible for competition, the submitted knife must have been made after June 1, 2011, and never previously received an award from the BLADE Show.

5)     The knife must be of the entering maker’s construction, excluding embellishments (engraving, scrimshaw, filework, etc.) and materials.

6)     By entering this competition, the entrant confirms that he/she has read all of these rules and qualifications and agrees to said rules.

CATEGORIES:

 

Hugh Bartrug Best in Show            Best Art Knife                                 Best Tactical Folder                           Best Knife Collaboration                 Best Fixed Blade                            Best Fighter                                   

Best Utility Hunter                           Best Sword                                     Best Damascus                             

Best Bowie                                      Best Folder                                       Best New Maker

Yvon Vachon Best Miniature           Best Handle Design                        Most Innovative Design                    

Best Of The Rest

 

BEST KNIFE COLLABORATION: For the best handmade collaboration between two or more artists (knifemaker/knifemaker, knifemaker/embellisher, knifemaker/designer, etc.) on one knife.

BEST NEW MAKER CATEGORY: This category is limited to those who have been making knives for five years or less.

HOW MANY KNIVES YOU CAN ENTER: You may enter up to three (3) knives in the competition, but only one (1) knife per category and one category per knife (in other words, you cannot enter the same knife in more than one category).

BEST UTILITY HUNTER: Should be a hunting knife designed for use in the field.

BEST HANDLE DESIGN: Should be a handle that is notable for its design, whether utilitarian, aesthetic or both.

BEST OF THE REST: For cutting tools that do not fit well in any of the other categories (tomahawks, multi-tools, fantasy knives, ulus, etc.)

WHERE AND HOW TO ENTER YOUR KNIVES: Tables labeled by category will be set up in seminar room #104.  Put your knife on the table pertaining to its category, along with your business card.

HOW TO PICK YOUR CATEGORY: There may be some crossover in categories but the rule of thumb is to look over the knives entered in each category and then enter your knife in the category in which you think it has the best chance to win (as long as it fits the category).

SECURITY: A guard will be present at all times in room #104 to watch your knives.

KNIFE PICK-UP: An announcement will be made for you to pick up your knives when the judging is completed.  Winners will be announced before the close of the show Friday evening.

 

            GOOD LUCK!           

Inspired By William Scagel? These Knives Were

Inspired by pieces designed and made by BLADE Magazine Cutlery Hall-of-Fame® member Bill Scagel, the grandfather of the custom knife industry, the Scagel Knives brand includes a line of production/factory knives in the style of Scagel. This superior style of knife design can be seen in this fantastic Sambar Stag Hunter.

The specifications of this outstanding knife:

  • Overall Length: 10.125″
  • Blade Length: 5.5 Inches
  • Blade Steel: A-2 @ 58rc
  • Blade Thickness: .217 Inch
  • Weight: 7.5 oz
  • Convex Ground

To get your Scagel-style hunter, go to: http://www.shopblade.com/scagel-knives-hunter-sambar-stag-u1216?lid=bljkbl060612

Others in the line include a Scagel Knives “Medium Bowie” and “Medium Hunter – O Style.”

2 Days To The BLADE Show: The Pit

Only two more days to the BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta, which, in addition to the world’s greatest knives and more of them than any other knife show, is your chance to party down with the knife industry in The Pit.

    The sunken lounge in the show’s host hotel, the Renaissance Waverly, The Pit has been the scene of many an after-show-hours impromptu party, introductory meeting, and just a chance to put your feet up and talk knives with your friends over a cold beverage in a relaxed atmosphere.

    There’s no telling who you may meet in The Pit, from the legends of the industry to the latest up-and-coming knifemakers to BLADE® Magazine field editors such as Ed Fowler (in cowboy hat seated on the wall at bottom left of the above picture).

    Just about anything can happen in The Pit and usually does. It is where knife collaboration deals between manufacturers and custom knifemakers have been made, unusual events occur–one year a company official who won a Blade Magazine Knife Of The Year Award earlier in the evening lost his award trophy in The Pit, only to have it returned to him later–revelry extends into the wee hours, and much more.

    We hope to see you there—and be sure you have a designated driver to take you home if need be.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

3 Days To The BLADE Show: The Legends of Knives

In three days, the world of knives will be condensed into the planet’s most important knife event: the 31st Annual BLADE Show (www.blademag.com) June 8-10 at the Cobb Galleria Centre in Atlanta. In addition to mankind’s finest cutlery, the legends of the knife industry will descend on the show, and this will be your chance to meet them up close and personal.

    Such Blade Magazine Cutlery Hall-Of-Fame© members as Gil Hibben (table 5J and shown in his shop above working on one of his Paul Ehlers fantasy knife designs [Mike Carter photo]); A.G. Russell (booth 96); B.R. Hughes (the ABS section); Bruce Voyles (table 1V); Houston Price (table 23M and/or the ABS section); Bill Adams (table 7V); Ron Lake (booth 43); Sal Glesser (booth 20); D’Alton Holder (table 1M); and Ken Onion (booth 28) will be on hand to talk with you about your favorite subject, and show you their best examples of same. Other Hall-Of-Fame members that may or may not be attending are Pete Gerber, Chuck Buck (booth 12) and Ken Warner. Paul Bos will not be attending but said he will next year if all goes according to plan.

    In addition to these living legends will be most of the world’s top custom knifemakers, knife manufacturers, sheath makers, sharpener companies, knifemaking supplies, materials and equipment, swords, tomahawks, knife collections, knife seminars, and any and all knife accessory companies and other companies with knife-related items.

    And you too, of course.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

4 Days to the BLADE Show: Knives From All But One Continent

We’re down to only four days before the world’s largest knife event, the 31st Annual BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta, your best annual chance to see knives such as South African Bertie Rietveld’s (www.rietveldknives.com) folder (above) from every continent but Antarctica.

   

    Exhibitors from at least 20 countries will display their knives and knife-related items at the show, including those from Australia, Belgium, Brazil, Cambodia, Canada, China, Denmark, England, France, Germany, Italy, Japan, the Netherlands, Pakistan, Russia, Slovakia, South Africa, Spain, Sweden and the United States.

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Hot Bluing Video

0

Hot bluing process

5 Days to the BLADE Show: What To Look For In a Tactical Folder

It’s five days and counting to the 31st Annual BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta, where purveyor Les Robertson will tell you what to look for in a tactical folder in his special seminar. An example of one of the hottest tactical folders going is shown above—the Mini-DH Hawkbill by Sniper Bladeworks (www.sniperbladeworks.com).

    An Army veteran and long-time purveyor of tactical folders and handforged knives, among others, Robertson will conduct his seminar on show Saturday at 12 p.m. in Room 104. Join him as he outlines not only what to look for in the features of the knives but also what to look for in terms of trends, pricing, the makers and much more.

    The seminar is but one of many that will take place during the event, including those conducted as part of the Survival+Tactical Gear Expo held in conjunction with the show. BLADE Show ticket holders can attend the seminars free of charge.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement