Home Authors Posts by Steve Shackleford

Steve Shackleford

Some Carry-On Pocketknives Will Be Allowed

TSA Knives Allowed

Update: Click here to download the official PDF from the TSA outlining approved knives.

For the first time since the 9/11 terrorist attacks, passengers on U.S. airline flights will be allowed to have some small carry-on pocketknives by the U.S. Transportation Security Administration (TSA).

The change reportedly will go into effect April 25.

Knives with “retractable blades” under 2.36 inches and narrower than 1/2 inch at the widest point will be allowed, TSA Administrator John Pistole said. However, some knives will remain prohibited, including those with “locking blades” and/or molded handles. Exactly what “molded handles” pertained to in terms of knives is unclear at this time, though handles with finger grooves and otherwise contoured for an enhanced grip appear to be targeted. Box cutters and razor blades will continue to be banned.

As a result of the knives that remain prohibited, it appears that “small pocketknives” would be those within the aforementioned blade and lock constraints with uncontoured handles such as traditional Swiss Army knives, keychain knives, utility/scout pocketknives with can openers, screwdriver blades, etc., and “champagne patterns”—wine/bottle-opening knives with corkscrews. However, it is difficult to find a utility/scout pocketknife with a blade that is less than 2.36 inches long and 1/2-inch wide. As a result, it would appear that only such knives as the Victorinox Swiss Army Classic and other similar pieces will pass muster.

Meanwhile, overseas passengers will not have to check their applicable knives when traveling through the USA.

For the latest on knives, stay on www.blademag.com.

World’s Top Knives at ECCKS March 1-3

Some of the world’s top knives and knifemakers will descend on Jersey City, New Jersey, March 1-3 for the 24th Annual East Coast Custom Knife Show (ECCKS).

 

Ron Lake's stag interframe tab-lock folder. (Dave Ellis photo)
Ron Lake’s stag interframe tab-lock folder. (Dave Ellis photo)

Such makers as, in alphabetical order, Van Barnett, Todd Begg, Charles Bennica, Tim Britton, Joel Chamblin, Pat and Wes Crawford, Dellana, Bob Dozier, Allen Elishewitz, Kaj Embretsen, Emmanuel Esposito, Larry Fuegen, Koji Hara, Rick Hinderer, Steve Johnson, Joe Kious, Blade Magazine Cutlery Hall-Of-Fame© member Ron Lake, Kirby Lambert, Wolfgang Loerchner, R.J. Martin, Jody Muller, Warren Osborne, T.R. Overeynder, W.D. Pease, Darrel Ralph, Steve Rapp, Bill Ruple, John W. Smith, Jurgen Steinau, Strider Knives, BLADE® Magazine Field Editor Joe Szilaski, Bob Terzuola, Brian Tighe, Cutlery Hall-Of-Famer Michael Walker, John Young and many more will exhibit, as well as top purveyors and suppliers.

 

For more info click on http://fiftyfiftyproductions.net/eccks-info.php

Alaska Pro-Knife Bill Vote Today—Contact Now!

According to Knife Rights, the Alaska House will vote today on House Bill 33 which, if passed, would ensure one-hand and assisted-opening knives are not considered gravity or switchblade knives. If you live, work or travel in Alaska, please contact your representative(s) and ask them to vote in support of HB33.

Yesterday, Knife Rights Director of Legislative Affairs Todd Rathner testified at a hearing of the Alaska House Judiciary Committee on HB33 “Definitions of Gravity Knives and Switchblades,” referred to by primary sponsor Rep. Mark Neuman as the “Knife Rights Bill.”  The bill also includes Knife Rights’ requested Knife Law Preemption. HB33 advanced out of committee without dissent and now goes to the full House for a vote.

House Speaker Mike Chenault and Rep. Max Gruenberg co-sponsored HB33. The bill is nearly identical  to last year’s HB55, which was passed by the House but was not heard in the Senate. “With changes to the Senate after the 2012 election, we are anticipating better luck in affecting change in Alaska’s knife laws this time around,” Knife Rights reported.

Preemption ensures citizens can expect consistent enforcement of knife laws everywhere in a state. Preemption prevents the creation of or eliminates a patchwork of local ordinances and laws more restrictive than state law, which serves to confuse or entrap those traveling within or through the state.

When contacting the representative, all that is necessary is to simply ask him/her to vote in favor of HB33. Keep it short and to the point.

For more information visit www.kniferights.org.

Tennessee Knife Rights Bill to Senate Vote—Contact Today!

Knife Rights reports that Tennessee Senate Bill SB1015, which would enact the state’s Knife Law Preemption, repeal Tennessee’s antiquated ban on automatic knives (switchblades) and repeal the the state’s 4-inch knife length limitation, has been voted out of committee with a 7-1 vote of recommendation for passage. Requested by Knife Rights and sponsored by Sen. Mike Bell, the bill now moves to the full Senate.

Preemption ensures citizens can expect consistent enforcement of state knife laws everywhere in a state. Preemption prevents the creation of, or eliminates, a patchwork of local ordinances and laws more restrictive than state law which serve to confuse or entrap those traveling within or through the state. Knife Rights has helped pass similar Knife Preemption Laws in Arizona, Utah, New Hampshire and Georgia and helped repeal knife bans in New Hampshire, Washington and Missouri.

If you live, work or travel in Tennessee, please contact your senator and ask him/her to vote Yes on SB1015.

Whether writing or calling, all that is necessary is to simply ask them to vote in favor of SB1015. Keep it short and to the point.

For more info visit www.KnifeRights.org.

Zac Brown’s Southern Grind Headlines New BLADE®

BL0513CVRDo you know Zac Brown of the Grammy-Award-winning Zac Brown Band owns his own knife company? Find out all about it and much more in the new May BLADE®, on many newsstands NOW!

Based in Atlanta, Brown’s knife company is aptly named Southern Grind and focuses on Brown’s lifelong love affair with knives. Get all the poop on it in the May BLADE.

Also in that issue:

•Wally Hayes shows you how to make a Steampunk tanto (his version of which also happens to be the May issue’s cover knife);

•Industry pros select the top 13 knives of the custom pioneers;

•Six knives tackle the deepest, darkest jungles of the Amazon;

•Industry pros show you how to identify knives with proper fit and finish;

•See which factory knives finished as runners-up in the voting for the Blade Magazine 2012 Knife-Of-The-Year® Awards;

•In part IV of a series, Ed Fowler continues to outline how he installs sheep-horn handles on his custom knives;

•And much more!

Also, act before tomorrow and enjoy 74 percent savings on a BLADE subscription. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=ssfbbl022713 for more info.

Stop New Jersey from Instituting Knife-Free Zones!

New Jersey has a bill pending that would establish “knife-free zones” around schools, parks and “public facilities,” according to Knife Rights.

New Jersey Assembly bill A1387, which would permit municipalities to establish huge swaths of “weapons free zones” around schools, parks and “public facilities” within which possession of “any dangerous knife” would be prohibited, under penalty of fine and imprisonment, was passed by the full Assembly, along with a package of 19 other anti-gun bills, by decidedly partisan votes.  HOWEVER, THIS BILL HAS NOT YET BECOME LAW.

The bill now moves to the NJ Senate, a somewhat more deliberative body where all indications are that there is no desire to steamroll the bill package that passed in the Assembly. A1387 will face brand new scrutiny and a full committee hearing in the Senate, if it is even moved forward there at all. Not all the bills passed by the Assembly Feb. 21 will even get a hearing in the Senate. In any case, Knife Rights officials say chances will be better to remove the “any dangerous knife” language during a hearing process, which was bypassed in the Assembly.

“We will alert you to act if and when the bill begins moving in the Senate process and it is time to write and call NJ’s senators about this insanity,” the Knife Rights report stated.

There are so many issues with this bill, specifically the “dangerous knife” provision, it’s hard to know where to start.

First, there is no definition of “dangerous knife,” a legally vague and ambiguous term that could apply to anything from a Swiss Army Knife to kitchen knives. As such, it will be left entirely up to cops on the street and then courts to determine what is or is not a “dangerous knife.” There is a huge potential for abuse of honest citizens by any cop, prosecutor or judge with an agenda or prejudice, as has been amply demonstrated for the last several years in New York City, which stimulated Knife Rights’ pending Federal Civil Rights lawsuit against the City and DA. The “dangerous knife” provision was added to the bill after a committee hearing last week from the Assembly floor and without any public hearing on the new provision!

The definition of “public facilities” is extremely broad and simply driving down many streets or walking past a park or through or past a public space would put citizens at risk in a state that has virtually defined “unreasonable” in regards to similar existing restrictions on firearms. The knife provision puts tradesmen who use knives for their jobs at risk, along with anyone who carries a common folding knife. It would also turn utility knives in hardware or convenience stores into illegal contraband if the stores are within the “weapon free” zones.

As but one example, were this legislation to pass and a “weapons free zone” be enacted by Jersey City, New Jersey, which is likely considering the Mayor’s extreme anti-weapon sentiment, anyone attending or exhibiting at the East Coast Custom Knife Show or New York Custom Knife Show in Jersey City could be subject to arrest at numerous points in their journey. It is virtually impossible to get to the shows’ hotel without encroaching on one or more of the proposed “weapons free zones.” (The irony is that these shows moved out of New York City to New Jersey to escape persecution by the anti-knife District Attorney, Cyrus Vance, Jr.)

Finally, as with all such laws, the potential impact on crime is to actually increase the risk to law-abiding citizens within these “weapons free zones” without any positive impact on school or public safety. These gun or weapon free zones simply create a victim-rich location where it is advertised to criminals and madmen that their victims will be unarmed and defenseless.

For more info click on http://www.kniferights.org/index.php?option=com_content&task=view&id=218&Itemid=1

Arkansas Custom Knife Show Feb. 16-17

The 18th Annual Arkansas Custom Knife Show will showcase some of the world’s best bladesmiths and knifemakers Feb. 16-17 at the Robinson Center Exhibit Hall in Little Rock, Arkansas.

Ray Kirk will give away his NDN model at the show.
Ray Kirk will give away his NDN model at the show.

The proceedings will kick off with a special cutting competition on Feb. 15, followed on Saturday and Sunday with a 100-table show that will include 28 American Bladesmith Society master smiths, knifemaking supplies, leather products and knife-related books, and more. The cutting competition will be held on the Log House grounds of the Historic Arkansas Museum on 2nd and Cumberland Streets. Admission to the competition is free.

Show hours are 10 a.m.-5 p.m. Saturday and 10 a.m.-3 p.m. on Sunday. Admission is $10 for a two-day pass.

Door prizes will be given hourly. Awards will be presented for the best Hunter, Fighter, Folder, Bowie, Damascus, Miniature, Camp knife, Art knife, Bird and Trout, and Pearl handle. Awards also will be given for best sheath, best historically inspired knife and best of show. Knives can be bid on during a silent auction both days. Four handmade knives will be given away Sunday afternoon. Ray Kirk will be giving away his NDN model among them.

The Robinson Center Exhibit Hall located at Markham and Broadway Streets in downtown Little Rock.

For more information click on www.arkansasknifemakers.com.

 

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement