Home Authors Posts by Steve Shackleford

Steve Shackleford

Today’s Troop Knife Favorites

Before you can answer the question of what the most popular knives are among the U.S. military in Afghanistan, you must first answer such questions as: What are the knives used for? Which knives do the job and are the best buys for the money? Which knives are most available? There are other questions, but these are good starting points.

According to those interviewed, knives are used mostly for cutting boxes, tape, rope and 550 cord, small-gauge metal wire, prying things open, cutting the clothes of fellow soldiers to administer to wounds, and so on. “[I used a knife in combat] the last time I was deployed, but to cut open mortar ‘tootsie-roll’ cartridge carriers, not to disembowel the enemy,” one soldier observed. “The occasions where a knife is used to directly defend against or attack the enemy are notable in that they are the exception instead of the rule.”

“[Knives] are used literally every mission for combat-related tasks such as prepping vehicles, aircraft, fighting positions, flex cuffs, etc.,” one veteran said. Meanwhile, though it is not exactly a common occurrence, Curtis Iovito of Spartan Blades indicated knives are used in hand-to-hand combat more in Afghanistan than you might think.

Visit the Spartan Blades website to check out knives designed for military purposes.

Knifemaker Paul Fox Dies

Jesse Paul Fox Jr., long-time knifemaker known for his electric-motor-driven folder and winning the W.W. Cronk Award, died Nov. 19. He was 74.

Known to most by his middle name of Paul, Fox was a long-time member of the Knifemakers’ Guild and owner of Pioneer Woodcarving. As Fox’s friend and fellow maker Tim Britton noted on The Knife Network, “Paul may have been one of the most creative knifemakers of all time. He was perhaps best known for his electric-motor-driven folder and a series of very fancy knives that were a lot like sculpture. He won the W.W. Cronk Award at the Knifemakers’ Guild shows till they asked him to stop entering and let someone else win.

“Paul is the only maker I know who experimented with his own YAG laser and a trailing-wire EDM machine. The industry will miss him and so will his many friends throughout ‘knifedom.’ Paul and his wife Martha would appreciate our kind thoughts and prayers.”

According to Britton, Fox had a great sense of humor. “Paul had a Chevy Suburban that he bought at a North Carolina State Surplus auction for $700,” Tim recalled. “It was ugly, yellow and very beat up.  He took it to Hendricks Motors of NASCAR fame and had them put a full race motor in it.  Damned thing would fly and Paul loved nothing better than challenging redneck racers and usually beating them. Guess you have fugured out by now, that dude was a character!

“Paul was very much at home with locals—guys from the garage, bread-truck drivers, etc. He was one of a kind, like so many of us in knifemaking. I can still see Paul using the remote control boat to chase geese off his pond!”

A private service will be held at a later date. In lieu of flowers, memorials may be sent to Catawba Regional Hospice 3975 Robinson Rd. Newton, NC 28658. Bass-Smith Funeral Home is handling the services.

Vacation Knives: Multi-Tool For Emergency Repairs

 

A hot multi-tool with a selection of sharp blades in plain and serrated edges, assorted tools such as a spring-loaded pliers, flat-head and Phillips screwdrivers, a saw, scissors, can-opener and more—what else would you need to fend off an emergency repair job while on the road? The Gerber Suspension Multi-Tool has it all, plus one-hand opening and the company’s Saf.T.Plus locking system—all for our nifty price of $34.99.

 

For more info click on http://www.shopblade.com/gerber-suspension-multi-tool-y6989/?lid=blss081512

Navy SEAL’s Super Bolo!

Nearly 20 years later and with my original bolo in disrepair, I thought it time to replace it with an updated and more technologically sophisticated design. My goal was to find a knifemaker from my home state of Kentucky who would be capable and willing to collaborate on the project. It was not long before several members of the Knifemakers’ Guild recommended Gene Baskett. A Guild member since 1981, Gene has proved to be one of Kentucky’s finest custom knifemakers and has earned the respect of his peers for the quality work he produces.

He and I based the knife’s design on the old bolo I had used when I served in the SEALs. Our decision was to go with CPM-154 stainless steel, and Gene made several blade adjustments. We experimented with a rubber handle made from extremely durable horse matting material—a perfect Bluegrass State touch, and a substance also favored by a number of makers and contestants in the cutting competitions. The resulting grip is firm yet shock absorbing. The handle can also be securely grasped when wet. My concerns were simple: durability and performance. I wanted a knife that would withstand a heavy amount of punishment and still perform well.

Both Gene and I agree that the knife has exceeded our expectations. Its cutting ability is just plain scary. Without honing the original edge applied by Gene, I put the knife to the test. He already had whacked through 1-inch saplings, and still the blade was gliding through blades of grass and straw. My test consisted of saplings, 1-inch tree branches and wild grape vines. All were easily severed with one clean hit.

After 20-to-30 strikes on branches and vines, I moved on to a grass mat wrap 4 inches in diameter. The grass mat was wrapped tightly around a 1-inch piece of dried bamboo. One diagonal strike went completely through. I finished the test with a piece of quarter-inch tanned cowhide. With only slight pressure, the bolo sank through the hide from tip to handle. Drawing the blade out and away left a clean, effortless cut through 8 inches of hide. The blade was still quite sharp afterward.—BY STEVE WATKINS, retired Navy SEAL

For the complete story on the author’s super bolo, you can get the digital version of the December BLADE® by clicking on http://www.shopblade.com/blade-dec-2012-digital-issue?lid=SSfbbl101612

PICTURE CAPTIONS, FROM TOP

TOP: At top is the author’s old bolo and leather sheath and below it is Gene Baskett’s Super Bolo and Kydex® sheath. (photo courtesy of Steve Watkins)

MIDDLE: One of the instructors near the author’s duty station in the Philippines circa 1990 splits wood with the author’s old bolo. (photo courtesy of Steve Watkins)

BOTTOM: The author (right) and his friend, Brad O’Neill, on patrol circa 1990. The author is shown holding an M-60 (7.62mm) and his friend an M-16 with an M-203 (a 40mm grenade launcher). (photo courtesy of Steve Watkins)

SGT. DAKOTA MEYER’S KNIFE

In recognition of his military actions in Afghanistan on behalf of his fellow servicemen and his country that resulted in his receiving the Congressional Medal of Honor, U.S. Army Sgt. Dakota Meyer was presented with a custom knife made by Gene Baskett, a custom AR-15 rifle, and honorary membership in the Knifemakers’ Guild.

    During a special ceremony this past December in Elizabethtown, Kentucky, Baskett, formerly of Elizabethtown and now of Eastview, Kentucky, presented Sgt. Meyer with a Baskett handmade knife, a custom fighter with a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side and “8 September 2009, Kunar Province Afghanistan” on the flip side. The engraving is by Patrick Clark of Clark Jewelers, also of Elizabethtown. Richardson Gunsmithing did the Moly Coating.

    In all, Baskett said he got to spend about three hours with Sgt. Meyer the day of the presentations. “He really loved the knife,” Baskett observed. “He was really appreciative and seemed very humbled by it all.”

    J.J. Akins and Steve Sprowls of Elizabethtown’s Sporter Express gun shop presented Sgt. Meyer with the custom-engraved rifle. The gun is engraved “Rifle presented by the citizens of Hardin County, KY. Sergeant Dakota Meyer, USMC. 8 September 2009. Kunar Province Afghanistan. Congressional Medal of Honor,” and was donated by Sporter Express.

    A member of the Guild’s board of directors, Baskett also presented Sgt. Meyer with a custom Guild honorary membership badge that includes the worlds “Medal of Honor Recipient” and the Marine Corps emblem.

ACTS OF HEROISM

Sgt. Meyer was born and raised in Columbia, Kentucky. He entered the Marine Corps after high school in 2006. On Sept. 8, 2009, Sgt. Meyer, then a corporal, was credited with numerous acts of heroism and saving the lives of several Marines in a battle near the village of Ganjgal in Afghanistan (see sidebar, page ???). As a result, Meyer was awarded the Medal of Honor in a ceremony at the White House on Sept. 15, 2011.

    Sgt. Meyer spoke to a small crowd and the media during the ceremony in Elizabethtown, saying he does not consider himself a hero and that the Medal of Honor and what it represents is much bigger than him. His actions on “the worst day of my life” may have saved several fellow Marines, though he said he could not save four of his close friends in his unit. He wears a bracelet bearing their names.

    The Americans who died in the ambush were: 1st Lt. Michael Johnson, 25, Virginia Beach, Virginia; Staff Sgt. Aaron Kenefick, 30, Roswell, Georgia; Hospital Corpsman Third Class James R. Layton, 22, Riverbank, California; and Gunnery Sergeant Edwin Wayne Johnson Jr., 31, Columbus, Georgia. A fifth soldier, Army Sgt. 1st Class Kenneth W. Westbrook, 41, Shiprock, New Mexico, later died from his wounds.

    Sgt. Meyer received the Medal of Honor in a ceremony at the White House on Sept. 15, 2011. When a White House staffer contacted him to arrange the ceremony, Sgt. Meyer famously asked to “have a beer with the President.” Sgt. Meyer received an invitation to the White House the afternoon before the ceremony (see sidebar, page ???). He also requested that when he was honored, simultaneous services should be held at other applicable locations to honor the memory of his fellow service members who died or were mortally wounded during the ambush and his rescue attempts.

    Sgt. Meyer is the third living recipient of the Medal of Honor since the Vietnam War, and the first living Marine in 38 years to be so honored. In addition to the Medal of Honor, he also received the Purple Heart, Navy Commendation Medal w/Combat V, the Navy Achievement Medal and the Combat Action Ribbon during his years of service from 2006-2010.

MILLION DOLLAR CHALLENGE

Sgt. Meyer uses his fame to raise money to provide college scholarships to the childen of those soldiers who did not survive the war. His goal is to raise $1 million for his “Million Dollar Challenge” (see sidebar, page ???). During the presentation ceremony, Sporter Express presented a check for $750 toward that goal.—BY MIKE CARTER

For more information on the Million Dollar Challenge, visit www.dakotameyer.com. For more on Gene Baskett knives, contact Gene Baskett, Dept. BL12, 427 Sutzer Ck. Rd., Eastview, KY 42732 270-862-5019 www.baskettknives.com.

To stay abreast of the latest in knives and knife information, subscribe to BLADE® at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101212

Keeping Up With Dakota Meyer

It is not often a living U.S. Marine receives the Congressional Medal of Honor, and Sgt. Dakota Meyer is the first one to do so in 38 years. Neither is he one to rest on his laurels.

    For instance, he has partnered with the Marine Corps Scholarship Foundation (MCSF) to raise money so the children of Marines can attend college. Sgt. Meyer said he realizes the importance of education and believes in the MCSF motto, “Honoring Marines by Educating Their Children.” The Dakota Meyer Scholarship Initiative was established and Sgt. Meyer committed to personally raising a million dollars to fund the effort. In fact, during the MCSF’s 50th anniversary celebration this past spring, it was announced that he had successfully reached his goal of raising a million dollars. The Challenge to America to match the million dollars Sgt. Meyer raised is ongoing. To learn more about it and to make a donation visit www.dakotameyer.com

    He indicated he was honored President Obama accepted his invitation to have a beer the afternoon before the Medal of Honor ceremony. (As a side note, Sgt. Meyer said the White House brews its own beer, a honey ale, which he said both he and the president enjoyed.) He added he appreciated the opportunity to speak with and ask advice from the president. The president emphasized the importance of education, a priority Sgt. Meyer shares. In fact, Sgt. Meyer said he hopes to continue his education when his travel schedule slows down.

    Meanwhile, he spends much of his time on the road, traveling all over America to share the story of his fallen brothers. He also advocates for veterans and has recently partnered with the U.S. Chamber of Commerce and Toyota on the Hiring Our Heroes campaign, which provides jobs fairs for veterans nationwide, as well as training veterans to successfully make the transition from military to civilian employment. At press time, Sgt. Meyer’s book Into the Fire was slated to be published this September.

Above and Beyond The Call

 According to Dakota Meyer’s citation for the Medal of Honor, he was recognized, “For conspicuous gallantry and intrepidity at the repeated risk of his life above and beyond the call of duty as a member of Marine Embedded Training Team 2-8, Regional Corps Advisory Command 3-7, in Kunar Province, Afghanistan, on 8 September 2009.

    “When the forward element of his combat team began to be hit by intense fire from roughly 50 Taliban insurgents dug in and concealed on the slopes above Ganjgal village, [then] Corporal Meyer mounted a gun-truck, enlisted a fellow Marine to drive, and raced to attack the ambushers and aid the trapped Marines and Afghan soldiers. During a six-hour firefight, Corporal Meyer single-handedly turned the tide of the battle, saved 36 Marines and soldiers and recovered the bodies of his fallen brothers.

    “Four separate times he fought the kilometer up into the heart of a deadly U-shaped ambush. During the fight he killed at least eight Taliban, personally evacuated 12 friendly wounded, and provided cover for another 24 Marines and soldiers to escape likely death at the hands of a numerically superior and determined foe.

    “On his first foray his lone vehicle drew machine gun, mortar, rocket grenade and small arms fire while he rescued five wounded soldiers. His second attack disrupted the enemy’s ambush and he evacuated four more wounded Marines. Switching to another gun-truck because his was too damaged, they again sped in for a third time, and as turret gunner he killed several Taliban attackers at point blank range and suppressed enemy fire so 24 Marines and soldiers could break out.

    “Despite being wounded, he made a fourth attack with three others to search for missing team members. Nearly surrounded and under heavy fire, he dismounted the vehicle and searched house-to-house to recover the bodies of his fallen team members. By his extraordinary heroism, presence of mind amidst chaos and death, and unselfish devotion to his comrades in the face of great danger, Corporal Meyer reflected great credit upon himself and upheld the highest traditions of the Marine Corps and the United States Naval Service.”

 

TOP PHOTO AND SECOND PHOTO FROM TOP

Congressional Medal-of-Honor recipient Sgt. Dakota L. Meyer recently was presented with a Gene Baskett handmade knife. The custom fighter has a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side. The engraving is by Patrick Clark. Richardson Gunsmithing did the Moly Coat. (photo of Sgt. Meyer courtesy of the United States Marine Corps; knife photo by Mike Carter)

 

Hunter’s Edge: 3 EZ-Carry Field Hones

    Keeping your hunting knife sharp at all times is a must in the field. One of the best ways to do it is to touch the edge up after each time you use it—and the easiest way to do that is with a portable field sharpener.

The Spyderco ProFile Fine/Medium Sharpener (pictured at top) offers a medium-grit stone for very dull edges and a fine-grit stone for edge finishing and/or touch-ups. A convenient pocket carry leather case is included. For more, click on www.shopblade.com/profile-finemedium-w8595?lid=SSfbbl101112

The GATCO Diamond Stix Sharpener (second from top) features a solid brass knurled handle for easy gripping and which contains a monochrystalline diamond rod that sharpens serrated blades as well as hunting knives, shears and more. For more, click on www.shopblade.com/gatco-diamond-stix-sharpener-50ds1?lid=SSfbbl101112

The GATCO Edgemate Carbide Pocket Sharpener (bottom) is designed to sharpen your hunting knife in four to five gentle strokes via its long-lasting tungsten-carbide replaceable blades. For more, click on www.shopblade.com/gatco-edgemate-carbide-pocket-sharpener-40001?lid=SSfbbl101112

 

Veteran Knifemaker Ted Dowell Passes Away

 

Ted Dowell, long-time knifemaker, past Knifemakers’ Guild president and popularizer of the integral knife design, passed away Oct. 5.

    In a statement, Blade Magazine Cutlery Hall-Of-Fame© member and current Guild president Gil Hibben noted, “It is with a heavy heart that I report the passing of my friend and Knifemakers’ Guild Founding Member and Past President, Ted Dowell. Our hearts go out to his family and especially to his beloved wife, Betty. As soon as I know the arrangements and details I will post them. Ted was a true pioneer of the KMG and a great master knifemaker. He will be deeply missed.

   Also known for his “Funny Folder” design, among many others, Dowell was the only Guild member to exhibit at every Guild Show—40 in all—until the streak came to an end in 2010, Betty always by his side, smiling and flying the “Dowell banner.”

    According to Hibben, the family of Ted Dowell has requested that in lieu of flowers, a donation be made to the Knifemakers’ Guild (www.knifemakersguild.com) in Ted’s memory. “Ted truly loved the Guild, and the Dowell family’s request reflects that love,” Hibben added.

    To stay abreast of the latest in knives and knife information, subscribe to BLADE at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101012

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement