The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

New BLADE On Newsstands Now!

The new BLADE showcases the hottest knives of the SHOT Show—including the new Kershaw/Emerson CQC-6K on the cover—the inside scoop on knife lotteries, field tests of the latest skeleton knives and more.

June BLADE hits newsstands today!
Check out the June BLADE, on newsstands today!

Held this past January at the Sands Expo Center in Las Vegas, the SHOT Show is the annual coming out party for the latest in knives, guns, deer stands, sharpeners and everything that has to do with shooting and hunting. The movers and shakers of the cutlery industry were there to present the newest in tactical, outdoor, kitchen, sporting, bushcraft and just about any knife you can think of. BLADE was there to scope it all out and you can be too in the pages of the June issue.

Knife lotteries are one of the hottest tickets in the industry. Knife enthusiasts who normally can’t even sniff buying the knives of some of today’s hottest makers due to long waiting lists have an equal chance at the makers’ new knives through the lotteries. But are the lotteries really all they’re cracked up to be? Find out the good and the bad of an industry juggernaut in the new BLADE.

Bare-bone cutters, skeleton knives are cool tools that offer a minimalist approach to design but maximum cutting output for blades their size. Find out how some of the newest models perform in this issue.

The Buck 110 is one of the icons of the knife industry and this year celebrates its 50th anniversary. Get the lowdown on the history of the famous folding hunter and all the various sweepstakes surrounding the knife’s golden anniversary in the new BLADE.

Open through June 22, “A Sure Defense: The Bowie Knife In America” is a celebration of perhaps the world’s most famous American knife. Held at the Historic Arkansas Museum in Little Rock, the exhibit features some of the world’s oldest and most valuable antique bowies from the 19th century. Read all about it this issue.

To subscribe to the digital edition of BLADE, visit

http://www.shopblade.com/blade-1-yr-digital-subscription. 

To subscribe to the print edition, visit

http://www.shopblade.com/blade-magazine-one-year-subscription-u-s

For the latest knives, knife trends, news and more, stay tuned to www.blademag.com.

11-11-11: Here’s To U.S. Service Personnel Everywhere

Blademag.com, BLADE® magazine and everyone at F+W Media and Krause Publications would like to take this opportunity to thank all American service personnel and veterans for their service to their country.

It goes without saying that without the sacrifices they have made and continue to make, we would not have the privilege of living in the greatest country the world has ever seen. However, we can never say it enough.

Thank you active duty personnel and veterans everywhere!

Washington Bill Attempts to Restrict Blade Length

0

From Knife Rights:

A Washington state representative has introduced a bill amending Washington law to outlaw concealed carry of knives with blades longer than 3 1/2 inches. While Arizona, New Hampshire and other states are making progress in the personal choices law abiding citizens make regarding the type of knives they carry, Rep. Sherry Appleton (D – LD23) is looking to set her state’s knife laws back decades.

Rep. Appleton bill would mean that the average fisherman, fishing one of Washington’s many coastal areas or rivers whose jacket falls over their 6-inch filet knife would suddenly be committing a crime. Washington has many hunters and is a popular hunting destination for those who travel to hunt. The average hunting knife is considerably longer than the arbitrary 3 1/2- inch limit, exposing hunters to committing an unintentional crime as well. But, the most egregious aspect of this proposed law will be to render illegal many simple pocket knives that law-abiding citizens carry everyday for work and recreation.

“Why anyone would go back to this 1950’s legislative mentality is beyond me,” said Doug Ritter, Chairman of Knife Rights. “While many states are modernizing or eliminating restrictive laws coving the essential tools millions of Americans carry for everyday chores, we now have a legislator in Washington State who thinks it’s a good idea to go backwards.”

Read the proposed bill: http://bit.ly/fCACxE

Good News On Knife Legislation Front

The American Knife & Tool Institute reports that right now some very good things are happening on the knife legislation front. If you live in one of the following states, take action to let your representatives know they should support these knife-friendly bills.

 

Alaska –  State Representative Mark Neuman introduced bill H 55 to Section 1. AS 11.81.900(b) to change Alaska’s definitions of gravity knife and switchblade to incorporate AKTI’s bias toward closure language successfully used in California, Texas, and in amending the 1958 Federal Switchblade Act in 2009.  The bill would add to the description of both gravity knife and switchblade knife that “does not include a knife that has a spring, detent, or other mechanism designed to create a bias toward closure that requires a person to apply exertion to the blade by hand, wrist, or arm to overcome the bias toward closure and open or release the blade.” This bill is currently in the House Judiciary Committee.  Alaska residents  – Please encourage your representatives to move this bill along and approve it.

Iowa – HSB 219 is a provision to change Iowa’s weapon law to reflect intent.  The bill eliminates current law that provides that a person, who is not involved in the commission of a crime, who goes armed with a knife concealed on the person, commits either an aggravated misdemeanor if the knife has a blade exceeding eight inches or a serious misdemeanor if the knife has a blade between five and eight inches. This bill was introduced by Chairman Sands of the Iowa House Ways and Means Committee and is the right step to making crime not based on the possession of a knife, but on the intent of the criminal. Let your representatives know this is a positive bill and you want their yes vote. 

New Hampshire – Rep. Jenn Coffey’s HB 544 bill passed the NH House on March 15th and success in the NH Senate would mean that knives are added to the list of firearms, ammunition, etc. that only the state has authority over.  Cities and counties would not be able to make more restrictive laws than the State of New Hampshire – which has no knife law! AKTI applauds her efforts on behalf of citizens of New Hampshire and encourages them to write their state senators to support passage of this bill.

Utah – On March 23, Utah Govenor Herbert signed into law H 271 that reserves to the state the authority to regulate knives and prohibits a municipaltiy, county or a local district from enacting any ordinance or criminal penalty greater than state regulations or penalties.  Utah residents can now travel throughout their state without concern of violating an unknown local law.

Knives of Alaska Launches New Website

0

We just launched our new website and the feedback has been outstanding! The new site features clear navigation, easy access to important information, and loads of beautiful knife photos. You can also share your hunting or knife stories with us on Facebook and have your story featured on the new site. Be sure to check it out and let us know what you think.

www.knivesofalaska.com

Take A National Knife Museum Tour

Take a couple of minutes out of your busy schedule to relax and participate in a spectacular tour of the National Knife Museum housed in Smoky Mountain Knife Works. It’s a well-done, albeit homemade, video set to a couple of catchy tunes, and will definitely renew your energy and give you a fresh outlook on life, whether it’s to start or end your day. Enjoy! http://www.youtube.com/watch?v=ehSTQ03_ICE

Guadalupe Hammer-In/Rendezvous Sets Class Schedule

A diverse slate of knifemaking classes and instructors will highlight the Guadalupe Forge Fall Hammer-In & Knifemaker’s Rendezvous Sept. 24-25 in sunny New Braunfels, Texas.

 

Coordinated by knifemaker Johnny Stout and bladesmith Harvey Dean, the event will include the following instructors and classes:

•Bladesmith J.W Randall: Mosaic Damascus Patterning, Basic Blade Forging, Forging, and Patterning Damascus;

•Knifemaker Enrique Pena: Slip-Joint Folder Design, Using Bushings in Slip Joints, Lockback Folders, and Milling Sideplates For Slip Joints;

•Engraver Alice Carter: Basic Scroll Design, Background Removal, and Shading Specifics;

•Bladesmith Harvey Dean: Mortise Handle Construction and Basic Filework;

•Knifemaker Johnny Stout: Hollow Grinding and Flat Grinding.

Other classes may be added based on the needs of the students.

For more information contact Johnny Stout 830-606-4067 [email protected] or Harvey Dean 512-446-3111 [email protected].

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement