Three unique sheepsfoot blades for top pocket performance.

A sheepsfoot blade hides its edge behind a quiet profile. It slices clean and never wanders. These three nowhere-near-a-kind blades remind you why the shape keeps earning loyal fans.

Sheepsfoot Advantage

A sheepsfoot blade shape delivers straight, predictable cuts without risk of a piercing tip. The sheepsfoot blade gets its name from its shape, which resembles a sheep’s hoof. The edge runs flat so the user can push through rope, cardboard and fabric with complete control. The dropped, rounded nose keeps the point out of the work, which helps during rescue tasks and close-quarters cutting. The shape shines in utility roles, but it trades away penetration and fine-tip detail work. Users who need a safe, steady cutter reach for a sheepsfoot. Users who need a sharp, probing point usually look elsewhere.

Reiff Knives Circadia

Reiff Knives built its reputation on hard-use tools designed for people who work and live outdoors. The Circadian Sheepsfoot fits that mission cleanly. Reiff Knives is a family run and veteran-owned company, and it’s carved out a niche by blending modern steels with field-driven ergonomics. Its knives aren’t showpieces—they’re workhorses built to survive real use in the backcountry, the shop or the boat. The Circadian line has been one of the company’s best sellers, and the sheepsfoot variant pushes the platform into pure utility.

The Circadian Sheepsfoot features a compact EDC profile, measuring roughly 7 inches in overall length, depending on the sheath and scale configuration. The blade measures about 3 inches and is cut from CPM MagnaCut, a steel chosen for its balance of toughness, edge retention and corrosion resistance—a smart match for a knife meant to live outdoors. Reiff offers the blade in stonewash or black DLC, both finishes built for durability and low glare. The 90-degree spine is sharp enough to spark from a ferro rod, adding value for fieldcraft.

Handle scales are available in canvas Micarta, colored black or green depending on the model. The geometry favors control: a deep index cut, a neutral mid-section and a palm swell that locks the hand without forcing a grip. It’s a compact knife that still feels anchored during push cuts, rope work and fine carving.

Reiff pairs the Circadian Sheepsfoot with a Kydex sheath, sold in multiple colors and patterns, including black, OD green and multicam. Reiff designed the sheath for belt or pack-strap carry with enough retention for active movement. It’s an EDC fixed blade—small enough for daily tasks and tough enough for field abuse.

Circadian Sheepsfoot Specs
Overall Length: 7.25”
Blade Length: 3.28”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Stonewash
Weight: 4.10 oz.
Scales: OD Green Canvas Micarta
Sheath: Ambidextrous Universal Kydex with Tek-Lok
Made in the U.S.A.
MSRP: $285

Circadian Performance

Even though these three knives are in the EDC realm, the Circadian Sheepsfoot feels like the big brother. I have to give comfort and solidness to it. The knife has the heft to baton wood for the dry parts, and the edge geometry to feather wood like an ordained bushcraft knife. On top of that, the 90-degree spine showered sparks on every part, even the jimping.

It acts like a mini santoku knife in the woods, cabin and home kitchen. It performs draw cuts like a champ on food, cardboard, cordage, paper and leather. I made it my woods sheepsfoot blade and relied on it solo and teamed up with a chopper/splitter in the winter months. I touched up the MagnaCut blade once while testing it, and it wasn’t a chore, because I never let it get dull enough to need the sharpening stone.

I added an UltiClip to the sheath, carried it in my utility pocket and called it good!
The Circadian Sheepsfoot delivers reliable cutting performance for those who need a dependable tool that never falters. It’s simple, rugged and purpose-driven—exactly what Reiff Knives promises with every tool they ship!

Bear & Son Culery Large Sheepfoot Barlow

Bear & Son Cutlery operates out of Jacksonville, Alabama, where it machines, grinds, assembles and sharpens every knife under one roof. That full-control approach gives its traditional patterns a level of consistency collectors and working users both appreciate. The Large Sheepfoot Barlow sits squarely in that tradition. It blends a classic American pattern with modern steel choices and multiple handle options, giving the user a pocket tool that feels familiar but performs with modern reliability.

The knife measures 7 inches in overall length and 4 inches closed. Bear & Son fits the frame with a 2.75-inch sheepsfoot blade cut from stainless steel. The second blade mirrors a traditional Barlow layout, providing a backup edge for finer work. The sheepsfoot profile drives straight cuts through rope, cardboard and daily tasks with predictable control. The company shapes the spine with a clean, squared feel, which helps during controlled push cuts and scraping chores.

Handle options include rosewood, Genuine India Stag Bone and white smooth bone. Each material gives the knife a different personality: rosewood for warmth, stag for texture and smooth bone for a classic pocket-worn look. Nickel-silver bolsters anchor the Barlow silhouette and add durability at the pivot.

The knife is a slipjoint, so it stays legal in most jurisdictions and fits the traditional-carry crowd. Bear & Son ships it without a sheath, as expected for a pocket Barlow. The weight lands at 3.7 ounces, which keeps it planted in the pocket without feeling bulky.

2-Blade Barlow Sheepsfoot
Overall Length: 7”
Blade Length: 3”
Closed: 4”
Blade Thickness: 0.90″
Steel: Stainless
Finish: Satin
Weight: 2.9 oz.
Scales: Rosewood, Genuine India Stag Bone, White Smooth Bone
Sheath: None
Made in the U.S.A.
MSRP: $79

Large Sheepfoot Barlow Performance

The Large Sheepfoot Barlow had some weight and an old-timey impression. It made me feel classy when I used it and it sliced like a champ. Its solid feel was substantial, though I took extra care when pulling the blades out. The liners inside the handles were sharp—near paper-cut sharp. But I didn’t draw blood when I opened it. They were just rough to the touch.

Both blades were wicked sharp. The smaller blade had a more awl-like shape and was thick enough to use as one. Or it could be your up-close, carving-in-tight-places blade. Pick your poison. The main blade excels at slicing rope, and the sharp tip makes short work of leather. What surprised me most was how detailed the sheepsfoot was mincing fresh garlic in the kitchen. Naturally, the stainless steel remained worry-free around moisture.

Bear & Son continues to push traditional patterns forward while keeping the work in Alabama. The Large Sheepfoot Barlow reflects that mission: simple mechanics, honest materials and a pattern that earned its place over generations.

Tactile Knife Co. Redhawk

The Redhawk marks Tactile Knife Co.’s push into the compact fixed-blade EDC space, and it carries the same machining pedigree that put the Dallas-based shop on the map. Tactile started as a precision pen company before expanding into knives, but its through-line never changed: tight tolerances, clean lines and American-made materials. Its shop in Texas machines nearly every component in-house, and the company leans hard into heirloom-grade build quality. The Redhawk reflects that ethos—simple, durable and purpose-driven.

Taylor Martin created the Redhawk after years of carrying fixed blades that fell short. It’s a compact knife punching above its size without feeling delicate. It measures just under 7 inches in overall length (6.9 inches OAL) with a 2.75- or 3-inch blade, depending on the variant. The blade, cut from CPM MagnaCut, is a steel chosen for its balance of toughness, edge retention and corrosion resistance. Its reverse tanto/modified sheepsfoot profile gives it a tall cutting surface and a fine, workable tip. Blade stock runs 0.12-inch, keeping it slicey without feeling thin.

Handle scales are made of Micarta and come in multiple colors. Tactile shaped them with a scalloped pinch-grip area for control during fine work and heavy cuts using a chest-lever grip. Finish options include stonewashed, tumbled Cerakote and black Cerakote, depending on the retailer. The spine is ground clean and crisp, suitable for scraping tinder or striking a ferro rod. Tactile doesn’t explicitly market it as a 90-degree spine, but it behaves like one in use.

The knife ships with either a Kydex or leather sheath, both set up for pocket carry with a clip, making it a true EDC fixed blade rather than a belt-only option.

Redhawk Specs
Designer: Taylor Martin
Overall Length: 6.9”
Blade Length: 2.75”
Blade Thickness: 0.120
Steel: CPM-MagnaCut Stainless
Finish: Cerakote (black)
Weight: 3.16 oz.
Scales: 3D Contoured Micarta Handles (black)
Sheath: Kydex Discreet Carry Concepts Sheath Clip
Made in the U.S.A.
MSRP: $249

Redhawk Performance

I first saw the Redhawk in Taylor Martin’s hand at an outdoor event. We talked about it later that evening, and I was eager to get one and put it through the wringer. First stop—the Irish pub to show the guys. After show-and-tell, it was nearing the holiday season and the Redhawk went to work on package duty. Work included heavy plastic strapping, paper and plastic packaging, bubble wrapping and—as little as possible—tape. I hate sticky blades, so usually I cut through cardboard when breaking them down flat. Believe it or not, paper, grass and cardboard are all hard on an edge.

In the woods, the Redhawk made feather sticks for a fire from wet wood and went on to slice ham and sausages. It kept a small bio stove well fed in the colder end of autumn. The blade performed as expected—well! The handle was nimble, yet substantially comfortable. The scalloped grooves in the Micarta scales did their job, especially in chest-lever and pinch grips.

The Redhawk is a compact cutter built for daily tasks, but it carries the machining DNA of a much larger knife. It’s a minimalist tool with maximum intent—exactly what Tactile Knife Co. set out to build.

Closing

The sheepsfoot blade shape shares genetic material with many knives, such as the Malaysian parang, the Japanese santoku knife, rescue knives and Serbian-style cleavers. There’s no escaping this timeless pattern!

Knife Reviews:

• Sharps Bros. Meanstreak Review: Keen, Mean Cutting Machine
• Relentless Knives Curved Fillet Knife Review
• Cold Steel Finn Bear Review: Light, Sharp And Up To Snuff
• Spartan Blades Clandestina Review: 2024 Blade Knife of the Year