BLADE Show

Hosted in Atlanta, Georgia in May or June every year, the BLADE Show truly is the World’s Largest Knife Show. It features the most diverse array of knives from manufacturers, knifemakers, collectors, dealers and purveyors, all under one roof. The BLADE Show plays host to the Blade Magazine Knife-Of-The-Year® Awards, the Blade Magazine Cutlery Hall of Fame© induction ceremony, seminars, demonstrations and much more.

Visit BladeShow.com for tickets, travel information, exhibitor registration and sponsorship opportunities.

BLADE Show: Knife Debuts Rule!

[slideshow_deploy id=’36122’]

The BLADE Show witnessed a record number of patrons and knives—including knife debuts that were off the charts. Here are eight among the many factory knife introductions.

A 6061 aluminum handle in Class III anodization and self-lubricating roller bearings in the opening mechanism are among the cool features of the MRX-LW from Rat Worx. MSRP: $299.

The ASH 2—”ASH” stands for “Anniversary Steel Heart”—from Busse Combat Knife Co. boasts a bountiful 9-inch blade of the company’s quarter-inch-thick INFI carbon steel.

The Spectrum from Emerson Knives, Inc., has a 3.8-inch blade of 154CM stainless and a NASA-certified black G-10 composite handle. MSRP: $263.95.

Pohl Force adds to its “Mike” line with the Mike Four Tanto in a hard-coat anodized aluminum handle with a glass-breaker screwed into the butt, and a stylish lanyard sporting a skull bead.

A new Integral Lock folder from Chris Reeve Knives, the Inkosi is a cool gent’s folder with a 2.75-inch blade of CPM S35VN stainless steel. Closed length: 3.875 inches. MSRP: $375.

Brous Blades gives the bird’s-beak handle butt a fresh look with the Enforcer flipper folder in the karambit style. MSRP: $319-$359.

Buck’s Inertia assisted opener sports a 3 1/8-inch blade of stonewashed 420HC stainless and an anodized aluminum handle. MSRP: $90.

The first-ever collaboration between Spyderco and Canadian custom knifemaker Brian Tighe, the Tighe Stick is highlighted by a titanium handle 3D machined with Tighe’s trademark swirling-groove look and texturing.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments in the world of knives with a subscription to BLADE magazine!

Kit Carson Inducted into Cutlery Hall of Fame

Legendary Knife Designer of the M16 and M21 knives, Retired Sgt. Major Harold “Kit” Carson is inducted into the Cutlery Hall of Fame at 2012 Blade Show in Atlanta.


Harold “Kit” Carson, long-time knifemaker and designer of the M16 folder for Columbia River Knife & Tool (CRKT), is the latest inductee into the Blade Magazine Cutlery Hall Of Fame©.

Get a great deal on the knife that got him there, the M16 tactical knife, at ShopBlade.com.

Branton Will Throw Knives in BLADE Show Seminar

Long-time knifemaker and knife-thrower Bobby Branton will demonstrate how to throw knives at the 2013 BLADE Show May 31-June 2 at the Cobb Galleria Centre in Atlanta.

As he has done at the BLADE Show for many years, Branton will bring his knife-throwing target and assortment of his custom Pro-Flyte throwing knives. He also has thrown tomahawks on occasion in his seminars. Word is he might be throwing some new factory hawks at this year’s BLADE Show, too.

Bobby Branton talks throwing knives during his 2012 BLADE Show seminar.
Bobby Branton (left) discusses knife throwing with patrons during his seminar at the 2012 BLADE Show.

Branton’s seminars are always casual and impromptu. He chats informally with his audience and encourages questions, comments and other open dialogue. It’s a seminar suitable for the entire family.

A member of the American Bladesmith Society, Branton offers a complete line of utility and mid-tech knives. Many know him as one of the country’s leading knife-throwing knifemakers. He follows in the footsteps of Blade Magazine Cutlery Hall-Of-Fame© member Dan Dennehy, who handled the BLADE Show’s knife-throwing seminars before Branton took over. It was just a few years ago when Mr. Dennehy was inducted into the Cutlery Hall Of Fame that he visited Branton during one of the latter’s knife-throwing seminars. Dennehy entertained questions from the audience and otherwise added to what was a most memorable get together of knife-throwing legends.

In fact, you never can tell who might show up for one of Bobby’s seminars. Past special guests have included Ernest Emerson, among others.

Branton has been active administrating the American Knife Throwers Alliance over the years, and has hosted many knife-throwing events near his shop in Awendaw, South Carolina.

Branton will throw his knives during his seminar the Saturday of the BLADE Show at 10 a.m. in “The Courtyard”—otherwise known as the parking lot of the host hotel, the Renaissance Waverly. Admission is free to all BLADE Show ticket holders.

For more information click on http://www.bladeshow.com/ehome/index.php?eventid=55860&

What REALLY Happened at BLADE Show 2017

BLADE Show 2017 Recap issue
Get the inside scoop on BLADE Show 2017 in the latest issue of BLADE®.

You’ve heard all about BLADE Show 2017 but you can get the inside scoop on the show’s hottest knives and knifemakers and what and who will be hot in the future as a result in BLADE®’s special 2017 BLADE Show Recap issue, on newsstands now! Or, if you prefer a digital copy, click here.

The world’s largest and most important knife event enjoyed its longest lines ever of patrons queuing up to get in, and the patrons packing aisles for much of the three-day event enjoyed the best knives and knifemakers the international cutlery industry has to offer.

Why was the show among the best if not the best ever? What were the demographics of the patrons who attended? What nationalities were represented most in

Japanese handle wrap during BLADE U. class at BLADE Show 2017.
Wally Hostetter showed students how to do the Japanese handle wrap in his BLADE U. class during BLADE Show 2017.
BLADE Show's first balisong competition
BLADE Show 2017 hosted its first-ever balisong competition coordinated by Blade HQ.

what has become a show teeming with knife enthusiasts from all corners of the globe? Did more women attend than ever before, marking a new, unprecedented wave of knife enthusiasts from the female side? How many patrons actually bought knives instead of kicked tires, and how much did they spend?

Speaking of knives, which patterns sold most? What sub-categories of exhibitors—knifemaking suppliers, acc-

BLADE Show 2017's BLADE U.
BLADE Show 2017‘s BLADE University featured instruction for young and old, including Zander Nichols, 13, of Clovis, California.

essory makers and others—emerged in terms of high numbers of sales? And what does it portend for the future of the BLADE Show and the knife industry in general? These questions and others are addressed in “BLADE Show Stands Tall & Delivers” on page 12.

BLADE Show 2017 Overall Knife Of The Year®.
Lionsteel’s SR11 was named the BLADE Magazine Overall Knife Of The Year® at BLADE Show 2017.

Of course, the BLADE Show is much more, including the BLADE Magazine Knife-Of-The-Year® Awards, the BLADE Show Custom Knife Judging Competition and the BLADE Magazine Cutlery Hall-Of-Fame inductions. Get all the specs and fantastic images of the knives by new Official BLADE Show photographer Chuck Ward in the respective stories “Best Blades of Both Hemispheres” and “BLADE Show Custom Kingpins,” the latter including this issue’s cover knife, the CAS/Sam Lurquin Sub-Hilt that won the Hugh Bartrug Best In Show Award.

The announcement that Benchmade CEO Les de Asis and American Bladesmith Society master smith Jim Batson had been elected to the Cutlery Hall Of Fame was made earlier in the year, but why they were elected was revealed in detail during their official inductions during the BLADE Magazine Awards reception the Saturday night of the BLADE Show. Get the lowdown on their career accomplishments, their induction speeches during the reception and more in the special story on page 42.

The BLADE Show is also the place where factory knife companies introduce their latest knives, though this year’s show may have seen more new knife debuts than ever. Check out the fantastic array of production pieces in “All Blades Pointed to Atlanta.”

There’s more this issue, including a salute to Alfred Pendray, tests of locking folders and drop-point hunters, the new Case/Daniel Winkler collaboration, a retrospective of Cutlery Hall-Of-Famer Michael Walker’s landmark linerlock that changed knife history forever and much more, all in the latest issue of BLADE.

2012 BLADE Show Custom Knife Judging Rules

 

Rodney Watts won Best New Maker at the 2011 BLADE Show for his fancy fighter (above).

 

    The 31st annual BLADE Show (www.bladeshow.com) will be June 8-10 at the Cobb Galleria Centre in Atlanta. One of the most important events is the custom knife judging. Below are the rules:

 

NOTE! These rules are subject to change!

 

Special Note: The following rules are in effect for the 2012 BLADE Show Custom Knife Competition.  Any violation of the rules may make the knife and/or the maker ineligible for awards. Any infraction validated after the award presentation may result in the forfeiture of the award.

 

WHAT: The Custom Knife Competition For The 2012 BLADE Show & International Cutlery Fair

WHEN: Friday, June 8, 2012

WHERE: At 3:30 p.m. bring your knife/knives to seminar room #104 for judging. No entries accepted after 4 p.m.

 

QUALIFICATIONS

 

1)     Custom knives can be submitted and accepted only from table holders at the 2012 BLADE Show.  (Shared tables must be declared to show management before the show begins.)

2)     The maker must submit the knife personally and so identify himself/herself as the maker of the submitted knife.  The maker’s business card or some other form of identification should accompany each knife.

3)     The BLADE Show is not liable in any way for the submitted knife while under the care of the BLADE Show.

4)     To be eligible for competition, the submitted knife must have been made after June 1, 2011, and never previously received an award from the BLADE Show.

5)     The knife must be of the entering maker’s construction, excluding embellishments (engraving, scrimshaw, filework, etc.) and materials.

6)     By entering this competition, the entrant confirms that he/she has read all of these rules and qualifications and agrees to said rules.

CATEGORIES:

 

Hugh Bartrug Best in Show            Best Art Knife                                 Best Tactical Folder                           Best Knife Collaboration                 Best Fixed Blade                            Best Fighter                                   

Best Utility Hunter                           Best Sword                                     Best Damascus                             

Best Bowie                                      Best Folder                                       Best New Maker

Yvon Vachon Best Miniature           Best Handle Design                        Most Innovative Design                    

Best Of The Rest

 

BEST KNIFE COLLABORATION: For the best handmade collaboration between two or more artists (knifemaker/knifemaker, knifemaker/embellisher, knifemaker/designer, etc.) on one knife.

BEST NEW MAKER CATEGORY: This category is limited to those who have been making knives for five years or less.

HOW MANY KNIVES YOU CAN ENTER: You may enter up to three (3) knives in the competition, but only one (1) knife per category and one category per knife (in other words, you cannot enter the same knife in more than one category).

BEST UTILITY HUNTER: Should be a hunting knife designed for use in the field.

BEST HANDLE DESIGN: Should be a handle that is notable for its design, whether utilitarian, aesthetic or both.

BEST OF THE REST: For cutting tools that do not fit well in any of the other categories (tomahawks, multi-tools, fantasy knives, ulus, etc.)

WHERE AND HOW TO ENTER YOUR KNIVES: Tables labeled by category will be set up in seminar room #104.  Put your knife on the table pertaining to its category, along with your business card.

HOW TO PICK YOUR CATEGORY: There may be some crossover in categories but the rule of thumb is to look over the knives entered in each category and then enter your knife in the category in which you think it has the best chance to win (as long as it fits the category).

SECURITY: A guard will be present at all times in room #104 to watch your knives.

KNIFE PICK-UP: An announcement will be made for you to pick up your knives when the judging is completed.  Winners will be announced before the close of the show Friday evening.

 

            GOOD LUCK!           

Available Now: Only 12 Limited Edition 2014 BLADE Show Sebenzas

The Chris Reeve Sebenza 2014 BLADE Show Knife is available NOW—and you’d better hurry if you want one because they are in a super-limited edition of only 12. Historically, the lower the number of the limited edition, the more valuable the knives will be, and 12 is one of the lower limited-edition numbers on knives you will see, especially for a BLADE Show knife.

Get your Chris Reeve Sebenza BLADE Show Knife before the super-limited edition of only 12 are all gone!
Only 12 of the Chris Reeve Sebenza 2014 BLADE Show Knives will be sold.

Voted No. 2 in BLADE® Magazine on the list of the top custom knives from the years 1989-2000, the Sebenza is Reeve’s most famous knife and remains his most popular model. Made today in a factory iteration, the knife recently celebrated its 25th anniversary with the introduction of the Model 25, an exclusive version of which serves as the 2014 BLADE Show Knife.

Featuring the official 2014 BLADE Show logo and limited-edition number embossed on the handle, each of the dozen knives includes new concepts Chris Reeve brought to the Model 25, all in celebration of the 25th anniversary. Click here to buy one of 12 BLADE Show Sebenzas.

Those concepts include:

  • The first blade to feature Large Hollow Grind Technology, a blend of the best of hollow and flat grinds;
  • A shaped phosphor bronze washer on the lock side brings additional stability to that side of the blade;
  • An eighth-inch ceramic ball acts as the interface between the lock bar and the blade, and doubles to drop into the detent, ensuring the blade stays in place when closed;
  • Larger perforations in the washers reduce friction, store more lubricant and offer space for small dirt particles to move away from the blade/washer interface, helping prevent the blade action from becoming “sticky”;
  • 416 heat-treated stainless steel drop pin;
  • Asymmetrical pattern thumb serrations on the blade’s curved thumb ramp give excellent purchase, and;
  • At .140 inch thick, the blade is more robust than previous Sebenza models.

In addition, the knife features:

  • CPM S35VN stainless blade steel;
  • Blade length: 3.625 inches;
  • Weight: 5.2 ounces, and;
  • Closed length: 4.71 inches.

Click here to buy one of 12 BLADE Show Sebenzas exclusively from ShopBlade.com. Hurry!

6 Days To The BLADE Show: Blade Magazine Cutlery Hall Of Fame

The 31st BLADE Show (www.bladeshow.com) is only six days away—June 8-10 at the Cobb Galleria Centre in Atlanta—and, among others, it will be the site of the annual induction into the Blade Magazine Cutlery Hall Of Fame©.

  

    Last year, Carl Elsener III (above), mastermind behind the runaway success of Victorinox and its Swiss Army knives, joined the Cutlery Hall Of Fame, the world’s only shrine to the giants of the entire knife industry. This year’s inductee will be honored at the BLADE® Magazine Awards Banquet the Saturday night of the show (tickets required). Living Hall-Of-Fame members elected the inductee by a vote prior to the show. Those already in the Hall include (listed in order of induction):

 

Uncle Henry Baer

Dewey Ferguson

Bo Randall

James B. Lile

M.H. Cole

Al Buck

William R. Williamson

Pete Gerber

Bob Loveless

Bill Moran

Jim Parker

George Herron

Frank Buster

Dr. Frank Forsyth

A.G. Russell

Ken Warner

Jim Bowie

Maury Shavin

Hubert Lawell

William Scagel

Gil Hibben

Harry McEvoy

Buster Warenski

Albert M. Baer

Col. Rex Applegate

B.R. Hughes

Bruce Voyles

Bernard Levine

Houston Price

Bill Adams

Jim Weyer

Chuck Buck

Blackie Collins

Frank Centofante

Ron Lake

Sal Glesser

Joe Drouin

Bob Schrimsher

Rudy Ruana

D’Alton Holder

Michael Walker

George “Butch” Winter

Tim Leatherman

Dan Dennehy

Ken Onion

Al Mar

Paul Bos

Carl Elsener III

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement