The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Help Fight 1 Percenters’ Ban-All-Ivory Law

Brady and ivory.
Sandra Brady of the Elephant Protection Association urges citizens of Washington state to fight against a new anti-ivory initiative.

A ban-all-ivory law supported by billionaire Microsoft co-founder Paul Allen and other 1 percenters is on the ballot in Washington state and will succeed unless you help stop it NOW!

The measure, I-1401, would ban not only elephant ivory but also the ivory of mastodon, mammoth and other extinct species.

Sandra Brady of the Elephant Protection Association said help is needed at the grassroots level to defeat the measure supported by rich billionaires such as Allen and other non-governmental organizations, which have raised more than $2.7 million—including $1.7 million from Allen—in an effort to pass it in the state legislature.

“It really is a David versus Goliath situation,” she observed of the fight against the 1 percenters who are supporting I-1401. She urged those who oppose the bill to write their local newspapers and use social media to voice their opposition. “On the upside we are having an impact,” she said of the grassroots effort. “On the down side, the more states that pass such ridiculous measures, the more likely other states will follow suit. This is why your help to defeat this in Washington state is so important.

“Write letters to the editors of the state’s newspapers, use your voice on Facebook and other social media. Help us get the word out that I-1401 is a bad law and should be voted down.”

A small organization, the Legal Ivory Rights Coalition Committee (LIRCC), is fighting against Allen and the other fat cats who are supporting I-1401. However, the LIRCC has no budget and relies on people contacting newspapers and working social media to spread the word. The good news is that editorial pages across Washington state are calling I-1401 misguided. While acknowledging the noble goal of preserving elephants, many editorial pages recognize the futility of a state law designed to stop crime in Africa and Asia. It would punish the state’s citizenry without stopping poachers. They also recognize the redundancy with existing federal laws that prohibit import of ivory and other endangered species, together with the unnecessary burden it would place on the state’s fish and wildlife officers.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments on this and many more knife rights issues with a subscription to BLADE.

Ivory Ban Proponents Feel The Heat

Stop heinous ivory bans!
Help stop such heinous ivory bans as the one in New Jersey that forbids fossil ivory, too. Mike Craddock employs fossil walrus ivory on his damascus beauty. (SharpByCoop image)

Ivory ban proponents are feeling the heat from those who would protect their right to own and sell legal ivory on both the federal and state levels.

If recent developments are indicative, the actions of those fighting to protect their right to sell their legal ivory are having the desired effect.

However, much work remains to be done.

According to Rob Mitchell of the Elephant Protection Association, ivory ban proponents have been scrambling to torpedo pending Congressional bills that would stop a nationwide ivory ban. “In the past few weeks, the Wildlife Conservation Society [WCS] has e-mailed its members praising the the New Jersey ivory ban while soliciting contributions to fight back the bills pending in Congress to stop a federal domestic ivory ban,” Mitchell writes.

New Jersey’s ban is especially heinous as it bans not only elephant ivory but fossil ivories as well. Like New Jersey, New York has instituted a state ivory ban that exceeds the restrictions recommended by U.S. Fish and Wildlife.

According to Mitchell, John Calvelli of the WCS said, “I can’t overstate what a threat this is. These bills could be attached to any larger piece of legislation and swiftly passed at any time.” Meanwhile, the WCS is calling on its members to urge their lawmakers to halt any and all efforts to stop ivory bans on both the federal and state levels.

Mitchell indicated the WCS is disseminating false stories to trigger public hysteria about the possibility of elephant extinction in attempts to snuff out rational discourse on how to both protect elephants and Americans’ right to sell their legal ivory. He added that the WCS is “an organization with over $210 million in annual revenue and over $750 million in assets” that “continues to lead the publicity campaign drawing misleading relationships between legal ivory in the United States and poaching in Africa.”

For information on how you can help protect both the elephant and the rights of Americans to sell their legal ivory, visit elephantprotection.org.


The latest issue of BLADE is on newsstands now!
The BLADE Magazine 2014 Knives Of The Year® highlight the new BLADE®, on newsstands now!

Stay abreast of the latest developments on this and many more knife rights issues with a subscription to BLADE.

BLADE Show: Knife Debuts Rule!

[slideshow_deploy id=’36122’]

The BLADE Show witnessed a record number of patrons and knives—including knife debuts that were off the charts. Here are eight among the many factory knife introductions.

A 6061 aluminum handle in Class III anodization and self-lubricating roller bearings in the opening mechanism are among the cool features of the MRX-LW from Rat Worx. MSRP: $299.

The ASH 2—”ASH” stands for “Anniversary Steel Heart”—from Busse Combat Knife Co. boasts a bountiful 9-inch blade of the company’s quarter-inch-thick INFI carbon steel.

The Spectrum from Emerson Knives, Inc., has a 3.8-inch blade of 154CM stainless and a NASA-certified black G-10 composite handle. MSRP: $263.95.

Pohl Force adds to its “Mike” line with the Mike Four Tanto in a hard-coat anodized aluminum handle with a glass-breaker screwed into the butt, and a stylish lanyard sporting a skull bead.

A new Integral Lock folder from Chris Reeve Knives, the Inkosi is a cool gent’s folder with a 2.75-inch blade of CPM S35VN stainless steel. Closed length: 3.875 inches. MSRP: $375.

Brous Blades gives the bird’s-beak handle butt a fresh look with the Enforcer flipper folder in the karambit style. MSRP: $319-$359.

Buck’s Inertia assisted opener sports a 3 1/8-inch blade of stonewashed 420HC stainless and an anodized aluminum handle. MSRP: $90.

The first-ever collaboration between Spyderco and Canadian custom knifemaker Brian Tighe, the Tighe Stick is highlighted by a titanium handle 3D machined with Tighe’s trademark swirling-groove look and texturing.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments in the world of knives with a subscription to BLADE magazine!

Act NOW on Ivory Comment Extension

Request an extension on the comment period for the punitive proposed federal ivory regulations NOW! Jean Louis Regel uses ancient walrus ivory for the handle of his bowie. (SharpByCoop image)
Request an extension on the comment period for the punitive proposed federal ivory regulations NOW! Jean Louis Regel uses ancient walrus ivory for the handle of his bowie. (SharpByCoop image)

To help save all ivory from proposed punitive federal regulations, request an extension for the comment period on the regulations from the U.S. Fish and Wildlife Service NOW!

Among other unreasonable stipulations, the regulations would require you to prove that the ivory on your knife or other item was imported prior to Jan. 18, 1990—a near impossibility for most people to prove about such items. The regulations also claim that the USA continues to play a role as a destination and transit country for illegally traded elephant ivory. However, as Sandra Brady of the Elephant Protection Association noted, the regulations offer no proof of this claim and no figures as to what percentage of illegal ivory is “laundered” here.

The proposed regulations were released on July 29, and concerned citizens were given only 60 days to contact the Fish and Wildlife Service (FWS) with any objections the citizens might have to the regulations. Since there are 27 pages of proposed regulations, regulations the government had over 13 months to research and write, it seems only fair that concerned citizens get more than 60 days to respond. In fact, the law provides for up to a 90-day comment period, which is especially appropriate for regulations that are so voluminous and affect so many Americans.

The Elephant Protection Association has composed a form letter for you to use to request the extension. The letter is located here. Keep your request short and simple. Amend the letter to fit your association/group but don’t try to make a substantive case of why the extension should be granted so much as simply let FWS know the extension must be granted. The more people, associations and groups that request the extension, the better. In this instance, it’s more a matter of the quantity of requests than the quality of them.

The Elephant Protection Association strongly advises that you send your letter via priority or overnight mail with a means of confirming receipt.

For more information visit elephantprotection.org.

 

George Tichbourne Passes Away

0

George Tichbourne, a long-time knifemaker and valued friend of Knife Showcase, passed away Dec. 6 after a long illness. He was 64.

George made bowies, hunters and folders, and kitchen, art and military knives. Featured on page 75 of the December 2010 BLADE®, George related an instance of making a knife for a Marine to take into combat.

“He opted for a military pattern styled after a World War II bayonet,” George recalled. “I’ve donated similar knives to units that contacted me looking for gifts to boost morale. One group sent photos of a recipient getting his knife, with the U.S. flag that flew over their base in the background, a letter of thanks and a challenge coin. I was touched by their gratitude.”

Visitation will be tomorrow, Dec. 9, from 4-9 p.m. and Friday from 2-9 p.m. at Wards Funeral Home in Weston, Ontario, Canada.

The funeral will be Saturday, Dec. 11, at 11 a.m. at the North Bramalea United Church in Brampton.

For more information visit http://tichbourneknives.com/index1.htm.

History Channel Features Ka-Bar Knives

Ka-Bar Knives is set to star in the premier episode of the new History Channel series What People Earn. What better theme than “Beer, Knives & Football” for the initial episode of the show, and at 115 years old and going strong, is there a better fit than Ka-Bar for the show, starring alongside Samuel Adams, the famous brewer? It’s time to kick back, relax, grab a brew, and watch What People Earn while mindlessly, though carefully, opening and closing your Ka-Bar pocketknife.

A companion piece on the new show and KA-BAR Knives will run in the March 10 issue of Parade Magazine. 6112CU_HalfSize

What People Earn will air at 10 p.m. EST on Sunday, March 10 on History Channel 2.  History Channel 2 can be found on DirecTV channel 271. Dish Network subscribers can find the premier of What People Earn on channel 121.  For cable subscribers, please check your local listings. For additional information, please visit History.com.  To learn more about KA-BAR Knives, please visit KA-BAR.com or call 800-282-0130.

Horseman’s Knife is One Gorgeous Affair

Featured in the “Take It To Your Graver” chapter in the “State Of The Art” section of the Knives 2013 book, C. Gray Taylor’s horse knife exhibits an antique-tortoise-shell handle, and at least 18 implements, such as a hoof pick, bleeding blade, main blade, file, saw, tweezers, cork screw, punches, awl, toothpick, and a tiny swing-handle folder, also with what looks like a tortoise handle.

The centerpiece of the handle comes in the form of a gold horse carved and engraved by Lisa Tomlin, and it is the coup de grace of an already astounding art knife. Bravo! The photo is by Eric Eggly, PointSeven Studios.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement