The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Knives of The Expendables 2

Sylvester Stallone (top) holds the Gil Hibben Toothpick (second from top left, above) in a scene from The Expendables 2. Along with the modified version of Gil’s Alamo Bowie (top left, above), it is a carryover from the first film in the series, The Expendables. The Legion Fighter (fourth from top left, above) is the knife Hibben made expressly for Stallone for the sequel. (photo from The Expendables 3 by Frank Masi; photo of Hibben knives by Mike Carter)

    The longest-running custom knifemaker/movie star connection of all time will have another go soon with the imminent worldwide release of the action blockbuster, The Expendables 2.

    Blade Magazine Cutlery Hall-Of-Fame© member Gil Hibben has a rich history with writer, producer and actor Sylvester Stallone. It began at Dan and Pam Delavan’s 1985 California Custom Knife Show when Stallone visited Gil’s table and walked away with several of Gil’s custom knives. That encounter led to Stallone calling on Gil to make the famous survival knife (cover inset, August 1988 BLADE®) that Stallone wielded in Rambo III and later the massive machete (cover, February 2008 BLADE®) in the fourth movie in the series, Rambo.

    In 2010, The Expendables, co-written, directed by and starring Stallone, along with an all-star cast of action-film heroes, again employed Gil’s knives. Stallone’s character, team leader Barney Ross, carried a custom Hibben 17.5-inch “Toothpick” model (cover, November 2010 BLADE). Meanwhile, Gunnar Jensen, played by Dolph Lundgren, and Lee Christmas, played by Jason Statham, took turns using a huge, 19-inch custom Hibben bowie.

    All of the original Expendables except Mickey Rourke return for The Expendables 2, which at press time was due to open in theaters Aug. 17. The all-star cast has grown with the addition of Chuck Norris and Liam Hemsworth to the Expendables team. Action star Jean-Claude Van Damme joins the cast as the leader of an opposing team of mercenaries, along with his right-hand man, Hector, played by Scott Adkins. Both Bruce Willis and Arnold Schwarzenegger return with more substantial parts in the new film. The $100 million sequel was filmed in Bulgaria in late 2011.

SLY ON LINE 1

Gil received the call from Stallone early last year to discuss the knives Stallone wanted for the sequel. Two of Gil’s knives from The Expendables will return to the big screen in The Expendables 2. His big custom bowie again will be carried by Lundgren, and both Stallone and Van Damme will be seen with the Toothpick. But Stallone said he wanted more—a lot more.

    The amazing 76-year-old Gil set to work and delivered at least 10 different models, including multiple copies of some and a few prop knives with half blades to give the appearance of being embedded into something or someone. As before, some of the knives have the Expendables skull-and-raven logo scrimshawed on the handles by scrimshander Richard “HutcH” Hutchings, who does nearly all of Gil’s scrimshaw work. HutcH also scrimmed the logo on several sets of black Micarta Colt .45 pistol grips Gil provided for the film.

    Some of the knives Gil made for the movie were based on previous models he has made during his 55-year career, though some are new designs he made especially for the film. Among those expected to be prominently seen is his Legion Fighter, this issue’s cover knife, a recurve fighter with a 9.5-inch blade of quarter-inch 440C stainless steel. The Micarta handle is sandwiched between a hefty stainless steel guard and buttcap.

    One of the new, never-before-seen models is a split-blade fighter, somewhat reminiscent of Gil’s “Double Shadow” knife (second photo from top, third knife down from top left), with a stainless steel guard and buttcap and a handle of black Micarta and amber.

    Stallone chose the big bowie that appears in both the original movie and the soon-to-be-released sequel after seeing a similar model, Gil’s Alamo Bowie, on the Hibben Knives website (www.hibbenknives.com). The decision was made to modify it with a different handle of ivory Micarta® that could be scrimshawed with the skull-and-raven Expendables logo seen throughout the original film on tattoos, motorcycles, clubhouse doors and the knives. The long, slender Toothpick carried by Stallone in both movies was an entirely new design Gil developed for The Expendables.

    I have seen some stills from the sequel and a couple of preview trailers that show some of the knives very prominently displayed, but it remains to be seen what makes the final cut. “We never know what will actually end up in the movie,” Gil notes. “Sometimes scenes are filmed using the knives and then those scenes get cut in editing. I guess we will find out when everyone else does at the theater.” (Editor’s note: From reports at press time, the Legion Fighter cover knife gets its best movie air time when actor Randy Couture, who plays the role of Toll Road, uses it.)

IMPROVISE AND REVISE

As is usually the case when making knives that will be featured in a film, designs are revised and changed along the way to satisfy the producers, directors, prop masters and actors involved. Once the designs are finalized and approved, Gil has to scramble to get several copies made and delivered to remote filming locations such as Burma for The Expendables and Bulgaria for The Expendables 2. The knives he makes for the films are fully functional and sharpened. In some cases the prop department will make dull replicas that can be safely used in close-up fight scenes.

    The Expendables featured an impressive lineup of stars that, in addition to Stallone, Lundgren, Statham, Willis, Couture, Schwarzenegger and Rourke, included Jet Li, Steve Austin and Terry Crews as a team of elite mercenaries. Eric Roberts played the bad-guy/corrupt CIA agent.

    The Expendables was No. 1 at the box office in its opening weekend in August 2010. The film’s budget was reportedly $70 million. It grossed over $274 million worldwide by the end of the year, and that is not counting DVD sales. That was certainly enough success to entice movie officials to make a sequel.

REEL STEEL BY THE DOZENS

Gil has made knives for dozens of movies and television shows, including designing and making Klingon swords and knives for assorted Star Trek TV shows and movies, throwing knives in Steven Seagal’s Under Siege, and knives in The Perfect Weapon starring Jeff Speakman. He also has enjoyed a following among Hollywood celebrity collectors, among them Elvis Presley, John Wayne, Steve McQueen and Shelley Berman.

    Stallone long has been a collector of custom knives and a fan of Gil’s work. In fact, Stallone ordered some large custom lockback folders based on the Rambo III knife design he had personalized as gifts to Willis and Schwarzenegger during the filming of The Expendables.

    The Expendables 2 will be the fourth Stallone film for which Gil has made custom knives. There are Hollywood rumors of further Rambo and Expendables sequels, so you may be seeing more of the Stallone-Hibben connection.

    The Expendables 2 is produced by Nu Image and Millenium Films, and is distributed by Lionsgate. It is written by Sylvester Stallone and Richard Wenk and directed by Simon West.

Gunny Salutes Fallen Policeman

R. Lee “Gunny” Ermey, who will appear at the 30th Annual BLADE Show June 10-12 at the Cobb Galleria in Atlanta, made a special appearance in Chattanooga, Tennessee, May 13 to speak on behalf of a local policeman killed in the line of duty.

The policeman, Sgt. Tim Chapin, was answering a robbery call when he was shot and killed. The murder has resulted in an outpouring of concern from the local citizenry, and Gunny’s appearance was a most welcome one to a grieving community.

Ermey took the stage at a benefit for the Fallen Officer’s Fund sponsored by the Shooter’s Depot to raise money for the cause, specifically designated to the Chapin Family Memorial Educational Fund.

At one point Ermey threw an autographed football to one of Chapin’s sons, and addressed the family. “I know you will all keep moving forward and trying to make the best of it,” Gunny said. “All the best to you. God bless.”

Ermey will appear at the SOG Specialty Knives & Tools booth the Saturday of the BLADE Show from 10 a.m. to 5 p.m. to sign autographs and pose for pictures.

Buck Collectors Observe 25th Anniversary

David Yellowhorse enters the Buck Collectors Club during the Buck Collectors Silver Anniversary gala. From left: Larry Oden, David Yellowhorse, Gene Merritt and John Foresman.
During the Buck Collectors Silver Anniversary, David Yellowhorse is inducted into the Buck Collectors Club Hall Of Fame. From left: Larry Oden, David Yellowhorse, Gene Merritt and John Foresman.

 

Hundreds of Buck knife collectors converged on Spokane, Washington, and Post Falls, Idaho, last week for the Buck Collectors Club International’s 25th Anniversary Gala.

 

A celebration of Buck knives, seminars on Buck knives, tours of the Buck manufacturing plant just across the border in Post Falls, and much more highlighted the event, which drew collectors from all over the country.

 

Such Buck VIPs as Blade Magazine Cutlery Hall-Of-Fame© member Chuck Buck, Lori Buck, CJ Buck, David Yellowhorse, Wilde Bill Cody, Leroy Remer, Mike Prater, Fred Wilson and many others mingled with Buck collectors throughout the festivities.

 

The event kicked off with a banquet Tuesday night, and included the induction of four into the BCCI Hall Of Fame: knifemaker Jerry Bodner, Jane Davie and the aforementioned Mssrs. Yellowhorse and Wilson. BLADE® (www.blademag.com) Magazine Editor Steve Shackleford served as the banquet keynote speaker and was presented with a special plaque in recognition of his work with the BLADE Show (www.bladeshow.com) and support of the BCCI over the years.

 

Wednesday included a complete slate of seminars and factory tours. The seminars included one on Buck Yellowhorse knives by award-winning Buck Yellowhorse collector Gene Merritt. The day was capped by a sunset dinner cruise on the nearby Lake Coeur d’Alene. Thursday featured seminars by CJ Buck on what’s on the horizon at Buck Knives and on Buck Customs by John Foresman, Leroy Remer and Wilde Bill Cody, among others. A “Knife Swap Plus” was held Thursday evening and included Russ Donoghue signing his new BCCI History Book, raffles, auctions, artist demos and more. The event concluded with more seminars Friday, including one on the Buckmaster/M-9 and Buck Tactical Knives by Rich Neyman, and a Buck Knife Survival Seminar by Karen Hood. A picnic at the home of Chuck and Lori Buck was a fitting end to the extravaganza.

 

For more information on the BCCI, visit www.buckcollectorsclub.org.

 

For the latest knife news, stay honed to www.blademag.com.

 

Thank You For Your Support for our Campaign For Japan

The outpouring of support for our Campaign For Japan was more than we could have expected. Sales of items–50 percent of the profits of which go toward victims of the Japanese earthquake and tsunami–were up across the board for the duration of the sale, which ended Wednesday.

 

Again, thank you all for your support. We are certain the thousands of victims of the devastation will thank you as well.

Emerson Knives Opens New Factory by Mike Searson


The following was excerpted from examiner.com, and written by Mike Searson, Knife and Sword Examiner:
Emerson Knives held the grand opening of its new factory in Harbor City, California this past weekend, with more factory space, an in-house CQB-training area, visitor lobby and other amenities.
 
There were several charity raffles, door prizes, contests, a raffle to “Build your own knife,” a custom knife lottery, and a demonstration by martial arts aficionado and Emerson instructor, Richard Bustillo, with a number of his students from the IMB Academy. Additionally, tattoo artist Vance Foster was on hand to provide body art for any willing subjects.
 
Ernest Emerson set up a “virtual museum” with the timeline of Emerson Knives featuring photos and some rare and unique pieces from the vault. Emerson made his first knife, a butterfly knife, in 1979, while working as a machinist for an aerospace company in southern California because he could not afford to buy one for his martial arts class. He had been studying under Dan Inosanto and Richard Bustillo (both protégés of the late Bruce Lee) at the time, and soon received requests from other students to make knives for them. Emerson made these early knives in exchange for the cost of materials. 
 
He branched out into more conventional designs of the time, fixed blade knives and lockback folders, but soon was intrigued by the LinerLock® design developed by Michael Walker. With Walker’s permission, he incorporated the lock into his own designs and used high-end materials such as mother-of-pearl, titanium and paua shell in his knives. Falling back on his martial arts background, he stripped these designs down to their essence and made a series of tactical knives. These knives featured bead-blasted titanium hardware and black-canvas-Micarta® scales.
 
In the 1980s he was contacted by a group of “underwater welders” to build a “hard use folding knife as strong as a fixed blade that could perform in extreme environments.” The “welders” turned out to be members of SEAL Team Six, for whom Emerson designed a knife from the ground up. The knife incorporated a unique chisel-ground blade, sharpened on only one side to eliminate parasitic drag and was named the CQC-6.  
 
After profiles in knife magazines and being mentioned in the novels written by Richard Marcinko, the founder of SEAL Team Six, the CQC-6 took the knife community by storm in the 1990’s. Military and firearm aficionados purchased the knife as did legions of knife collectors. Emerson designed a slightly different version for Benchmade Knives in 1994, the CQC-7.
 
In 1997, Emerson launched his company as a full-time endeavor to produce knives on a larger scale for both his military and police contracts, and to supply the quickly growing collector base. 
 
More than just a Knifemaker, Emerson is an accomplished martial artist. This new facility not only has more factory and warehouse space, but has a dedicated training area for Emerson’s CQB classes.
 
The highlight of the grand opening was the fabled “Emerson Lottery.” When the demand became overwhelming, Emerson stopped taking custom orders in 2000 and the only way to get a custom knife from him was at a show. To make it fair to the numerous collectors, dealers, and purveyors, this is done via lottery. Names are written on slips of paper and placed in a box. Whoever’s name is drawn gets a chance to buy a knife at the “table price.” Often the ratio of knives to consumers is more than 10-to-1, and with good reason. A custom knife may cost $650 at a show, but on the aftermarket can go for more than three times that amount.
 
As is always the case with Emerson Knives, the donations for the raffles were generous. According to Mary Emerson, over $3,000 had been raised to benefit the Injured Marine Semper Fi Fund, The Naval Special Warior Foundation and St. Jude’s Children’s Hospital.
 
For more information on Emerson Knives, consult the company’s website: http://www.emersonknives.com.
 

It’s a Hard-Use Knife

I don’t generally abuse knives. Though I do fish, camp, hike and ski whenever I get the chance, using knives hard and putting them away wet is pretty unusual for me. The hardest I ever used/abused a knife was out in the horse pasture, and I laugh about that.C14SBK3_Both

It had been a long day. I’m also not the “horse person” in my family. That would be my wife, and I wasn’t thrilled to be replacing fence posts, a job I’ve since become accustomed to yearly. Anyway, I was tired. Did I mention I’m an editor and writer? And I needed to cut some high-tensile electric wire (the fence was unplugged at the time—at least I had that right). I didn’t have a wire cutter on me, and the garage had to be at least 50 yards away. I pulled out my serrated Spyderco folder. The model escapes me, but it was a good knife, pocket clip, one-hand opener, lockback, the works. I figured the serrated blade could cut the wire, and cut the wire it did. The thick wire also chipped a blade serration, but it was well worth saving a trip to the garage. I cut several more wires that day with the Spyderco, and by the time I was done for the day, the blade looked like a toothless mountain model rather than a big-city blade. Oh well, there were more knives in the drawer, and that Spyderco holds a place of honor among them, though missing a few teeth.

What’s the hardest you ever abused a knife? Need a new one, click here, or just share your story with BLADE and KnifeForums users.

Buck Knives Reports Successful 2009

0

American Commitment working, expansion planned for 2010

POST FALLS, IDAHO When Buck Knives announced their American Commitment a year ago, they
knew exactly what they wanted to do: greatly increase the percentage of knives made in their Post
Falls, Idaho plant.

“We had absolute faith in this major step; that’s why we made the commitment,” said CJ Buck,
president and CEO. “We fully anticipated a positive reaction and a successful year, but these were
forecasts and projections.”

Now the results are in for 2009, and this step forward has proved to be successful on all
counts. Dealers and consumers all reacted positively. Retail sales for Buck in a tough year for
American business were steady, headed by strength in the hunting segment of the market.
“Dealers welcomed the change,” Buck said. “They and their customers verified our belief that,
given a choice, most people prefer products Made in America.”

Based on this encouraging progress and a continued commitment to American-made product,
combined with the very positive response the new products received at the SHOT Show, Buck’s
plan for 2010 is an upsurge in domestic production. To achieve that growth they anticipate a 10%
increase in their Idaho work force.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement