The Gerber Freeman Hunter is our “Knife Of The Day” for the 1st of December.
A past “Best Of The Best” honoree of Field & Stream magazine, the straight knife features a polished pear wood handle, a 3.25-inch blade of AUS-8 stainless steel with a full-length tang, and a single guard. Includes leather sheath. Overall length: 8.25″. Weight: 4.10 ozs. BLADE Shop’s price: $44.99.
A lockback folder with a stunning mammoth tooth handle, copious filework and engraved bolsters distinguishes one of knifemaker Pete Truncali’s latest offerings.
Featuring a 2 9/16-inch blade of ATS-34 stainless steel, Pete’s folder was engraved by Tony Pitts. Closed length: 3 7/8 inches.
For more information on Pete’s knives click www.truncaliknives.com or visit his table, 3E, at the 2012 BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta .
For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.
Halloween knives conjure visions of human steak and Bela Lugosi, high tops and Frankenstein, and decapitations and zombies. Warming to the genre yet?
ABS master smith Wally Hayes makes a couple of Halloween knives that fit the mold like a stake in Frank Langella’s heart: the Vampire Stake and the Zombie Spike. Formed like, well, a stake to drive into the chest of one of the spooky set’s most famous blood-sucking ghouls, the Vampire Stake has a distinctive cross forged into the handle butt to intimidate the worst of the slimy night crawlers, antique coloration and a leather sheath. The Zombie Spike, on the other hand, is 6 inches long and fashioned from O1 tool steel ground and heat treated for high performance. Hayes says it’s popular among his law enforcement customers, though he didn’t mention if it was the officers in the CSI: Walking Dead unit or not. It comes with a Kydex sheath.
Creatures of the night cringe at the sight of the Vampire Stake by Wally Hayes.Wally Hayes‘ Zombie Spike will keep the Walking Dead on their toes.
Dan Keyes‘ “The Count” features a coffin handle with inlaid ivory crosses, a fullered, 30-inch blade of double-drawn 440C stainless steel and LED bulbs that light The Count’s red eyes. The skull is powder-coated “anthracite gray” with highlighted airbrushing. Weight: Just short of five pounds. Overall length: 38.5 inches.
The Count by Dan Keyes is just what Dr. Death ordered.The red eyes of The Count’s skull light up with the flip of a switch in the handle next to the black-leather-lined skull.The Count boasts a 30-inch blade, weighs just short of 5 pounds and is 38.5 inches long overall.
The creation of French knifemaker/artist Jean-Marc Laroche, The Living Knife has a “hand” for a handle with “fingers” that close, an “eye” and an overall lifelike appearance that will literally, er, grab you. As you grab the handle, the “fingers” actually grab back so that it’s hard to tell who’s holding whom. And, as the fingers grab your hand, the “eye” opens. The hand also is embellished with gears in the Steampunk style. The blade is a composite of 15N20, 15LM and UHB11 high-alloy nickel and carbon steels in explosion, twist and random patterns forged by Swedish maker Roger Bergh. Overall length: 25 inches.
When you grab the “fingers” of the “hands” of Jean-Marc Laroche‘s The Living Knife, they literally grab you back!
The MacV Tool from SOG Specialty Knives & Tools is shaped like a skull and is 12 tools in one, including 1/4-, 5/16 and 3/8-inch wrenches, blade sharpener, strap/cord cutter, small and large flathead screwdrivers and more. Designed to resemble the original skull from the MACV-SOG group of Vietnam War fame the company is named after, it measures 2.5 by 1.5 inches and weighs .6 ounce.
Shaped to resemble the skull logo of the original MACV-SOG group of Vietnam War fame, the MacV Tool from SOG Specialty Knives & Tools is 12 tools in one.
A toxic green handle and big, bad modified-cleaver blade in a black finish complete the KA-BAR Zomstro Chopper.
As you might imagine, knives with a zombie theme are undead and well, including the Reaver Cleaver from Zombie Tools and the Zomstro Chopper from KA-BAR. Based on the Chinese war sword, the Reaver Cleaver features an 18-inch blade of 5160 carbon steel, weighs 3 pounds, 10 ounces, and is 31 inches overall. The Zomstro Chopper, meanwhile, features a big, bad modified cleaver blade in a black finish and KA-BAR’s toxic green Zombie handle.
If The Count and the rest of our Halloween knives don’t keep you down for the count, you might be among the living dead. If so, stay clammy and watch out for sunrise!
John Perry employs the classic gunstock-lobster pocketknife pattern to showcase the mother-of-pearl. (Chuck Ward image)Gold engraving by Martin Butler borders the stunning black-lip mother-of-pearl inlay in Warren Osborne’s interframe folder. (SharpByCoop image)
7 pearl knives for Dec. 7 somehow seems oh so fitting. Dec. 7, 1941—the date which lives in infamy marked the USA’s entry into World War II and the awakening of a military dynamo that would vanquish Japan and play a crucial role in the defeat of Germany in Europe. Japan’s bombing of Pearl Harbor early that day thrust America headlong into the maelstrom that would change the world forever.
With the 74th anniversary of that momentous event upon us, we thought a fitting way to observe it would be with knives sporting one of the most beautiful of handle materials: mother-of-pearl. Called pearl by most, the material is coveted on higher-end knives and makes for a most worthy edged presentation.
Herein are seven of those knives in memory of Dec. 7. Enjoy!
Black-lip mother-of-pearl rarely looks as pleasing as it does on Tom Overeynder’s folding art dagger. (PointSeven image)Don Hanson’s mother-of-pearl folder boasts some of the maker’s forged mosaic damascus for the blade and bolster, and titanium liners anodized blue. (PointSeven image)Kyle Hanson goes the mother-of-pearl route in damascus and with a handsome leather sheath. (PointSeven image)Ken Steigerwalt uses black-lip mother-of-pearl for the inlay on his damascus art folder with a modified tanto blade. Accents in 14k gold add to the mix. (SharpByCoop image)Gilles Victors of Vacquiers, France, offers up his “Zephyr” model in mother-of-pearl as well as a handle of carbon fiber. The damascus blade comes in a modified wharncliffe style.
The Ohio Classic Knife Show hopes to build on the momentum of recent knife shows as it holds its annual event today and tomorrow.
Both the California Custom Knife Show held this past weekend and the Knifemakers’ Guild Show held last month were successes by a number of accounts, and the Ohio Classic hopes to build off their momentum as well as some of its own.
For instance, purveyor/collect Jon Ukman noted of the Cal show, “It was outstanding! I bought about 70 knives—and that is a good show.” Purveyor Dave Stark of Steel Addiction Custom Knives also had words of praise for the Cal show. Meanwhile, ABS bladesmith Johnny Perry, who helped display a collection of Bill Moran knives for the Moran Foundation at the Knifemakers’ Guild Show last month, said the Guild Show was a good one as well.
Held at the Pritchard-Laughlin Civic Center in Cambridge, Ohio, the Ohio Classic runs from 1 o’clock this afternoon until 7 tonight, and 9 a.m. to 5 p.m. tomorrow. In addition to some of the custom industry’s top makers, the show will include some leading factory knife exhibitors and also a cutting competition tomorrow. In addition, Jeff Fournier from Mule Team Canvas will give a demo on canvas dying.
Exhibiting knifemakers include Tom Downing, Blind Horse Knives, Ryan Daniels of Queen Cutlery, Phillip Booth, Wayne Hensley, Pete Crowl, Andrew Demko, George Trout, Mickey Yurco, Greg Gottschalk, W.C. Johnson, James Downs, Thad Yeater, Gary Wheeler, BLADE® field editor Kim Breed, Lon Humphrey, Craig Steketee, Mark Carey of Spartan Blades, Bill Behnke and many others. Also exhibiting will be Charles Turnage of Turnage Productions, photographer Terrill Hoffman, purveyor Jerry Schroeder, Pop’s Knives and Supplies, Brad Vice of Alabama Damascus, Brad Stallsmith of Peters Heat Treat and many others.
This Landon Robbins fixed blade in 1084 carbon steel won Best Fighter at the Branson Hammer-In & Knife Show. (Chuck Ward image)
Today’s red-hot forged knives include some of the best in utility and other patterns, most all in blades of high-carbon steels such as 5160, 1095, 52100 and others. Though the steels are not classified as stainless, you can control the pitting and rust on the blades by simply wiping them down after each use. No biggy, really, if you think about it. Properly heat treated and ground, the blades are easy to sharpen and cut like bandits.
Here are eight knives hot from the forge, starting with a sexy fighter in 1084 carbon steel by American Bladesmith Society journeyman smith Landon Robbins of Crane, Missouri. The understated hamon or temper line of the clip-point blade, S-guard and “dropped” blackwood handle make this puppy stand out—and it also took home the award for Best Fighter at the recent Branson Hammer-In & Knife Show.
Check out BLADE’s collection of its best knife collecting books and resources, all in one bundle at a hot price. Click the image to go to ShopBlade.com.
David C. Lemoine embellishes the blade of 5160 on his drop-point hunter with a short burst of filework on the spine. A single mosaic pin accents the contrasting brown and black lacewood bird’s beak handle. Overall length: 8.25 inches. A pouch sheath completes the package.
ABS master smith Don Fogg says a sign of a well-done hamon is one that stands out and is easy to describe. We christen the hamon on the W2 tool steel blade of ABS journeyman smith Tad Lynch‘s bowie “thundercloud” for its resemblance to an oncoming storm. The handle is Micarta®. Overall length: 14.5 inches.
Lyons and tigers and bears—oh my! In this instance the Lyons is ABS journeyman smith Bill Lyons of Palisade, Nebraska, maker of a slick hunter with a deep-bellied blade of 5160. The silver-wire-inlaid handle is separated from the blade by a minimalist guard. Overall length: 7.5 inches. The knife includes a leather belt sheath.
ABS master smith Jerry Lairson enjoyed past success on the cutting competition circuit and parlays some of that experience into his kukri in 5160 carbon blade steel and an ironwood handle. The kukri designs lends itself to chopping, one of the main requirements of any good competition cutter. Overall length: 16 inches.
Raymon Hunt of Irving, Texas, chose O1 tool steel for the 5.25 inch blade of his boot dagger. A silver ferrule separates the knife’s double-ground blade from the ebony coffin handle. Overall length: 9.75 inches. Boot daggers, a very popular style in the early days of the modern custom knife movement, aren’t seen much anymore, so Mr. Hunt’s offering is a welcome window on a bygone style long overdue for a comeback.
Another carbon steel blade with an understated hamon—this time in 1095—highlights Joel Austin‘s bowie. The straight-back blade and Spartan features make this a knife we could see Jim Bowie wearing back in the day walking down some dark alley in Natchez-Under-The-Hill, Mississippi. The handle is ironwood. Overall length: 13 inches.
Goldie became the first female member of the Hall two years ago and, in the process, joined husband A.G. as the Hall’s only husband-and-wife team. A.G. is one of the few living founding members of The Knifemakers’ Guild and a treasure trove of information on the history of modern cutlery. Goldie basically runs operations at A.G. Russell Knives now and plays an active role in supporting the American Knife & Tool Institute and its goal of protecting the rights of all knife enthusiasts.
Want information on the history of knives in general? Knife industry legends Adams and Voyles can regale you with vintage tales of the knife industry, both domestic and international. Speaking of knife industry legends, Onion may be the world’s most famous custom knifemaker and has designed any number of knives for CRKT and other knife companies. A card-carrying member of knife industry legends, Holder has made knives since the 1970s and served as president of the Guild for a number of years and has worked closely with AKTI.
Glesser’s Spyderco has set sporting knife industry standards in introducing and/or popularizing such knife features as the hole in the blade for easy opening, pocket clips and serrated edges. Sal also has worked closely with AKTI.
Knife industry legends abound at the BLADE Show. Ernest Emerson not only is famous for his CQC-6 and CQC-7 folders but also for teaching self-defense courses to military and law enforcement officials worldwide.
Stop by and see J. Neilson of Forged In Fire for the latest on television’s hottest show on knifemaking. Visit with knifemaker Steve Johnson, who worked in the shop of the legendary Bob Loveless for several years and is now one of the world’s leading custom knifemakers. Talk to Al Pendray, the “Wizard of Wootz,” who rediscovered the method of making the centuries-old steel.
KNIFE INDUSTRY LEGENDS: Tony Bose, the world’s leading maker of custom slip joints and multi-blades. (Kerry Hampton image)
See the knives of Tony Bose, the world’s leading maker of custom slip joints and multi-blades. Talk to BLADE® Magazine field editors Kim Breed, Joe Szilaski and Ed Fowler. Hang out at the booths of CRKT, Spartan Blades, Spyderco, Kershaw and hundreds of others.
You never know what knife industry legends might stop by to visit with them—and much, much more, all at the 35th Annual BLADE Show.
