The BLADE Blog w/Steve Shackleford

Knives, knife people, knife news, knife use, knife collecting, knifemakers, knife events, the BLADE Show, BLADE Magazine, and more.

Navy SEAL’s Super Bolo!

Nearly 20 years later and with my original bolo in disrepair, I thought it time to replace it with an updated and more technologically sophisticated design. My goal was to find a knifemaker from my home state of Kentucky who would be capable and willing to collaborate on the project. It was not long before several members of the Knifemakers’ Guild recommended Gene Baskett. A Guild member since 1981, Gene has proved to be one of Kentucky’s finest custom knifemakers and has earned the respect of his peers for the quality work he produces.

He and I based the knife’s design on the old bolo I had used when I served in the SEALs. Our decision was to go with CPM-154 stainless steel, and Gene made several blade adjustments. We experimented with a rubber handle made from extremely durable horse matting material—a perfect Bluegrass State touch, and a substance also favored by a number of makers and contestants in the cutting competitions. The resulting grip is firm yet shock absorbing. The handle can also be securely grasped when wet. My concerns were simple: durability and performance. I wanted a knife that would withstand a heavy amount of punishment and still perform well.

Both Gene and I agree that the knife has exceeded our expectations. Its cutting ability is just plain scary. Without honing the original edge applied by Gene, I put the knife to the test. He already had whacked through 1-inch saplings, and still the blade was gliding through blades of grass and straw. My test consisted of saplings, 1-inch tree branches and wild grape vines. All were easily severed with one clean hit.

After 20-to-30 strikes on branches and vines, I moved on to a grass mat wrap 4 inches in diameter. The grass mat was wrapped tightly around a 1-inch piece of dried bamboo. One diagonal strike went completely through. I finished the test with a piece of quarter-inch tanned cowhide. With only slight pressure, the bolo sank through the hide from tip to handle. Drawing the blade out and away left a clean, effortless cut through 8 inches of hide. The blade was still quite sharp afterward.—BY STEVE WATKINS, retired Navy SEAL

For the complete story on the author’s super bolo, you can get the digital version of the December BLADE® by clicking on http://www.shopblade.com/blade-dec-2012-digital-issue?lid=SSfbbl101612

PICTURE CAPTIONS, FROM TOP

TOP: At top is the author’s old bolo and leather sheath and below it is Gene Baskett’s Super Bolo and Kydex® sheath. (photo courtesy of Steve Watkins)

MIDDLE: One of the instructors near the author’s duty station in the Philippines circa 1990 splits wood with the author’s old bolo. (photo courtesy of Steve Watkins)

BOTTOM: The author (right) and his friend, Brad O’Neill, on patrol circa 1990. The author is shown holding an M-60 (7.62mm) and his friend an M-16 with an M-203 (a 40mm grenade launcher). (photo courtesy of Steve Watkins)

SGT. DAKOTA MEYER’S KNIFE

In recognition of his military actions in Afghanistan on behalf of his fellow servicemen and his country that resulted in his receiving the Congressional Medal of Honor, U.S. Army Sgt. Dakota Meyer was presented with a custom knife made by Gene Baskett, a custom AR-15 rifle, and honorary membership in the Knifemakers’ Guild.

    During a special ceremony this past December in Elizabethtown, Kentucky, Baskett, formerly of Elizabethtown and now of Eastview, Kentucky, presented Sgt. Meyer with a Baskett handmade knife, a custom fighter with a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side and “8 September 2009, Kunar Province Afghanistan” on the flip side. The engraving is by Patrick Clark of Clark Jewelers, also of Elizabethtown. Richardson Gunsmithing did the Moly Coating.

    In all, Baskett said he got to spend about three hours with Sgt. Meyer the day of the presentations. “He really loved the knife,” Baskett observed. “He was really appreciative and seemed very humbled by it all.”

    J.J. Akins and Steve Sprowls of Elizabethtown’s Sporter Express gun shop presented Sgt. Meyer with the custom-engraved rifle. The gun is engraved “Rifle presented by the citizens of Hardin County, KY. Sergeant Dakota Meyer, USMC. 8 September 2009. Kunar Province Afghanistan. Congressional Medal of Honor,” and was donated by Sporter Express.

    A member of the Guild’s board of directors, Baskett also presented Sgt. Meyer with a custom Guild honorary membership badge that includes the worlds “Medal of Honor Recipient” and the Marine Corps emblem.

ACTS OF HEROISM

Sgt. Meyer was born and raised in Columbia, Kentucky. He entered the Marine Corps after high school in 2006. On Sept. 8, 2009, Sgt. Meyer, then a corporal, was credited with numerous acts of heroism and saving the lives of several Marines in a battle near the village of Ganjgal in Afghanistan (see sidebar, page ???). As a result, Meyer was awarded the Medal of Honor in a ceremony at the White House on Sept. 15, 2011.

    Sgt. Meyer spoke to a small crowd and the media during the ceremony in Elizabethtown, saying he does not consider himself a hero and that the Medal of Honor and what it represents is much bigger than him. His actions on “the worst day of my life” may have saved several fellow Marines, though he said he could not save four of his close friends in his unit. He wears a bracelet bearing their names.

    The Americans who died in the ambush were: 1st Lt. Michael Johnson, 25, Virginia Beach, Virginia; Staff Sgt. Aaron Kenefick, 30, Roswell, Georgia; Hospital Corpsman Third Class James R. Layton, 22, Riverbank, California; and Gunnery Sergeant Edwin Wayne Johnson Jr., 31, Columbus, Georgia. A fifth soldier, Army Sgt. 1st Class Kenneth W. Westbrook, 41, Shiprock, New Mexico, later died from his wounds.

    Sgt. Meyer received the Medal of Honor in a ceremony at the White House on Sept. 15, 2011. When a White House staffer contacted him to arrange the ceremony, Sgt. Meyer famously asked to “have a beer with the President.” Sgt. Meyer received an invitation to the White House the afternoon before the ceremony (see sidebar, page ???). He also requested that when he was honored, simultaneous services should be held at other applicable locations to honor the memory of his fellow service members who died or were mortally wounded during the ambush and his rescue attempts.

    Sgt. Meyer is the third living recipient of the Medal of Honor since the Vietnam War, and the first living Marine in 38 years to be so honored. In addition to the Medal of Honor, he also received the Purple Heart, Navy Commendation Medal w/Combat V, the Navy Achievement Medal and the Combat Action Ribbon during his years of service from 2006-2010.

MILLION DOLLAR CHALLENGE

Sgt. Meyer uses his fame to raise money to provide college scholarships to the childen of those soldiers who did not survive the war. His goal is to raise $1 million for his “Million Dollar Challenge” (see sidebar, page ???). During the presentation ceremony, Sporter Express presented a check for $750 toward that goal.—BY MIKE CARTER

For more information on the Million Dollar Challenge, visit www.dakotameyer.com. For more on Gene Baskett knives, contact Gene Baskett, Dept. BL12, 427 Sutzer Ck. Rd., Eastview, KY 42732 270-862-5019 www.baskettknives.com.

To stay abreast of the latest in knives and knife information, subscribe to BLADE® at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101212

Keeping Up With Dakota Meyer

It is not often a living U.S. Marine receives the Congressional Medal of Honor, and Sgt. Dakota Meyer is the first one to do so in 38 years. Neither is he one to rest on his laurels.

    For instance, he has partnered with the Marine Corps Scholarship Foundation (MCSF) to raise money so the children of Marines can attend college. Sgt. Meyer said he realizes the importance of education and believes in the MCSF motto, “Honoring Marines by Educating Their Children.” The Dakota Meyer Scholarship Initiative was established and Sgt. Meyer committed to personally raising a million dollars to fund the effort. In fact, during the MCSF’s 50th anniversary celebration this past spring, it was announced that he had successfully reached his goal of raising a million dollars. The Challenge to America to match the million dollars Sgt. Meyer raised is ongoing. To learn more about it and to make a donation visit www.dakotameyer.com

    He indicated he was honored President Obama accepted his invitation to have a beer the afternoon before the Medal of Honor ceremony. (As a side note, Sgt. Meyer said the White House brews its own beer, a honey ale, which he said both he and the president enjoyed.) He added he appreciated the opportunity to speak with and ask advice from the president. The president emphasized the importance of education, a priority Sgt. Meyer shares. In fact, Sgt. Meyer said he hopes to continue his education when his travel schedule slows down.

    Meanwhile, he spends much of his time on the road, traveling all over America to share the story of his fallen brothers. He also advocates for veterans and has recently partnered with the U.S. Chamber of Commerce and Toyota on the Hiring Our Heroes campaign, which provides jobs fairs for veterans nationwide, as well as training veterans to successfully make the transition from military to civilian employment. At press time, Sgt. Meyer’s book Into the Fire was slated to be published this September.

Above and Beyond The Call

 According to Dakota Meyer’s citation for the Medal of Honor, he was recognized, “For conspicuous gallantry and intrepidity at the repeated risk of his life above and beyond the call of duty as a member of Marine Embedded Training Team 2-8, Regional Corps Advisory Command 3-7, in Kunar Province, Afghanistan, on 8 September 2009.

    “When the forward element of his combat team began to be hit by intense fire from roughly 50 Taliban insurgents dug in and concealed on the slopes above Ganjgal village, [then] Corporal Meyer mounted a gun-truck, enlisted a fellow Marine to drive, and raced to attack the ambushers and aid the trapped Marines and Afghan soldiers. During a six-hour firefight, Corporal Meyer single-handedly turned the tide of the battle, saved 36 Marines and soldiers and recovered the bodies of his fallen brothers.

    “Four separate times he fought the kilometer up into the heart of a deadly U-shaped ambush. During the fight he killed at least eight Taliban, personally evacuated 12 friendly wounded, and provided cover for another 24 Marines and soldiers to escape likely death at the hands of a numerically superior and determined foe.

    “On his first foray his lone vehicle drew machine gun, mortar, rocket grenade and small arms fire while he rescued five wounded soldiers. His second attack disrupted the enemy’s ambush and he evacuated four more wounded Marines. Switching to another gun-truck because his was too damaged, they again sped in for a third time, and as turret gunner he killed several Taliban attackers at point blank range and suppressed enemy fire so 24 Marines and soldiers could break out.

    “Despite being wounded, he made a fourth attack with three others to search for missing team members. Nearly surrounded and under heavy fire, he dismounted the vehicle and searched house-to-house to recover the bodies of his fallen team members. By his extraordinary heroism, presence of mind amidst chaos and death, and unselfish devotion to his comrades in the face of great danger, Corporal Meyer reflected great credit upon himself and upheld the highest traditions of the Marine Corps and the United States Naval Service.”

 

TOP PHOTO AND SECOND PHOTO FROM TOP

Congressional Medal-of-Honor recipient Sgt. Dakota L. Meyer recently was presented with a Gene Baskett handmade knife. The custom fighter has a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side. The engraving is by Patrick Clark. Richardson Gunsmithing did the Moly Coat. (photo of Sgt. Meyer courtesy of the United States Marine Corps; knife photo by Mike Carter)

 

Veteran Knifemaker Ted Dowell Passes Away

 

Ted Dowell, long-time knifemaker, past Knifemakers’ Guild president and popularizer of the integral knife design, passed away Oct. 5.

    In a statement, Blade Magazine Cutlery Hall-Of-Fame© member and current Guild president Gil Hibben noted, “It is with a heavy heart that I report the passing of my friend and Knifemakers’ Guild Founding Member and Past President, Ted Dowell. Our hearts go out to his family and especially to his beloved wife, Betty. As soon as I know the arrangements and details I will post them. Ted was a true pioneer of the KMG and a great master knifemaker. He will be deeply missed.

   Also known for his “Funny Folder” design, among many others, Dowell was the only Guild member to exhibit at every Guild Show—40 in all—until the streak came to an end in 2010, Betty always by his side, smiling and flying the “Dowell banner.”

    According to Hibben, the family of Ted Dowell has requested that in lieu of flowers, a donation be made to the Knifemakers’ Guild (www.knifemakersguild.com) in Ted’s memory. “Ted truly loved the Guild, and the Dowell family’s request reflects that love,” Hibben added.

    To stay abreast of the latest in knives and knife information, subscribe to BLADE at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101012

Viking “Ulfberht” Sword Stars on Nova Tonight

Watch Nova on PBS tonight as Ric Furrer takes you through the creation of the legendary Viking sword known as the “Ulfberht.”

    Specializing in the forging/making of steel via the ancient methods, Furrer has conducted seminars and demonstrations on how to make steel from sand at a number of venues, including the Batson Bladesmithing Symposium at the Tannehill Ironworks in McCalla, Alabama.

    Little is known for sure about the legendary Ulfberht sword. Believed to have been made somewhere around the 10th century, the Ulfberht is described thus by the late Hank Reinhardt (pictured above in a photograph by Patrick Gibbs at a past DragonCon event) in his The Book of Swords:

    “Sometime early in the 10th century, the ability to produce a large enough bloom of steel to make a full sword was developed … [The resulting] steel swords also had a slightly different shape [than their predecessors]. Instead of the edges being parallel, there was a defined slope to the point. The point was still rounded but the slope put weight closer to the hand, thereby making them somewhat quicker on the stroke and on the return. These new swords all had the name ‘Ulfberht’ engraved on the blades. It’s fun to speculate how this sword was developed and who this person was.”

    For more on tonight’s program, click on http://www.pbs.org/wgbh/nova/ancient/secrets-viking-sword.html

    For more on the latest in everything that cuts, subscribe to BLADE®. For subscription info, click on http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101012

NEW BLADE ON NEWSSTANDS TODAY!

    What do many of today’s custom tactical folders have in common? Find out in the latest issue of BLADE® Magazine, on most newsstands TODAY!

    Featuring the DMF tactical folder by Sniper Bladeworks on the cover, the World’s No. 1 Knife Publication covers the globe’s sharpest knives from all angles, including:

    •A special 25th anniversary salute to the Sebenza by Chris Reeve Knives, one of the most influential folders in modern knife history;

    •Part one of a two-part story on how to polish a Japanese sword by sword guru Leon Kapp;

    •The top annual knives of the American Bladesmith Society as determined at the 2012 BLADE Show (www.blademag.com);

    •A rundown of the latest and greatest factory hunting knives;

    •A profile of one of Brazil’s hottest knifemakers, Gus Cecchini;

    •BLADE field editor and ABS master smith Wayne Goddard’s four shop tips and quick fixes covering grinders, drill-bit sharpening, holes in hard tangs and more;

    •A short history of the K.I.S.S., the knife that helped make Columbia River Knife & Tool a major player on the world knife stage;

    •And all the latest in everyday carry knives, the results from the 10th Annual BLADE Show World Championship Cutting Competition, a test of A.G. Russell’s “Super Storm Knife” and much, much more.

    For information on how to subscribe to BLADE, click on http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl100912

The Hunter’s Edge: 3 Hot Fixed Blades

You can’t beat fixed blades for down-and-dirty, heavy-duty hunting knife use, and three hot factory examples from ShopBlade are more than ready for the woods.

    Designed for fish and small game, the Buck 102BR Woodsman (second from top) boasts old-time Buck styling in an affordable ShopBlade price of $39.99. Overall length: 7.75. inches.

    For more click on www.shopblade.com/buck-102br-woodsman-knife-y4511?lid=SSfbbl100912

    The Medium Hunter “O” Style (third from top) by Scagel Knives features a 5.5-inch blade of A2 tool steel heat treated to 58 HRC. Sporting the convex grind—the favorite grind of Blade Magazine Cutlery Hall-Of-Fame© member Bill Moran—the blade is designed for all types of hunting uses.

    For more click on www.shopblade.com/scagel-design-knives-medium-hunter-o?lid=SSfbbl100912

    Speaking of Moran, Spyderco’s Bill Moran upswept hunter (top) boasts a VG-10 stainless blade and a comfy palm swell handle of fiberglass-reinforced nylon (FRN) at a ShopBlade price of $99.96. For out-of-the-box sharpness, this one is hard to beat.

     For more click on www.shopblade.com/bill-moran-black-frn-w-kraton-inlay-upswept-plainedge-w8522?lid=SSfbbl100912

Win a Young Knife at Cal Knife Show Oct. 6-7

Meet some of the world’s leading custom knifemakers at Dan and Pam Delavan’s California Custom Knife Show tomorrow and Sunday, Oct. 6-7, in Anaheim.

    While there, enter to win the repro of a Bob Loveless New York Special by John Young (see accompanying picture). The drawing will be the Sunday of the show.

    In addition to Young, other exhibiting makers will include Ernest Emerson, Rick Hinderer, Les George, Jason Brous, Kirby Lambert, Blade Magazine Cutlery Hall-Of-Fame© member D’ Holder, Darrel Ralph, Bill Ruple, Brian Tighe, Daniel Winkler and many more.

    Held at the Embassy Suites of Garden Grove/Anaheim South, the show will run 10 a.m. to 4 p.m. both days.

    For more info click on http://www.plazacutlery.com/PLAZAcutleryKnifeSHOW2011.htm

 

For the latest knives, knife trends, knifemakers, what knives to buy and where, knife legislation, knifemaking instruction, and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?lid=blss100512

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement