The BLADE Blog w/Steve Shackleford

Knives, knife people, knife news, knife use, knife collecting, knifemakers, knife events, the BLADE Show, BLADE Magazine, and more.

Knives Of Summer: Keep Those Puppies Sharp!

When you use one of our “Knives Of Summer,” you will need to sharpen that puppy. In fact, a little edge maintenance after each use—when feasible—is the best way to keep your knife sharp for the next time you need it.

    GATCO’s Natural Arkansas Sharpening Kit is a great way to keep your edges keen at all times. Designed for sporting, kitchen and other knives, it features a novaculite stone mined from Arkansas. The kit includes a block-mounted 5-inch stone for sharpening, a 3-inch stone for final touch-ups, honing oil and a storage case.

For more info click on http://www.shopblade.com/gatco-natural-arkansas-sharpening-kit-80005/?r+ssfb070912.

Build a Knife From The Latest Knife Kits

Knife kits have helped launch more than a few of the careers of today’s custom knifemakers, and have been well-documented in BLADE® (www.blademag.com) and elsewhere. The competition among knife kit companies continues to be keen and, largely as a result, the variety and quality of the kits has never been better.

    The top kits provide most of the components of the folder or sheath knife, including blade, handle materials, pins, springs, bolsters, even glue for the final phase of the construction project. Many knifemaking suppliers offer kits with skill levels ranging from basic to advanced, and shop tool requirements, affordable prices, and even instructions to guide you from start to finish. Blade steels vary from carbon to stainless and damascus options, while handle materials run the gamut from G-10 and other synthetics to various woods, stag or horn.

    “We do our own cryogenic blade treating, and that’s an advantage for our kits,” related Lance Reid, manager of Texas Knifemakers Supply. “We have a lot of kits available, and they’re very popular right now because they allow you to express your own artistic ability and influences. LinerLock™, lockback, slip joint and trapper kits are all selling well, and the tools needed for them are generally a belt sander, drill press, buffer and ball-pein hammer.”

    The Judge’s Favorite hunter kit (pictured above) is one of the hottest at Texas Knifemakers Supply (TKS). Retailing for $36.45, the kit includes a 4-inch blade of cryogenically treated 6A stainless steel, a Dymondwood™ handle in a choice of more than 30 colors, and 30-minute epoxy to set the knife for use. The Sam Houston Skinner kit has an MSRP of $30.45 and comes complete with a 3 5/8-inch blade of 6A stainless with a slightly dropped point, Dymondwood handle, brass pins, and epoxy.

    TKS offers beginner, medium and advanced kits. Beginner kits include premade guards and bolsters, and requirements are simple assembly, grinding and shaping. Medium-skill kits involve the shaping of the guard and bolster, while advanced assembly requires the maker to fabricate the guard and bolster.

 

BEGINNER TO ADVANCED

Jantz Supply’s latest knife-kit entry is a new line of handles for its U.S.-made pattern blades. The preshaped and contoured handles crafted from G-10, Micarta® and Dymondwood include a variety of textures, and enable enthusiasts at all levels to choose their favorite handle material, color and texture, along with the guards and screws. “Our pattern blades are manufactured from tool steels, including D-2, and stainless steels such as CPM-S30V, 154CM and 440C,” Ken Jantz noted.

    By offering fixed-blade kits, Jantz affords beginners an opportunity to learn the basics of knifemaking without the hassle of moving parts and the requirements of close-tolerance fittings. Kit components require only basic tools such as rasps, files and hammers, and the final knife can be completed with hand sanding and finishing.

    “Beginners like the kit concept because it provides them with a strong foundation and process for creating a solid, high-quality knife they can be proud of when finished,” Jantz said. “Advanced [enthusiasts] like the ability to customize basic knife kits, showing off their personal creativity and ability to take something standard to an entirely different level. In the hands of someone who knows what they are doing, a kit knife can be truly special.”

    Jantz provides beginners and advanced enthusiasts alike many customizable components, unusual materials and opportunities for personal inspiration in the creation and personalization of their fixed kit blades. 

    When asked about his company’s most recent improvements in folder kits, Jantz stated the availability of the thrust ball bearing in 440C stainless designed by custom maker Gustavo T. Cecchini of GTC Knives brings a new level of quality customization options to knife kits. The bearings are built to provide motion with minimal friction and a smoother action.

 

PERIOD ORIENTED

“Our knife kits are oriented toward the long hunter and pre-1840 style, and we have only fixed-blade kits,” advised Rex Reddick of Texas-based Crazy Crow Trading Post. “We sell a lot of knifemaking supplies and have been importing blades from Solingen, Germany, since about 1980.

    “Our Rocky Mountain Drop Point in either carbon or stainless steel comes with black walnut handle scales and brass rods for rivets,” Rex continued. “It sells for $17.95 and $19.95, depending on the blade steel.”

    Other kits of choice from Crazy Crow include the Green River series, which features seven different combinations ranging in manufacturer’s suggested retail prices (MSRPs) of $14.95 to $20. The bowie kit retails for $56 and includes a 6-inch carbon steel Solingen blade and curly maple handle material. Patch knife kits for muzzleloader enthusiasts retail for $14.95.

    “We are putting bone scales in some of the kits now,” Reddick said, “and the kits are new this year and also available with curly maple or walnut. The kits are pretty simple. Basically, you drill the scales and glue them with epoxy and hammer the rivets in, drilling the countersink. You need basic tools to put them together, something like a coping saw to saw out the blade blanks. The handle scales come in rectangular form, so a rasp might be needed to file them down if you want to put some taper on the edges.”

 

DRIVING KIT SALES

At Knifekits.com, the designs of Darrel Ralph are driving kit sales, and the company’s hottest folder going is the SS 2.0 Super Squirt (MSRP: $39.95). “This manual button-lock folder can be built as a standard manual release or converted to automatic by simple modification,” explained Steven Andrews, Knifekits.com general manager. “These are very popular for kit builders who like small folders or who reside in automatic-legal areas, especially those who are engaged in jobs that permit or require automatic carry.”

    The AUS8 Super Squirt blade is 2 inches long and available in a black or satin finish. Handle scales are black G-10 or carbon fiber but are not included in the kit. They are premilled and require a simple finish option with basic handwork. The hottest fixed-blade kit from Knifekits.com is the Clip Point Skinner (MSRP: $17.95) available with a stainless or brass guard. The hollow-ground, satin-finished blade is AUS8 stainless. Handle material is not included.

    “Both knives are skill level 1-to-2 for basic construction,” Andrews added. “We would not hesitate to recommend these kits to entry-level builders as well as advanced builders. The fit, finish and precision on these models are unsurpassed in their genre. For the basic build on the SS 2.0 folder kit, the No. 6 and No. 8 Torx wrench tools and medium or fine sandpaper are the only tools required. For a basic build on the fixed blade, a peining hammer, a drill bit for creating the handle recess, and sanding materials are sufficient. Epoxy is also recommended for secure, gap-free handle mounting.”—by Mike Haskew

 

Editor’s note: In the case of Knifekits.com’s Super Squirt, which can be converted to an automatic by simple modification, be sure to check the laws in your area concerning automatic knives.

 

 For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb070412 for more information.

 

Knives Of Summer: Make Mine a Machete

Vines, shrubs, leaves, bushes, etc., overgrowing your campsite or just your yard? Check out the Gerber Gator Machete.

    It sports a 15-inch blade and a 15-inch sawback for extra-tough cutting jobs. A rubber grip is designed for control and a nylon sheath is included. Overall length: 25.7 inches. ShopBlade’s price: $19.99.

    For more information click on http://www.shopblade.com/gerber-gator-machete-w-sheath-y6980/?r+ssfb070212

Knives Of Summer: Timberline Alaskan Bush Pilot Hatchet

Summer means camping and camping requires lots of chopping jobs for such handy pieces as the Alaskan Bush Pilot Hatchet from Timberline.

    Designed by custom knifemaker Russ Kommer, the hatchet features a 440 stainless steel blade in a satin finish and a finger-grooved haft covered with Zytel slabs. Overall length: 9 inches. Weight: 3 pounds. It comes with a bridle leather sheath and a non-slip belt loop.

    For more info on the Timberline Alaskan Bush Pilot Hatchet click on http://www.shopblade.com/timberline-bush-pilot-survival-hatchet-6013/?r+ssfb062712

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb062712 for more information.

SOG Collaborates on Video Game Tomahawk


SOG (www.sogknives.com) has partnered with Electronic Arts, a global leader in digital interactive entertainment, to develop the Voodoo Hawk, a tomahawk weapon designed specifically for the video game Medal of Honor™ Warfighter.
 
     The Voodoo Hawk (http://sogknives.com/store/F18-N.html), a combination of SOG’s Tactical Tomahawk and FastHawk weapons, was designed by SOG, game designers and U.S. Tier 1 Operators, the creators of the Medal of Honor series, to provide game players with an authentic warfare experience.
 
     A limited-edition version of the Voodoo Hawk, which includes custom engraving, SOG patch, and special sheath (http://sogknives.com/store/F18LTD.html), will go on sale this October, in conjunction with the launch of Medal of Honor Warfighter. The Voodoo Hawk is made with a 420 stainless steel head, weighs 24 ounces and has a glass-reinforced nylon handle. Overall length is 12.56” and has a cutting edge of 3.5”.
 
     Proceeds from sales of the Limited Edition Voodoo Hawk will be donated to Project HONOR (http://www.medalofhonor.com/project-honor), an initiative launched by Electronic Arts to benefit the NAVY SEAL Foundation, the Special Operations Warriors Foundation, and other charities.  The Voodoo Hawk and the Limited Edition Voodoo Hawk will retail for $75.00 and $100.00, respectively.  Only 500 Limited Edition Voodoo Hawks will be sold.    
 

    “We were honored to be asked by the Medal of Honor producers to work with them in creating a unique weapon specifically for this game,” says Nando Zucchi, VP of Marketing for SOG.  “The Medal of Honor series dedication to accuracy in portrayal of the equipment and weaponry used in their game is incredible. The producers of the game felt that SOG had to be included in Warfighter in order to meet their standard of authenticity. We are delighted to be a part of this franchise and to work with Electronic Arts to benefit the Project HONOR foundation.”
 
     Medal of Honor WarFighter, which is the latest video game from the Medal of Honor series, was written by U.S. Tier 1 Operators and will be released for PC, Xbox 360, and PlayStation 3 on Oct. 23.  In addition to the Voodoo Hawk, the SOG Ops Black TiNi belt knife and SOG PowerLock EOD Black Oxide Multi-Tool are also featured in the game.  

    SOG Specialty Knives and Tools are sold nationwide.  To find a dealer in your area or to learn more about SOG visit www.sogknives.com.   

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb062612 for more information.

Get In On The Knives of Summer!

Summer’s here and so are all the hot things there are to do during it—many of which call for one of the sharp knives in our “Knives Of Summer” feature.

     Among the things that make summer so much fun is fishing, not to mention eating a nice grilled or fried fillet afterward. Before you cook your catch you have to fillet it, and the Big Eddy from CRKT is ideal for the job. The 420J2 stainless blade features Russ Kommer’s high hollow grind, which creates an air pocket to lift and “float” fillets off, while the flat taper ground side glides smoothly across the skin. Triple-Point Serrations help you cut through gristle, bones and fins. A Kraton grip offers a firm, safe hold on the knife.

     For more on how to get your Big Eddy, click on http://www.shopblade.com/big-eddy-3008?r+ssfb062512

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb062512 for more information.

High In The Necking Order

An Alan Folts design, the Columbia River Knife & Tool Minimalist Tanto features a 2.125-inch blade of 5Cr15MoV stainless with a Rockwell hardness of 55-57 HRC. Weight: 1.6 ounces. Overall length: 5.13 inches. MSRP: $34.99 (includes A glass-filled nylon sheath, neck paracord and braided fob). (CRKT photo)

The latest factory neck knives are a smorgasbord of designs and carry options

“When neck knives are designed and made properly, they will be minimal in size, yet easy and comfortable to use. They will be light enough around the neck to not be bothersome or noticeable [and] will be held safely and securely upside down in their sheath, but can be drawn and put into action with a minimum of effort.”

    The preceding words by ABS master smith Murray Carter accurately and succinctly capture the finer qualities of neck knives, a subject Carter knows a thing or two about since he forges nearly 40 varieties. Along with the growing popularity of knives specifically designed for this carry system, the offerings by knife manufacturers are also expanding to meet the demand, and like many factory-produced blades today, the quality of the finished product is increasingly excellent.

    If you happen to be in the market for a small, multi-use utility neck knife, then the Boker Plus Gnome fits the bill. The full-tang design is 4 inches overall, which is somewhat smaller than most neck knives, and the 2 1/8-inch blade of 12C27 stainless steel is relatively thin to enhance cutting ability. The Micarta® handle is equipped with a hole for a lanyard.

    “On a knife this small, weight is generally not an issue, and the lanyard hole does help the knife’s balance,” noted Terry Trahan, Boker USA product specialist. “The Micarta with the unique handle design’s deep choil-like area and lanyard all work together to provide a good grip.”

    The design is a collaboration between Boker Plus and Danish maker Jesper Voxnaes. The knife also is available in a stag handle, and comes with a leather belt sheath.

Female LEO Feedback

5.11 Tactical (see April 2011 BLADE®*) has introduced a new necker to its growing family of knives. Consistent with the company’s approach to knife designs, this one also grew out of feedback from customers.

    “We had a meeting of all female law enforcement officers, which was the first time we had women only at one of these meetings,” said Mike McCourt, business leader for 5.11’s knife program.  “The female officers requested a personal defense, last-ditch knife that could be worn around the neck or behind a belt.”

    The resulting effort is the “SidePick Spearpoint,” which has a 2-inch blade of AUS-8 stainless steel and choices of a plain or 50-50 plain/serrated edge. The textured FRN scales are removable. The back edge can be sharpened (though be sure to check the laws in your area for double-edged knives). MSRP: $59.99.

    “The composite sheath comes with an adjustable boot/belt clip and adapter that allow for a total of 12 carry angles,” McCourt noted. “There’s also an ankle strap for extra security during boot carry, and for neck carry it has a black beaded breakaway chain.” A breakaway chain prevents injury and even strangulation should it be grasped in a struggle or catch on something.

“A Pure Necker”

Nemesis Knives offers four different neck knives, including the new “Afterburner.”

    “The Afterburner’s 2.25-inch blade fills a gap between our 1 5/8- and 2-inch models and, unlike our other neck knives which can be carried numerous ways, the Afterburner is a pure necker in the sense that there are no other carry options,” noted Nemesis headman and the knife’s designer, Jeff Hall. “I’ve been thinking about the design for a long time, so it has been two or three years in the making.”

    The knife is 5.25 inches overall with a blade of 9Cr13 stainless in a satin or black finish. A bead chain and Kydex® sheath are included.

    “Our customers wanted a beefier small fixed blade, so unlike many other neck knives, which are only 1/8 inch thick, the Afterburner is 3/16 inch thick,” Hall said. “It’s also full machined inside and out, and all the holes and corners are CNC-machine countersunk and chamfered.” The knife features skeleton construction to reduce weight, and thumb ramp ridges for added traction in various grips. Tentative MSRP: $49.95. 

Church-Key Design

To hear Mike Manrose of Meyerco tell it, the company’s “Besh Wedge Bottle Rocket” designed by Brent Beshara seems to be a multi-collaboration of sorts.

    “It started off as Dirk Pinkerton’s Variable Broadhead neck knife and Brent added the BESH Wedge geometry, while also lengthening the knife out,” Manrose said. (Author’s note: The BESH Wedge is two diagonally opposed bevels converging to create a third edge [see October 2010 BLADE*]). In other words, what you have is a bottle opener and a handy box cutter. “The knife is a great utility piece as well as a very usable backup weapon,” Manrose said. “It is based on an age-old church key design.”

    The origin of church key is unknown to me, but the term brings to mind various bottle/can openers worn around the neck on youthful trips to the beach with a hoard of guys toting coolers full of beer. Apparently that memory is not far off the mark, as I discovered when I asked Beshara what the knife is designed to do.

    “It is a beer-drinking tool which opens bottles and cans,” he grinned. “The handle is the bottle opener, and the front has a BESH Wedge, which is unsharpened due to the nature of the tool, and the reinforced tip easily opens can tabs.”

    The Bottle Rocket’s 2.5-inch blade is 7Cr17 stainless (according to Manrose, an equivalent of 440A). Overall length: 5 inches. It comes with a sheath and neck chain. “The sheath is glass-filled nylon, which is tough as nails,” Manrose said. “We put a detent ball in it so you can spin it on a smooth surface for who buys the next round. It will serve you well for a long time as a utility piece, bottle opener, backup—and it’s just cool!”

    While nodding my head in mute admiration, I asked Manrose to expand on the “spin” feature.

    “Another age-old tool from the Roman era,” he chuckled.  “An old sailor’s game I picked up along the way,” added Beshara. The MSRP is $29.99 and the piece comes with the words “Cheers! Besh” aptly engraved on the reverse side.

Added Considerations

Given today’s available neck knife choices, opting to wear one involves making decisions that include purpose, size, materials, design, or just about anything else you would consider when choosing a fixed blade, with the provision that the overall length will be naturally limited.

    I have worn a necker regularly for some time in perhaps the most common form—handle down in a Kydex sheath. It is easy enough to access under a shirt with the button closest to the handle open, though I exercise great care returning the blade to the sheath for reasons equally divided between my intense dislike of pain and a deep fear of embarrassment were I to stab myself in the chest.  Along with using caution in re-sheathing, it is also important to remember a general rule of thumb: Any fixed blade may be considered “concealed” for legal purposes, so it is good to be familiar with pertinent state and local regulations.—by Stephen Garger

For information on how to get a wharncliffe-blade version of CRKT’s Alan Folts Minimalist, click on http://www.shopblade.com/folts-minimalist-2385?r+ssfb062112

 

For a profile of 5.11 Tactical, the BESH Wedge story and other articles, nearly 300 past issues of BLADE® are available in two separate DVDs. Visit http://www.shopblade.com/category/cds-dvds-videos?r+ssfb062112 or call 855-278-0406 and mention the First 25 Years Of BLADE DVD collection (1973-1997), or the BLADE 1997-2007 DVD.

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb062112 for more information.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement