Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.
The New Rescuehawk From White River Knife & Tool Is An Excellent Fixed-Blade Multi-Tool That Will Make Any Outdoorsman Happy.
Not every multi-tool folds up and fits in your pocket, and that’s a good thing. For someone looking for a more robust multi-tool, the new tactical Rescuehawk from White River Knife & Tool is exactly what you’re looking for.
Made from quarter-inch thick 80CRV2 steel, and designed by Kurt Delia, the Rescuehawk does a little of everything. The head features a 2.6-inch splitting edge with a strong piercing point horn on the opposite end.
The handle is incredibly versatile with a half-inch gas line channel wrench and split chisel pry point and textured G10 handle scales to provide excellent grip. The included bottom-eject Kydex sheath keeps the blade safe and secure in transit.
Overall, this tool is excellent for any outdoor lover and is great to have in case of an emergency or survival situation.
We Take A Look Inside The Shop Of ABS Master Smith Steve Schwarzer And See How He Makes His Mosaic Damascus Wonders
Of all the forgers of mosaic damascus in the knife industry, none stand out any more than American Bladesmith Society Master Smith Steve Schwarzer.
Steve began forging in the early 1970s. In 1981 he received his ABS master smith rating, his papers signed by none other than one of four ABS founders/BLADE Magazine Cutlery Hall-Of-Fame® member Bill Moran, and was officially recognized as an MS in 1983. Steve has an intense passion for forging mosaic damascus and his contribution to this steel niche over the decades has been immeasurable. Unselfish to the extreme, he has forged damascus for many custom makers and tutored many on forging and the making of pattern-welded steel over the years—which he continues to do to this day.
His awards over 50 years of knifemaking are too numerous to name, as have his appearances in BLADE®. BLADE is delighted to feature Steve once again, this time in a supersized edition of “Shop Dump” to give readers a deep dive into the equipment this modern-day master uses to achieve his magical works.
Inside Steve’s Shop
Steve rescued his Kent USA precision surface grinder from a knifemaker friend. In the process of retrieving it, Steve almost destroyed it while loading it. However, another friend restored it to better than new.
As you can imagine, Steve has acquired a lot of equipment over his many years of knifemaking and has honed his shop to perfection. We asked the artisan to give us an extended tour of his digs and he gladly obliged. He kicked the tour off with his forging hammer.
“The Chambersburg 2 Hammer was my first real game changer,” Steve notes. “I had owned several mechanical hammers before I found it. The control in forging set me apart from others. It also allowed me to work much larger masses of damascus. I have trained dozens of the current top makers pattern welding using this machine. I built my second shop around it. It’s now in my home shop.
“Next up is my custom-built 50-ton Coal Works computer-assisted C Frame press. This is a recent acquisition and is also a game changer for controlled forging. It has a return to 1/100 of an inch. Basically, it comes with millions of electronic stop blocks. It has the ability to swap dies to any configuration in minutes. I have built many presses over the years; this one has all the benefits and adaptability afforded by all the others combined. I worked very closely with the crew at Coal Iron to bring this beast to life. I’m still exploring its capabilities.”
Grinders are a must-have of any maker’s shop and Schwarzer has a passel of them.
“I own four Beaumont grinders—one for over 20 years—and they are great machines that track properly,” Steve states. “Three are 2×72 belt grinders, two with controllers. They’re constructed of steel, making it very easy to make tooling and various fixtures for any project. The disc grinder runs perfectly true, making grinding precision angles a breeze.”
Steve Schwarzer’s Forges
Steve’s ribbon burner is one of several forges in his shop. He designed it and a close friend built it. It’s purpose-built for working very large canister damascus.
Steve brings the heat to his steel with a forge of his design.
“My forge is one of several I run in my shop. It’s a ribbon burner designed by me and constructed by a close friend. It’s purpose-built for working very large canister damascus. I have built dozens of forges over the last 40 years. This is the latest version. My previous forges were all versions of a Don Fogg design.”
If you’ve read past installments of “Shop Dump,” you know it’s not at all uncommon for equipment to be passed down from one maker to the next. Such is the case with Steve’s mill and surface grinder.
“My Kent USA knee mill is my go-to for all precision drilling and milling. It was rescued from a retired knifemaker who took excellent care of it,” Steve relates. “It’s variable speed, making it handy for all types of tooling.
“I also rescued my Kent USA precision surface grinder from the same knifemaker. It had a history when I went to retrieve it. I made a rookie mistake loading it. Long story short, I, for all practical purposes, destroyed it. I broke about everything on it. I had in mind to scrap it. I called a friend who owns one and asked if he wanted it for parts. He said, ‘Let me look at it.’ I took it to his shop. He is a true wizard. He totally restored the machine I thought was lost to better than new. He also taught me how to properly grind with it. I will always be grateful.”
If walls could talk there is no telling how many amusing tales Schwarzer’s shop could tell.
“I have a shop full of machines, all with some story attached,” the affable bladesmith said. “My tool rack has dozens of hammers and tongs collected over 40 years. This is my happy place. I love teaching and sharing the stories with students and friends.”
For more information contact Steve Schwarzer through his website at steveschwarzer.com.
A Switchblade Comb Is A Fun Take On The Knife Design. Unlike The Knife, The Switchblade Comb Can Be Taken On A Plane.
The switchblade looks cool. The blade firing out at speed and satisfyingly clicking into place is one of the great joys of the knife world. However, many legal codes of countries around the world don’t look fondly on the fast-moving blade. But that cool factor has endured and can be seen in switchblade combs. And they have the added benefit of being far, far cheaper than even the lowest-quality stiletto.
Switchblade combs?
Yes. It’s a comb that deploys like a switchblade. Maybe you’re looking for a comb with a burst of excitement, or a comb that isn’t made of cheap, flimsy plastic. Or maybe you’re a Jet or a Shark that needs to look good for their next rumble.
No matter what the reason, the switchblade comb is a fun little tool to have. This knife… I mean comb shows what the switchblade comb is all about.
Etrading Italian-Style Automatic Comb
This comb is a perfect example of what a switchblade comb can be. The handle is made from pearl-toned polymer, and the blade is made from 440 stainless steel that’s built to last. At nine inches in length, with a five-inch handle, the comb sits well in the hand and feels good to use.
The stainless bolsters help take the look to the next level, and it all comes together thanks to the push-button deployment that sends the comb out in a blink. Additionally, there is a trigger lock-out that prevents the comb from opening in your pocket or bag.
This is a fun piece that you can show off to friends and keep your hair well-coiffed too.
MSRP: $10.50
Tops Knives Tac-Rake
For something a bit more robust there is the Tac-Rake from TOPS Knives. This beard comb is of the fixed-blade variety (yes, not a switchblade but it’s so good) that’s made from black traction-coated steel meted to a tan canvas micarta handle.
It’s only 5.88 inches in total length so it’s probably not the best comb for a full head of hair, but it is specially made for a beard and will keep your facial hair looking clean and sharp. The fact that you’ll feel like a champ while using it is just an added bonus.
The included leather sheath makes traveling with the comb easy and stress-free.
MSRP: $105
Microtech UTX-85
This OTF comb is the Cadillac of combs. The blade is stainless, and the handle is anodized aluminum. It’s luxurious to use, and the dual-action mechanism deploys and retracts the knife in the blink of an eye.
The teeth are nice and fine so it’ll brush your hair and your beard with ease. Adding to the tactical nature of the comb, the glass breaker at the butt of the piece is a handy tool to have on your person. And, since this isn’t a proper sharpened knife, you can take this with you wherever you go from a baseball game to a restaurant and even on a plane.
MSRP: $340
BeardAir Tactical Beard Comb
For a tactical combing experience, there is this sleek comb from BeardAir. With a blade made from 17-4PH steel, and a handle made from aviation aluminum. It’s light and strong, and the automatic open/close function deploys the comb with speed and style.
Unlike the other combs on this list, the Tactical Beard Comb comes in all sorts of different colors so you can find the one that fits your aesthetic the best whether it’s a more traditional black knife with red accents or something more wild like the olive green and pink one above.
The Best Pocketknives For Women Are Knives That Are Easy To Maintain And Can Be Deployed In A Flash. These Pieces Stand Out From The Pack.
A pocketknife in and of itself isn’t gendered. It’s a piece of steel and aluminum, maybe Micarta®, that’s shaped to be a cutting tool.
However, certain knives are better for women due to the convenience, the fact that they are a bit smaller, or that they are excellent knives that are great at protection as well as standard EDC tasks. Below are a quartet that stand out from a crowded field of knives, any of which would be a great gift for your wife, sister, or yourself.
Kershaw Leek
Kershaw makes excellent knives at excellent prices, and the Leek is no exception. With a 3-inch blade and coming in at just three ounces, the Leek would be a perfect carry in a bag or a clutch as it doesn’t take up too much space.
The drop-point blade of 14C28N stainless steel is shaped to be a great EDC cutting tool as well as a puncturing implement if called upon. The bead-blasted blade and steel handle give the knife a clean, monochrome look. Made in the USA, the Leek opens easily with a flipper, and will serve you well for a very long time.
MSRP: $79.99
Benchmade Mini Griptilian
Benchmade makes high-quality knives with exceptional craftsmanship. The Mini Griptilian is small, nimble, and rugged knife that will be your loyal sidekick. It starts with the glass-filled nylon handle that provides a great grip and can take a beating.
The 2.91-inch plain-edge drop-point blade is CPM S30V stainless steel, opens with a thumb stud, and has a flat grind designed for slicing through pretty much anything within reason. The AXIS lock is fun to use and secures the blade safely and solidly in the open position. At just 2.81 ounces it’s incredibly light and perfect for life on the go.
MSRP: $150
Brighten Blades Green Day
Brighten Blades is a small, women-run factory knife outfit based in Utah. The Green Day knife is part of the company’s “Not So Heavy Metal Series.”
The knife is a small, minimalist blade with a 2.5-inch 8Cr13MoV stainless steel blade and an aluminum handle in a rich green. The blade also comes with a suede carrying case to store in a purse or pocket. This also keeps the knife in one secure place and doesn’t allow for accidental deployment.
The knives are fun to use and come in many different colors and designs.
MSRP: $29.99
Victorinox Swiss Army Knife
The unstoppable Alpine Swiss Army knife (SAK) from Victorinox is a great pocketknife for women. Even this small version features numerous tools that will help every day, from a spear-point blade to tweezers, scissors, nail file, and screwdriver.
All of the tools are made from stainless steel and are designed to last for life. The Swiss Army knife isn’t just for the intense outdoor enthusiast or craftsperson; the tool is excellent for busy parents looking to have a small toolbox at hand for whatever the kids can throw at them. The SAK is utilitarian and has endured for a reason.
You can also customize this version in 10 different colors, ranging from teal and pink to black and lime green.
The New Lucid From Kershaw Is An Exciting New Entry To The EDC Market That Can Also Be Your Companion On A Jobsite.
There are thousands of knives that are great EDC options but nowhere near as many that can also handle the abuse of being a workhorse on the jobsite. The new Kershaw Lucid is an exception.
The handle provides an excellent grip. One side is a glass-filled nylon scale in a rich shade of blue, and the other side is made from stainless steel with a nylon inlay. The 8Cr13MoV blade holds an edge well and is easy to resharpen. The knife looks great, feels great, and sits well in the hand. The assisted flipper is fun and easy to use, and the frame lock keeps everything tight and secure.
It’s a simple knife that is more than the sum of its parts. And there’s an elegance in that. Add in a price tag under $50, and you have a knife that’s a winner in multiple ways.
The New Kershaw Noventa Is A Fun Knife. The Art Deco-Inspired Handle And D2 Steel Blade Make For A Showpiece That Can Handle Being An EDC.
Kershaw’s last product drop of 2022 featured the Noventa. The stylish drop point is inspired by Art Deco architecture with a two-tone blade made from robust D2 high-carbon tool steel. The hidden flipper adds to the sleek look and feel of the knife.
The D2 blade is highly wear-resistant and retains an edge well. The two-tone black oxide and satin finish looks great and is a wonderful complement to the handle’s textured stonewashed steel. Aesthetically, this knife stands out from almost every other comparable knife on the market.
Kershaw’s dropped a beautiful knife at a great price. What more could you ask for?
CRKT’s Newest Knife Is Inspired By Dia De Los Muertos And Is A Sexy, Exciting Folder Designed By Michael Rodriguez.
In honor of Dia de Los Muertos, knife designer, and former Green Beret, Michael Rodriguez has created a knife to honor the holiday, his heritage, and his military service.
The new Xolotl Black from CRKT is named for the Aztec god of fire and lightning who ferries the deceased on their journey to the afterlife. It features all-black features from the coffin-shaped G10 handle to the liners and EDP-coated blade to give the blade a sleek, dark look.
The blade is made from 1.4116 steel and is 3.64 inches in length. Overall, the piece is 8.64 inches long.
The flipper not only deploys the blade quickly but also acts as a cross guard to help provide a secure grip on the knife. The coffin-shaped handle features 21 ribs, which symbolize Rodriguez’s 21 years of military service.
The knife is also a part of CRKT’s Forged By War program which donates of a portion of the money from every Xolotl Black sold and donates it to the Global War on Terrorism Memorial Foundation, of which Rodriguez is the president and CEO.
