Featured Knives

Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.

Click here to browse through our list of Featured Knifemakers.

Knifemaking – – Knife Collecting – – Tactical Knives – – Survival Knives

Warenski King Tut Dagger For Sale

Perhaps the most iconic handmade knife ever can be yours for the right price

It may be the most iconic custom knife ever and it was made by perhaps the best knifemaker ever. The King Tut Dagger reproduction by BLADE Magazine Cutlery Hall-Of-Fame® member Buster Warenski is available for sale through Exquisite Knives.

Buster Warenski’s reproduction of the King Tut Dagger took over five years to complete and, including the sheath, contains over 32 ounces of gold. (SharpByCoop image)
Buster Warenski’s reproduction of the King Tut Dagger took over five years to complete and, including the sheath, contains over 32 ounces of gold. (SharpByCoop image)

Commissioned by Cutlery Hall-Of-Famer Phil Lobred in 1982, the knife took Warenski over five years to complete. A pioneering collector of custom knives and 19th-century dress bowies and founder/creator/coordinator of the Art Knife Invitational, Phil had kept the dagger in a safe ever since, displaying it on rare occasions at select knife shows or for private viewings. He passed away in 2016. On Aug. 1, his widow, Judy, contacted Dave Ellis of Exquisite Knives and asked him to handle the sale of the famous piece.

Buster Warenski is widely recognized as one of the best knifemakers if not the best ever. He passed away in 2005.
Buster Warenski is widely recognized as one of the best knifemakers if not the best ever. He passed away in 2005.

Once valued at over $1 million, “the most famous contemporary handmade knife ever,” according to Ellis, has an asking price of $500,000.

LEGACY IN STEEL

The first of Warenski’s three “Legacy Knives”—the other two being the Gem of the Orient and Fire and Ice—the King Tut Dagger is a reproduction of the knife from the tomb of the Egyptian boy king, Tutankhamun, uncovered by archaeologist Howard Carter in 1922. It contains over 32 ounces of gold and took Warenski, widely recognized as one of the best knifemakers if not the best ever, over half a decade to build.

During that span he suffered through the trial and challenges of recreating the iconic dagger. Among them was the cold forging and fullering of the knife’s gold blade, learning such ancient techniques as cloisonné—a highly technical enameling process—and the granulation of the handle. The solid gold scabbard rivals the knife in terms of beauty and the many hours it took to make. A special handmade display stand comes with the dagger, both of which are in mint condition.

The King Tut Dagger repro was the cover for the February 1988 BLADE®.
The King Tut Dagger repro was the cover for the February 1988 BLADE®.

PRICED TO SELL

The current sale will be the second time Ellis has had a go at moving the Tut dagger repro.

“A few years before he passed, Phil Lobred asked if I would find a buyer for the Tut. His asking price at the time was $1 million. I had a number of interested parties but Phil was set on his price and I could not swing the sale,” Dave wrote. “Now, over six years since Phil passed, Judy contacted me about selling the King Tut Dagger. After deciding on a more realistic price—not that a million was unreasonable but few if any contemporary knives have attained that lofty status—I am marketing the piece on my Instagram and Facebook pages and on my website.”

An ABS master smith now retired from bladesmithing, Dave is a top collector and dealer of fine custom knives. He stated that to be able to offer his clientele such a special piece is indeed an honor.

Phil Lobred commissioned Buster Warenski to make the King Tut dagger repro in 1982 and Buster completed it in 1987. Phil, here on a dock in San Diego, created/founded the Art Knife Invitational in 1983. He passed away in 2016.
Phil Lobred commissioned Buster Warenski to make the King Tut dagger repro in 1982 and Buster completed it in 1987. Phil, here on a dock in San Diego, created/founded the Art Knife Invitational in 1983. He passed away in 2016.

Perhaps the only things better would be to a) sell it and b) own it.

For more information on the sale of the King Tut Dagger repro, visit exquisiteknives.com and click on ‘art knives’ on the home page.

Read More On Knife Collecting:

First Look: Buck 149 Hookset Breaker

Fishing Season Means Finding A High-Quality Fillet Knife You Can Trust, And The New 149 Hookset Breaker From Buck Can Handle The Abuse Of The High Seas With Ease.

Processing fish cleanly may be one of the hardest tasks you can do with a knife, and having the right equipment is so important to whether you slice off a clean filet or are left with chunks only good for a stew. The new 10-inch 149 Hookset Breaker is Buck’s newest fish fillet knife designed for use sailing the ocean or out on the lake. 

It all starts with the handle. It is glass-reinforced polypropylene with TPE rubber and provides a confident grip in all weather situations so you can slice with authority every time. The handle connects to a 5Cr15MoV blade coated in titanium for excellent corrosion resistance.

The blade is protected by an injection-molded sheath with an integrated belt loop for easy carry. The whole piece is 15.83 inches long from the tip of the blade to the butt of the handle.

MSRP: $44.99

Read More

Editor’s Note: This article was written by Mike Ableson.

First Look: CRKT Minimalist Spear Point

This New Fixed-Blade From CRKT Is Everything You Could Want In An EDC And More. Designed By Alan Folts, The Spear Point Is An Absolute Winner

The new CRKT Spear Point is an excellent fixed-blade knife. Designed by Florida-based maker Alan Folts, and part of the company’s Minimalist line, the Spear Point is compact, rugged, and can cut through almost anything.

The piece is just 5.2 inches long and weighs a light 2.1 ounces. An included thermoplastic sheath keeps the stonewashed 8Cr13MoV blade safe and secure in transit. The high-carbon stainless steel retains its edge well, making this a great knife to bring with you camping or keeping it in your shop. It can get into tight places that larger knives, both folders and fixed blades, simply won’t be able to.

And it looks great thanks to the resin-infused fiber handle that has a rich, dark green color. The handle also has three finger notches built into the handle for easy, secure grip.

The CRKT Spear Point continues a long line of successful knives from one of America’s top factory makers. At an excellent price point, the Spear Point is, without question, worth the investment.

MSRP: $36.

Editor’s Note: This article was written by Mike Ableson.

First Look: Spyderco Webfoot Sharpener

This New Sharpener From Spyderco May Revolutionize Portable Knife Sharpeners Thanks To A State-Of-The-Art Superabrasive.

Coming soon from Spyderco is the Webfoot Sharpener. Small and compact, the Webfoot may turn the knife sharpening world on its head thanks to its construction.

The sharpener is made from a single piece of carbon steel coated in Cubic Boron Nitride which is a state-of-the-art superabrasive second in hardness to only diamond. The CBN coating can sharpen without oil, water, electricity, or any clamps or stabilizing devices. And it can all easily fit in your pocket.

Place the Webfoot on a flat surface and rock it side-to-side to align the outer edges for a perfect 40-degree angle, ideal for utility knives. When it’s on its side, the sharpener gives a perfect 12.5-degree edge, perfect for shears and scissors of all types. 

Yes it’s small, but the Webfoot contains 15 square inches of surface coated in abrasive, giving you multiple angles to sharpen whatever blade needs a once over, including those with a serrated edge. The included suede pouch acts both as a handy carrying case and a non-slip work surface when needed.

MSRP: $85.

Editor’s Note: This article was written by Mike Ableson.

Read More

Trainer Butterfly Knife: Options To Hone Your Tricks

For Anyone Interested In Learning How To Use A Balisong, A Trainer Butterfly Knife Is Extremely Important.

Not all knives are built the same, and no knife embodies that more than the butterfly knife. Also known as a balisong, this blade opens with a flourish, and creating tricks and moves to open and close the knife has become a passion for many.

Take a look at this video below for just a small sample of some of the more basic balisong tricks. Even at this level, the smoothness needed to execute them is remarkable.

Why A Trainer Butterfly Knife

In order to perform tricks, and well, you need to put in hours of practice. Well, practicing slinging a butterfly knife has its pitfalls because you are rapidly moving a razor-sharp knife. 

That blade isn’t for show. If you hesitate, swing the knife the wrong way or simply shake your hand at the wrong time, that could mean the difference between successfully pulling off a new move or slicing your finger wide open. That’s why several states and countries have banned the knife in the name of public safety (at least by they’re telling).

That’s where the trainer butterfly knife comes in. It flows and moves like a traditional balisong, but it has no sharp edge. Some are metal, some are plastic, and all of them allow you to try out moves without the threat of a trip to the ER.

Instead of a traditional blade there is a steel or plastic rod in its place. This helps with the visuals of the knife as it moves and it keeps the user safe. The worst-case scenario with a trainer butterfly knife is that the blade replacement knocks into your knuckle. Sure, that might be sore for a minute, but it’s a lot better than a dozen stitches.

Best Trainer Butterfly Knives

Boker Plus Balisong Trainer

Boker Plus Balisong Trainer

Boker is a fine maker of knives, and also a fine maker of knife trainers. Their balisong trainer is well-balanced and robust thanks to a high-quality construction. The whole trainer, blade and handle, is made from stainless and the G-10 scale feels good in the hand. You can even choose between red and blue scales to customize the look of your trainer. Featuring the same mechanism as one of the company’s actual butterfly knives, this trainer may be as good as it gets when trying to learn the ways of the balisong.

MSRP: $85.95

Good Worker Butterfly Knife Trainer

Good Worker Butterfly Knife Trainer

If you’re the type of person who practices hard and gives their trainers a beating, this model from Good Worker may be your best bet. Made completely from 420 stainless, this tool can take a beating. One of the lowest-priced trainers on our list, you won’t have to feel guilty if it flies out of your hand performing tricks or takes its lumps over time. 

MSRP: $10.99

Squid Industries Squiddy

Squid Industries Squiddy

How about plastic? This trainer from Squid Industries provides everything you want from a butterfly knife trainer but is made from CPVC. In fact, it’s the first-ever CNC-machined plastic balisong trainer. Pretty cool.

Don’t worry, this isn’t a flimsy toy. The high-impact, heat-resistant CPVC (chlorinated PVC which makes it more durable) ensures a robust trainer. And it’s just as balanced as a traditional steel trainer. This would be great for a younger person interested in learning how to manipulate a butterfly knife. And it’s made and assembled in the USA.

MSRP: $44.99

Bear & Son Butterfly Trainer

Bear & Son Butterfly Trainer

This model from Bear & Son is the most knife-like of the trainers on our list. The dulled blade is in the shape of a clip point and is made from 440 stainless. At a glance, it looks like a real, working knife so this may not be the best trainer to buy depending on the laws where you live. However, it works like a charm.

The zinc handle opens easily and the weight of the steel gives it a good balance while it’s rotating. The handle comes in three different colors so there’s a level of customization with this balisong. 

MSRP: $65.99

Bbbarfly Pro V3

We wrap our list with something a bit out there. What if your butterfly trainer was also a bottle opener? That’s what you get with the Pro V3 from Bbbarfly. This model features a high-quality steel construction. The blade/opener is made from a polished 410 stainless steel and aluminum handles. The CNC-machined washers and hardware provide a smooth opening every time. Sure, this is a great tool for party tricks and start conversations, but it’s built to be a high-quality balisong trainer as well.

MSRP: $125

Read More

Shaving Sharp

Thanks To The Internet, Straight Razors Are Back In Style. These Trio Of Blades Can Keep You Looking Sharp And Feeling Smooth.

Mastering shaving with a sho-nuff handheld straight razor is a lost art that has recently become more popular thanks to social media shaving gurus and those who like a good challenge. 

Straight razors never went away, the internet just has a knack for making old things new and cool again. Let’s look at a trio of current offerings and shave them through their paces.

Boker King Cutter

Boker King Cutter

Boker has been producing straight razors since 1869 and the company offers many models today. The King Cutter, the company’s most popular razor, features a carbon steel blade with a deep hollow grind. The handle is a black polymer with a brass Boker Tree Brand logo escutcheon. The King Cutter was the lightest of the three review pieces, tipping the scales at a svelte 1.47 ounces. It features a monkey tail tang for quick blade access.

Being the most expensive of the test lot by a long shot and from a company that has been making straight razors for over 150 years, you’d expect the King Cutter to perform well. Simply put, it did. The blade was, ahem, razor-sharp right out of the box and glided through my two-day stubble clean as a whistle. I never had to back up and go over an area to get it smoother.

 The thinnest of the review blades, it got into tight spots a bit easier. However, a word of warning is in order. An extremely sharp blade like this will cut you faster, too, so take your time! The King Cutter’s high price tag may scare some away, though there are other straight razors out there that cost much more.

MSRP: $189.95

Rough Ryder Cinnamon Bone Stag Razor

Rough Ryder Cinnamon Bone Stag Razor

Rough Ryder’s Cinnamon Bone Stag Razor has all the trappings at a budget price, including the good looks of a traditional straight razor. The cinnamon bone stag handle, replete with an acorn escutcheon, is downright handsome—and Rough Ryder does bone stag well. 

The cutting portion of the blade has a light yet distinctive damascus pattern running across its face, and a barber’s notch at the point aids in safely opening and deploying the blade. A monkey tail tang completes the package.

Right out of the box, the Rough Ryder entry shaved the stubble straight from my face. The blade was plenty sharp and I was able to get into tight spots with good results. When you get down to the nitty-gritty, there are differences between this razor and an expensive one like the Boker.

There is a tad more drag on the blade and I had to back up a few times to get the area I was shaving totally smooth. To be honest, I expect this from a razor at this price point, and you should, too. That said, the Rough Ryder Cinnamon Bone got the job done and was no slouch. I recommend this razor to those who want to get their feet wet before taking the plunge on a high-dollar cutter. And, by golly, it was the most attractive of the bunch!

MSRP: $29.99

TOPS Knives Tac-Raze 2

TOPS Knives Tac-Raze 2

The TOPS Knives Tac-Raze 2 is designed as an EDC and not billed as a straight razor. Nonetheless, we threw it into the fray to see if we could shave with it, letting the chips fall where they may. 

A full 2.625 inches of the blunt-tipped blade has a slightly bowed edge. There’s a rat-tail tang reminiscent of the old friction folders, though not forged. The Tac-Raze 2 has a deep choil below the blade edge that splits time with the handle. TOPS includes a dark brown leather slip and a small bottle of protectant.

Would an EDC with a razor-style blade shave? Given how many YouTube videos there are of guys shaving with everything from bowies to kitchen fare, I figured why the heck not? A cursory check right out of the box with the blade warmed up and a light coat of shaving cream on a cheek gave me surprising results. Not only did the Tac-Raze 2 shave my stubbled skin with ease, it was darn smooth! Next, I cleaned the blade up and stropped it, and the shave was as smooth as I could get with a standard straight razor.

As I worked around my face I found some gremlins with the TOPS EDC. The handle is not nearly as nimble as a standard straight razor, which is to be expected since it’s not a standard straight razor. I found getting into tight areas like the crack between my upper lip and cheek particularly dicey. Bottom line? What you lose in dexterity with the Tac-Raze 2 you gain in versatility since, after all, this is an EDC knife with all the benefits—and it comes with a slick leather slip.

MSRP: $139

Scoring The Straight Razors

All three in our razor trio had their strengths and weaknesses, but all got the job done. The Boker King Cutter is the pro razor of the bunch. The Rough Ryder Cinnamon Bone is a nice entry-level shaver, and the TOPS Tac-Raze 2 is certainly the most versatile.

One final note: don’t be afraid to try a straight razor. As a knife enthusiast, chances are you’ve already developed a healthy respect for sharp blades. Wade in slowly and carefully—once you get a feel for the straight razor, it will feel right at home in your hand.  Happy shaving!

Read More

First Look: SOG Flash MT

The New Flash MT Is A Sleek, Contemporary Take On The Multi-Tool. With Seven Tools, The Flash MT Is Strong And Compact.

A good multi-tool is worth its weight in gold. The new Flash MT from SOG is a durable modern version of what a multi-tool can be. 

It all starts with the blade. The Cryo D2 steel blade is a 2.4-inch clip point with an assisted opening. No nail nick or slip joint for this knife. The compound leverage pliers are beefier than on many other multi-tools and are up to whatever challenge you throw its way.

The magnetic bit holder snugly holds the two-ended 4mm driver bits so you’ll have both a Phillips and a flathead at your disposal. A bottle opener and wire cutter round out the implements in the Flash MT.

When it folds away it looks like a thick EDC knife. It’s easy to use and not cumbersome to hold or deploy. SOG really hit it out of the part with this new piece.

MSRP: $69.95

Read More

Editor’s Note: This article was written by Mike Ableson.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement