Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.
Fixed-blade hunter finds its roots a knife gifted to CRKT’s founder.
CRKT is 30 years old this year, but who’s counting candles? Apparently, the company, because it’s commemorating the milestone with the release of a little something. And what better way for an outdoorsy brand from Oregan to mark an anniversary than with a hunting knife—a dang slick-looking one at that.
Shake hands with the Soldotna.
Designed by renowned craftsman, guide and all-around outdoorsman Russ Kommer the knife is a bit of a team effort. With the Soldotna, CRKT partnered with the master blacksmiths at Vegas Forge in Nevada to make the blade’s Damascus steel and worked with TOPS Knives in Idaho to manufacture the knife. It comes with a full-grain leather sheath with a belt loop and stud closer, which is hand-made in Idaho. Yet, the design itself is pure Kommer.
The Soldotna’s roots lie in a custom knife the maker and backwoodsman created for CRKT founder Rod Bremer. As the story goes, it was a gift for Bremer’s grandson who had a particularly special hunt planned. The name of the knife, interestingly, comes from an Alaskan town near the Kenai River where Kommer and Bremer would angle for king salmon together.
In addition to the limited edition, CRKT is offering a carbon steel version with a tan canvas Micarta handle.
As for the knife itself, it’s designed as a do-all hunting knife boasting a 3.5-inch drop-point blade, with a flat grind. It has enough belly for skinning detail but is svelte enough—particularly at the point—to handle more fine jobs in the field.
Ergonomics take the front seat in this extremely manageable knife, with a slight palm swell in the walnut handle to ensure it fills the hand. Furthermore, there’s a slight curvature near the finger guard, a safety feature that locks the knife in hand and prevents slipping. Well thought out, to say the least.
CRKT is only doing a limited run of the damascus Soldotna, with only 200 pieces up for sale. One of these beauties will set you back $500. However, if you don’t have that sort of change floating around your couch cushions, CRKT is offering a Cerakoted carbon steel Soldotna at a much more affordable $200. Note, the carbon steel model has the same specs as the Damascus, except in steel and handle material, which is tan canvas Micarta.
The SOG Recondo FX Is A Top-Tier Knife For The Hunter Or The Outdoorsman. A Nimble Fixed Blade, It Can Withstand The Wear Of Regular Use With Ease.
Sometimes you need a knife with a little more heft and a little more punch than a standard pocket knife. When you’re out on the hunt it’s imperative to have tools that can hold up to tasks big or small, easy or debilitating.
The new SOG Recondo FX is the knife you’re looking for. A full-tang, fixed blade made of 440C steel and cryogenically treated to a black nitride finish, the Recondo FX is the type of knife you’ll be able to trust in a pinch.
You can choose between a straight edge or a partially serrated blade when buying the knife. Both versions have a clip point and are 4.6 inches long. Additionally, you can choose between a black handle or a dark earth handle. Each is made with an overmolded grip and rubberized texture. This is designed so you can maintain a strong hold of the knife even if your hands get wet or slippery.Â
SOG Recondo FX in its sheath
Regardless of the style you choose, your knife will also come with a UMS-compatible sheath that won’t need any tools to set thanks to its adjustable tension system. The sheath is made of Kydex and can be mounted in a variety of positions.
This knife won’t be your normal EDC. What it will be is a tool worthy of being added to your set when you go hunting or into the outdoors. Strong, light, and easy to maneuver, SOG has, once again, made a top-quality knife.
MSRP: $129.95
Editor’s Note: This article was written by Mike Ableson.
This New Fixed-Blade From CRKT Is Everything You Could Want In An EDC And More. Designed By Alan Folts, The Spear Point Is An Absolute Winner
The new CRKT Spear Point is an excellent fixed-blade knife. Designed by Florida-based maker Alan Folts, and part of the company’s Minimalist line, the Spear Point is compact, rugged, and can cut through almost anything.
The piece is just 5.2 inches long and weighs a light 2.1 ounces. An included thermoplastic sheath keeps the stonewashed 8Cr13MoV blade safe and secure in transit. The high-carbon stainless steel retains its edge well, making this a great knife to bring with you camping or keeping it in your shop. It can get into tight places that larger knives, both folders and fixed blades, simply won’t be able to.
And it looks great thanks to the resin-infused fiber handle that has a rich, dark green color. The handle also has three finger notches built into the handle for easy, secure grip.
The CRKT Spear Point continues a long line of successful knives from one of America’s top factory makers. At an excellent price point, the Spear Point is, without question, worth the investment.
The Reverse Tanto Is One Of The Most Interesting Blade Designs. By Putting A Spin On A Classic Pattern, The Reverse Tanto Stands Out From The Pack.
In general terms, a knife profile isn’t something that seems like it should be reversed. The American tanto blade pattern, commonly seen on modern tactical and combat knives, is a modified version of the somewhat longer and more flowing traditional Japanese tanto. While there are variations, the American tanto blade features a hard angle in the belly curve up to the shallow, chisel-ground tip.
A reverse tanto profile keeps the hard angle of the tanto profile but moves it to the spine, thus “reversing” the conventional tanto style. This edge profile doesn’t usually have as harsh of an angle on the spine; on a tanto the tip usually curves up, akin to the larger katana profile. By flipping the edge over, the tip is brought into a straighter line with the hand and offers a good deal more stabbing ability.
An interesting point is that, at least in my direct experience, the reverse tanto is much better at cutting and stabbing tasks than the tanto. Profile matters a great deal in this case. The reverse tanto can be thought of as a very muted bowie in that it has a narrow tip and smooth edge, yet a good height to the spine; the tip can get into a medium easily and the rest follows with minimal effort.
An American tanto profile’s chisel-type tip has a more severe geometry that doesn’t easily lend itself to going through materials or fine cutting work. The area on an American tanto that usually takes the most damage is the tip angle itself. Not only that but, thanks to the severe angles, it is difficult to keep sharp.
The reverse tanto offers an easily maintainable edge and fine tip while having the strength of a larger blade. This allows the profile to be ground quite thin and remain very strong. The reverse tanto folders in this article are some of the lightest I’ve ever tested, and they cut far above their weight class.
Leatherman Skeletool KBX
Leatherman Skeletool KBX
The Leatherman Skeletool KBX is the smallest knife in the test—so small it could probably ride on a key ring. It is the only serrated knife of the test bunch. Despite being so small, the KBX offers a wide degree of general utility. It is not a heavy cutter like a few in this review. It is neither comfortable enough nor large enough to commit to hard use. It is instead something of a mini multi-tool suitable for the most basic use. It has an integrated bottle opener, which is a very nice touch—and it works!
The size of the piece is the best part and also the worst. As an EDC knife, it is somewhat small. However, for the right person wanting a low-profile knife, this one fits the bill. For basic work like opening boxes, cutting string, or just popping open a cold one, it’s great.
MSRP: $39.95
Benchmade Mini Osborne
Benchmade Mini Osborne
The Benchmade Mini Osborne is a perfect EDC folder. Not only is it extremely lightweight, it’s comfortable in the hand for medium tasks. The AXIS® lock is easy to operate. Closing the knife is not a challenge, though it is something of a two-hand operation in that you must pull back on the lock and then fold the blade down. Locked open it is very strong and has no flex or movement when working.
The Benchmade is probably the best balance of weight to cutting ability in the review. Consequently, it is also relatively costly. Benchmade has an understandable reputation as a top brand and this little folder demonstrates that a knife can be light, comfortable, and very sharp. It is great for domestic and simple chores and can be used to make kindling and spark. Like the Skeletool, it is really too small to be anything other than a light-duty blade.
MSRP: $210
Krudo Vice BA
Krudo Vice BA
The Vice BA (Bad Attitude) folder from Krudo is the largest knife in the test and the heaviest. There is a substantial difference between it and the other test models in terms of cutting ability and the size of materials it can digest. The Krudo has a large disc/thumb rest atop the spine, not only for ease of opening but also as a place to apply downward pressure for cutting. This alone puts the knife in a different category altogether in that it can break down medium sticks, and can even be used to hack off medium limbs. It excels at making tinder and has a thick blade and strong lock mechanism. It is easy to strike with as well.
The knife’s size is both a benefit and a downfall. It’s the toughest in the test but also meaty enough that you are aware of it in your pocket most of the time. If you’re in the woods or on the job site, the Vice BA would be a welcome friend and easy to use constantly.
MSRP: $244
Kershaw Lithium
Kershaw Lithium
The Kershaw Lithium is the only assisted opener in the bunch. It has a large amount of utility for the moderate cost and is a great EDC knife that offers a keen, clean edge and a very sharp point. The knife is heavy in the blade and comfortable in the grip.Â
It cuts quite well and can be worked with for extended periods of time comfortably, unlike the two smaller test knives. It has a matte finish, isn’t flashy, and offers nothing to immediately catch the prying eye of a passerby.
The tip can punch through most common materials and there’s enough mass to the blade that it can slash as well. As far as general utility, it can spark and is useful for making kindling and dealing with minor twigs and branches. It lacks true chopping power but like the others will work given the necessity.
MSRP: $51.99
Artisan Cygnus ATZ
Artisan Cygnus ATZ
The Artisan Cygnus ATZ arrived very, very sharp and with a most aggressive tip design. The blade is slender and light and lacks forward mass. As a result, it lends itself well for use in a stabbing motion, easily penetrating many materials. However, the grip is geometric and somewhat angular, thus making repeated stabs somewhat uncomfortable. It is a thin blade and shouldn’t be used to pry (a use most knives shouldn’t be put to in the first place).
While quite visually appealing, the ATZ takes up more space than all but the Krudo. The Artisan offers the best cutting ability of the bunch in general slicing. In the course of testing it maintained an edge very easily and the tip proved strong despite being thin.
While not designed as an outdoor knife or for preparing kindling, it sparks nicely. If you spend most of your time in town, this one is a bit flashier than the rest but still isn’t outside the realm of daily use, and likely won’t draw much attention from snooping eyes.
MSRP: $85.99
The reverse tanto excels at domestic cutting tasks. All the test folders would make fine EDCs, my preference being the Benchmade in terms of weight to size. You really can’t go wrong with any of the review knives as long as you keep the end use to a realistic setting. Don’t try to make any of these knives your primary outdoor tool. There are better knife styles for such use, though the reverse tanto works if it’s all you have.
Editor’s note: Bob Lum is credited by many with designing the original custom American tanto, while Cold Steel popularized the blade pattern in the factory knife industry.
The New Rescuehawk From White River Knife & Tool Is An Excellent Fixed-Blade Multi-Tool That Will Make Any Outdoorsman Happy.
Not every multi-tool folds up and fits in your pocket, and that’s a good thing. For someone looking for a more robust multi-tool, the new tactical Rescuehawk from White River Knife & Tool is exactly what you’re looking for.
Made from quarter-inch thick 80CRV2 steel, and designed by Kurt Delia, the Rescuehawk does a little of everything. The head features a 2.6-inch splitting edge with a strong piercing point horn on the opposite end.
The handle is incredibly versatile with a half-inch gas line channel wrench and split chisel pry point and textured G10 handle scales to provide excellent grip. The included bottom-eject Kydex sheath keeps the blade safe and secure in transit.
Overall, this tool is excellent for any outdoor lover and is great to have in case of an emergency or survival situation.
The BLADE Magazine 2021 American Made Knife Of The Year®, The Case Marilla More Than Pulls Its Weight.
The BLADE Magazine 2021 American Made Knife Of The Year®, the Marilla from W.R. Case & Sons is a drop-point-blade EDC folder made for slicing and fine work. Aluminum framelock construction and CPM S35VN stainless blade steel result in a lightweight folder that doesn’t weigh your pocket down.
The Marilla opens fluidly via a flipper and closes positively. I really like the fact that the knife does not interfere with your hand when you reach into your pocket. That said, the Marilla must slice and dice to be an effective EDC.
How Sharp Is The Case Marilla
First, I like to do a quick sharpness test with copy paper. In full blade-length slices, the Marilla zipped through the stationery smoothly and with nary a snag. I could have sliced faster if I could have moved my fingers faster. The edge cut in outstanding fashion!
Heavy Cutting With The Marilla
Next up: double-walled cardboard. I used a push cut for a full blade-length slice. The Marilla was very aggressive parting the medium. The handle shape was a plus in controlling cut widths. The minimum curl of the sliced pieces was great.
The Marilla bit very aggressively while skiving a scrap piece of 8-ounce leather. It was very controllable on the thinness of the slices.
The Marilla bit very aggressively while skiving a scrap piece of 8-ounce leather. I could hear the crunching sound as the blade cut away. It was very controllable on the thinness of the slices and experienced no issues at all.
From there it was on to whittling firesticks. The edge made smooth cuts in the pine with a tight curl in the curly-cue. Thin curly-cues or thick, the Marilla kept the curls clean. The handle was very comfortable while making the deeper cuts, exhibiting no sharp edges in the wrong places to hurt my hand.
Marilla Edge Retention
To test edge holding, I like to use sisal rope. The Marilla crunched to 189 cuts before I felt the edge sliding a bit. Performance: excellent! The thumb notches helped in controlling the cuts. Again, the Marilla handle was comfortable even when I applied hard pressure to it.
Batonning The Marilla
To check the lock, I locked the knife open and batonned the blade into a piece of half-inch pine to make kindling. I hit the blade spine opposite the tip and middle and directly on top of the lock multiple times. The wood split with no problem and the lock stayed tight very well, maintaining 100 percent lockup throughout. There were no blade wobbles or looseness during opening, lockup or closing.
The final hurdle was the antler whack—wrist snapping the blade into an old whitetail deer horn to see if the edge would chip or roll. Thirty whacks later and the edge survived with no damage, indicating excellent heat treatment of the S35VN blade steel.
The final hurdle was the antler whack—wrist snapping the blade into an old whitetail deer horn to see if the edge would chip or roll. Thirty whacks later and the edge survived with no damage, indicating excellent heat treatment of the S35VN blade steel.
Report On The Case Marilla
The Marilla is an excellent EDC knife. It’s comfortable in the hand as well as the pocket. The blade stays sharp longer than most. It is a great choice for EDC.
I WOULD …
… prefer a hollow blade grind for keener slicing, though such a grind might compromise the blade steel.
As long as its knives are not abused, Case warrants them against defects. For more information, contact Case, attn: F. Feightner, Dept. BL2, 50 Owens Way, Bradford, PA 16701 800-523-6350 or 888-442-1932 [email protected], www.wrcase.com.
SOG marks four decades with a limited, 500-piece run honoring its original MACV-SOG combat bowie root.
To mark four decades in business, SOG Knives has released a limited-edition homage to the blade that started it all: the 40th Anniversary Fat Guard Bowie. Drawing direct design cues from the original S1 Bowie introduced in 1986, the new release pays tribute to the covert fighting knives carried by MACV-SOG personnel during the Vietnam War.
Historical Roots, Modern Production
The 40th Anniversary model centers around a 6.1-inch clip-point blade forged from AUS-8 stainless steel. SOG finished the steel with a black PVD coating for added corrosion resistance and reduced reflection.
True to the traditional combat bowie silhouette, the handle is built from stacked leather, offering a classic aesthetic alongside a contoured grip. A substantial brass guard and matching butt cap frame the handle assembly. Production is strictly capped at 500 individually serialized units, with each knife’s specific number etched directly into the pommel.
Commemorative Display Package
Rather than shipping as a standalone tool, SOG packaged the anniversary Bowie as a complete collector’s set. The knife sits inside a handcrafted pine display case outfitted with a clear glass viewing lid and an engraved anniversary plaque.
Accompanying the fixed blade inside the presentation box is a custom SOG 40th anniversary Zippo lighter and a signed certificate of authenticity. For field carry or storage, the set includes a heavy-duty black leather belt sheath, complete with a front-mounted snap pocket containing a touch-up sharpening stone.
The 40th Anniversary Fat Guard Bowie package is available directly through SOG’s website while supplies last.
