Featured Knives

Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.

Click here to browse through our list of Featured Knifemakers.

Knifemaking – – Knife Collecting – – Tactical Knives – – Survival Knives

Featured Knife: Skinner from Ridgeline Knife Works

0
Best Skinning Knives
This skinning knife is ready for hard work. It’s made in the USA with USA materials. (Ridgeline photo)

The Skinner from Ridgeline Knife Works was designed with a big skinning belly in the 3-inch blade (think back to the old Dexter skinners), without sacrificing the ability to cut tendons and gut.

The G10 handle provides comfort regardless of the way the knife is held, and jimping adds additional finger grip. With a skeletonized full tang and no heavy bolsters or pommel, the weight is about 5 ounces — just enough to feel good in your hand.

Whether you choose the traditional route with D2 or opt for the advanced S35-VN stainless steel, you can count on a knife that will keep its edge through the job, and the next.

Even better, the knife is made in the USA from USA materials.

“I started this company because I saw a distinct lack of knives that were actually designed for what we do as hunters,” said Zack Waddle, Ridgeline owner. “As an engineer I believe that there should be a knife available to outdoors enthusiasts that has every detail engineered to make tasks faster, more comfortable, and well, more fun.”

Here’s where to get this and other Ridgeline knives.

Best Knives for Hunting: Deer & Deer Hunting Clip Point Knife

1

Note: Click this link to purchase the knife, available only at ShopBlade.com. The knife is no longer available at ShopDeerHunting.com.

Best knives for deer hunting
Deer & Deer Hunting knows what makes the best deer hunting knives. When it found one that met the criteria, it put its name on it. Then it made three versions of it.

BLADE‘s media sister over on the deer hunting side is Deer & Deer Hunting, and you can imagine that it knows a thing or two about knives. Deer & Deer Hunting editors recognize how a dependable blade makes all the difference. When you need a knife, you need a knife.

That’s why BLADE was thrilled to hear that Deer & Deer Hunting partnered with the American Knife Company to produce an exclusive line of hunting knives. Here are the must-know details straight from the editors themselves:

Emblazoned with the DDH logo right on the blade, this classic design puts a modern twist on an old favorite of deer camps across North America.

Micarta handles offer a firm grip in slippery conditions common to bad weather, field dressing, butchering and the rugged demands of the hunt. A healthy dose of chromium in the A2 steel blade means it’ll stand up to the worst you can throw at it. The clip point blade design is as versatile as it comes, ready to make any task at deer camp a treat.

That sounds like the makings of the best deer hunting knives around. Whether you’re a collector or a hunter, click here to get the best knife for deer hunting you can shake an antler at.

Featured Knife: Mako Folder by MacGray & Co.

Best folding knives featured BLADE magazine
In addition to being a fine example of a modern folder, the Mako Folder from MacGray & Co. is made in the U.S. from domestic materials.

Specs

  • Company: MacGray & Co.
  • Knife: Mako Folder
  • Designer: MacGray & Co.
  • Length: 8 1/2 inches
  • Blade: CPM 154, saber grind, modified drop point design
  • Lock: Titanium Liner Lock
  • Handle: Black Micarta Handle
  • Ambidextrous thumbscrew
  • Stainless steel variable clip

An All-American Knife

The MacGray & Co. Mako Folder knife is made in San Marcos, California, with quality materials from small American suppliers. The frame is milled from Grade 5 titanium for an excellent combination of strength, weight reduction and corrosion resistance.

The Mako sports a tried and true locking liner, which is self-adjusting to wear and prevents the blade from closing on the user’s hand as it grasps durable Micarta or G-10 handles.

The Steel: Two Great Choices

The blade is ground from your choice of two steels.

D2 is a high carbon, high chromium steel that offers excellent resistance to wear and abrasion, holding an edge very well. It is often referred to as “semi-stainless” due to its high resistance to corrosion.

The other option, CPM-154 stainless steel, is created in a process that produces a uniform distribution of the carbides. This provides material consistency, greater resistance to breakage and toughness. It’s an excellent stainless steel with high wear resistance.

The Blade: Strong and Sturdy

The satin-finished blade has a sabre grind for additional strength and sturdiness. MacGray & Co. harden, cryo-quench and temper blades in house.

No Detail Left Untouched

The Mako sports a stainless steel, .25-inch pivot with a bronze pivot bushing. It features a stainless steel pocket clip, hardware and ambidextrous thumb screw.

A Lifetime Guarantee

Each MacGray & Co. knife is made by three guys who love what they do. It’s no surprise that they stand behind their work with a lifetime guarantee and are committed to giving the highest level of service to knife enthusiasts.

Where to Get This Knife

The Mako Folder from MacGray and Co. is available here and ready to be added to your knife collection. Don’t miss it!

Featured Knives: Oz Knives

Oz Knives 1

Image 1 of 13

125+ layers of 1095 carbon steel and 15N20 Nickel steel
Fold: TWIST
Handle Material: STAG / BROWN MICARTA
Guard/Butt Cap: NICKEL SILVER
Style: DROP POINT

As the creative force behind Oz Custom Knives, Jim Ort made a name for himself with his signature 1095 carbon and 15N20 nickel damascus blades. From tip to pommel, his fixed blade knives offer a classic look that recalls a time when no one left home without a knife. Ort puts his own twist on these timeless favorites by working in modern materials to offer the performance and curb appeal 21st century collectors crave.

Originally hailing from northern Wisconsin, Ort moved into full-time knifemaking in 1996 after retiring to Arizona. In addition to knives, Ort is also an accomplished sheathmaker.

Find more of Ort’s creations at Oz Custom Knives, visit Copper State Cutlery. For direct inquiries, e-mail Ort at ort [at] cox [dot] net.

Featured Knife: CRKT Homefront – 2016 Most Innovative Imported Design Award Winner

The CRKT Homefront: A Hit Before It’s Even Out the Door

What I enjoy the most about knife shows is the hidden gems I’ll find among the blades. Whether it’s a unique spin on a classic design, a different type of steel or handle material, a peanut-butter-meets-chocolate pairing of knifemaking pros or a radical new approach, nothing beats finding that diamond in the rough. The 2016 BLADE Show was no exception, and that’s where I first encountered this:

This, ladies and gentlemen, is the new Homefront from Columbia River Knife & Tool (CRKT), and it went down as one of my top finds at the world’s foremost knife event. Straight from the brain of Ken Onion and sporting patent pending features, I could tell this was a game changer right from the beginning. The awards ceremony at the BLADE Show proved me right. The Homefront took home the award for 2016’s Most Innovative Imported Design, and it’s not even on shelves yet.

What Makes the CRKT Homefront Special? Field Strip Technology

CRKT Ken Onion Homefront Best Knife Award Winning
“The new Field Strip Technology is great and all, but have you tried NOT burying your knife in mud?” (CRKT photo)

The Homefront is to knives what takedown rifles are to firearms. The Homefront’s wickedly simple Field Strip Technology allows the user to disassemble and reassemble the knife in mere seconds. Just flip a switch and turn a screw as shown in the video above. It’s as simple as that.

That same video shows the knife being cleared of dirt and debris in a stream after use outdoors, which is a great application of the Field Strip Technology. But you know what I’m most excited about? Pocket lint.

“The Easier a Knife is to Clean, the More Likely it is to be Cleaned”

Pocket lint is the bane of my everyday carry folders. The sorcery of fuzz, residual heat and repetitive motion that comes with slipping an EDC into the pocket can form a gooey mess we knife scientists like to call, “gunk.” (I’m sure there’s a Greek root word in there somewhere.) This gunk builds up in hard-to-reach places and eventually requires disassembly, because there’s a limit to what all those gallons of knife oil can do.

With Field Strip Technology, cleaning up no longer requires a set of tools and a magnet to find those tiny screws when they inevitably roll onto the floor. The Homefront comes apart in seconds, then reassembles just as quickly. The result is an simple-to-maintain folding knife that will last. The easier a knife is to clean, the more likely it is to be cleaned.

I fully expect CRKT to use Field Strip Technology on other models in the future. I wouldn’t put it past CRKT to come out with add-ons to the Homefront to take full advantage of this tech, such as alternative blade and handle designs. To that end, the Homefront would be more like the AR-15 of knives, where the appeal is in a platform that allows customization specific to the end user. That level of personalization is obvious in trends outside of knives, too, and the Homefront could mark the beginning of a wider evolution of the consumer knife market. If this is the bandwagon, I’m hopping on.

Where to Get the CRKT Homefront: ShopBlade.com

Ken Onion award winning knife 2016 blade show
The CRKT Homefront before and after, and before and after again, and again, and again and again. Click to order yours today from ShopBlade.com.

ShopBlade.com is one of the first outlets anywhere to carry the CRKT Homefront, and it does so with pride. Here are the specs:

  • Overall Length: 8.313 inches
  • Closed Length: 4.728 inches
  • Weight: 4.8 ounces
  • Blade Length: 3.502 inches
  • Blade Thickness: 0.133 inches
  • Blade Steel: AUS 8
  • Blade HRC: 57-58
  • Blade Finish: Brushed Steel
  • Edge: Plain
  • Handle Material: 6061 Aluminum
  • Lock: Locking Liner

Click here to order your CRKT Homefront today!

A Look at the Official BLADE Show 2016 Knives

It’s a sad fact: the BLADE Show comes but once a year. There is, however, a way to enjoy this incredible event long after all the knife makers and collectors have broken camp.

Official BLADE Show knives are your opportunity to own and enjoy a piece of the “World’s Foremost Knife Show,” for years to come. Of course, if you can resist making these gems your everyday carry choice.

That is a conundrum, because the BLADE Show seeks out not only eye-catching designs from some of top makers around. But it also hunts out practical knives that can handle nearly anything its owner can dish out. These knives are the marriage of form and function.

And each one has a unique aspect to them. Not only is the show’s insignia roll marked across the blades or handle, but each is a special edition with limited runs and individually numbered. This makes each one exclusive to its owner, not to mention gives the knife the potential to accrue value as the years pass by.

Here’s a look at this year’s Official BLADE Show knives.

outrageCRKT Outrage (Run of 300 for the BLADE SHOW)

Ken Onion perhaps summed up his latest creation for CRKT the best, defining it as “Somewhere between gentlemanly and tactical.” In short, the knife is a looker and a doer.

On the aesthetic end of the Outrage is its finely textured handle, which includes lateral cuts in the aluminum that mimics corduroy. The handle of the limited run of 300 knives also features ergonomic finger cuts, to give the user a better purchase on the Outrage, thus making it more responsive.

The blade is a modified drop point — Onion describes it as a semi skinner — with a big belly and a fine point for detail work. The 3.19-inch blade is made from 8C12MoV stainless steel, which hardness helps it take a precision edge. The Outrage features a deep-pocket clip and a locking liner. And the flipper has a smooth-as-silk action, facilitated by its IKBS ball bearing pivot system.

 

Chris Reeve Knives Inkosi (Run of 25 for the BLADE SHOW)

Inkosi The Inkosi can be summed up in one word — overbuilt. Chris Reeve Knives has outdone themselves with this petite folder, outfitting it with a number of features not often found on a knife its size.

To start off, the Inkosi has a large pivot — a first for the company on one of its small knives — which makes the knife as solid as a rock when open. It also features oversized washers, which eliminates nearly all the play in the blade and increases its lateral strength. And finally, the knife has a ceramic ball end lock that virtually ensures the Inkosi stays open once the blade is deployed. The 2.8-inch blade has a hollow grind, a design choice that helps add life to the knife, given it more readily maintains its edge after repeated sharpenings.

Chris Reeve has taken the Inkosi’s resiliency to the next level with the handle and clip material, opting for lightweight and robust titanium. Uniquely, the BLADE Show logo and run number appear on the handle. And Chris Reeve has made the knife easy to manipulate, giving it a pronounced thumb stud. The Inkosi not only has the makings of a fine and functional knife, but it has looks to boot. Truly, this limited run of 25 knives for the BLADE Show is attractively Spartan.

 

Phrike Spartan Blades Phrike (Made upon order)

Named for the Greek goddess of horror, the Phrike has everything to send chills down a knife aficionado’s spine — in a good way. It is tactical, yet attractive and as an Official BLADE Show knife, exclusive.

Only available at ShopBlade.com, each one is made upon order at Spartan Blade’s North Carolina manufacturing facility. But there are some special features that come from buying the BLADE Show Phrike. It comes outfitted with a carbon-fiber handle only found on this special edition.

And, of course, it comes with the BLADE Show logo and serial number roll marked on the blade. The 4.25-inch blade itself is a swedged drop point, giving it a robust aft for heavy-duty jobs that winnows down to a fine tip for precision work. The Phrike comes with a nylon sheath and is completely made in America. And while it has the ability to tackle any job put under its edge, it is truly made to be a collector’s knife.

WE Knife Marries Top-Notch Design with Superior Materials

In creating a superior knife two factors must mesh seamlessly — design and material. WE Knife has covered both bases again and again in nearly two decades of manufacturing.

The knife maker has whipped up some pretty striking blades over the years, turning an eye to both function and ergonomics. And it has executed them with some of the most resilient and desirable material available today.

Durable Titanium, rugged CPM-S35VN steel, modern ceramics — the company’s knives are built to go the distance — then some. The gallery below showcases two examples of WE’s precision knife making. And it doesn’t take much study of the Model 601 and 604 to see that the manufacturer strives to live up to its goal to “create the world’s strongest, enduring quality, sharpest knives.”

Model 601

Image 1 of 2

The 601 has been one of WE’s cornerstone knives, for good reasons. Not only is the folder outfitted with a rugged titanium handle and a CPM-S35VN steel blade (renowned for its strength), it also features a top-notch design. The handle is ergonomically shaped to better fit in the palm and gives the user more control over the knife. The blade is easily accessible with the knife’s ceramic ball bearing enabling a smooth and fast action. And the titanium handle features a titanium clip, to always keep the knife at the ready.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement