Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

Hunter’s Edge: 3 EZ-Carry Field Hones

    Keeping your hunting knife sharp at all times is a must in the field. One of the best ways to do it is to touch the edge up after each time you use it—and the easiest way to do that is with a portable field sharpener.

The Spyderco ProFile Fine/Medium Sharpener (pictured at top) offers a medium-grit stone for very dull edges and a fine-grit stone for edge finishing and/or touch-ups. A convenient pocket carry leather case is included. For more, click on www.shopblade.com/profile-finemedium-w8595?lid=SSfbbl101112

The GATCO Diamond Stix Sharpener (second from top) features a solid brass knurled handle for easy gripping and which contains a monochrystalline diamond rod that sharpens serrated blades as well as hunting knives, shears and more. For more, click on www.shopblade.com/gatco-diamond-stix-sharpener-50ds1?lid=SSfbbl101112

The GATCO Edgemate Carbide Pocket Sharpener (bottom) is designed to sharpen your hunting knife in four to five gentle strokes via its long-lasting tungsten-carbide replaceable blades. For more, click on www.shopblade.com/gatco-edgemate-carbide-pocket-sharpener-40001?lid=SSfbbl101112

 

How to Use a Knife Sharpening Rod

0

No matter the brand or model, sharpening steels are used the same way. Most manufacturers recommend using one while standing at the kitchen counter or seated at a table.

The Set Up

Take the sharpening steel and place the tip on the table, held upright with the handle at the top.

With one hand, grasp the handle firmly, keeping it perpendicular with the flat surface at all times.

With the other hand, grasp the knife handle and place the blade at a 20-to-30 degree angle in relation to the sharpening steel. Place the blade as close to the guard as possible, set to start at the part of the blade closest to the tang.

Move the Blade

In one motion, move the blade down the length of the rod while at the same time draw the blade fully across the steel. When you near the flat surface you are working from, though without touching the surface, you should be at the blade tip.

Repeat

Raise the blade to where you started from, switching the blade to the opposite side, then repeat the same stroke. Then, return to the side you started from, and repeat once again. Do an equal amount of strokes for both sides of the blade.

Getting Better

As you become more comfortable using the sharpening steel, you can forego the flat surface and hold the steel with one hand similar to how you would a large kitchen knife. With the other hand, place the blade on the rod at the recommended 20-to-30 degree angle and lightly push the blade across the rod, ending at the blade tip.

I highly recommend you not proceed to this step until you are confident enough, because with this alternate method chances for not holding the angle correctly is greater.

Let the Rod Do the Work

Whatever method you use, remember to always use light strokes. There is no need to bear down on the blade with pressure. Let the rod do the work.

Chesapeake Knife Show

This is the first year we will be attending this show.

33rd Annual New York Custom Knife Show

0

November 19, 20, 21, 2010

Crowne Plaza Hotel – Secaucus, New Jersey
2 Harmon Plaza
Secaucus, New Jersey 07094

Friday 1 pm – 7 pm

Saturday 10 am – 6 pm

Sunday 9 am – 3 pm

Day Pass – $15 (admission for day of purchase)

Collector Pass – $20 (3 day admission)

VIP Pass – $30 (early admission on the 19th as well as 3 day admission)

~ All Passes are Eligible for Daily Prize Drawings ~
~ Collector and VIP Passes are Eligible for Grand Prize Drawings ~

The 31st Annual American Edge Collectors Association Show

The 31st Annual American Edge Collectors Association Show

Cool Custom: Jesse Hu’s Thorfinn Daggers

Hu takes the Vinland Saga’s famous daggers from screen to steel.

Anime and knifemaking are seldom mentioned in the same sentence. However, with a pair of striking daggers, an online knifemaking sensation has skillfully forged together that creative gap in cold, hard steel.

Jesse Hu is a multiple Forged in Fire champion and a prolific YouTube creator. When his online fans demanded a rendition of Thorfinn’s daggers from the popular animated Vinland Saga series, the adventuresome smith didn’t back down from the challenge. However, he set stringent goals for how he wanted the fictional blades to materialize.

“I have seen a lot of people make their own versions, but I haven’t seen any that truly captured their energy from the anime,” Hu said. “I felt it was possible for me to make a pair of daggers that fans would feel I directly pulled from the screen.”

The results are a spot-on set of daggers boasting 81/2-inch blades of 80CrV2 steel with carved Ringed Gidgee handles and one with a 1/2-inch-thick brass guard. Hu’s carving emulates the animation’s leather-wrapped look. While there is little actual Viking in the daggers’ overall design, the maker’s choice of wood for the handles did inadvertently bring a touch of the historic accuracy to the fantasy knives.

“One thing I discovered from a friend was that there were a bunch of carved wooden handles on Viking-era blades,” Hu related. “But I only heard about this after I had finished the daggers.”

Hu estimates he put two weeks of work into his rendition of Thorfinn’s daggers. In the end, the project was a labor of love, with Hu compensating himself by keeping the daggers. (Jesse Hu image)
Hu estimates he put two weeks of work into his rendition of Thorfinn’s daggers. In the end, the project was a labor of love, with Hu compensating himself by keeping the daggers. (Jesse Hu image)

The greatest challenge in bringing the two-dimensional blades into the physical world came from the inconsistency of the source material. In the anime series, Thorfinn’s daggers can change from scene to scene, forcing Hu to hit a moving target.

“Some pictures made the handle look rectangular in cross section as opposed to ovular; some made the central fuller look really thin and others quite thick,” he said. “I had to pick and choose from all these images to create something that felt accurate to all of them.”

Studying frames from the series and interpreting how the ink daggers’ ratios translate to steel was a painstaking process. Hu estimates he invested two weeks bringing the anime knives to life. Given the dedicated following of Vinland Saga, he figured the time invested would have paid off—had he not decided to keep them for himself.

“A cool piece doesn’t always mean a smart business decision,” he quipped.

Check Out More Cool Customs:

How Knives Can Save Babies

     The recent tragic death of the 11-month-old infant who onlookers were unable to free from a burning car because no one had a knife to cut the baby free from a jammed seat belt is heartbreaking. First and foremost, a young life was snuffed out in a most painful, terrifying way. My thoughts and prayers go out to the child’s parents and family, as well as those on the scene who were unable to save the infant. The incident will continue to haunt all concerned for many lifetimes.

     The lack of a knife carried by any of the bystanders to cut the seat belt and free the baby was a contributing factor in the infant’s death. The fact it happened in Los Angeles with its strict anti-knife ordinances is even more detestable, where anti-knifers continue to succeed in their crusade against knives. Anti-knife laws indirectly—some might say directly—kept the child from being rescued, and no doubt will prevent others from being saved in future catastrophes as well. (For more, see “For the Want of a Knife” in the “Forum” at http://knifeshowcase.blademag.com.)

     Ordinances designed to keep people from carrying knives and, as a result, from saving the lives of others in emergency situations must be repealed. Of course, organizations like the American Knife & Tool Institute and Knife Rights and elected officials such as New Hampshire Rep. Jenn Coffey are the standard bearers in focusing on the repeal of anti-knife legislation. By joining and supporting them and speaking out on your own, writing your legislators and local newspapers, voicing your concerns on social media like Facebook, Twitter, etc., you can do your part, too. And be sure to voice your concerns in non-knife venues. You are “preaching to the choir” if you do it in pro-knife venues. It is the non-knife ones that need to hear the message.

     In a heartrending way, the infant’s horrific death in a burning automobile magnifies the folly of anti-knife laws. In fact, thousands upon thousands more fatalities occur in car accidents than because of knives.

     In place of anti-knife ordinances that exaggerate the problem, why not institute pro-knife ordinances that not only protect your right to carry knives, but also address the slaughter that occurs on our nation’s highways by enabling you to respond to emergencies such as the one in L.A.? Moreover, why not require the manufacturers of automobile baby seats to equip each of the seats with a seat-belt cutter conveniently placed for a parent or onlooker to use to cut the baby’s seat belt in an emergency? And while we are at it, why not require automobile and truck manufacturers to stock each and every vehicle with a seat-belt cutter?

     Ideally, said manufacturers would take the lead and include seat-belt cutters with their products. Not only would it be a public service, the manufacturers would add value to their baby seats and vehicles. However, in today’s cost-cutting atmosphere, most manufacturers probably will not act without some kind of legislative push.

     A number of knife companies have seat-belt cutters with the edges recessed for safety. Columbia River Knife & Tool offers one—the model also has a window breaker and flashlight—that attaches to a seat belt and is thus immediately accessible in an emergency situation. Seat-belt cutters can be the next best thing to carrying a knife, and are probably better and definitely safer when it comes to cutting a person from a jammed seat belt.

     Repealing anti-knife legislation and promoting a seat-belt-cutter law would save the lives of innocents like the baby in L.A.—and, ironically, given the proper circumstances, maybe even the politically correct idiots who refuse to carry knives themselves.

 

To read similar stories and all about the latest knives, knife news, knife shows, knifemakers, knife manufacturers and much more, subscribe to BLADE® by clicking on http://www.shopblade.com/product/blade-magazine-one-year-subscription-us/?r+ssfb91211#BL1SU

 

CAPTION

Columbia River Knife & Tool’s Exitool is a seat-belt cutter, flashlight and window breaker that attaches to a seat belt—where you need it, when you need it. (CRKT photo)

 

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement