Home Blog Page 239

New Measure Will Revamp Alaska Knife Law

With the stroke of a pen, Alaska Gov. Sean Parnell has signed a new measure known as HB33 that will result in sweeping reform of Alaskan knife law.

Northern Knives retail knife store in ??????, Alaska, will be among the many who benefit from Alaska's sweeping new knife reform law. (Northern Knives photo)
Ray Thibault, owner of Northern Knives in Anchorage, Alaska, was among those who witnessed the signing of Alaska’s sweeping new knife law. (Northern Knives photo)

The new law will go into effect Sept. 18. Until then, however, existing Alaska knife laws remain in place.

According to Knife Rights, HB33 will legalize the possession, transfer and carry of automatic knives, aka switchblades, and also enact knife law pre-emption, which repeals all local knife laws and prevents new ones from being enacted—in this case, in Alaska.

Alaska will become the 7th state to enact knife law pre-emption, Knife Rights reported.

The new law will be particularly beneficial to the state’s outdoor and hunting industries, both of which rely heavily on hunters and outdoors people—and most hunters and many who spend time outdoors use and carry knives.

Knife law pre-emption, meanwhile, prevents the oppressive practice used by many towns, cities and counties within states whereby the knife laws are contradictory and you may literally be legal, illegal and then legal again when you carry a knife and pass from town to city to county.

Gov. Parnell invited Todd Rathner, Knife Rights director of legislative affairs, to the signing ceremony in Palmer, Alaska. Also in attendance were Ray Thibault of Northern Knives retail knife store, Sen. Charlie Huggins, HB33 Sponsor Rep. Mark Neuman, House Speaker Rep. Mike Chenault, Rep. Wes Keller and Rep. Bill Stoltze.

For more information on the new law and pro-knife laws in general, contact Knife Rights and/or stay tuned to www.blademag.com.

Featured Knife: Tom Kreger Carolina Field Knife

SK-934

New from Sarge Knives is the SK-934, also known as the Tom Kreger Carolina Field Knife. Among the crowded field of fixed blade knives for outdoor duty, this one stands out for the little extras that come with it, along with an outstanding price point. That’s why it’s a BLADE featured knife.

That’s a bone handle for starters, polished off with red liner and brass fasteners. It adds up to a handsome look and feel.

The steel on the 3.5-inch, mirror polish blade is 440C stainless. The drop point offers plenty of room for the thumb along the spine. This increased control is important when the job gets demanding.

When paired with the handle, the overall length of the Tom Kreger Carolina Field Knife is 7.5 inches.

As a finishing touch, Sarge Knives is offering a black leather sheath with each Tom Kreger Carolina Field Knife. That’s real leather, not the plastic stuff that sometimes gets passed off as such.

Here’s the best part. The price point clocks in at only $59.95. That’s one heck of a deal.

To recap, here are the specs again:

  • SK-934, Tom Kreger Carolina Field Knife
  • Handle: White Bone with Red Liner and Brass Fasteners
  • Blade: 3 ½”
  • Overall: 7 ½”
  • Finish: Mirror Polish
  • Steel: 440C Stainless
  • Includes: Black Leather Sheath

You’ll have to go right to Sarge Knives to get this super deal. Click here to get a Tom Kreger Carolina Field Knife for just $59.95 from Sarge Knives.

Video: Jenn Coffey Keynote Address

0

Best knife book
Knives 2014 is available for pre-order now. Click the cover to order.

The Hon. Jenn Coffey offered this keynote address at the 2013 BLADE Show. Although a good deal of her speech talked about knife rights, she also mentioned counterfeiting.

“We have all seen the hard work, dedication and imagination of our friends and family stolen, and knock-offs made and sold as if they were the real thing,” Coffey said.

Another idea she addressed was pairing knife manufacturers with car dealers. Seat belt cutters are an important tool. Could it be time for the two sides to meet and offer seat belt cutters in new vehicles?

What are your thoughts on these important issues? Leave a comment below.

 

ABS Announces 1st School Outside USA

An example of knives made in Belgium is the Hurak Fighter by new ABS journeyman smith Samuel Lurquin. (SharpByCoop.com photo)
The ABS will open a new bladesmithing school in Belgium in October. The Hurak is by Belgium’s Samuel Lurquin, who earned his ABS journeyman smith stamp at the 2013 BLADE Show. (SharpByCoop.com photo)

The American Bladesmith Society (ABS) will offer its first-ever bladesmithing school outside the USA beginning in October.

Operated in partnership with The Forge at Ostiches, Belgium, the school’s first class will be “Introduction to Bladesmithing.” Limited to seven students, the class will have as its primary instructor ABS master smith Jean-Paul Thevenot of Dijon, France. Belgium’s Dirk Bourguignon and Frederic Taquet, both ABS bladesmiths, will assist.

The school site is in a beautiful village south of Brussels. Accommodations are nearby within two to three miles. English will be spoken.

The first ABS school of bladesmithing outside the USA was approved in a vote of the ABS Board of Directors during the ABS annual meeting at the 2013 BLADE Show & Living Ready Expo (www.bladeshow.com) May 31-June 2.

The Belgian facility is the fourth ABS school of bladesmithing. The others are the original—the Bill Moran School of Bladesmithing in Old Washington, Arkansas—and the Haywood Community College  in Clyde, North Carolina, and the New England School of Metalwork in Auburn, Maine.

“We now have members in 18 countries,” noted ABS Webmaster Dan Cassidy, “and it is not unusual for my wife Sally and I to communicate with our ABS members around the world in Spanish, Portugese and French on a routine basis. The Internet makes all of this possible today.”

Cassidy credited ABS master smith and new ABS president Joe Keeslar with making the new school possible. Winner of the 2013 BLADE Magazine Industry Achievement Award, Keeslar has been a groundbreaker in bringing modern bladesmithing to both France and Belgium. “Joe was the one who made all the arrangements for the new school,” Cassidy noted, “and it was done over the course of more than a year.”

For information on dates, tuition and accommodations for the new school, contact [email protected], [email protected] or [email protected].

For the latest in knife news, stay tuned to www.blademag.com.

New BLADE on Newsstands Today!

The knives from the Battle of Gettysburg, the best EDCs for your money, the blades of summer and the hottest flipper folders are but a sample of the topics covered in the new BLADE® (www.blademag.com), on newsstands TODAY!

On the eve of the battle’s 150th anniversary, we caught up with Paul Shevchuk, museum specialist at the Gettysburg Museum of the American Civil War. He was most forthcoming in providing pictures of and information about the knives, bayonets and other edged tools used by both sides in Pennsylvania in 1863. From a Confederate saber bayonet found on a Gettysburg street after the battle to side knives, pocketknives, D-guard bowies and more, Shevchuk’s contributions to the story make for an enlightening glimpse on how soldiers on both sides used their knives during the War Between the States.

Joe Kertzman tapped the know-how of a number of industry experts to get the lowdown on today’s best EDCs for the money. From the damascus and ebony of the Boker Plus Damascus Gent II—this issue’s cover knife—to the CRKT Carajas designed by Flavio Ikoma and many more, you’re bound to find an EDC that fits your pocket and pocketbook.

The Boker Plus Damascus Gent II graces the cover of the new BLADE®.
The new BLADE® features the Boker Plus Damascus Gent II on the cover.

Speaking of EDCs, it’s always good to know what the legal ramifications are when you carry a knife. Mike Haskew consulted such industry authorities as attorney Evan Nappen, AKTI Executive Director Jan Billeb and Knife Rights’ Doug Ritter for their recommendations on what you need to consider when you carry a knife.

With the beginning of summer mere days away, it’s time to replenish your summertime blade array. James Morgan Ayres suggests any number of ways to do it—including camping, picnic and just about every other knife need in the good ol’ summertime—in “The Blades of Summer.”

There are many more entertaining stories in the new BLADE (www.blademag.com). Check it out on newsstands NOW!

 

Fairbanks Knifemaker Gets Good, Solid Press!

Fairbanks, Alaska, knifemaker Mark Knapp not only built and reportedly patented a cool .1911 Combat Survivor Knife, but he recently received some well-deserved press on the piece. For more combat and survivor knives, click here.

If any of you are familiar with Mark and his work, he fashions some high-art, yet utilitarian fixed blades and folders with “mosaic” handles of exotic natural materials from Alaska and around the world. He forges his own damascus, is a full-time maker and built his first knife in 2000.

The article first ran at www.newsminer.com, a domain of the Fairbanks Daily News – Miner, on Monday, March 18, 2013. Click here to read the feature article. 

 

The Bermans: Valued Friends of Custom Knives

Shelley and Sarah Berman long have been champions of custom knives. (Dave Harvey photo)
Shelley and Sarah Berman show off some of the custom knives in their collection. (Dave Harvey photo)

The custom knife industry has few better friends than Shelley and Sarah Berman, and that point was driven home once again when Shelley wrote about custom knives in the May 31 issue of The Wall Street Journal.

A long-time comedian and actor, Shelley penned the story titled “The Comedian in the Tomato Patch” in the WSJ edition that appeared the Friday of the 2013 BLADE Show & Living Ready Expo (www.bladeshow.com). An accompanying picture showed Shelley and Sarah working the tomato patch in their garden. While Shelley started off talking about his garden, he wrote more about his custom knife collection and damascus steel than anything.

“I collect custom knives,” he wrote in the WSJ story. “In many cases, I know—or knew—the maker. Many of my knives are one of a kind. Some of the great knifemakers are no longer with us. Some of the younger knifemakers are fine at the trade, though many of us old-time collectors still respect and revere the ones we’ve known … One section of the knives in my collection is mostly damascus process. In every case, one side of the blade has an almost scattered pattern, but, oh, what a blade. Frankly, I am very proud of my knife collection.”

Shelley’s affinity for custom knives is well known to many BLADE (www.blademag.com) readers and many in the custom knife industry. He has written stories about his knives and has been interviewed about his collection in BLADE. He has attended any number of custom knife shows over the years, including the California Custom Knife Show, the Solvang Custom Knife Show, the Art Knife Invitational and the Knifemakers’ Guild Show. In fact, he has performed his comedy act at a number of knife shows, including a most memorable performance at the 25th Anniversary Guild Show in Orlando, Florida.

Hats off to Shelley and Sarah Berman—two class acts and valued friends of the custom knife industry.


Read more about custom knives in the new Knives 2014 book.

 

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement