Home Blog Page 305

Juggling Knives for Christmas quick vid

I got some juggling knives for christmas… and I decided to film it. It was a crappy camera but it’s ok. I’ll have a better one soon! 😀

Tuesday’s Knife

The latest entry in Blademag.com’s “Knife Of The Day” series, the model 7080 Natural 2 is a Pat and Wes Crawford design for Columbia River Knife & Tool.

Manufactured to be as close to a custom knife as possible, the assisted-opening folder features a 3.25-inch blade of 8Cr13MoV stainless steel and a Micarta® handle. Closed length: 4.38 inches. Weight: 6.3 ounces.

For more information on how to get your Natural 2, visit http://www.shopblade.com/product/the-natural-2-7080/?r+ssfb221111#X3349

10 Little Indians Multi-Blade Knife

Never having made a knife with over six blades, even multi-blade maestro Gene Shadley was challenged to reproduce a 19th-century sportsman’s knife based on a 10-blader made by Christopher Johnson & Co. of Sheffield, England.

      Engraver Simon Lytton provided the old catalog Shadley selected the pattern from, which Shadley made larger than the original (5 7/8 vs. 3 5/8 inches closed). The knife required a locking master blade and a lockbar—neither were on the original—as per customer order. Hence, Shadley had to redesign the knife from the ground up, making nine blades work in slip-joint fashion along with having to figure out how to make the master blade work as a lockback.

      The band in mid-handle, another first for Shadley, was also by customer request. Shadley had to make new rear bolsters to accept the tweezers and ivory toothpick. Even the file is different than anything he had done, requiring a knurling tool for the double grooves. The customer wanted no blade wobble, so Shadley made the lockback work with minimal tension, and installed bushings for all the blades to control the amount of play in each.

      Shadley said he had orders for two more 10-bladers and planned on making a large exhibition knife with probably somewhere between 12-to-15 blades that he hoped to display at the Solvang Custom Knife Show April 28, 2012.

 

For more information contact Gene Shadley, 209 NW 17th St., Grand Rapids, MN 55744 218-244-8628 or 218-999-7197 [email protected].

 

To read like stories like this and the latest on knives, knifemakers, knife news and more, subscribe to BLADE® by clicking on http://www.shopblade.com/category/magazine-issues

 

PICTURE CAPTION

 

Gene Shadley took the 10-blader without the sambar stag scales (top) to the 2010 New York Custom Knife Show “to show it off” and for photography, then took the completed version to the ’10 Guild Show, where Point Seven photographed it in a multiple exposure with the scale-less image (you can see the lockbar on the spine of the scale-less version). Blade steel: ATS-34 stainless. His list price for a similar piece: $10,000. (Point Seven photo)

Knife Of The Day

Here’s a new feature for ya’: the Knife Of The Day. The first one in this new feature is Bill Kirkes’ utility hunter in a handle of amber stag and 4.5-inch blade of 5160 carbon steel. The fittings are stainless. Overall length: 9 inches. Mr. Kirkes also made the inlaid sheath.

For more information contact Mr. Kirkes at 235 Oaklawn Circle, Little Rock, AR 72206 501-551-0135. (No website or e-mail info available.)

To see more great knives like this one and others, click on http://www.shopblade.com/category/magazine-issues to subscribe to BLADE®.

How Individual Makers Can Tap New Markets

In the November BLADE®, “Unsheathed” outlined the Custom Knife Collectors Association/Jerry Fisk Cutlery Challenge and its potential for tapping new knife markets. Since then, maker Kevin Hoffman’s “I Am The Walrus” art knife placing fourth in the Art Kudos International Juried Art Competition & Exhibition is instructive in showing how individual makers can enter their knives in art competitions and, thus, expose their work to new markets as well.

      Why is exploring new markets important to custom knife enthusiasts, makers and others in the industry? For one thing, new markets mean more exposure to new buyers/collectors, and thus more potential demand for custom knives—and such increased demand translates into more value placed on all custom knives.

      Over 400 artists from 23 countries entered 1,251 individual works in the Art Kudos competition. From these, 157 artists were chosen. Of them, a mere 10 won awards, including Hoffman (http://www.artkudos.com/2011/awards.html).

      Kevin subscribes to several art publications—including ARTnews and professional artist and metalsmith magazines—and belongs to the Society of North American Goldsmiths (SNAG), all of which publish “calls for artists” and art competition announcements. “There are lots of other art publications that you can find on the newsstand,” he added. “There are dozens of art competitions all over the world at any given time, and it’s a matter of finding ones that you qualify for or that your work will fit the criteria for, and entering. I chose this one because I thought my work might be a good fit.”

      He added that the Art Kudos competitions, which are conducted on the Internet, have a very user-friendly application process, including an on-line submission procedure. “Each competition has their own entry process, although it’s becoming easier with the advent of digital photography and the Internet, and a lot of the entries are now made on-line and the competitions accept digital images,” he observed. Unlike some competitions that require submission of the actual knife, Art Kudos allowed Kevin to submit a digital image of the knife and keep the real item for simultaneous exhibit and possible sale at knife shows. “I knew the Art Kudos competition would overlap with the Knifemakers’ Guild Show, and I wanted to be able to exhibit the knife at the Guild Show, too,” he explained.

      This is not to say, given the proper venue and exposure, Hoffman rejects competitions that require keeping the knife for extended periods. “Very often, new competitions or new competitions in new areas are for a period of time, even years, and are more of an exercise in the education of a new audience rather than being good sales venues,” he observed. “Nevertheless, I think it’s important to explore new markets that haven’t seen this type of work before.”

      Hoffman stated it is better to find a competition that fits the maker’s designs than for the maker to design a knife for a specific competition. “You have to find the competition that your work fits the criteria and style of,” he stressed. “In the art world, it doesn’t make sense to make work specifically for a given competition because the deadlines are usually too short for that, and short deadlines aren’t conducive to producing truly good work. You have to choose competitions that your body of work fits into. Some competitions only want paintings, others only want 3-D works, some only photography, some only allow sculpture but not jewelry, or vice versa. Some competitions are open only to artists from a certain region.

      “As for what type of knives to enter, it probably depends on the type of competition and on the preferences of the person doing the judging. In general, I’d say the more [artistic] knives probably have better prospects, although I’ve had some luck with utilitarian knives as well. You just have to read the rules and, if there are specific categories, submit only in the one that your work fits the criteria for. For instance, don’t try to enter a competition that is accepting entries only for two-dimensional works unless you’re entering a painting of a knife.”

      He added there is often a small entry fee. It is used to pay the person or people doing the judging, and, if any are given, to pay for the prizes for the winners.

 

PICTURE CAPTION

 

Kevin Hoffman’s “I Am The Walrus” placed fourth in the Art Kudos competition, and features a damascus blade and walrus-oosic handle. He sculpted the walrus-head-and-tusks guard from wax and then lost-wax cast it in 7.5 ounces of sterling silver. Contact Hoffman at 912-920-3579 [email protected]. He will write a chapter on lost wax casting in the second edition of Krause/F+W Media’s upcoming book, How To Make Knives. (photo courtesy of Kevin Hoffman)

 

To subscribe to BLADE, click on http://www.shopblade.com/category/magazine-issues

 

Fight Anti-Knife D.A., Attend NY Custom Knife Show!

One of the oldest and best custom knife shows begins today at the Westin-Jersey City Newport Hotel with the commencement of the 34th Annual New York City Custom Knife Show in Jersey City, New Jersey.

The show runs today through Sunday.

Why is the New York City Custom Knife Show in New Jersey, you ask? Until last year the show was in the Big Apple—but that was before Manhattan D.A. Cyrus Vance began his illegal, oppressive witch hunt of legal manual-opening knives, mislabeling them as gravity knives, switchblades, etc.

Show your disapproval of Vance’s criminal behavior by attending the NYC Show. Not only will you be spitting in the face of a pox on knives, you will see some of the world’s best custom knives.

For more information visit www.nyckshow.com.

The accompanying picture is of the Bladeart booth at the 2011 BLADE Show.

2012 Hammer-In Schedule for the American Bladesmith Society Announced

0

The 2012 ABS Hammer-In schedule has been released and the American Bladesmith Society will sponsor weekend Hammer-Ins and Youth Programs and in North Carolina, Kansas, Ohio, Arkansas, Maine, Tennessee, and California. The 2012 events schedule is listed below and when more information is available it will be posted on the ABS website at www.americanbladesmith.com and here on the ABS page.

March 9-11, 2012

Great Smoky Mountain Bladesmithing Symposium & Knife Show
Haywood Community College, Clyde, North Carolina
ABS Contact – Bill Wiggins (828) 226-2551 or Email [email protected]

April 28 and 29, 2012

Spring Piney Woods Hammer In
Texarkana College – Moran School of Bladesmithing, Washington, Arkansas
ABS Contact – BR Hughes (903) 838-0134 or Email [email protected]

June 22, 23, and 24, 2012

ABS Youth Hammer-In
Smoky Mountain Knife Works, Sevierville, Tennessee
ABS Contact – Houston Price (865) 397-0053 or Email [email protected]

July 13, 14, and 15, 2012

New England Hammer-In
New England School of Metalwork, Auburn, Maine
ABS Contact – Mace Vitale (203) 457-5591 or Email [email protected]

August 24, 25, and 26, 2012

Mid America Hammer-In
Miami County Fairgrounds, Troy, Ohio
ABS Contact – Butch Sheely (419) 832-5801 or Email [email protected]

September 15 and 16, 2012

Fall Piney Woods Hammer-In
Texarkana College – Moran School of Bladesmithing, Washington, Arkansas
ABS Contact – BR Hughes (903) 838-0134 or Email [email protected]

October 6 and 7, 2012

Heartland Hammer-In
Washburn Institute of Technology, Topeka, Kansas
ABS Contact – Steve Culver (785) 484-0146 or Email [email protected]

October 19, 20, and 21, 2012

California Hammer-In
College of the Sequoias, Visalia, California
ABS Contact – Mike Vagnino (559) 636-0501 or Email [email protected]

October 20 and 21, 2012

Smoky Mountain Fall Hammer-In
Haywood Community College, Clyde, North Carolina
ABS Contact – Bill Wiggins (828) 226-2551 or Email [email protected]

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement