The second knife show of the year in Janesville, Wisconsin.
Knife Profile: Shrike Out Hits A Home Run
Scott Topper’s off-the-charts out-the-front is a multi-part marvel, the Shrike Out, brings an artistic twist to the automatic.
It’s hard not to like the Shrike, a custom out-the-front dual-action automatic by Scott M. Topper.
The blade is cryogenically treated AEB-L stainless steel. According to Scott, since AEB-L’s micro-structure allowed for a finer edge, it originally was a go-to steel for disposable razors. He indicated the version of the material he uses competes well against crucible steels, and is made through a conventional metallurgy technique.
The six inside springs are hand wound stainless steel. The four locks are independent. The brown lock parts are Teflon-impregnated Delrin for permanent lubricity. The black Richlite scales are inlaid with white to add contrast to the engravings.
The knife comes nested in a velvet-lined walnut box. Plain and all-stainless versions of the Shrike are also available. According to Scott, the various styles of the knife are available through the PVK Showroom (888-878-5643 pvk.com) in Las Vegas.
Shrike Out Specs
Knife: Shrike Out The Front Dual Action Auto
Blade length: 4”
Blade steel: Cryogenically treated AEB-L stainless
Frame material: 416 stainless steel
Handle material: Paper phenolic composite
Closed length: 5”
Also Read:
- Ballistic Knife: The Most Illegal Knife In America
- Spike Tomahawk Reviews: RMJ Tactical, Cold Steel, SOG, Browning
- A Quick History Of The Tomahawk In The United States
- 11 Tips For Starting A Knife Shop At Home
CRKT Drops Five New Knives At BLADE Show West
Knives showcase Richard Roger’s design prowess.
BLADE Show West hasn’t only grown to become one of the largest knife shows in the West, it’s also become a prime venue for late-season knife drops. With a bevy of new designs, CRKT has a bevy of new blades it plans to unveil to the public in Salt Lake City.
In all, the Oregon-based company will release five knives at the Salt Palace Convention Center, fittingly coming from a premiere Western knifemaker. Richard Roger’s prime gig New Mexico cattleman, but over the years has become a well-known custom maker whose designs perfectly combine clean lines, practicality, as well as eye-catching use of materials.
The folder specialist’s knives are meant for use, but dang, if they aren’t pretty enough to show off.
Here’s a gander of what Rogers and CRKT have cooked up for BLADE Show West.
CRKT Q
The limited-edition Q—based on Roger’s custom knife of the same name—has everything you want in a small-batch knife—chief among them, top-notch materials. The frame lock marries a titanium handle with carbon fiber inlay with a 3.31-inch MagnaCut steel blade. The lines on the drop-point knife are positively dialed in, with the point of the blade directly aligning with the pocket clip when deployed. The blade is put into action via a kicker. Topping off the Q is a floating backspacer that adds a splash of detail and hints at the knife’s premium nature, but otherwise, the Q remains perfectly understated. MSRP: $225.
CRKT Q Compact
Dang near identical to the Q, the compact model is simply scaled down for easier EDC carry. At 4 inches closed and only 2 ounces in weight, it fits the bill as an easy-to-tote option. The materials are different from the full-sized model, with an S35VN blade and a lightweight aluminum handle with G10 inlay. As well as, the small fry is also a liner lock. MSRP: $195.
CRKT Persian
Building on a fan-favorite Rogers classic, the upgraded Persian takes all the great features of the original and cranks them up a notch. The blade’s new “harpoon Persian” shape is eye-catching, and it’s crafted from tough MagnaCut steel, known for its superior strength, wear resistance, and corrosion protection. The titanium handle is lightweight, with a cool milled pattern inspired by Richard’s custom design. Made in Italy by Lionsteel Knives, this limited-edition folding knife is a must-have for collectors. MSRP: $275.
CRKT Pup
After the success of his CEO folding knife, Richard Rogers is back with the Pup, a compact everyday carry with smooth, rounded edges that slip easily into a pocket or purse. Built for modern life, it’s unobtrusive but ready to perform. The Pup comes in two models: a flipper with IKBS™ bearings, an AUS 10 steel blade, and a glass-reinforced nylon handle, or an Italian-made slip joint with a Super Dense Twist™ Damasteel® blade and a titanium handle with carbon fiber inlay for strength and style. MSRP: $70 and $275 respectively.
Check Out Our Knife Reviews:
- Oknife Beagle Review
- Versa Rescue Knife Review
- Knife Review: CRKT Bamboozled
- M-1 Folder Review: How Good Is This Folder?
BLADE Show 2023: What To Expect In Atlanta
BLADE Show 2023 is just around the corner. Here’s what to look out for at the “World’s Greatest Knife Show!”
If the third time really is the charm, then BLADE Show 2023 is smack dab in the middle of charm’s way.
Why? Because it’s the third BLADE Show after the one that was cancelled in 2020 as a result of the pandemic, and most all travel restrictions instituted even as late as last year’s BLADE Show have been lifted. That means a full return of international knife exhibitors and fans in addition to all those domestic are expected to make the 42nd annual rendition of the world’s most important knife event the biggest and best ever.
Sponsored by Smoky Mountain Knife Works, the BLADE Show is where more knives—new, old, custom, factory, etc.—are exhibited, bought and sold than at any other knife event. Almost 930 exhibitors* from every continent but Antarctica were scheduled to exhibit at press time, all bringing their latest and greatest knives and other edged tools, accessories, knifemaking supplies and more. Factory and custom knives, sharpeners, knife collections, knife purveyors and other cutlery entities too numerous to mention will showcase their wares as the world knife community makes the yearly pilgrimage to the Cobb Galleria Centre.
BLADE Show Overview
WHAT: BLADE Show
WHERE: Cobb Galleria Centre, Atlanta
WHEN: June 2-4
DAYS and TIMES:
- Friday, 11 a.m.-6 p.m. (early bird ticket holders can enter at 10 a.m.)
- Saturday, 9 a.m.-6 p.m.
- Sunday, 9 a.m.-2 p.m.
Get Your BLADE Show Tickets
The latest, hottest custom knives, factory knife debuts, the educational knife instruction class schedule of BLADE University and action-packed free demos are among the sharp goodies awaiting hordes of show patrons. The BLADE Magazine 2023 Knife-Of-The-Year® Awards, the custom knife judging competition and the knife collection display judging competition are others. The ABS Knife Auction, formal inductions of the latest members of the BLADE Magazine Cutlery Hall Of Fame®, and some of the best knives the ABS and the Knifemakers’ Guild and unaffiliated makers in general have to offer are still others.
And don’t forget The Pit, the after-hours meeting place in and around the sunken bar of the host hotel, the Renaissance Atlanta Waverly, where show patrons and exhibitors will congregate into the wee hours beginning the night before the show through the end of the weekend to compare knives, swap lies and otherwise celebrate the year’s most momentous cutlery weekend.
BLADE University
Avail yourself of the latest knifemaking techniques and other trending sharp subjects during the 10th Annual BLADE University show Friday and Saturday.
Sponsored by Work Sharp Sharpeners, BLADE University has the most extensive schedule of knife, knifemaking and other instruction held at any knife show. Among the highlight classes for 2023 are “CRKT Presents Q&A with Michael Walker” featuring the industry renowned creator of the linerlock; “Designing Kitchen Knives” and “How To Run A Successful Knifemaking Business” with chef’s knife maestro Bob Kramer; “Exploring the Performance of Pattern-Welded Steel,” with damascus forging legend Devin “Hoss” Thomas and his son, internet steel guru Larrin Thomas; and many more.
BLADE University Schedule
FRIDAY
- 8-9:30 a.m. Fundamentals of Grinding, The Courtyard. AmeriBrade and guest makers cover grinds, technique and different equipment.
- 10-11 a.m. Exploring the Performance of Pattern-Welded Steel, Room 103. Devin and Larrin Thomas review their experiments on the strength, toughness and edge retention of damascus steel.
- 10:30 a.m.-12 p.m. Designing Kitchen Knives, Room 104. ABS master smith Bob Kramer discusses considerations to ponder when designing kitchen knives.
- 1-2 p.m. CRKT Presents Q&A with Michael Walker, Room 104. BLADE Magazine Cutlery Hall-Of-Fame® member Michael Walker answers questions on the linerlock he developed in 1981, the evolution of the many other locking systems he designed post-linerlock and more.
- 1:30-2:30 p.m. Dancing with the Devil: Algorithms, SEO and Ecommerce, Room 103. Ben Petersen explains how to sell knives online and build your brand while navigating Google, Amazon and Meta.
- 2-3 p.m. What’s Hot in Knife Steels, Room 103. Join representatives from Mike Norris Damascus, Nichols Damascus and Vegas Forge as they discuss today’s hottest steels and why those steels are so much in demand.
- 3-4 p.m. Forging Ancient Materials and Why It’s Important Today, Room 107. Award-winning knifemaker Ilya Alekseyev and friends explore how and why practicing forging methods used by the craftsmen of old translates into modern materials.
- 3:30-4:30 p.m. Hands-On Knife Sharpening, Room 113. Bring your knife or a borrowed one and learn the progression of shaping a bevel, sharpening and edge maintenance from the team at Work Sharp Sharpeners.
- 4:30-5:30 p.m. Unlearning Bad Habits: My Unique Path to JS, Room 107. Matt Stagmer focuses on makers that have been in the craft for many years, and how becoming an ABS journeyman smith differs from someone learning those standards from day one.
SATURDAY
- 8:30-9:30 a.m. Decorative Custom Knife Filework, Room 113. Knifemaker Kyle Daily of KHDaily Knives shows you his preferred files and the equipment he uses to make his five most popular filework patterns.
- 8:45-9:45 a.m. How To Forge a Hunting Knife, The Courtyard. Using his propane forge, ABS master smith Timothy Potier demonstrates how to forge a full-tang drop-point hunter.
- 9:30-11 a.m. How To Run a Successful Knifemaking Business, Room 104. ABS master smith Bob Kramer shares his 35 years of experience running a successful knifemaking business.
- 9:45-10:45 a.m. Reproducing Traditional Pocketknives, Room 107. Tim Robertson covers patterning traditional slipjoints from original factory knives in detail, including methods of disassembly, correct scribing techniques and proper hole layout.
- 11 a.m.-12 p.m. 3D Printing for Canister Patterns, Room 113. ABS master smith Steve Schwarzer and Ron Hardman show you how to use this game-changing advancement to forge patterns on a budget that were previously unthinkable.
- 2-3 p.m. Let the Pros Critique Your Knife, Room 104. Award-winning knifemakers Lucas Burnley, Luke Swenson and Devin Thomas, and ABS master smiths David Lisch and Mike Quesenberry examine your knife, tell you what’s good about it, what’s not and how to make it better.
- 2:15-3:15 p.m. Hands-On Knife Sharpening, Room 113. Bring your knife or a borrowed one and learn the progression of shaping a bevel, sharpening and edge maintenance from the team at Work Sharp Sharpeners.
- 2:30-3:30 p.m. Writing for a Knife Publication, Room 107. Author/ABS apprentice smith Jason Fry and a panel of industry insiders share the tips and tricks it takes to get into the knife writing game.
- 4-5 p.m. Folder Design, Room 104. David Carver of Carver Knife Co. teaches techniques on making a folding knife that works well, looks good and feels great in the hand/pocket.
Enroll In BLADE University Classe Now!
World Cutting Title
The BLADE Show World Championship Cutting Competitions will be conducted by BladeSports International (BSI) and held in The Courtyard, the parking lot of the host hotel, the Renaissance Atlanta Waverly, Saturday at 4:30 p.m.
At press time, contestants in both men’s and women’s divisions were scheduled to compete. Last year, James Clifton won the men’s division and Terri Lynn the women’s.
Knives Of The Year
The BLADE Magazine 2023 Knife-Of-The-Year® Awards will be announced and presented during the BLADE Magazine Awards ceremony Saturday night in The Pit.
The entries are limited to BLADE Show factory booth exhibitors, and will be on display show Friday and Saturday under glass in a special locked cabinet in the lobby. The winners will be announced on BLADE’s here after the awards presentation, and a list will be posted outside the show entrance Sunday morning.
The award categories are: Overall; American-Made; Imported; Most Innovative American Design; Most Innovative Imported Design; Best Buy Of the Year; Investor/Collector; Collaboration; Manufacturing Quality; Accessory; Kitchen; Publisher’s; and Industry Achievement.
Custom Knife Judging
Leading industry authorities will pick the best custom knives by BLADE Show exhibitors in the annual knife judging competition, with the winners announced during the BLADE Magazine Awards ceremony Saturday night in The Pit.
The categories: Hugh Bartrug Best Of Show; Best Fixed Blade; Best Damascus; Best Kitchen Knife; Yvon Vachon Best Miniature; Best Art Knife; Best Fighter; Best Bowie; Best Handle Design; Best Tactical Folder; Best Utility Hunter; Best Folder; Most Innovative Design; Best Knife Collaboration; Best Sword; Best New Maker; Best Of The Rest; and a new BLADE Show category: Best M.A.C.K. (Machine Assisted Custom Knife).
The competition is open to the show’s custom knife exhibitors only. The winners will be announced on BLADE’s blademag.com website after the awards ceremony, and a list will be posted outside the show entrance Sunday morning.
Seminars & Demos
Seminars and demonstrations will be held in classrooms inside the Cobb Galleria or in The Courtyard, or under The Courtyard’s BLADE University tent. Admission is free to BLADE Show ticket holders.
Among the highlights will be “Knowledge Destroys Fear” presented by Ernest Emerson, CEO of Emerson Knives, Inc. Ernest will share the secrets of how Navy SEALs, Special Forces, Rangers and U.S. Marines conquer fear and thrive and prevail in the face of extreme life-threatening danger. Another highlight will be “Seeking Safety in Knife Design” with BLADE® field editor Ed Fowler. Ed will outline how to use knives efficiently and safely and what to look for in knives that cut effectively, do so without causing hot spots, and otherwise aren’t accidents waiting to happen in and of themselves.
Cutlery Hall Of Fame®
The BLADE Magazine Cutlery Hall Of Fame® will formally induct three new members at 8 a.m. show Saturday in the Kennesaw Room of the Renaissance Atlanta Waverly Hotel. (At press time, the new members had not been determined.) Tickets are required ahead of time for the ceremony, which includes a breakfast. Seating is limited. For ticket information, email [email protected].
Knife Colletions
Outstanding knife collections will be on display, with the best recognized via a judging competition. Last year’s winners: Larry Oden, Best of Show for “Buck Factory Production Knives of the 1960s.” Judges awards went to Gene Merritt for his “Yellowhorse” display of David Yellowhorse knives and Bruce Cannon for “Paul Bos: Alloys’ Greatest Ally.” Natalie Lindsey won the Youth Award for “Tinkerbell and Friends Put the Magic in BCCI and Buck Knives.”
Bali Championship
Top balisong flippers will vie for the title of “Grand Master” in the 7th Annual Battle for Bali-Champion sponsored and conducted by Blade HQ.
The top three finishers will receive prizes and all participants will get swag bags. The competition will be limited to 48 contestants.
BLADE Show ticket holders are invited to watch the competition in The Courtyard under the BLADE University Tent on show Saturday from noon to 2 p.m. Competitors will start flipping knives at 12:30 p.m.
BLADE Show Seminars And Events
SATURDAY
- 8 a.m.: BLADE Magazine Cutlery-Hall-Of-Fame inductions, Kennesaw Room, Renaissance Atlanta Waverly Hotel: Buy Cutlery Hall Of Fame Tickets
- 10-to-11:45 a.m.: ABS Knife Auction, Room 103
- Noon-to-1 p.m.: Knowledge Destroys Fear—Ernest Emerson, Room 104
- Noon-to-2 p.m.: 7th Annual Battle for Bali-Champion—Blade HQ, The Courtyard (the actual competition starts at 12:30 p.m.)
- 1-to-2 p.m.: Seeking Safety in Knife Design—BLADE® field editor Ed Fowler, Room 107
- 12-to-3 p.m.: Buck Collectors Club, Room 103
- 4:30 p.m.: BLADE Show World Championship Cutting Competitions, conducted by BladeSports International in The Courtyard
Editor’s note: Microtech Knives and Heretic Knives are the presenting sponsors for BLADE Show 2023. RoseCraft Blades is The Pit sponsor. Work Sharp Sharpeners sponsors BLADE University. The other sponsors are Hogue Knives; Reate Knives; Nottingham Tactical; QSP Knife; Zac Brown’s Southern Grind; WE Knife; Glow Rhino; Columbia River Knife & Tool; and Artisan Cutlery.
Read More About The Blade Show:
- 2022 BLADE Show Knife-Of-The-Year® Award Winners
- 2022 Blade Show Custom Knife Award Winners
- BLADE Show West 2022: A Salt Lake Surprise
- 2023 BLADE Show Texas Factory And Custom Award Winners
A Dazzler For Kaz
A Father, With The Help Of His Uncle, Works To Make A One-Of-A-Kind Knife For His Son After Living The Life Of A Military Kid.
The hardest question for my son Zachary “Kaz” Kazmir to answer is “Where are you from?” His answer usually falls along the lines of, “Home is where the military takes your family.”
Zach’s answer is true for just about any token “military brat.” Military families often move every two to three years—that’s a rate of 10 times more than average civilian families. Living this kind of life for a child requires tremendous resilience, exceptional adaptability, and an uncommonly high maturity level. Zach would repeatedly get settled in a routine, a school, a friend group, and community activities, only to pick up, leave it all behind and start fresh again.
Oh, and the trials of life do not stop there. He persevered through my frequent deployments, earthquakes, accidents, and even a direct hit by one of the strongest tornadoes ever recorded while he was living in Moore, Oklahoma. Zach’s life led him on a journey spanning two countries, four states, and five schools.
I wanted to give the young man something special on the occasion of his 21st birthday. Even with all the places he’s lived and the experiences he’s had, Zach’s fondest memories always gravitate to his time in Okinawa, Japan. The first memories of his life were created there. Okinawa will forever hold a special place in his heart. With that, I set out to have a knife crafted in hopes of capturing and honoring these priceless memories for him.
Uncle Stanley
I could think of no better place to turn for such a task than my uncle, Stanley Buzek. Uncle Stanley is a knifemaker from Caldwell, Texas, and is most certainly the right man for the job. There’s no one I know who puts as much heart into his craft as Uncle Stanley. He guided me through the many options, and I closed in on what would become the most meaningful and elegant 4.5-inch, two-blade Texas trapper I’ve ever seen.
My uncle crafted the frame and liners from raw bars of integral 416 stainless steel. As with each of his knives, he added a personal touch to the spine. This was truly amazing to witness. I’ve seen many of his finished knives over the years, but I hadn’t realized the level of precise craftsmanship he put into the pieces that non-makers like myself often take for granted. Most of us just naturally look to the business end of a blade.
In thinking of the knife for this gift, I aimed to give Zach a glimpse into his resiliency through my eyes. He has been stretched so thin that at times his only choice to keep from breaking was to fold over in the fetal position to regain his strength. He’s been heated, hammered, pressed to the edge of his capabilities, put back in the fire, crushed, bent beyond his limits, beaten down even more, and subjected to unrelenting pressures in different directions.
Nonetheless, he emerged from the fire stronger than ever before, with a character that can only be described as beautiful—just like the banding and mottling of damascus. The beautiful steel forged by Bill Poor couldn’t be more fitting for this knife. Bill transformed raw 1084 carbon and 15N20 nickel-alloy steels into an extra-fine River of Fire pattern with elaborate feathering that perfectly captures how I view Zach’s coming-of-age: indicative of many intense moments, but not scarred. Instead, radiating with a unique, luxurious magnificence that exemplifies resilience.
Making The Knife Handle
The next essential element on my mind was the scale material. (I called it the “side of the knife” but you know how knifemakers are about educating the ignorant.) The scales had to be more than just the perfect material, they had to be uniquely sourced. I wanted my son to have a literal piece of his childhood that he could hold in his hands whenever he wanted.
I reached out to a military friend stationed in Okinawa to acquire a piece of one of the famed, colossal banyan trees from the island. With travel restrictions, import/export regulations on agricultural items, and COVID-related shipping delays, it proved much more difficult than we expected. However, my contact was able to come through! After nearly a year, a heavily worn, 5-by-10-inch piece of banyan tree finally arrived in the mail.
Uncle Stanley was reluctant to use banyan. He cautioned me not to get my hopes up because he knew how challenging it can be to properly stabilize such a soft wood. In addition, the sample was very weathered, extra-soft, and had several deep cracks inflicted in transit during shipping. In other words, there wasn’t a lot of room for error!
Uncle Stanley sent the wood to the very capable Terry Dunn of TNT Enterprises, and I was truly blown away by what he was able to do. Dunn not only stabilized the wood, he preserved its beautifully subtle grains and the small, intricate pitch pocket. The latter is a cavity in the wood where the tree suffered some sort of damage over its life, or a small knot of sorts if you will.
Stanley assembled the sleek trapper, affixed the scales, and presented me with a truly remarkable knife. Then he took it from my hands and said, “Now it’s time to go get it ‘scratched up.’”
Engraving The Knife
A slight fear came over me. I worried that an engraver could potentially damage this work of art. However, the worry left me as quick as it came when I learned the engraver was Alice B. Carter. I’ve seen her amazing work in the past. I knew she could add another layer of beauty to the piece.
To my surprise, Alice asked so much more than, “What would you like me to engrave?” She had an authentic interest in the story of the knife and its eventual recipient. I think she asked me more about Zach than she did about art that day. I shared with her the things Zach tends to reminisce about from his time in Okinawa, and we honed in on a few specifics.
One of the first memories of his life is enjoying the annual Cherry Blossom Festival in Okinawa’s capital city of Naha. The festival draws crowds of thousands each January to see the city streets completely encased in the vibrant blooms. Zach also speaks of how massive he remembers the banyan trees being there. If you’ve never seen a 200-year-old banyan, the behemoths appear to be as old as time and so wide they seem to fill the sky with a majestic, towering presence as if from a fantasy movie.
Alice’s smile grew wider and wider as we continued to talk through a few other details. She drew inspiration from our chat and created an absolute masterpiece. Engraving for more than 40 hours and inlaying more than six feet of 24k-gold wire, she created so much more than a scene or picture. Her art marvelously captured the emotions connected to the memories.
Reaching from corner to corner on the upper bolster of the facing side shines the island of Okinawa in pure, radiant gold. The shading effect seems to literally draw the island’s shape out from the knife. Carefully inlaid in the exact location of Kadena Air Base where Zach lived on the island, a one-millimeter copper marker memorializes his time there.
On the opposite side in exquisite detail is an ancient, powerful banyan tree spanning from edge to edge. In a beautiful complement to the gold inlay, the banyan’s leaves are adorned with Alice’s self-alloyed green gold. Zach can view the upper bolsters in remembrance of the land he once knew.
As is customary in the military, a servicemember’s last name becomes his or her first name. It’s the military way. Kazmir was shortened to “Kaz” almost immediately, and that nickname stuck for the entire two decades I served. As Zach approached adulthood, he began to go by this moniker as well. The knife’s oversized shield brilliantly gleams “KAZ” in Japanese-styled English letters—an embodiment of how I’ve passed on my name to my boy.
Finally, the lower bolsters hold a personal message from father to son: Ichi-go ichi-e. Emblazoned in bold Japanese Kanji, the message is an idiom roughly translating to “for this time only.” It means that Zach’s experience in Okinawa was truly a once-in-a-lifetime episode that can never be duplicated, and he should treasure it forever.
Alice brought all the components together by incorporating gorgeous cherry blossoms engraved with intricate detail resulting in what I see as the perfect gift. Zach received it as a Christmas present and shed some heavy tears as I explained each element. He and I are both still amazed at how everyone came together to help me make this one-of-a-kind knife happen.
Uncle Stanley once told me that nearly every knifemaker is an expert at something, but no knifemaker is an expert at everything. He described knifemaking as a network of experts who bring their talents together to make the impossible possible. In the military, we have a term for this—it’s called synergy. With this beautiful piece, I’m convinced the knifemaking community is synergy at its finest.
For more information about the knife, contact Stanley Buzek, Dept. BL8, P.O. Box 621, Caldwell, TX 77836 346-412-2532 [email protected], s.buzekknives.com.
Read More
3 Awesome Axes for Chopping Wood Like a True Lumberjack
THREE FACTORY AXES TAKE THE CHOP, LIMB, TRIM, SHAVE AND STRIP TEST
BY JAMES MORGAN AYRES
We got snowed in one New Year’s in a rented cabin in the mountains. When I expressed concern about relying on electric heat in a remote cabin, the rental agent assured me that the electricity never went out. In any event, she said, “There was plenty of firewood for the fireplace and an axe. You’re an experienced outdoorsman. I’m sure you can cope.”
Of course, the electricity went out. I found about a cord of unsplit logs, each log 6-to-8 inches in diameter and 3 feet long. No split wood. No kindling. No axe. I batonned my ever-present Randall Model 1 around the edges of the logs to make kindling, and split enough wood to keep the fire going until the electricity came back on. Three days. I coped but every time I went to the wood pile, I wished I had an axe. Any of the axes in this field review would have been welcome.
Almost anything will chop softwood such as pine. For a proper challenge, we spent a day clearing madrone and oak at a friend’s property. Oak is a hardwood. Madrone is more fibrous and even tougher. We also split seasoned oak logs for our friend’s fireplace.
HIKING HACKER: The Fox Trekking Axe
The Fox Trekking Axe is a terrific chopper for the backpacker, hunter or woods wanderer. Reminiscent of a medieval design, it’s light enough to keep in a rucksack and very well made.
The thin blade came sharp enough to cut paper and kept its edge during a day’s work. Its good edge geometry and balance, comfortable and ergonomic handle—well, really, its overall efficient configuration, which I suspect was inspired by an old, well-proven design—enabled painless hours of chopping, limbing and trimming. The long edge worked well for stripping and shaving bark to make bare poles. I have no doubt that the Trekking Axe would serve to quickly erect a shelter against an incoming mountain snowstorm, or dress out and break down an elk carcass. With its long, almost knife-like edge, it could also skin out the elk.
The thin blade, so efficient at taking down saplings and other work, tended to bind when chopped into the center of the seasoned oak logs. That’s a matter of geometry—the blade is not wedge shaped and won’t serve as a splitting maul, which is outside of its design envelope. A change in method overcame that limitation. By working around the edges and splitting off sections an inch or 3 thick, we were able to reduce logs to kindling.
Overall it’s a well-designed, well-made tool that I wouldn’t hesitate to take to the deep woods.
SPECS: FOX TREKKING AXE
CUTTING EDGE: 5.625”
BLADE STEEL: 12C27 Swedish stainless
HEAD WIDTH: 4.7”
HEAD THICKNESS: .22”
HEAD FINISH: Satin
HANDLE MATERIAL: Sassafras (wood)
WEIGHT: 13.8 ozs.
OVERALL LENGTH: 13.8”
COUNTRY OF ORIGIN: Italy
MSRP: $104.95
THAT’S AN AXE: Cold Steel Trail Boss
I hefted the Cold Steel Trail Boss, chopped through a 3-inch madrone sapling with one swing and paraphrased Crocodile Dundee’s line: “That’s an axe.”
About the size of a traditional cruiser axe, the Trail Boss has a smooth, comfortable haft/handle in-between axe and tomahawk length. The long edge came sharp and stayed sharp. The head has good wedge-shaped geometry that made splitting the seasoned oak logs a breeze. Unlike a splitting axe, it was not too thick for general work. One whack to the center of the log and there were two split sections on the ground. It’s not a splitting maul or splitting axe but almost as efficient. While it has enough heft to split oak, it’s also light enough and balanced so that downing saplings could be done with full control and no danger of cutting through and swinging too far.
When limbing, it was easy to control for precise cuts, even when limbing with one hand. The haft is not as long as that of a full-sized axe, nor is the head as heavy. However, the head’s well-designed geometry, the smooth, comfortable handle and overall good balance enabled it to perform almost as well as one.
This is a good, all-around chopping tool—actually, an excellent all-around chopping tool.
SPECS: COLD STEEL TRAIL BOSS
CUTTING EDGE: 4.5”
BLADE MATERIAL: 1055 spring steel
HEAD WIDTH: 6.5”
FINISH: Black
HANDLE MATERIAL: Hickory
WEIGHT: 2 lbs., 9.5 ozs.
OVERALL LENGTH: 27”
SHEATH: Not Included
COUNTRY OF ORIGIN: Taiwan
MSRP: $49.99
FRANKISHLY SPEAKING: CRKT Cimbri
The CRKT Cimbri is an interesting design that, in my opinion, needs a bit of work to fulfill its potential. Modeled on a classic Frankish axe, with a nicely shaped head and a long handle, it is well balanced.
Unfortunately, the edge wasn’t sharp out of the box and we test all knives, axes, tomahawks, swords, etc., as they come, so there’s a level playing field for all. The lack of a truly sharp edge required more force to chop through the saplings and impeded its penetration when splitting. Also, the thick coating on the carbon steel head caused it to drag in a cut. Even more unfortunate, and for some reason I do not understand, the haft is squared rather than oval or round. The acute edges of the haft/ handle not only were uncomfortable, they dug into our hands, producing blisters—in one instance breaking the skin of one of our testers’ palms.
Tuning up the edge would be a simple job, a matter of 20 or 30 minutes with a good stone. Reprofiling the haft wouldn’t be difficult, but I cannot understand why anyone would put a squared handle on an axe. Historical authenticity, perhaps?
SPECS: CRKT CIMBRI
BLADE LENGTH: 4.09”
BLADE MATERIAL: 1055 spring steel
HEAD THICKNESS: 1.26”
FINISH: Manganese phosphate coating
HANDLE MATERIAL: Tennessee hickory
WEIGHT: 2 lbs., .8 oz.
OVERALL LENGTH: 25.75”
DESIGNER: Elmer Roush
COUNTRY OF ORIGIN: Taiwan
MSRP: $69.99
AUTHOR’S CHOICES
Which of the three would I choose if I were again snowed in and had only a stack of logs to burn? If I hiked in, the Trekking Axe would be my choice, no question. I’m too old to hump anything heavier in a rucksack filled with camping gear, food and ammunition. If I arrived by car or truck, the Trail Boss would be it. If I had only the Cimbri, I would use my belt knife as a draw knife to take off the corners of the handle and smooth it. That done, 20 minutes with a sharpening stone and I’d head for the wood pile.
“A-Z of Bushcraft” Makes a Knife in Sweden
The series “A-Z of Bushcraft” heads to Sweden to make a knife.
Must Read Articles
Knifemaking 101 – Read This Before You Make a Knife
by Wayne Goddard
My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
