BLADE Show

Hosted in Atlanta, Georgia in May or June every year, the BLADE Show truly is the World’s Largest Knife Show. It features the most diverse array of knives from manufacturers, knifemakers, collectors, dealers and purveyors, all under one roof. The BLADE Show plays host to the Blade Magazine Knife-Of-The-Year® Awards, the Blade Magazine Cutlery Hall of Fame© induction ceremony, seminars, demonstrations and much more.

Visit BladeShow.com for tickets, travel information, exhibitor registration and sponsorship opportunities.

AKTI Wins a Blade Magazine 2012 Industry Achievement Award®

The American Knife & Tool Institute (AKTI) won a Blade Magazine 2012 Industry Achievement Award® for stellar work in the area of pro-knife legislation at the recent BLADE Show (www.bladeshow.com) in Atlanta.

    Another organization receiving a Blade Magazine 2012 Industry Achievement Award was Knife Rights, also for its efforts in protecting Americans’ right to own, use and carry knives.

    Accepting the award on behalf of AKTI was AKTI Executive Director Jan Billeb (pictured above). “It was a real pleasure to accept the Industry Achievement Award from BLADE® Magazine on behalf of the AKTI Board of Regents and all members of the American Knife & Tool Institute who have diligently worked since 1998 to ensure that our liberties to make, own or use knives or edged tools have not been further restricted, and to successfully remove knife law restrictions.  We are pleased that BLADE Magazine recognizes the achievements of our organization on behalf of the knife industry and all knife owners,” Billeb said. “There is still a lot of work to be done to make reasonable and responsible changes state by state and we appreciate the support of the entire knife community.”  

    In May, the Louisiana governor signed AKTI-supported legislation that made it clear that a knife with a bias toward closure is not an illegal switchblade. Bias-toward-closure language is a concept that has stood the test of time since AKTI introduced it in California over a decade ago, an AKTI press release reported. Several states, including Texas and Kansas, have since adopted it, as well as it being incorporated into the Federal Switchblade Act. This language clarifies that assisted-opening knives are not classified as “illegal” switchblades or gravity knives. More information about the bias-toward closure-concept and AKTI’s past successes recognized by BLADE is available at www.akti.org

    AKTI is working with legislators in South Carolina to pass pre-emption language, Pennsylvania to remove all knife restrictions, Michigan to remove the switchblade prohibition and other restrictions, Alaska to incorporate the bias-toward-closure language, as well as in several other states to remove or lessen knife restrictions.

    In an interview after the ceremony AKTI President Bill Raczkowski commented, “Thanks to BLADE Magazine for honoring AKTI with an Industry Achievement Award acknowledging the proactive efforts of our organization. Our members sincerely appreciate the many ways that BLADE Magazine and the BLADE Show help us spread the word about the importance of AKTI’s efforts to keep knives in American lives.”

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb062812 for more information.

Bladesports World Championship Blade Show Atlanta, GA. 6/9/2012

0

A video of the cutting competition that took place during the Bladesports World Championship during the 2012 Blade Show at the Cobb Galleria in Atlanta, Georgia. 6/9/2012


BLADE Recommends

Before you can take part in a cutting competition, you need a firm grasp on how to make knives. The Complete Bladesmith by Jim Hrisoulas is the perfect book for just that.

Click here to check out this essential knifemaking book.

BLADE Show Updates Exhibitor Layout

The BLADE Show‘s new exhibitor layout is designed to improve the overall show experience for the thousands of patrons who will attend and the close to 750 exhibitors who will display the industry’s finest knives and knife accessories.

BLADE Show layout change designed to improve overall show experience. (PointSeven photo)
The new BLADE Show exhibitor layout is designed to improve the overall show experience. (PointSeven image)

The world’s largest knife show is set for June 6-8 at the Cobb Galleria Centre in Atlanta.

In the past, the rows of exhibitor tables were dissected by lines of factory booths in some areas, making it somewhat difficult to pick up where you left off from the previous table row. It also presented a somewhat choppy look to the overall setup.

When you walk into the show hall this coming June, a new layout will greet you. Instead of being dissected in some areas by lines of factory booths, the exhibitor tables will be in the right-hand portion of the show hall and most of the factory booths will be in the left-hand portion. There will be no lines of factory booths dissecting the rows of tables. As in the past, there also will be factory booths along the walls of the entire hall. According to one exhibitor, the change should make it so show patrons are not so overwhelmed by the visual challenge of negotiating the large number of exhibitor tables and booths.

As a consequence of the changes, the booths have been renumbered from last year.

Looking from right to left, exhibitors’ tables will be divided in the usual fashion: Antique, American Bladesmith Society, the Knifemakers’ Guild and Handmade. The collector displays will continue to be in the right-hand back portion of the show hall. The Stage and Demo Areas will be in the back center of the hall. The Knife-Of-The-Year® Display will be in the middle of the floor starting where the booths are.

For the latest knives, knife news, trends and more, stay tuned to blademag.com.

2017 BLADE Show Knife Makes The Cut

stationery cut
The 2017 BLADE Show Knife and its 1.4116 stainless steel blade cut stationery with ease after whittling curlicues. It was very sharp out of the box.
push lever up
To begin disassembly of the 2017 BLADE Show Knife, push the lever on the bolster up.
sensation of disassembly
The sensation of holding a knife that’s coming apart in your hand is kind of cool.
three part disassembly
The 2017 BLADE Show Knife separates into three parts: two handle halves and the blade. Keep it super simple, you might say.
wheel and linerlock spring
Partially reassembled you can see the liner lock spring and wheel in the handle butt.
separate the handle
Rotate the wheel in the handle butt clockwise until the handle separates.

It’s the Official 2017 BLADE Show Knife by CRKT and I couldn’t wait to see what makes this puppy go.

 

curlicue cutting
The EDP coated blade pulled curlicues with no problem.

Designed by BLADE Magazine Cutlery Hall-Of-Fame© member Ken Onion, the Homefront Tactical features a 3.427-inch blade of 1.4116 stainless steel with an EDP coating and a combo edge. The flipper folder secures via a linerlock and the handle is a textured glass-reinforced nylon with a blade-tip-up pocket clip. Weight: 4.3 ounces. Closed length: 4.684 inches.

The centerpiece of the 2017 BLADE Show Knife, however, is Onion’s “Field Strip” technology, which enables you to easily disassemble the knife for cleaning and reassemble it in a matter of seconds without the need of a takedown tool of any kind.

Sounds easy but what about people with 10 thumbs like me? I pulled out the 2017 BLADE Show Knife and opened and closed it a few times. The flipper opener works well. I tried whittling some curlicues from a board and cutting stationery, both with good success. The blade was very sharp out of the box.

The directions for the “Field Strip” feature are pretty straightforward. With the knife in the closed position, push the lever on the bolster up. No problem. Rotate the wheel on the handle butt clockwise until the handle separates. The wheel is notched with gears. I found it turned well either with one of my 10 thumbs or my “second thumb” that passes for an index finger. The handle separates into three pieces—two handles and the blade—all simple to clean when the time comes.

To reassemble, put the three pieces back together, press down on and hold the pivot, rotate the wheel counter-clockwise until snug, and push the pivot lever down. It’s pretty easy, even for me.

BLADE Show knife
The CRKT Homefront Tactical is the Official 2017 BLADE Show Knife.

A couple of things: If, after reassembly, the pivot lever balks any when you try and push it down, tweak the screw on the reverse side of the pivot pin until the lever cooperates. Also, be sure the white washers on the pivot pin stay put when you have the knife apart. If they were to come off for any reason during cleaning and/or reassembly, they could be difficult to find. You may even want to remove them during cleaning and apply a small dab of oil to keep them lubricated.

All in all, the Homefront Tactical is a cool knife—and the fact that it’s the Official 2017 BLADE Show Knife makes it even cooler. It features the BLADE Show 2017 logo on the blade and is limited to a run of 300.

blade tip up pocket clip
The pocket clip allows for blade-tip-up carry.

To get yours, visit bladeshop or attend the 36th Annual BLADE Show June 2-4 at the Cobb Galleria Centre in Atlanta.

 

Knives Will Rule 36th Annual BLADE Show

36th Annual BLADE Show
36th Annual BLADE Show preview highlights the latest issue of BLADE®.

Sneak a peak at next week’s 36th Annual BLADE Show in all its sharpened glory in the latest issue of BLADE® Magazine, on newsstands now!

June 2-4 at the Cobb Galleria Centre in Atlanta, the world’s largest and most important knife show will feature over 1,000 domestic and international exhibitors of custom and factory knives and the people and companies who make them, thousands of worldwide knife fans and much more—and it’s all in the latest BLADE.

The hottest in factory debut knives, the world’s best knifemakers pitting their knives against one another in the show’s custom knife judging competition, the inductions of Jim Batson and Les de Asis into the BLADE Magazine Cutlery Hall Of Fame©, the selection of the BLADE Magazine Knife-Of-The-Year® Awards, extensive knife and knifemaking instruction in the 4th Annual BLADE University, the BLADE Show World Championship Cutting Competitions for both men and women conducted by BladeSports International, demos of knife grinding, knife throwing, Japanese sword cutting—all are but the tip of the iceberg of the 36th Annual BLADE Show.

New features include a balisong-flipping competition conducted by Blade HQ, a survival skills demo by one of the stars of the Alone™ TV series on HISTORY®, Larry Roberts, the BLADE Show 2017 Photo Contest in which patrons enter their favorite BLADE Show 2017 photos with a prize going to the one selected the best of the bunch, how to make a Brut de Forge knife—these and more are among the highlights of the 36th Annual BLADE Show outlined in the latest BLADE.

Also this issue: a retrospective of a knife that changed knife history in “Rambo Revisited”; part one of a three-part series on the latest sharpeners in “The Hone Zone”; how to make a Viking camp knife; New Zealander Jared Wihongi’s new Maori-inspired combat knives for Browning; a review of the handforged knives that will be auctioned—including this issue’s cover knife, a stunning damascus D-guard bowie by Veronique Laurent—by the American Bladesmith Society at the BLADE Show in “John White Will Be Watching”; and much more, all in the latest BLADE.

2014 BLADE Show Knives Available NOW!

0

CRKT swindleAnd are they ever sweet! The new, official BLADE Show 2014 knives, limited editions of each with the show logo etched on the blades, are sweet! Designed by Ken Onion, the CRKT Swindle possesses functional, curved construction that flows “from tip to tail.” Designed by Glenn Klecker, the CRKT Nirk Tighe 2 touts a mesmerizing skeletonized handle and a functional design.

Retailing for $79.99, the BLADE Show offers this limited edition Swindle for only $50! It also showcases a smooth IKBS (Ikorma Korth Bearing System) pivot, allowing the hollow-ground, modified wharncliffe blade to move with ease, while the frame lock mechanics and flipper-style opener are neatly tucked into the grooved and groovy handle. Click here for much more on this spectacular knife!

CRKT nirk tigheRetailing for $130, the limited edition Nirk Tighe 2 is an integral lockback folder with strong blade lock-up that only gets stronger as you grip the handle tighter. A drop-point blade with recurved edge offers a nice touch as it flows from the handle shape. Learn much more about the Nirk Tighe 2 here!

FOX News Analyst S.E. Cupp Headlines BLADE Show Knife Rights Breakfast

S.E. Cupp (right) shows Ken Onion (left) her knife-throwing form during a recent hunt in Alaska.

 

Meet and hear noted conservative political commentator, author, columnist and knife user, S.E. Cupp at the Knife Rights awards breakfast during the BLADE Show (www.bladeshow.com). Her frequent appearances on Fox News and GBTV or her columns that are originally published in the New York Daily News are noted for insightful views about topical issues of the day.

    Cupp’s talk is titled, “Leave My Knives Alone! A New York Girl’s Reflections on Life, Liberty and the Lunacy of Anti-knife Laws.”  

    As Cupp notes, “a knife is more than just a utility tool. In a pinch, it can also serve as a defensive weapon, clearly protected by the Second Amendment…Whether in town or on a hunt, a knife earns its place at my side as an essential tool. I am a knife user and proud to be one. Leave my knives alone! ”

    For more info click www.KnifeRights.org.

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement