The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Boy With Form of Autism Killed After Threatening Police With Knife

Police in Calumet City were defending their actions Wednesday after officers shot and killed a 15-year-old boy, who has a form of autism, after he threatened them with a knife.

     Stephon Watts’ family said he suffered from Asperger’s Syndrome — a high-functioning form of autism — and attention deficit disorder.

     According to the story at http://chicago.cbslocal.com/2012/02/01/boy-15-shot-dead-by-police-in-calumet-city/, some witnesses claimed the boy was only holding a butter knife. Police would only describe it as a “kitchen knife.”

     Calumet City Police Chief Edward Gilmore said the boy cut a police officer through his shirt sleeve with a “kitchen knife.”

     “I think they did everything they possibly could to avoid this,” Gilmore said. “It’s unfortunate that we had to get to this situation.”

     The boy’s mother, Danelene Powell-Watts, was screaming, livid, and inconsolable after her son was killed. She was furious that officers used deadly force against her son this time rather than subduing him with a stun gun.

     “They shot my son,” she yelled at officers as she was blocked from entering the Calumet City police station. “Every last one of you know my son has autism.”

     Gilmore said police had been called to the home 10 times since 2010 to deal with the boy. Stephon’s father reportedly called police again Wednesday morning after the teen had become aggressive.

    “We tried to do everything we could to keep him from being a victim, as he was an offender. He chose to be an offender,” Gilmore said.

    The chief said police were called to the home to get Stephon under control, as they had been before. But that didn’t work, he said.

    “When he slashed the officer’s arm, the officer felt his life was in jeopardy and he had nothing else to do, but to defend himself,” Gilmore said.

     Stephon’s family said police have used a stun gun on him in the past.

    “They didn’t have to murder him. This is nothing but murder and they shoot to kill,” Powell-Watts said. “He had a butter knife and … my husband said that he lunged at the police officer.”

     Stephon’s uncle said police had subdued his nephew with stun guns before.

     “They didn’t have to shoot him. They could have tasered the child. He’s only 15 years old,” Wayne Watts said. “They could have tased him, like they did him before, took him to the hospital and he would have been fine and that’s what I want to know. Why couldn’t they do that to him so that he could still be breathing with us right now?”

     Gilmore said a stun gun wasn’t used because the lead officer did not have a stun gun.

     Five officers responded to the Watts home after Stephon’s father called police, according to Gilmore. Two entered the house, heading to the basement where they found Stephon. One of those two officers did have a stun gun with him.

     “Unfortunately today, when he slashed the officer’s arm, the officer felt his life was in jeopardy and he had nothing else to do, but defend himself,” Gilmore said.

     The boy’s family said police should have used a stun gun and spared his life, especially since they’d been to the home before and knew what to expect.

     Both officers have been placed on paid administrative leave.

     Gilmore said a year ago, all of the officers in the department went through a three-day autism awareness program to learn how to handle calls involving people with autism.

     Dr. Louis Kraus, professor and section chief of child and adolescent psychiatry at Rush University Medical Center, questioned whether deadly force was really necessary.

     “With everything that they’ve done before, they should have known before going in what they were dealing with. And, you know, the goal really should have been to have gotten this child to a hospital,” Kraus said.

     He said people with autism can frequently become aggressive, but not because they are trying to hurt someone.

     “What we know is that, when they get anxious – probably more commonly than the typical person when they get anxious – they might lash out; not with the intention of doing harm, but simply because of how frightened they are,” Kraus said.

     Calumet City Alderman Brian Wilson had questions about the shooting as well. “I think less deadly means could have been used,” Wilson said.

     Meanwhile, Illinois State Police are investigating the shooting.

For more on the latest knives, knife news, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb020612BL1SU

KA-BAR Launches Military Appreciation Program

KA-BAR Knives created a Military Appreciation Program to give thanks to the heroes of the U.S. Armed Forces, and will give one KA-BAR Fighting/Utility knife to an active-duty service member each month. To be considered for the drawing, military personnel should send an email to [email protected] from a .mil email address. The email should include a name, shipping address and a brief summary of how the knife will be used. Shipping addresses must be stateside.

Winners will be selected at random the last Friday of each month. The first drawing will be held September 28th. Good luck!

Colorado Dreamin’: Western Cutlery

A rare Twin Set of Western Cutlery knives consists of a red-handle P48A (top) and P28 (bottom). The P28 has a sabre-ground blade instead of the standard flat grind. (Clyncke photo)

Knife collectors are dreamers. They dream of finding a Scagel, a fine bowie or an old Case knife at garage and estate sales. They dream of looking through a box of junk at a flea market, spotting an old green-bone Remington whittler, and buying it for five bucks so they can walk around smiling like a Cheshire cat. Most of the time it is just a dream, though once in a while the dream comes true.

    My dad worked at Western Cutlery in Boulder, Colorado, in the late 1930s, and I did concrete contract work for the company after it moved to the outskirts of Boulder on Western Avenue. Dad was good friends with the Harvey Platts family, and I got to know a number of the workers at the plant. I became a part-time custom knifemaker, scrimshander and jewelry maker over the years, and when Western’s plant in Longmont went out of business, I bought a lot of raw material I could use to make my knives and jewelry.

    I never lost my love of Western knives. I have owned a lot of the Boulder models and always enjoy looking for them, finding a good one, removing the dirt from it and cleaning up the sheath. My family had many Western knives on our ranch and farm, where knives were everyday tools. The many different ways of using them resulted in most being heavily abused, overly sharpened on a grindstone, and tossed in a bucket in the old shop when they wore out. I still have some of the old knives with blades that were sharpened so much they resemble toothpicks.

    I am retired now and go to many estate sales and flea markets, hoping for a good find here and there. I always see my collecting friends looking for “the prize,” too. We have a friendly competition to see who can get that old knife first, then hunt the others up and show what we found.

 

DREAMIN’-TYPE KNIVES

In 2010, a family friend who was 89 passed away and I bought some nice old knives from his family, including five Westerns, a nice old Case Tested XX and several other brands. A couple of the Westerns and the Case are in very good condition—dreamin’-type knives.

    A week later I was at another sale and asked about any Western knives, as another long-time Boulder family was conducting the sale. I was about to leave when a man said he had heard me ask about Westerns. He had one, I looked at it and we exchanged phone numbers. On the way home I started dreaming again about what the man had, hoping it was a rare one, maybe a World War II stiletto or a big, old one-blade folder.

    A few days later I got anxious and phoned him. He said the knives were packed away and he would call me when he found them. I had heard that many times before, so the dreamin’ abruptly stopped.

    Two days later the phone rang and it was the fellow again, telling me to stop by. I arrived and he got out three boxes and put them on a table. Inside were many cloths of different types rolled up in bundles. I picked up the top one, opened it and saw a Western 48A with red handles in mint condition. I nervously started opening more. Not one or two as I had imagined, but 28 pristine Western Boulder knives with sheaths! I was stunned to say the least. This was without a doubt the finest group of knives I had seen since Western closed its doors.

    There were six folders, including a gorgeous 062 two-blade with redbone handles, two yellow-handle trappers, a 441 with cracked-ice scales, a brownbone 426 stockman, and a 656 with beautiful redbone scales. There was an L77A with a sawtooth back, a 539 with very nice stag handles, a rare dark-yellow-handle P48A, four “Black Beauty” knives of varying sizes, an L28, 628 and a P28. As I kept unwrapping I became more stunned at each knife. These all were brand new, never used or handled at all. Luckily, they were not stored in the sheaths but wrapped separate from the corroding leather.

    As I lifted one of the last four and unwrapped it, I know my jaw dropped to my chest. Here was a wonderful white-handle “Twin Set” containing a P48A and a P28. I was nervous as a cat in a dog pound! As I unwrapped the last three, again I was stunned. Here were three more Twin Sets, one stacked leather, one white handled and another red. I calmly put them all back as the man inquired which one I would like to buy. I asked which ones were for sale and he said, “Why don’t you buy ’em all?” We arrived at a price and I paid him.

    I asked where the knives came from and he said they belonged to his brother, who had worked at Western for a while in the leather department. He did not seem to want to talk about it, so I took the knives and left.

 

DREAM, DREAM, DREAM …

When I got home, I carefully unwrapped the knives and sheaths again, lined them up and just stared. One of my dreams had come true for sure.

    It was time to give the knives closer inspection. Most of the brass guards and nickel bolsters were discolored with age, so I took a polishing cloth and carefully brought the new shine back. As I began to polish the stacked leather Twin Set, I got another shock.

    Both knives had a Boy Scout stamp just above the Western Boulder stamp. I had seen 48s with the Boy Scout stamp but never the smaller L48B. Also unusual is that three of the four Twin Set larger knives have sabre blades with no blood grooves. The sheaths were somewhat dry, so I applied leather balm to bring them back to life. I noticed some were not stamped the same as Western did most of its sheaths, particularly the four Twin Sets. Since the knives’ original owner had worked in Western’s leather shop, he may have been just doing what he liked, or he may have been trying new styles. I guess I will never know for sure.

    One thing I do know for sure: I will keep dreaming of finding another great knife or two, and now I can dream of finding another great cache such as this one.—by Marvin Clyncke

 

DREAM KNIFE VALUES*

 

Twin Set w/scout-stamped knives $400

Twin Set w/red tenite handles   $450

P48A w/yellow handle $375

539 w/stag handle $275

248 w/cracked-ice handle $200

060 Rancher’s two-blade folder $250

L77A w/Finnish-style sheath $250

Twin Set w/white tenite handles $450

 

*The author’s values are for knives in mint condition.

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb073112 for more information.

Alaska Pro-Knife Bill Vote Today—Contact Now!

According to Knife Rights, the Alaska House will vote today on House Bill 33 which, if passed, would ensure one-hand and assisted-opening knives are not considered gravity or switchblade knives. If you live, work or travel in Alaska, please contact your representative(s) and ask them to vote in support of HB33.

Yesterday, Knife Rights Director of Legislative Affairs Todd Rathner testified at a hearing of the Alaska House Judiciary Committee on HB33 “Definitions of Gravity Knives and Switchblades,” referred to by primary sponsor Rep. Mark Neuman as the “Knife Rights Bill.”  The bill also includes Knife Rights’ requested Knife Law Preemption. HB33 advanced out of committee without dissent and now goes to the full House for a vote.

House Speaker Mike Chenault and Rep. Max Gruenberg co-sponsored HB33. The bill is nearly identical  to last year’s HB55, which was passed by the House but was not heard in the Senate. “With changes to the Senate after the 2012 election, we are anticipating better luck in affecting change in Alaska’s knife laws this time around,” Knife Rights reported.

Preemption ensures citizens can expect consistent enforcement of knife laws everywhere in a state. Preemption prevents the creation of or eliminates a patchwork of local ordinances and laws more restrictive than state law, which serves to confuse or entrap those traveling within or through the state.

When contacting the representative, all that is necessary is to simply ask him/her to vote in favor of HB33. Keep it short and to the point.

For more information visit www.kniferights.org.

We’re Re-Designing Knife Showcase

We’re re-designing Knife Showcase, so please bear with us as changes are made.

 

Thanks!

 

-Ben

Inspired By William Scagel? These Knives Were

Inspired by pieces designed and made by BLADE Magazine Cutlery Hall-of-Fame® member Bill Scagel, the grandfather of the custom knife industry, the Scagel Knives brand includes a line of production/factory knives in the style of Scagel. This superior style of knife design can be seen in this fantastic Sambar Stag Hunter.

The specifications of this outstanding knife:

  • Overall Length: 10.125″
  • Blade Length: 5.5 Inches
  • Blade Steel: A-2 @ 58rc
  • Blade Thickness: .217 Inch
  • Weight: 7.5 oz
  • Convex Ground

To get your Scagel-style hunter, go to: http://www.shopblade.com/scagel-knives-hunter-sambar-stag-u1216?lid=bljkbl060612

Others in the line include a Scagel Knives “Medium Bowie” and “Medium Hunter – O Style.”

The Ford of Knife Grinders?

Burr King 960-272
Knifemaker Lucas Burnley shows students how it’s done on a Burr King 960-272 belt grinder under the Burr King-sponsored tent during the 3rd Annual BLADE University at this year’s BLADE Show.

When it comes to the go-to machine for knifemakers, the Burr King 960-272 2×72 may be the Ford of knife grinders.

“The 960-272 has been in production for 40 years. It’s a knifemaker’s grinder. It started with Bob Loveless,” noted Burr King’s James Krier during the grinding classes conducted by Tom Krein and Lucas Burnley in the 3rd Annual BLADE University at the 2016 BLADE Show. “It’s kind of interesting to have a machine over 20 years old that you can still get parts for.” Add the fact that Burr King is celebrating its 65th anniversary this year and you have a source for parts that’s been here for the long haul. “The knifemaker doesn’t have to worry about the company who made it [Burr King in this instance] going out of business,” Krier added.

In sales and marketing for Burr King for 10 years now, Krier said a number of companies that make grinders have passed by the boards in recent years. Not so with Burr King.

“I was talking to a guy about how many grinding companies there had been in the past 20 years and he was saying there were about 25 he could think of that are just out of business, that were up for about two years and then were gone,” Krier said. “That’s why pros who do it for a living will buy something they can actually get parts for 20 years later. It’s gonna be there when they need it.”

The 960-272 is cast aluminum construction. “Every machine is going to be the same. It’s not like it’s a fabricated design or this machine is different from that machine,” Krier continued. “If someone buys a machine and they have one that’s 10 years old and buy another one today, the parts are interchangeable. It’s like having a Ford you can get parts for.” Like old Fords, it’s tough as nails, too. “That’s thing’s bulletproof and ready to go,” Krier assessed.

Burr King makes about 15 different belt grinders, including those for factory knife companies, but the 960-272 remains the bell cow of the lot.


Learn How to Grind Knives

Knifemaking guide to grinding blade edgesThe BLADE staff put together this guide to grinding knives as a way to help new knifemakers jump into these essential skills. Download it now and start reading right away.

Save

Save

Save

Save

Save

Save

Save

Save

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement