Short, long, thick, thin—and we’re not talking about the wide variety of knives at BLADE Show. No, we’re talking about facial hair that made men nod and women blush. The beards of BLADE Show impressed all! This collection is only a small representation of what we saw at the show. We don’t care about the ebbs and flows of fashion or laboratory tests on what’s found in beards, which frankly only tell us that bearded men live life to the full extent of their whiskers! Here at BLADE, we only hope the tradition continues.
The beards of BLADE Show impressed all. This example of a full beard is combined with longer hair for a decidedly not-hipster, backwoodsy look.Another Bandholz, only this one with shorter hair, could be seen at the Chris Reeve Knives booth. We also liked the hat adornment. We guess BLADE Show had something to do with knives, but back to beards…Lou Goodman of Abraham & Moses Survival Equipment sports a neat Van Dyke, which is any mustache-beard combo but with cheeks clean-shaven.We liked the gradations of red in this full beard on Larry Roberts, “Alone” Season 2’s runner-up.Ever see a Lynyrd Skynyrd concert? We found this full beard-long hair combination, if we remember correctly, at Zombie Tools.These old-school gentlemen at Al Mar offered two styles of white whiskers and we loved them both!At Rustick Knives we found the warrior tradition expressed in a samurai-esk ponytail and full beard on the owner of Harp Leather.Dave Wenger, owner of Wenger Blades in Hudsonville, Michigan, rolled with a Hollywoodian, which from what we can figure is a trailback that meets up with sideburns. Who cares what they call it; we like it!Dan “Jake” Jaquay of KME Sharpeners chilled out on Sunday at BLADE Show with his flame-red chin tresses.Our photographer went back more than once to try to capture the wildness at White River Knife and Tool, but could never seem to catch Matt C. and Alan N. at the same time. Fortunately, they caught wind of our mission and sent this along. Double-YES!Officially a Van Dyke, the goatee on this show attendee is going as far as it wants.Eli Gautreaux of Jerry Hossom Knives checked out the Knife of the Year Award entries in the lobby.A show-goer seems to be having a good time while we admire his Hollywoodian done to full length.We found that bearded men tended to have bearded friends, so we often got twofers!A barback at Key Bar caresses the whiskers.These two show-goers worked the man buns, ear stretcher and shades.As much as we tried to capture bearded men unaware, they often knew they were being watched.This lucky winner at the Ernest Emerson Custom Knives Lottery almost looks like he is starting a French fork-style of beard. Ernie looked as debonaire as always.Ken Hunt of Attleboro Knives in Idaho sports a salt and pepper Van Dyke.Another lucky winner at the Emerson Knives Lottery, Sevag Tankian, rocks a distinctive full beard.Stephan Fowler of Fowler Blades paired his full beard with a tactikilt one day, but, well, that’s a story for another BLADE Show.This luxurious white Van Dyke was worn well by a gentleman attending the Emerson Custom Knives Lottery on Saturday.We always enjoy talking with new knifemakers…oh, and look, a beard. We hope to see this knifemaker back again next year, along with many others. Like and Follow “Erin at BLADE” on Facebook for guidance on how to get your knife into BLADE Magazine.A righteous beard! If a knife doesn’t catch your eye at BLADE Show, we’re thinking a beard or two might.Be sure to plan for BLADE Show 2018 starting now. You know there will be plenty of knives, and if there’s ever an exhibition of beards, this is the place!
This three-book set will be referred to repeatedly by those both new and established in the knifemaking craft.
Did BLADE Show 2017 get you pumped for knifemaking? This two-paperback, one-e-book set will answer question for those new to the art, while also reaffirming or acting as a review for those more established in their craft. Included are: “How To Make Knives,” “The Wonder of Knifemaking” and “Wayne Goddard’s $50 Knife Shop, Revised.” Normally this trio would cost you $99.97, but you can get it now for $34.99.
Living Knife by Jean-Marc Laroche highlights new issue of BLADE, on many newsstands today!
The Living Knife by Jean-Marc Laroche will literally grab you from the cover of the new BLADE®, on most newsstands today.
Featuring a damascus blade forged by Sweden’s Roger Bergh, the Living Knife includes a mechanical “hand” for a handle, the fingers of which will grasp your hand in return when you grip it! Find out more about this ingenious creation by Laroche, a French knifemaker and sculptor well known for his otherworldly approach to knives.
Speaking of out of this world, ABS master smith Lin Rhea visited Steve Arnold, one of the stars of the Discovery Channel’s “Meteorite Men” TV show, and obtained some meteorite material from Arnold for use in the damascus blade of a special bowie. Get the complete story on the meteorite material and its origin, how Lin made the knife and much more in this issue.
Speaking of damascus, it is one of the most fascinating materials for knife blades, among both knife neophytes and aficionados alike. How did this storied material first come about? How many different versions have there been? Get the inside scoop on this ancient material in the new BLADE.
The American Bladesmith Society traces its creation to the man who reintroduced damascus to the modern custom knife movement—Bill Moran. One of if not the largest organizations of knifemakers in the world, the ABS presented its annual best knife and bladesmith honors at the 2014 BLADE Show. See what those top knives and who those premier smiths are this issue.
Hunting season is in full swing and hunting knives are in hot demand. But is just one enough? Find out why two hunting knives are better than one in the new BLADE.
There’s much more, including a test of two automatics, the latest ceramic kitchen knives, a Nordic knife for every budget, the sharpest Christmas gifts anywhere, how Dan Keffeler won the BLADE Show World Championship Cutting Competition and much more in the January BLADE, on newsstands NOW!
John H. Davis’ knives, from top: oosic/ivory bowie, twist damascus of 1084/15n20, copper guard, spacers and butt, 13 inches overall; India stag bowie, ladder-pattern damascus, copper guard, spacers and butt; India stag and buckeye burl drop point, 1084/A203E damascus, nickel-silver fittings; mammoth ivory boot dagger, 1084/15n20 damascus, nickel-silver fittings; and a mammoth tooth ivory and snakewood locking-liner folder, 1095/nickel damascus. Davis’ sheaths, from top: the first two are belt-loop pouch types in custom leather with python inlay; a pouch type in custom leather with cobra skin; and a belt-loop-and-snap pouch model in custom leather with snakeskin inlay. The maker’s list prices for similar outfits, from top (the prices include sheaths where applicable): $500, $400, $350, $350 and $350. (Point Seven photo)
John H. Davis offers nice knife-and-sheath combinations—and don’t forget the folder!
Some makers do not offer sheaths with their fixed blades. ABS apprentice smith John H. Davis is not among them.
His selection of damascus fixed blades includes handsome sheaths, including one in a cobra-skin inlay he said “a couple of guys do back flips over.” Other sheaths have python and snakeskin inlays. A computer field engineer by day, Davis also has a background in metal fabrication, which helps explain the copper he uses for guards on some of his models. “I’m one of the few who uses it for guards,” he noted. “I love working with it. It’s an underrated material.”
In terms of offering the total package of knife and sheath, underrated also would seem an appropriate way to describe Davis.
For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb022612#BL1SU
GiantMouse is pushing the boundaries of two renowned Danish designers, but together with an American businessman are building a better collaboration model.
By now knife industry followers know that renowned Danish knife designers Jesper Voxnaes and Jens Anso teamed up to create GiantMouse LLC. What you might not know is that a California businessman with a love of knives became the organizational drive behind the endeavor. Jim Wirth asked a simple question over beers with Voxnaes and Anso that solidified the venture, and bettered the collaboration model creatively and financially.
When Wirth turned 14, his older brother Chris gave him a small Gerber pocketknife with mother-of-pearl scales as a birthday present. He loved looking at that work of art, and yet, the knife got plenty of use too. From then on, Wirth began attending knife shows, like the former Bay Area Knife Collectors Association show in Santa Clara. He joined that organization so he could attend the meetings and learn more about the knife industry.
His love of knives—and watches—grew and he continued to attend shows, adding the New York Custom Knife Show and BLADE Show. Meanwhile, he developed a data warehouse-business intelligence firm that became an Inc. 500 Fastest-Growing Company. After a merger, Hewlett-Packard bought the company, and Wirth was set as far as his family and living expenses were concerned. He began consulting, advising owners of young businesses and angel-investing, or backing business that show promise.
Jim Wirth, left, a businessman and angel investor, suggested that Danish designers Jesper Voxnaes, middle, and Jens Anso, right, start a new company to produce knives they collaborate on, sharing in profits rather than receiving a royalty percentage.
Wirth had always been a fan of the work of Voxnaes and Anso, so at a BLADE Show, although he’d met them before as a customer, he was more formally introduced to the men through a common friend. Over drinks, Wirth inquired about the royalties each knifemaker was making in their partnerships with well-known manufacturers. Although mum on details, designer royalties on any manufacturing collaboration range from 3 to 7 percent, sometimes as high as 10, of net sales. There are countless variables that determine the final cut, however, according to numerous sources in the knife and product development industries, 5 percent is thought to be fair for both the designer and the factory that takes the risk on whether the product will be a success or not.
Voxnaes and Anso revealed that they had indeed co-designed some knives together. They had even come up with a potential company name, GiantMouse, because Denmark is a tiny country in a giant world and they wanted GiantMouse to be a small knife brand in a giant knife industry. Wirth asked why they hadn’t produced these knives they’d worked on. And with that question, GiantMouse came into being.
The P in the GMP2 version stands for pirate and if you look closely, the mouse logo is wearing an eyepatch.
The three men determined that they would only do limited runs of folders four times a year, 300 in a standard finish and 100 in a special finish. These 100 “pirate” versions would include the GiantMouse logo with a patch over its eye. The GM2—GM for GiantMouse and 2 for sequential order—for example, is a full-size everyday carry folding bowie with carbon fiber handle scales. The backspacer, clip and pivot ring are a rich blue anodized titanium. The nested lockbar is also titanium. The 3.3-inch blade is made of Bohler M390 Microclean powder corrosion-resistant martensitic stainless steel with a satin finish and is ground to a 0.157-inch thickness. The handle length is 4.62 inches, and the knife weighs 4 ounces.
The GiantMouse team knew they always wanted to have some knives available for sale, so they do not limit sales of their fixed knives like the GMF2.
Although the folders are discontinued as soon as the 400 pieces sell out, the GiantMouse fixed-blade runs are unlimited. The GMF2—F for fixed—for example, with leather sheath, is a throwback to a Nordic work blade that can be used for everything from bushcrafting to everyday tasks. The 3.62-inch blade is made of Bohler N690 cobalt high-performance powder steel, ground to a 0.157-inch thickness and finished in a fine stonewash. The 4.43-inch Micarta handle brings the overall length to 8.12 inches. The knife weighs 4.1 ounces.
The way the designers look at it, according to Anso, is that by working very closely and combining their skills, each designer is forced out of his individual comfort zone. Integrating each maker’s ideas and style without compromising on design quality is “a difficult task but makes for a very strong design if done right.” It’s important to each man that the other is able to vouch for everything involved in the design. Both must be happy with the final result of each knife.
Anso and Voxnaes both started making knives in 1989, and they both lived in rural northern Jutland, only about 30 miles apart. They didn’t actually meet until 2005 at a small knife show. They instantly hit it off and have been close friends and colleagues ever since, explained Anso.
The two friends met Wirth at a BLADE Show when Wirth was collecting knives. “With Jim’s well-known talent for business, high ethics and passion for quality, combined with our skills and experience in the knife business, the idea of GiantMouse Knives started to take form,” Anso stated.
As chief executive officer, Wirth drew up the articles of incorporation and launched the website. He also set up the fulfillment center in Southern California. The knives are manufactured in Maniago, Italy, and Voxnaes and Anso handle all interactions with the manufacturer from approving prototypes, through test runs, to quality control of the finished knives. A final inspection is performed when the knives arrive in California. Out of a run of 400, perhaps a half-dozen will be returned because the blade is slightly off center or a flipper action isn’t as smooth as it should be. The knives are then sent to the fulfillment center where they are put in branded packaging and sent to customers.
One might figure that short runs of well-designed knives would be unaffordable because you don’t have a high number of pieces over which to spread the start-up costs. There can also be fees if runs don’t meet a minimum quantity. But the founding trio at GiantMouse committed themselves to this route because it incentivized the designers. “They’re challenged to create more designs. It’s exciting,” Wirth said. And as partners in the company, the designers share in the profits with Wirth. This both pushes the designers and rewards them for their efforts perhaps more than a percent-of-net-sales royalty would.
All along the goal has been to create exceptional knife designs, produce them at the highest quality possible and keep them affordable. For example, the maker’s list price for the GM2, in standard finish, is $325; the GMP2—the P standing for pirate—in special finish, is $375. Ten dollars from the sale of every folder, and currently $20 from every fixed blade, is donated to Save The Children. (The organization helps ensure children at home and abroad receive the heath care, nutrition, education and protection they need to grow up happy and secure.)
Wirth said that he got to go to Demark and see the operations of both designers. Then the trio drove to a knife show. “I sat in the back and listened to Jens and Jesper talking in Danish. Every once in a while, I’d hear ‘Jim,’ and I’d be like, ‘heeey.’ The only Danish I learned was something written on the radio, something like ‘the radio isn’t on.’ Now that’s what I say to them when I see them.” Wirth laughed telling the story. He seemed happy, like you might imagine a 14-year-old boy would be over receiving a beautifully designed knife.
Know What Great Knife Design Is
“101 Knife Designs”will give you both theory and beauty behind the great knife designs.
Understanding what makes a great design makes you a better collector and a better maker. “101 Knife Designs” by Murray Carter will not only inspire your work with detailed discussion of blade design, but will give you full-color images of exquisitely designed knives to ogle. At $19.53 you save $10.43 off the cover price.
Kirby Lambert’s straight razor graces the cover of the latest BLADE®, on newsstands NOW!
Stubble is in trouble thanks to the hottest straight razors—one of which, the newest model by Kirby Lambert, is the cover piece for the latest BLADE®, on newsstands NOW!
Known for his custom tactical folders, Lambert is one of several makers who offer custom razors, the others highlighted in the story on page 12 being Sal Manaro, Rick Barrett, Wally Hayes, Neels van den Berg and Bill Ellis. There’s also a factory version from Boker that made the cut. Speaking of Hayes, he wrote a story outlining his approach to making straight razors on page 20.
Is a tactical knife a fixed blade or a folder? The answer depends a lot on who you ask. While knife-o-philes continue to ply the age-old question, we provide nine of the best factory buys in the genre—both folding and fixed—on page 28.
Knife kits have some a long way from the days when they consisted of a blade blank, a couple of handle slabs and several screws. Now they offer folders in a number of configurations, including one for a butterfly knife. Check out the latest versions on page 40.
You’ve already read on blademag.com about the first-ever knife show that will combine members of both the Knifemakers’ Guild and the American Bladesmith Society set for Sept. 18-20 in Kansas City. However, BLADE gets more of the inside info—including the fact that the old Muehlebach Hotel, site where Cutlery Hall-Of-Famer Bill Moran reintroduced damascus at the 1973 Guild Show, is in one of the wings of the new venue—for you on page 46.
Spyderco long has been a world leader in factory knives and it continues that role with its Ethnic Series of knives that include designs by such international makers as Pekka Tuominen, the late Eduard Bradichansky and Gabor Szakonyi, as well as accomplished American maker Ed Schempp. Go global with the Spydie guys on page 50.
There’s something about a super-thin custom folder that bespeaks of elegance. And some are so thin and delicate you’d think they might not be able to do their cutting jobs—though such is not the case. Check out some of the leanest of the keen by Richard Rogers, Cliff Parker, Bill Ruple, Scott Sawby and Ken Erickson on page 74.
There’s much more, including Ed Fowler’s “12 Keys to Great Knife Promotion”; a look back at the many contributions of the late, great Cutlery Hall-Of-Famer, Kit Carson; a test of two big fixed blades in MSG Kim Breed’s “Spec Sheet”; E.C. Loerchner’s masterful “Autumn Knife”; and much more, all in the latest issue of BLADE.
The Denver Custom Knife Show will include the custom knives of such makers as Jerry McClure, author of “Wild Thing.” (SharpByCoop.com photo)
The 21st Annual Denver Custom Knife Show will feature some of the world’s finest custom knives, knifemakers, custom knife purveyors and knifemaking supply companies this Friday through Sunday, Aug. 16-18, at the Crowne Plaza-DIA in Denver, Colorado.
Bring in the flyer from page 25 of the October BLADE® (www.blademag.com) or page 11 of the November BLADE and receive $2 off on the admission price.
Sponsored by the Professional Knifemakers Association (PKA), the show will include custom folding, hunting, fishing, tactical, kitchen and art knives. Demonstrations will be given on forging and grinding. PKA members’ knives will be presented through a special raffle and door prizes will be given out daily.
The PKA is one of the world’s largest and most prestigious organizations of custom knifemakers, and the PKA Show is among the best knife shows in the Western USA.
Exhibiting knifemakers will include Eddie Baca, Mardi Meshejian, Wayne Hensley, Al Warren, John Bartlow, Eddie Stalcup, Mike “Whiskers” Allen, Mike Mooney, Harvey King, Mike Irie, Don Bell, Steve Rollert, Pete Truncali, Chuck Fraley, Jerry McClure, Mike Tyre, Olamic Cutlery, Fred Ott, Terry Schreiner, Mike Miller, Albert Trujillo, Craig Steketee and many more. Knifemaking supply companies will include Culpepper & Co., Lonestar Knifemaker Supplies, Pop’s Knives & Supply, Fine Turnage Ivory and others. Knife photographer Bob Glassman also will be an exhibitor.
Show hours are 12 to 6 p.m. Friday, 9 a.m. to 5 p.m. Saturday and 9 a.m. to 3 p.m. Sunday. Regular admission is $7 for Friday, Saturday and Sunday, and children under 12 are free.
The host hotel room rate is $104 per night. Be sure to mention PKA for the rate single or double. Call 303-371-9494 for reservations.
For more information contact Whiskers or Denise Allen at [email protected] or call 903-489-1026.
For the latest knives and knife news, stay tuned to www.blademag.com.
Photo courtesy of Benchmade Benchmade and H&K officially kicked off their collaboration 12 years ago with the 2004 release of the HK Pika.
Over a month ago Benchmade decision makers opted to immediately ramp down production of all Heckler & Koch (HK) knife lines, according to Benchmade Public Relations and Communications Manager Derrick Lau. Benchmade will concentrate efforts on its own brand of sports cutlery and edged tools.
The Oregon City designer and manufacturer notified knife dealers that although not official until Jan. 2, 2017, they would no longer make approximately 17 to 18 different models. Some supply remains, but is quickly dwindling. Dealers are encouraged to contact Benchmade if there are any HK knives they’d like to get before they are all gone.
The tactical design and affordability of HK knives attracted law enforcement officers. The knives include the Entourage, Patrol Axis, Ally, Turmoil, Dispatch, Plan D, Nitrous Blitz, MP5 and Epidemic families.
Benchmade designed and manufactured knives for other companies in the past, such as Harley-Davidson® and Bone Collector. Three years ago the company ended its collaboration with Lone Wolf to rededicate its efforts to Benchmade-branded knives. This is a continuation of that plan, Lau explained, adding it was a case of the company needing to “get our bearings back.”
The licensing agreement specified that Benchmade would design and manufacture the knives, and retain the use of any resulting innovations, while HK would lend its name and branding to the product. Such an arrangement can be a marketing boost for the manufacturer and provide a platform for creative innovation. Since automatics cannot be imported into the U.S., Lau explained, the German-based Heckler & Koch benefitted from the ability to get HK autos into the U.S. market through Benchmade.
“Our dealers are our most important asset,” Lau said. Dealer feedback indicated that the Benchmade brand is Benchmade’s most attractive selling point. After 30 years in the business, it was simply determined that Benchmade should refocus on its own brand.
Heckler & Koch does not have anything lined up in terms of continuing its knife brand, according to the company’s public relations spokesperson. “We’re a firearms company,” she reiterated, but “we like to offer our fans the accessories we know they want.” She added, “Benchmade did a great job of showing us there was a market for the knives.”
Benchmade would consult with HK officials on some designs they were considering, and HK would choose some for its web shop. Benchmade had the infrastructure in place for wider distribution.
In the future, Benchmade may be open to other collaborations, but for now the company is committed to growing its own line of knives. Some of the Benchmade knives in the works will have features inspired by the HK lines.
Benchmade did not issue an official press release because they wanted their dealers to know first, allow them time to ask questions, and provide any support they might need.
Steve Shackleford, BLADE® editor, contributed to this article
ShopBLADE is offering a not-to-be-missed package for “Knives” readers. You get the 2016 and 2017 paperback issues of “Knives,” a $67.98 value. Plus you get a digital download for the 2004-2015 editions, an $79.99 value. Your cost: $59.99, a savings of $87.98. Hurry!
