The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Paul Ehlers Sets Record Straight

Editor’s note: Long-time knife designer Paul Ehlers wrote the following letter to BLADE® concerning our oversight of Mr. Ehlers’ copious design contributions to the works of Paul Fox and Blade Magazine Cutlery Hall-Of-Fame© member Gil Hibben, one of which by the latter, the Alien, is reproduced above via the photography of Mike Carter. We reprint Mr. Ehlers’ letter here in its entirety.

 

      My name is Paul Ehlers. I am a knife designer; I believe you know my work. I have been a reader of BLADE® since 1983. It was that year I forged a creative alliance and friendship with Blade Magazine Cutlery Hall-Of-Fame© member Gil Hibben, and later with knifemaker Paul Fox. Our knife journeys have been both challenging and artistically rewarding, and we always have endeavored to push the envelope. Often the envelope would push back, but we never let that stop us!

      Looking back, the majority of Gil’s one-of-a-kind custom fantasy knives were of my design, from our beginnings in ’83 with our “Dragonfly” up until the present day. In fact, we have done over 50 collaborations. That is a lot of grinding! It is no wonder Gil has often said “Paul’s dreams are my nightmares!”

      The first fantasy knife I designed for Paul Fox we named the “Soulseeker.” It went on to win the coveted W.W. Cronk Award at the 1986 Knifemakers’ Guild Show. That was a great honor. Of the many knives I have designed over 25 years, it is one of our best achievements.

      But alas, my name is nowhere to be seen in “Raise A Glass To The W.W. Cronk Award” on page 78 of the April 2009 BLADE. The ’85 winners are listed as collaborators, so I am sure you will take this opportunity to correct this piece of our knife family history. I, and posterity, will be eternally grateful!

Paul W. Ehlers

P.S.: I can recall at the first shows I attended, the “Father of American Knife Photographers,” Cutlery Hall-Of-Famer Jim Weyer, would take me around to the tables and introduce me as “the next Bud Cronk.” This was 1983. The only thing was, I had never met Mr. Cronk and had not seen any  of his work until Jim published his first Knives: Points of Interest book. When I asked about Cronk, Jim said, “Don’t worry kid, you’re in good company!” I never forgot that. Of course, over time I came to know what a true genius Cronk was and is. This is one of many reasons why this award means so much to me.

To read more stories like the above, subscribe to BLADE. For more information on how to subscribe, click on http://www.shopblade.com/product/blade-magazine-one-year-subscription-us/?r+ssfb231111#BL1SU

Knife Laws of the 50 States via Bernard Levine

0

This is pretty cool. Back in 1996, BLADE compiled a list of knife laws in all 50 states. Bernard Levine kept that list current through 1997. Somehow, that list wound up here: http://www.knife-expert.com/sta-law.htm.

Check it out, it’s interesting stuff.

Bicyclist Knife Sharpener

An article on the lost art of knife sharpening in Spain rang true to this knife enthusiast, and I’m sure it will for you, too. In an article posted on BBC News Business and written by Tom Burridge of BBC News, Madrid, Burridge reports on two men, Rafael Antonio and Rafael Romero del Campo, who use motorbikes to take their knife-sharpening services to businesses in Madrid. sharp 1

The whirl of the petro-powered stone wheels can be heard in the early-morning hours. As Burridge writes, “A shrill, but tuneful whistle reverberated around the narrow streets of my neighbourhood in central Madrid. I peered from my balcony, and, in the distance, there he was. His name is Antonio, an elderly man, dressed in simple clothes, who grew up in a Spain that is far removed from the country we both live in today. And he is practicing a Spanish tradition that is slowly disappearing. Antonio is an afilador, which translates into English as a sharpener. He thinks he is one of only five left in the whole of Madrid.motor sharp

Brandishing two of my best kitchen knives, which probably hadn’t been sharpened for going on 10 years, I ran down on to a silent, sleepy, Sunday morning street.”

Click here to read the rest of the article. Click here for more quality kitchen knives. Or get your own knife sharpener.

Washington Governor Signs Pro-Knife Bill Into Law

The SOG-TAC Mini-Auto from SOG Specialty Knives & Tools is one of many knives that will benefit from the new Washington pro-knife bill. (SOG Specialty Knives & Tools photo)

Washington Gov. Chris Gregoire signed HB2347 into law Thursday, March 29, at a signing ceremony at the state capitol. This important legislation makes Washington state more friendly to knife owners and manufacturers by clarifying the definition of so-called “spring blade” knives (automatics/switchblades) so as to clearly make assisted-opening knives legal in the state.

    The clarification allows for both sale and manufacture of assisted-opening knives in Washington. HB2347 also makes it legal to manufacture automatics in the state of Washington. In addition, it would expand the existing law enforcement exemption for possession of automatics to members of the military and full-time first responders.

    Thanks to all who called and emailed throughout the process and helped to make this happen.

    Mike Vellekamp, one of the owners of Fox Knives USA, helped spearhead the effort to get the bill passed and was on hand with the governor when she signed the bill. If it were not for Vellekamp’s initiative and hard work, things would not be moving forward for knife owners and manufacturers in the state. He garnered the support of his 25th District Senator Jim Kastama and Rep. Bruce Dammeier to introduce the legislation that will benefit the state’s knife business, public safety personnel and individual knife owners.

    In testimony before the state house judiciary committee Vellekamp noted, “We need to get rid of the stigma that these are weapons and we need to start calling them tools because that’s what they are. The push for this bill is so that we can ensure the local law enforcement branches, our military and our firefighters get to use these valuable tools because when they get trapped, they need to get out. They need a tool at the ready that’s going to be there without needing another hand to open it.”

    American Knife & Tool Institute (AKTI) Advisory Member Spencer Frazer, founder of SOG Specialty Knives & Tools of Lynnwood, Washington, testified at the house judiciary committee hearing in support of HB 2347.

    “The definition of switchblade needs to be clarified, and this bill does that,” he commented regarding changes that include, “A knife that contains a spring, detent, or other mechanism designed to create a bias toward closure of the blade and that requires physical exertion applied to the blade by hand, wrist or arm to overcome the bias toward closure to assist in opening the knife is not a spring blade knife.” This is the same “bias toward closure” language that AKTI introduced and has been successfully passed in other states and incorporated in to the 2009 amendment to the Federal Switchblade Act.

    For more click on www.akti.org and www.KnifeRights.org.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb040212#BL1SU.

BLADE Show: Knife Debuts Rule!

[slideshow_deploy id=’36122’]

The BLADE Show witnessed a record number of patrons and knives—including knife debuts that were off the charts. Here are eight among the many factory knife introductions.

A 6061 aluminum handle in Class III anodization and self-lubricating roller bearings in the opening mechanism are among the cool features of the MRX-LW from Rat Worx. MSRP: $299.

The ASH 2—”ASH” stands for “Anniversary Steel Heart”—from Busse Combat Knife Co. boasts a bountiful 9-inch blade of the company’s quarter-inch-thick INFI carbon steel.

The Spectrum from Emerson Knives, Inc., has a 3.8-inch blade of 154CM stainless and a NASA-certified black G-10 composite handle. MSRP: $263.95.

Pohl Force adds to its “Mike” line with the Mike Four Tanto in a hard-coat anodized aluminum handle with a glass-breaker screwed into the butt, and a stylish lanyard sporting a skull bead.

A new Integral Lock folder from Chris Reeve Knives, the Inkosi is a cool gent’s folder with a 2.75-inch blade of CPM S35VN stainless steel. Closed length: 3.875 inches. MSRP: $375.

Brous Blades gives the bird’s-beak handle butt a fresh look with the Enforcer flipper folder in the karambit style. MSRP: $319-$359.

Buck’s Inertia assisted opener sports a 3 1/8-inch blade of stonewashed 420HC stainless and an anodized aluminum handle. MSRP: $90.

The first-ever collaboration between Spyderco and Canadian custom knifemaker Brian Tighe, the Tighe Stick is highlighted by a titanium handle 3D machined with Tighe’s trademark swirling-groove look and texturing.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments in the world of knives with a subscription to BLADE magazine!

ABS 2nd All-Forged Blade Exposition This Weekend

0

If any of you are in the area or simply want to get away this weekend, the American Bladesmith Society will have its 2nd All-Forged Blade Exposition Aug. 20-21 at the Sheraton Gunter in San Antonio, Texas. Check out some of the world’s best handforged knives, damascus knives and much more, visit the Alamo, check out the riverwalk, and just plain have a good ol’ time in ol’ San Antone. For more info go to www.americanbladesmith.com.

Complete Your Collection Of BLADE Magazines

Next month will be your chance to complete your collection of BLADE Magazines–to own every issue from 1973 through 1997 (the first quarter century of BLADE and 165 issues in all) on one completely searchable DVD. BLADE and F&W Media will be offering the DVD the third week of October for $59.99, which equates to 36 cents per issue.

Use the “Bookmarks” feature on the DVD to navigate to whatever story, feature, index, ad, regular column or individual knife you wish to see, read about and admire. Such is the beauty of accessing all issues in living color on your computer screen.

Check www.shopblade.com over the next few weeks to reserve your copy.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement