The CJRB Crag Is A Fairly-Priced Knife That Looks Great, Cuts Greats, And Is Absolutely Worth The Investment.
Lighter isn’t always better. As many makers produce more and more knives that are at or below two ounces in weight, a bigger, beefier folder can stand out and appeal to a different type of consumer. Enter the CJRB Crag.
This tactical folder looks cool and feels hefty in all the right ways at 6 ounces in weight. The 3.43-inch blade is flat ground and has a black PVD coating to help with corrosion resistance. It’s ready to rock and roll out of the box thanks to being treated to a 59-61 HRC. The cleaver-style blade is an excellent chopping tool. This knife was built to confidently chop and slice.
What makes it feel even more rugged than it is is the handle. The carbon fiber handle is incredibly light and allows for the weight to be allocated elsewhere in the construction.
What CJRB has done is create a knife that will stand up to intense use and done it to keep things affordable for the consumer. It’s a win/win all the way.
Small-in-stature clip points that punch above their weight.
There’s a reason Buck Knives chose a clip-point blade for their iconic, mega-selling Model 110 as the blade style for their folding knife. The profile has a history of being a hard-working blade. The clip point’s most distinguishing characteristic is a noticeable change in the downward angle of the blade in its spine, which makes for a sharper angle of the blade toward the tip. This change can be subtle to severe, but it always results in a thinner blade height. In essence, the break in the blade angle “clips” it to a thinner, sleeker, more pointed shape. In this BLADE® feature, we’ll look at four modern and totable clip points and their attributes to see how they fit your needs.
Civivi Slippy Sendy
The Civivi Slippy Sendy weighs a paltry 1.90 ounces, making it an ideal light pocket carry or unobtrusive desk companion. If you don’t need a rough-and-tumble brawling knife, this is a good, lightweight option.
The Civivi Slippy Sendy is the only gentleman’s folder of our test group, and it carries the banner well. Having no pocket clip, it is made for pure loose pocket carry, and at just 1.90 ounces, its weight is no issue. The Micarta handle is a simple slab-style with an overall length of 3.7 inches with a flat, rounded-cornered top that ends in a 1-inch, semi-circular base. The backside scale has a 1/2-inch cut-out that allows the user to access the blade’s rectangular nail nick to engage the blade.
The 2.8-inch blade has its clip breaking 0.80 inch from the tip, while the cutting edge is 0.60 wide, flat-ground and is rounded toward the tip. The blade is Nitro V stainless, a very respectable proprietary knife steel from New Jersey Steel Baron that allows the Civivi Slippy Sendy to punch above its class.
The author kept the Civivi Slippy Sendy on his office desk for a few days and tested it cutting various and sundry “desk stuff.” The 2.8-inch Nitro V stainless blade was plenty sharp and did a good job of cutting crisp, sharp lines on this card stock.
This is an all-round lightweight pocketknife that is very good for light duty around the home, office or on the go. It is not a tactical knife because it doesn’t lock up or have a fighting blade style of thick blade steel. That said, the Civivi Slippy Sendy is handy for tackling mail duty, light meal prep and other unexacting duties encountered daily. I tested it on heavy card stock, packaging twine and thick packing tapes of all types and found the upgraded steel and comfortable ergonomics both handy for all-around use daily.
Cold Steel Engage 2.5
The Cold Steel Engage’s 2.5 sports a 4116 stainless steel made by Böhler of Germany. Of all the knives tested, this is the one that most resembled a modern-day tactical knife.
The Cold Steel Engage 2.5 may be small, but it’s a lot of knife in a 6-inch package. The blade width is just shy of 1-inch wide (0.90-inch), and it looks like a scaled-down tactical, which, in fact, it is. This knife is a shrunken version of the Engage 3.5 and is part of a whole series of varied models in the same platform. The Engage 2.5 is named for its blade length, leaving 3.5 inches for the handle.
The 2.5-inch clip-point blade is 4116 stainless steel made by Böhler of Germany, which opens via ambidextrous thumb studs on either side of the blade. The handle features Cold Steel’s patented Atlas slide lock located on the upper spine. An ambidextrous 1.5-inch pocket clip is located on the rear base.
Even though its steel didn’t sport an upscale moniker, the Cold Steel Engage 2.5 did a yeoman’s job of cutting sharp, crisp lengths of this tough leather.
I tested the Cold Steel Engage 2.5 on some thick, cured boot leather. Taking off lengths of the tough material in strips using a metal ruler as a guide, the blade of the knife never wavered or tried to change angles as lesser steels are prone to do. The curved front tip of the blade dug in at an angle and stayed on course with each slice and despite the blade not being a glitzy name brand, the 4116 stainless did its job well and the Engage 2.5 proved its worth.
Demko Knives Nano Shark
Demko Knives’ Nano Shark is a lot of knife packed into a short, 5.8-inch package. The Nano Shark’s 2.25-inch blade sports a large blade for its size.
The Demko Knives Nano Shark is a pint-sized EDC designed for serious slicing. The very slightly curved blade has always been a workhorse, but during the modern tactical knife era, many edged weapons specialists embraced the blade for its ability to grab and not let go until it had done serious damage.
The Nano Shark has a 2.25-inch blade that breaks to its clip 1 inch into its traverse forward, then breaks downward again where it meets the blade’s flat-ground edge. The upper rear portion of the blade features a healthy, rounded cutout for opening the blade once the user has released it via a pull-down thumb lock. The Nano Shark’s 3.5-inch GRN handle is ample enough to house the entire blade with only the thumb cutout protruding. A reversible 1.75-inch pocket clip completes the package.
The Nano Shark may be a short knife, but it acts like a behemoth thanks to its tall profile and blade thickness. The blade is similar to a short bowie, which makes it a serious small work knife. I tested it as such on a stubborn 3/8-inch synthetic rope. I started by just taking off short lengths on a flat surface before tying a large knot into both ends and free-handing the excess off each knot. I ended up with two tidy knots at each end. When in doubt, practice first!
Big Idea Design TI Lookout
The only fixed-blade in the group, the 6.2-inch Big Idea Design TI Lookout sports a full tang underneath its scales.
The 6.2-inch Big Idea Design TI Lookout is a simple fixed-blade knife with very few parts to break so it is better for stronger tasks. The Ti Lookout is basically one large piece of premium CMP MagnaCut stainless steel from tip to base with two lightweight, diagonally textured Grade 5 Titanium handle scales for gripping. Aside from the few pieces of hardware holding the handle together and forming its lanyard fitting at the base, that’s basically the sum of parts.
With so few parts to break, the fixed-blade can handle larger, tougher tasks. The downside is the user doesn’t have the compact convenience of a folding knife, but sometimes it is necessary to get the job done. The Lookout comes with a small 4.5-inch black Kydex sheath with a steel hanger fitted to the rear for added strength.
The Ti Lookout fixed-blade offers the safety of having no moving parts to break under extreme pressure whereas the folding knife can be vulnerable at its blade pivot. When in doubt, call on a fixed blade for the tough chores.
I gave the little fixed Ti Lookout a run for its money on a length of dried redwood 2-by-4. Holding the plank vertically, I dug the blade in at an angle, taking off shavings and holding in consecutively longer and deeper lengths. The Big Idea Design fixed-blade bit in and did its job until its size was simply outweighed by the larger length of wood, but not before the small fixer had proven its worth. I never felt during the process that the Ti Lookout was going to fold or break. That’s why you use a fixed-blade for the tough jobs.
Nothing cuts as wicked a profile as a tanto knife.
The tanto is one of the most iconic and recognizable knife designs to ever forged, and today you can find it being made all over the world. From pocket folders to heavy fixed blades, there are a lot of Tantos to choose from.
Today, we’re going to go over everything you need to know about the tanto, from its history and modern usage to the best modern examples you can add to your collection.
Let’s dive right in.
Tanto Knives: Rich, Battlefield-Proven History
Japan has gifted the world with some excellent things: sushi, Godzilla, anime, the Honda Civic… list goes on. Perhaps some of the most iconic pieces of Japanese culture to spread around the world though are its blade designs.
The katana is probably the most famous in terms of combat-focused designs, but a close second is the beloved tanto. A very core idea of many sword-based Japanese martial arts is the idea of daishō, which translates to “big-little”.
Daishō essentially just means having one long sword, and one short sword or long knife to accompany it. Traditionally, the larger sword would often be left outside when entering a palace or other government building, or a temple, and the shorter weapon would be carried inside, tucked through a sash.
The Sidearm of Choice Before Pistols
Originally conceived as a sidearm to be paired with a long sword, the tanto was first carried primarily by Samurai alongside a tachi, the precursor to the katana most of us are familiar with from modern popular culture.
Over time, the tanto become more widespread, and a smaller version known as a kaikenbecame popular as a self-defense tool for women. Over several hundred years, the tanto became shorter and thicker, and closer to the blade we know today.
Photo: Wikipedia
Though eventually replaced in serious warfare by the wakizashi (functionally just a shorter katana, though with some design differences) the tanto remained popular for ceremonial usage and became a matter of pride and expression to wear or own in later years.
The tanto then saw a resurgence in the years leading up to WWII, as they were viewed as more traditional by the Imperial Court. Following Japan’s defeat, limits on sword forging caused a decline in all traditional Japanese sword-making.
In the 1960s, American and European obsession with Japanese martial arts (spurred on by excellent films such as 7 Samurai, Yojimbo, and others) lead to a resurgence of the tanto, particularly as a combat-focused knife shape.
Today, the iconic tanto tip is found on traditional full-length fixed blades, as well as more modern folding pocket knives designed for tactical/defensive use. Plenty of manufacturers make tanto-tipped knives, as well as smiths making excellent traditional tantos. (We’re going to cover both in our reviews, don’t worry).
What makes a Tanto, a Tanto?
Today, the definition of a tanto has shifted far beyond the traditional knife of 10th-century Japan, but we’re going to start there and then we’ll talk about the more modern incarnation where we see tanto tips added to a variety of EDC and tactical knives.
Traditional Tanto Blades
Originally, the tanto was more what we would call a short sword, or perhaps a long dagger, and was worn by samurai. It was very much a weapon to begin with, but become a more ornate and ceremonial piece over the years as weapon designs evolved.
The traditional tanto was a single or double-edged dagger with a length of around 6-12 inches and was designed primarily for stabbing. It was forged with very flat sides, and some were left short with an extra thick cross-section to aid in piercing armor.
Modern Tanto Blades
The more modern interpretation of the tanto is heavily influenced by American tactical knife designs and proves more common outside of Japan. Traditional blades are still made (and beautiful) but less practical for the modern world.
A variety of American and European knife makers now produce tanto-inspired knives with a very angular tip with the iconic sharply-upswept blade tip, essentially leaving you with two cutting planes—one parallel to the spine of the knife, and one at a 45-degree(ish) angle to the spine angling up towards the tip.
Most of these modern “American tanto” designs are folding knives, and while many are for “tactical” or defensive use, the tanto blade shape has become increasingly popular for EDC knives as well.
Pros of the Tanto Design
Piercing: Piercing, piercing, piercing. The shape of the tanto is optimized for stabbing and piercing, and it excels in those contexts.
Whether you’re a pre-Edo period Samurai trying to slip a blade between (or through) segments of your opponent’s armor, or a frustrated office worker attempting to poke your way into some plastic clamshell packaging, the tanto is ideal for putting a hole in something.
We see similar knives used for leather work around the world, and with good reason. The tanto is great for putting a hole in tough material.
Draw Cuts: Modern American tantos are also great for draw cuts and slices, particularly when you’re working with something on a flat surface like a cutting board. The dual edge geometry makes short work of many slicing tasks.
You can also (carefully) use that second point where the two edges meet like a chisel for shaving wood, scraping a sticker, etc. This makes for a very handy EDC.
Defense: Lastly, as a defensive tool, tantos excel because of their narrow, piercing point. This point easily defeats heavy clothing and makes for an effective means of defense in skilled hands.
Many knife-based martial arts focus on stabbing strikes as the most effective fight-enders, and the tanto fits that training paradigm very well, while still being perfectly capable of slashing.
Cons of the Tanto Design
Cutting Edge: The tanto’s main drawback, besides additional time and care needed when sharpening, is the fact that you lose some usable blade edge by having essentially two edges, one parallel to the spine and one swept forward and upwards.
In practical use, this means you have less effective blade length for certain tasks, around 20% less than you’d have with an equivalent-length drop or clip-point blade. To compensate, tanto blades intended for EDC are usually a bit longer than a similar knife with a different point.
All of this can be adjusted for, and as long as you aren’t doing something like spoon carving, you probably won’t notice a difference in real-world use.
At the end of the day, “real-world use” for most of us is opening boxes and packaging, and slicing apart those god-awful packing straps used to hold children’s toys in display boxes. And the tanto excels at all those tasks.
How The Hell Do You Sharpen a Tanto?
Sharpening a tanto may look a bit scary, but once you break the process down, it’s quite simple. All you’re doing is sharpening two edges that meet at a point. The only real pitfall is that it’s easy to round over the point where the forward edge and the edge parallel to the spine meet.
To avoid this, be mindful of that meeting point, and stop your sharpening stroke on or before it. Then, when sharpening the forward edge, rotate the blade and sharpen it in much the same way you would a chisel.
Just be careful not to pull through the point where the two edges meet so you don’t round over that point and you’ll be good to go. Beyond that, it’s just like sharpening any other knife.
10 Ten Knives with Tanto Blades: EDC, Fixed Blades, and Folders
CIVIVI Elementum Tanto
The CIVIVI Elementum has become something of a modern classic in the EDC knife world. Since its release a few years ago has gone on to become one of the most popular pocket knives around.
There is a nearly limitless amount of blade and handle combinations out there now, but we’re going to focus on this excellent tanto blade with a copper handle.
At its core, this is still the same Elementum knife aficionados are already familiar with (a simple, dependable liner-lock flipper folder) but outfitted with a tanto blade that makes piercing tasks a cinch, without compromising on slicing performance.
Basically, it’s everything you need in an EDC knife for regular daily tasks, and it comes with a gussied-up stonewashed tanto blade and a lovely hand-polished copper handle that adds a touch of class and elegance to this very affordable knife.
The Elementum tanto is also available in a button lock version and features a 2.96-inch blade made of D2 steel.
MSRP: $80
Kershaw Emerson CQC-7K
Ernest Emerson has brought much success to Kershaw with his designs. Back in 2014 he hit it out of the park again with the Emerson CQC-7k, which won that year’s Best Buy award at BLADE Show for sheer value. In the almost ten years since it’s held its own as one of the best EDC options out there.
It features the iconic Emerson Wave that facilitates blade deployment by simply pulling it from the pocket and hooking the “Wave-Shaped Feature” on the pocket on the way out (sort of an inverted kicker).
It also features an ambidextrous thumb disk that doubles as a comfortable place to press your thumb when doing fiddly work. The scales are nicely-textured G10, and the handle features a stainless frame lock that is one of the more secure we’ve tested (read: beat the hell out of).
The one thing to look out for is the blade steel. I would suggest spending an extra few bucks on the D2 stainless version and avoiding the 8cr14Mov version. There’s no reason to spend more than $40 on a knife with bottom-tier blade steel like that in this day and age.
You can get five gas station knives for that price and be better off.
The Emerson CQC-7K has a D2 blade that is 3.25-inches long.
MSRP: Starting at $74
Benchmade Bailout
You’ve heard of the Bugout, surely. Now meet its newer, slightly-tacticooler cousin, the Bailout (one of my favorite knives of the past several years).
As you can surely imagine, the Bailout is a bit of a riff on the Bugout most of us knife fans know and love, but with some notable changes. Our favorite version is the CPM-M4 model which features woodland green anodized aluminum handles.
CPM-M4 is a great steel, which you would expect from Benchmade, and the knife itself is the perfect length to straddle the line between EDC knife and tactical folder. It also features a lanyard loop if you’re one of those people who like lanyard loops, and more interestingly a micro glass breaker.
How often do you need to break a car window in an emergency? Probably not very often, but it is nice to have it if you’re leaning toward a more tactical-style knife. You can also get a version that doesn’t have the glass breaker or the aluminum handles if you want to save a bit.
The Bailout features a 3.4-inches, CPM-M4 blade.
MSRP: $129
Ontario Ti-22 Equinox
Ontario Knife Co. is one of the most criminally underrated makers out there. Everything in its catalog is smartly designed and intended to excel in real-world conditions. That includes the Ti-22 Equinox.
It features, as the name suggests, a full titanium handle and an S35VN blade coated black to inhibit rust and corrosion in difficult environments. S35VN is a premium steel that holds an edge incredibly well, and the lightweight titanium handle is as robust as you could ever want.
The action is flippy and fidget-friendly, and the handle feels comfortable during extended use. The blade slices paper right out of the box, and comes to a sharp angle where the forward edge meets the primary cutting edge, giving you plenty of piercing power.
Draw cuts, slicing, and even some camp kitchen prep were easy and straightforward, and the knife handled being carried on a sailboat for a week without showing any signs of rust. All in all, a great EDC that again toes the line towards the more tactical/defensive side of things.
The Ti-22 has an S35VN blade that is 3.03-inches long.
MSRP: $138
Case Kinzua
Case Knives made a flipper! Several actually, with the Kinzua being part of the first line of Modern Everyday Carry Knives to come from this iconic brand.
This isn’t your grandad’s Case knife, though we love some of those old three-blade traditional babies as much as anyone. These are incredibly modern designs for a modern audience that expects things like one-handed opening, a frame lock, and a deep-carry pocket clip.
In addition to all that, the Kinzua (named for a scenic forestry area in Allegheny County, PA) features an S35VN blade and faceted anodized aluminum handles that are a joy to hold. The flipper tab is nicely contoured, and the knife opens and closes smoothly.
The tip is a now-familiar American tanto and is great for piercing pesky packages, or anything else you might need to poke a hole into during your daily life.
MSRP: $179
Spyderco Paramilitary 2 Tanto
The Spyderco Paramilitary 2 (or PM2) is beloved in the EDC community, and it’s not hard to figure out why.
It features a polished washer pivot system that is very smooth to open and close, features Spyderco’s iconic compression lock, and now, for the first time, comes with a tanto blade.
That blade is made of CPM-S30V steel, one of the best you can get in a pocket knife at this price range. Sharpening isn’t too difficult, and the edge will last you a very long time, even with aggressive daily use battering away as you slice open Amazon boxes (or whatever).
The PM2 has fine-textured G-10 handle scales out of the box, but you and your trusty screwdriver can pop those off and replace them with any one of roughly ten bazillion aftermarket options. Companies like Flytanium keep PM2 owners well-supplied with choices.
MSRP: $246
The Spyderco PM2 Tanto features a 3.44-inch blade made of CPM-S30V steel.
Cold Steel Recon Tanto
Of course, we can’t have a list of modern tanto knives without bringing out something from Cold Steel, the progenitors of the modern “American tanto” that is the most accurate description of most of the knives on this list.
Their Recon Tanto is our first fixed blade on this list and is positioned as a tactical/rescue blade. The incredibly robust SK5 steel used in the blade is a common for hard-use tools like machetes and survival knives, particularly military ones.
The grip is made with Kray-Ex, which is designed to maintain good friction in the hand at all times, even if your hands are wet or you’re wearing gloves. It also doesn’t shred your paws like some rougher materials.
If you’re looking for a more tactical tanto that can handle everything from camp tasks to self-defense, this is a great option that is a bit heavy, but bomb-proof and reliable.
The Recon Tanto has a 7-inch SK5 high-carbon steel blade.
MSRP: Starting at $70
Chaves Redención Street Tanto
Ramon Chaves is a custom knife maker that has made a name for himself as one of the premier designers of tough, hard-wearing, but still stylish blades. His Redención tanto is…very expensive, and worth every penny, exactly the way a custom knife should be.
If you’ve got the cash and you like the look of it, especially if you enjoy the artisan nature of a custom knife, go buy that.
For those of us with slightly less to spend, Reate has put out a production version of the Redención that comes with a slightly more obtainable street price and is considerably easier to find in stock.
Ramon works hard, but it’s always going to take longer to produce a custom knife than a production knife coming from a factory with purpose-built tooling. The Redención Street is a great way to get your hands on the design, without waiting months for the custom version.
The Street Tanto is an incredibly well-built framelock folder with an aggressive piercing tip. Despite a 3.63-inch blade length, the whole thing weighs in at just over 6oz thanks to the titanium handle design (which you can get in about two dozen different colors).
The blade is made from the fabulous Bohler M390 steel, one of the best you’ll find in a pocket knife.
MSRP: $300
Siam Blades Traditional Black Copper Hira Tanto
Lastly, I’m throwing in a little treat for the two or three of you reading this who came here looking for traditional, no-fooling, tantos made the old way. Siam Blades is a traditional blacksmith shop located in Thailand, but they have Japanese-trained smiths that create blades using traditional methods.
For most people, this is going to be a good balance of value and authenticity. A traditional tanto made in Japan will probably run you about three times what this one does. The Black Copper Hira tanto is made to a similar standard, in the same traditional way, and is as beautiful as it is functional.
Best of all, they have stock ready to ship, so you don’t have to wait 18 months for your tanto to be finished and shipped. I’ve chosen the Black Copper version here, but there is a large variety available depending on what aesthetic you’re going after.
The blade itself is made of extremely durable high-carbon SK5 steel (very common in machetes, and battle-ready sword reproductions) and is 9.5-inches long.
MSRP: $820
Final Thoughts on Tanto Knives
The tanto is an iconic design, whether we’re talking about the traditional Japanese original or the modern American remix. This knife shape has stuck around for a thousand years for a reason.
Today, most production tantos are more in the American style at least as far as the tip goes, but this battle-tested design has its roots going back much farther. I hope you’ve enjoyed this brief look into that long history, and you’ve got a better idea of what your options are for picking up a tanto of your very own.
The New Andromeda From Artisan Cutlery Is A Gorgeous, Sturdy Folding Knife That Works Just As Good As It Looks.
Made in collaboration with Ray Laconico, the Andromeda from Artisan Cutlery is a gem. The folder features a 3.42-inch M390 stainless steel drop point blade with a stonewash finish treated to a durable 59-61 HRC.
The handle is where the Andromeda visually shines. The entire construction is made from gray titanium for a sleek, clean look, but it is the single piece of blue & black fat carbon on the side opposite the clip that makes the knife stand out.
The key feature on the knife is the deployment method. There’s a traditional dual-sided thumb stud and an inset button lock for one-handed deployment making the Andromeda one of the first Artisan models to feature it.
Folder or fixed blade, EDC or kitchen and more, one of these will fill the bill.
In the wake of BLADE Show 2024 there is a slew of new knives hitting the custom and factory markets. We scoured both to bring you some of the latest and greatest handmade and production gems. Keep your eyes peeled for these fantastic options hitting dealers’ shelves soon.
Triple C Knives Model #3
Knife pattern: Fixed-blade hunter Blade length: 4” Blade material: Damascus of 5160 carbon and 15N20 nickel-alloy steels Blade grind: Hollow Handle: Mammoth ivory Bolster: Stainless steel Overall length: 7.75” Maker’s price for a similar knife: $1,000 Maker: Triple C Knives (SharpByCoop image)
Bubba Crouch Trapper
Knife type: Slipjoint Blade length: 3 7/8” Blade steel: Damascus forged by ABS master smith Rick Dunkerley Blade grind: Hollow Handle material: African goat horn Handle frame: 416 stainless steel in an integral construction Bolster: 416 stainless Knife to know: The CPM 154 stainless backspring features filework; the arrowhead shield is damascus Closed length: 4” Maker’s price for a similar knife: $2,500 Maker: Bubba Crouch (SharpByCoop image)
Erik Fritz Petty Chef’s Knife
Blade length: 6.5” Blade material: Triple-quenched 52100 carbon steel Blade grind: Flat w/convex edge Handle: Buckeye burl Bolster: 416 stainless steel Overall length: 11” Maker’s price for a similar knife: $400 Knife to know: Erik Fritz is an ABS journeyman smith Maker: Erik Fritz (Jocelyn Frasier image edit)
Ben Akin Bowie
Blade length: 83/8” Blade material: W2 tool steel w/hamon Blade grind: Flat Handle: Box elder burl w/carbon fiber and red G-10 spacers and a mosaic pin Guard: Wrought iron Overall length: 135/8” Knife to know: Ben Akin is an ABS apprentice smith Maker’s price for a similar knife: $800 Maker:Ben Akin (Jocelyn Frasier image edit)
Egginton Presentation George Wostenholm I*XL barlow
Knife type: Slipjoint Blade length: 2.16” Blade steel: 420S45 stainless Blade pattern: Clip point Blade finish: Crocus polished Scales: Stabilized birch burl in Cutlers Company green Bolster: Nickel silver marked w/400-year anniversary emblem Knife to know: Commemorates the 400th year of The Company of Cutlers in Hallamshire, UK; The Company of Cutlers was formed by an act of Parliament in 1624 to “protect and promote the cutler and steel products made” in Sheffield, England; made in a limited edition of 2024 in recognition of the company’s 400th anniversary year; each knife is serial numbered Weight: 2.18 ozs. Closed length: 3.16” Country of origin: United Kingdom MSRP: $185 at press-time exchange rate Company:Egginton
Boker Plus Gust Copper
Knife type: Manual one-hand folder Designer: Serge Panchenko Blade length: 2.87” Blade material: D2 tool steel Blade @ thickest: .14” Blade pattern: Drop point Blade finish: Stonewashed Blade opener: Thumb hole Handle material: Copper w/hole for a lanyard Lock: Framelock Pocket clip: Tip up, right-handed Weight: 4.44 ozs. Closed length: 3.7” Carry: Nylon pouch Country of origin: China MSRP: $119.95 Company:Boker Plus
Valhalla Blades Surtr
Pattern: Bowie Blade length: 11” Blade material: 1084 carbon steel Blade grind: Flat Handle material: Dyed, stabilized maple burl Guard: Brass Overall length: 16” Maker’s price for a similar knife: $250 at press-time exchange rate Maker: Valhalla Blades (Rod Hoare image)
TOPS Knives Shadow Hunter
Knife type: Fixed blade Blade length: 4.5” Blade material: 1095 carbon steel Rockwell hardness: 56-58 HRC Blade @ thickest: .19” Blade finish: Tungsten Cerakote® Handle material: Black canvas and tan canvas Micarta® Weight: 10.1 ozs. Overall length: 9.25” Sheath: Tan Kydex Weight w/sheath: 12.8 ozs. Knife to know: While the original was a favorite of company founder Mike Fuller, the new iteration is fine-tuned for enhanced performance, including a more ergonomic handle, slightly extended blade and modernized finishes Country of origin: USA MSRP: $250 Company: TOPS Knives
Montana Knife Co. MKC Whitetail
Pattern: Hunting knife Blade length: 4” Blade @ thickest: .135” Blade steel: MagnaCut stainless Blade pattern: Drop point Handle material: G-10 Construction: Full tang Overall weight: 4.3 ozs. Overall length: 8 5/8” Sheath: Kydex, open carry, reversible quick-attachment belt clip, vertical handle down or horizontal carry, built-in retention screw to customize blade tension Knife to know: Also available in buck skin, black, green and black, tan and black, and grey handle colors; integral guard; gimping on blade spine Country of origin: USA MSRP: $315 Company:Montana Knife Co.
The Australian Cutlery Fixed-Blade Hunter
Blade length: 4” Blade steel: CPM S35VN stainless Blade grind: Hollow sabre Blade thickness @ ricasso: 1/8” Blade @ widest: 1” Blade finish: Bead blast Handle material: Hunter orange G-10 w/bead blast finish and custom Australian cutler mosaic pin Overall length: 8.5” Sheath: Matching hunter orange Kydex model made by Adam Grosskopf Maker’s price for a similar knife and sheath: $230 at press-time exchange rate Maker: The Australian Cutlery (Rod Hoare image)
Spyderco Manix 2 MagnaCut Lightweight Salt Knife Yellow Polymer
Knife type: Manual one-hand folder Blade length: 3.375” Blade steel: MagnaCut stainless Blade grind: Flat Blade @ thickest: .13” Blade pattern: Drop point Blade finish: Satin Blade opener: Thumb hole Handle material: Yellow polymer over stainless steel liners Lock: Ball-bearing lock Pocket clip: Reversible, tip up Weight: 3 ozs. Closed length: 4.625” Country of origin: USA MSRP: $232.99 Company:Spyderco
Cold Steel Espada XL
Knife type: Folder Blade length: 7.5” Blade steel: AUS-10A stainless Blade @ thickest: .137” Blade grind: Hollow Blade pattern: Clip point Blade finish: Black PVD Handle material: Ruby red G-10 Lock: Tri-Ad Lock Pocket clip: Blade tip up Weight: 14.8 ozs. Closed length: 9.25” Knife to know: The knife is inspired by the classic Spanish navaja folder and is a collaboration between Lynn Thompson and custom knifemaker Andrew Demko Country of origin: Taiwan MSRP: $299.99 Company:Cold Steel
The latest American-made factory knives are sharp and sweet.
Reiff Knives Rangewolf
Knife type: A lightweight, compact utility model for hunting and EDC Designer: Stu Shank Blade length: 3” Blade steel: CPM MagnaCut stainless Blade grind: Full flat Blade finish: Stonewash Blade pattern: Drop point Handle material: G-10 or canvas Micarta® Handle material options: Black & orange G-10, black G-10, OD green G-10, green canvas Micarta, black canvas Micarta Weight: 4.5 ozs. w/G-10, 3.9 ozs. w/canvas Micarta Overall length: 7.12” Special features: Full spine gimping along 3/4 of the blade; gimped ramp on front of scales for pinch grip; textured, ergonomic handle for secure, comfortable use; recessed lanyard hole; gimping fore and aft of handle for added grip Sheath: Leather pocket model w/UltiClip (2 leather options); leather scout carry belt model (2 leather options); Kydex model w/2x IWB Pull-the-DOT belt loops MSRP: $325 Available: NOW
Kershaw Bareknuckle Duralock
Knife type: EDC folder Designer: Kershaw original Blade length: 3.5” Blade steel: CPM MagnaCut stainless Blade finish: Black PVD Handle material: Aluminum Weight: 3.4 ozs. Lock type: DuraLock Pocket clip: Reversible, extra-deep carry Closed length: 4.74” Special features: Manual folder blade pivots on KVT ballbearings MSRP: $269.99 Available: NOW
Boker USA Backcountry
Knife type: Fixed blade Blade length: 3.6” Blade steel: 154CM stainless Blade @the thickest: 0.09” Blade finish: Horizontally brushed Blade pattern: Drop point Construction: Full tang Handle material: Black G-10 Weight: 2 ozs. Overall length: 7.5” Sheath: Black Kydex MSRP: $199.95 Knife to know: The Backcountry is the first Boker knife made on American soil since 1945; detailed gimping at blade spine and near the tip; includes hole for a lanyard Available: NOW
Boker USA Backcountry Fixed Blade Knife Orange G-10 02BU0001
Knife type: Pocket fixed blade Designer: Anthony Marfione Jr Blade length: 2.5” Blade steel: MagnaCut stainless Blade material options: Will be available in Magnamax steel starting with the tanto pattern in 2026 Blade pattern: Bowie Blade finish: DLC Handle material: G-10; also available in carbon fiber Overall length: 6” Special features: Pressed G-10 scales available in different colors; comes w/lanyard Sheath: Leather by JRE Industries w/reversible UltiClip MSRP: Starting at $265 Available: NOW
Full model name: 4 3/8” White Smooth Bone Handle w/Carbon Fiber Bolster Lawman Knife type: EDC folder Designer: Bear & Son Cutlery Blade length: 3.25” Blade material: D2 tool steel (also available in damascus) Blade grind: Taper (flat) Blade finish: Satin Blade pattern: Drop point Handle material: White smooth bone & carbon fiber Lock type: Slide lock Pocket clip material: Steel Weight: 3.5 ozs. Closed length: 4.62” Special features: Ball bearing washers MSRP: $123.99 Available: NOW
Bradford USA Guardian 3.5 XL
Knife type: EDC fixed blade Designer: Bradford Knives Blade length: 4” Blade steel: AEB-L stainless Blade grind: Sabre Blade finish options: Stonewash, nimbus or black DLC Handle material options: G-10, carbon fiber or Micarta® Weight: 4.7 ozs. Overall length: 8.25” Sheath: New vertical and horizontal model MSRP: $199 Available: NOW
Winkler Knives WK Belt Knife
Knife type: Outdoor/tactical fixed blade Designer: BLADE Magazine Cutlery Hall-of-Fame® member Daniel Winkler Blade length: 4.5” Blade material: 80CrV2 carbon steel Blade grind: Flat w/false edge Blade finish: No-glare black oxide Blade pattern: Trailing point Handle material options: Walnut (pictured); black, brown, green & black, & natural (WASP); G-10 camo; maple Weight: Varies based on handle material; as pictured 7.2 ozs.; as pictured plus sheath, 11.4 ozs. Overall length: 9” Special features: Full tapered tang, thumb index filework Sheath options: Lined Boltaron® w/leather cover; black leather w/synthetic-handle knives; brown leather w/wood-handle knives; clip system facilitates multiple carry options/positions; Discreet Carry Concepts: spring steel belt clip (Monoblock) MSRP: $350 Available: Select configurations currently available; all others available for order (2-3 month turnaround)
Rick Hinderer Knives XM-18 3.5″ Bowie
Full name of knife: Aluminum Automatic XM-18 3.5” Bowie Knife type: EDC folder Designer: Rick Hinderer Blade length: 3.5” Blade steel: S45VN stainless Blade finish: Stonewash Handle material: Aluminum-orange w/Lava Flow FCF inlay Weight: 5.12 ozs. Lock type: Button lock Closed length: 4.75” Special features: The titanium half liners are patent pending MSRP: $475 Available: Spring 2026
Chris Reeve Knives Backpacker
Knife type: Outdoors Designer: Chris Reeve Knives Blade length: 4.019” Blade steel: CPM MagnaCut stainless Blade grind: Hollow Blade finish: Stonewashed Handle material: Canvas Micarta® Handle material options: Black or natural canvas Micarta Weight: 3.8 ozs. Overall length: 8.527” Special features: Drop-point-shaped blade w/ample belly; scales may be removed for extra-lightweight use Sheath: Kydex MSRP: $300 Available: NOW
Spyderco Para Military 2 Lightweight
Model number: C81PBK2 Knife type: EDC folder Designers: BLADE Magazine Cutlery Hall-of-Fame® member Sal Glesser & Eric Glesser Blade length: 3.47” Blade steel: CTS® BD1N stainless Blade grind: Full flat Blade finish: Satin Blade pattern: Modified clip point Handle material: FRN Weight: 2.8 ozs. Lock type: Compression Lock® Pocket clip: Metal Closed length: 4.82” MSRP: $175 Available: To be announced
Spyderco Para Military Lightweight Clip Point Knife
Knife type: EDC folder Blade length: 3” Blade steel: MagnaCut stainless Blade grind: Flat Blade finish: Stonewash Blade pattern: Wharncliffe Handle material: Aluminum Lock type: Linerlock Pocket clip: Tip up Weight: 2.8 ozs. Closed length: 4.1” Knife to know: B.O.S.S. Tech (Balls of Stainless Steel technology) leverages a ball-bearing system providing Gerber’s smoothest, most consistent deployment to date; stainless steel balls reduce friction for seamless opening every time; the cage system is designed to keep the balls contained for stable performance over the long haul MSRP: $159.99 Available: NOW
Gerber Fastball Liner Lock MagnaCut Knife Urban Blue
Custom Flipping Folders Are Becoming More And More Popular By The Day. These Are Some Of The Coolest Custom Flippers.
The energy surrounding the custom flipper folder market is rising to new heights these days with the fit and finish, good looks and liveliness of high-quality materials, incredible skill, and, best of all, imagination.
A look at the current trends among some of the best in the class offers the custom knife market perspective on the future while also allowing a moment to appreciate and absorb the excellence around us. The commitment to make flipper folders isn’t taken lightly; it involves a concentrated effort to achieve, meet, and overcome the challenges in bringing this type of custom knife to life.
Dan Thornburg – Albuquerque, NM
Of his flipper folders Dan Thornburg said, “Little things like the cutout on the lockbar or depth of bearing pockets all affect how smooth the action will be.” The blade is Moku-Mai by Baker Forge and the handle is ancient walrus ivory. Closed length: 5 inches. His price for a similar knife: $2,000. (Image: SharpByCoop)
“I really enjoy making flipper folders because of the challenge they present in both mechanical function and working with different materials,” explained Dan Thornburg of Albuquerque, New Mexico. “I like figuring out how things work or why something doesn’t.”
Thornburg got started in flipper folders after meeting Paul Lusk at a Houston knife show years ago. “This guy is one of the smartest people I’ve ever met and is one heck of a good businessman,” Dan said of Paul. “His encouragement helped my knifemaking get to the next level.”
Evidence of that next level is readily apparent in Dan’s flipper in a handle of ancient walrus ivory with damascus bolsters. Made by Baker Forge, the blade material is Moku-Mai—mokume forge welded over 80CrV2 carbon steel. Dan said it’s not unlike a san-mai construction using mokume. The product of his ingenuity reflects an intense technical appreciation.
“I don’t think I’ve changed the design as much as refined the design,” he reasoned. “Little things like the cutout on the lockbar or depth of bearing pockets all affect how smooth the action will be. I do try to keep it simple and not reinvent the wheel, so to speak.”
Thornburg succeeds handsomely in his mission, paying close attention to detail and applying a natural talent for precision. He indicated he likes the flipper tab to double as a single guard and fashions it with the same material as the blade. Then, he advises the owners of his flipper folders to learn their safe operation.
“I think, just like most things, operating a flipper folder is a learned thing,” he said. “The more you flip it open, the easier it becomes. My dad still couldn’t open the best and smoothest folder I’ve made—too old school I guess! For someone that owns and loves flippers, most will fly open.”
Eliot Maldonado – Bulverde, TX
“Having a shorter tab is easier on pockets and looks cleaner,” Eliot Maldonado stated. “When the knife is closed, the tab doubles as a guard, but it is still short enough so that it does not ‘ouch’ your finger when closing.” His flipper employs a tanto blade of Moku-Mai by Baker Forge Steel and a marbled-carbon-fiber handle and Micarta® bolsters. Closed length: 4 inches. (Image: SharpByCoop)
Eliot Maldonado of Bulverde, Texas, started his custom knifemaking career making slip joints and then saw an opportunity. About 15 years ago, he had helped knifemaking friend Alan Davis work with slippies, and Davis assisted Maldonado with linerlocks in turn.
“Soon after, and knowing the function of linerlocks, I experimented with flippers,” Eliot explained. “It was a successful outcome and the passion for flippers started.”
Eliot’s flipper in Baker Forge damascus, a Micarta® bolster, and a marbled carbon-fiber handle demonstrate his appreciation of the finer points in the endeavor. His use of materials has also progressed from the early days. Back then he used basics just in case something went wrong. As he has become more proficient, upgrades to higher-quality blade and handle materials followed.
“I also started changing up patterns, those patterns that appealed to me,” Maldonado said, “like, I enjoy making folders with a classic kind of western—cowboy—look but still make more traditional tactical-type flippers as well.”
Eliot pays special attention to the flipper tab, applying a technique that enhances the action of blade deployment.
“Of course, the use of bearings changes the game when it comes to flippers, and I like a shorter tab with a checkering or ridge for traction. I feel having a shorter tab is easier on pockets and looks cleaner. When the knife is closed, the tab doubles as a guard, but it is still short enough so that it does not ‘ouch’ your finger when closing.”
Eliot is a firm believer in the assertive action of a flipper folder, and he makes no apologies for being a purist.
“I believe a flipper should snap to open position when flicked by a finger,” he related. “Anything other than that is just not acceptable to me. The way I achieve that is by using caged bearings, stop pin position, the liner relief cut, and the perfect tolerance on the blade and back spacer. The result should be a fast opening with zero blade play and strong lockup.”
Todd Rexford – Florissant, CO
Todd Rexford’s futuristic flipper folder features a stainless damascus blade and a handle of DarkTi zirconium and titanium overlays. The overlays extend into the inside of the frame, while the mechanism features an inlaid lockbar and detent pin. Closed length: 4.6 inches. (Image: SharpByCoop)
The flipper folder genre has changed since Todd Rexford of Florissant, Colorado, began his journey some years ago. He credits demand as the catalyst for focusing his creativity on flipper folders.
“They were in their infancy when I started making them,” he commented. “There were some very good makers doing it, but back then the thumb stud still ruled the folder world. It was really my customers that wanted me to start making them, and I had ideas for my own flippers as well, for what I wanted to see and what the way forward was for my knives.”
The way forward for Todd is clearly indicated by a fine flipper folder of stainless damascus with a handle of DarkTi zirconium and titanium overlays. The overlays extend into the inside of the frame, while the mechanism features a hardened stainless pivot, inlaid lockbar, and detent pin with the Rexford radius bearing system integrated. A titanium pocket clip and back spacer complete the stunning package.
Todd sees the operation of the flipper folder as a critical element of the overall presentation, but hesitates to favor fully opening vs. more of an assisted movement.
“I don’t judge,” he offered. “If a wrist snap is needed, then so be it. We can’t forget that when I make a stiff-detent lockbar flipper, you won’t be able to open it slowly. It will open with authority and everyone around you will hear it. This goes to show that each detent force has its own place depending on the end users and their task requirements.”
Nonetheless, the smooth operation of the flipper folder is a hallmark of a successfully completed professional effort.
“The detent force, and how much preload you can place on the system before it overcomes the detent, is one factor that determines if the knife will fully open or not,” Rexford asserted.
“The other factor is the person and his or her finger,” he continued. “Through my years of building flippers, I’ve built everything on the spectrum of this force. Take a stiff detent to a show and half the people love it; half the people can’t open it. I’ve had users time some of my very fast knives in a pseudo drag race using camera-frame timing because they love it, but for a lot of people they may not be able to open that knife. At the end of the day it’s a preference, and I have stopped ‘standardizing’ my force. Yes, a flick will open the knife, but the velocity of the tip may change to suit different customers.”
The Skiff Family – Broadalbin, NY
The Culprit flipper folder by Steven Skiff, Jr. and Sr. won Best in Show at the 2022 NCCA Show. The blade is Damasteel stainless damascus in a Fafnir pattern. Closed length: 4.25 inches. The makers’ price for a similar knife: $1,495.
The father-son team of Steven Skiff, Sr., and Steven Skiff, Jr., from Broadalbin, New York, collaborates to make their own bold statement in the flipper folder realm. While Steven, Sr. makes the blades and does fit and finish, Steven, Jr. handles the CNC milling and produces blade bearings for the Skiffs’ projects, as well as bearings for other customers in the knife industry.
The Skiffs enjoy tackling the relative intricacy of flipper folder construction and relish the opportunity to demonstrate their proficiency, particularly with their team approach.
“Making flippers is a challenge,” Steven, Sr remarked. “They are deceptively simple looking to make. It can be difficult to get the action exactly the way you want. It’s that challenge that I enjoy and it makes me prefer making them over other knives.”
The Skiffs’ Culprit framelock flipper folder features a blade of Damasteel stainless damascus in a Fafnir pattern, and a titanium handle with zirconium accents and seafoam anodizing. The result is dazzling, and Steven, Sr. credits custom knifemaking greats Andre Thorburn, R.J. Martin, and Kirby Lambert for “having a hand in increasing my interest to continue making flippers.”
The flipper construction process has progressed in the years since the Skiffs began to concentrate on the style. One aspect of that progress is the addition of an over-travel stop.
“That’s an example of one important advancement that [a number of] us makers started using on framelocks a while ago,” Steven, Sr. observed. “Another advancement includes the evolution of using bearings instead of thrust washers, and we also use a hardened insert in the lockbar to prevent wear.”
The Flipper Folder Continues To Grow
The firm foundation of the flipper folder, both in popularity and mechanical and aesthetic quality, sets the stage for the future.
“I do predict we will see further refinement in materials, as well as in material quality over the coming years,” Rexford assessed. “We have also seen new locking mechanisms being adapted for the flipper category of knives.”
Maldonado looks ahead to “future advances in making a double-action flipper/auto. Of course, using new and exotic blade and handle materials is always something that keeps evolving.”
Future generations of collectors and users come to mind with Thornburg’s ideas of tomorrow. He commented, “I like to use materials that are not common when making my flippers. Mammoth, walrus and elk antler are my main scale materials, and my idea is a fine gentleman’s flipper folder for the upscale customer that will be handed down to their children.”
Altogether, the custom makers and their colleagues are doing their part to ensure that the flipper folder has staying power.
