‘Alone’ survivalist Larry Roberts praises LTWK’s Genesis

Larry Roberts appeared on the second season of "Alone" and held out 64 days in the Vancouver Island wilderness.
Larry Roberts used the L.T. Wright Knives’ Genesis to survive as a participant on the History channel’s “Alone.”

Larry Roberts, runner-up in the second season of the History channel’s wilderness survival show “Alone,” lasted 64 days in the harsh environs of Vancouver Island with one knife: the Genesis made by L.T. Wright Knives. L.T. Wright knew Roberts as a customer and because he wrote articles for the company’s Self Reliance Illustrated magazine. What he didn’t know, because “Alone” participants are not allowed to discuss the show, was which knife Roberts used on the show. When Roberts was allowed to talk about his experiences, he raved to Wright about how much he appreciated the Genesis. Wright suggested they team up, and a winning partnership was born.

On Dec. 16, LTWK introduced its Larry Roberts Signature Edition Genesis to the public. Fans of the “Alone” star and members of the LTWK Pout House club were eligible for pre-release access for 24 hours prior to the general release.

The premise of the reality show is that a group of outdoorsmen and women are deposited in a remote locale—alone—and whoever can survive the longest, wins—$500,000 to be exact. They are positioned so that natural obstacles prevent them from encountering each other. There is no crew; the participants film themselves and are resupplied with batteries and camera chips. They must build shelters, find enough to eat without expending too many calories, stave off hypothermia and marauding animals, and maintain their sanity.

So, how exactly did Roberts use his knife? The list is extensive. He built small game traps and a fish trap. He used it batonning, feather-sticking, harvesting spruce sap and cedar bark, gutting and filleting fish, processing mice and prying shellfish off of rocks. He used it to make a spoon, a spatula and a fork. He harvested mushrooms with his Genesis, cut cordage and used the sharp 90-degree spine of the knife to strike his ferrocerium rod to start fires. He used the knife to make a spear and tent stakes, and even for first-aid and hygiene tasks, such as removing a splinter or cleaning his fingernails.

The LTWK Larry Roberts Signature Genesis comes with a true 8-oz. leather sheath with dangle and farro rod loop.
The Larry Roberts version of the LTWK Genesis has a broomstick handle and sharpened spine to assist in firebuilding.

The knife measures 9 inches overall. The 4.25-inch blade has a Scandinavian grind, and the chiseled edge is ideal for bushcrafting skills like making kindling, tent stakes and stripping bark, L.T. Wright explained. It used to be, he continued, that outdoor knives were overbuilt to account for hard use in the field, but now that the education and skill level of outdoorsmen has advanced, often through watching and practicing skills learned just on YouTube, thinner-edged knives are sought after by outdoorsmen and survivalists. Roberts, too, praised the knife’s ability to bite deeply into wood.

The Genesis offers a 1/8-inch-thick spear-point blade made of A2 tool steel, following a Kephart design overall. The knives are tested to 57 to 59 HRC on the Rockwell hardness scale, so they are tough but hold an edge, Wright said. The A2 steel, in the opinion of both Wright and Roberts, outperforms O1 and 1095 for edge retention, and corrosion and stain resistance. For his time on the island, Roberts only stropped his knife on his leather belt to remove micro-oxidation from humidity and moisture. He never had to resharpen it at all.

The Roberts version of the Genesis has a broomstick handle because Roberts found the thicker handle easier to hold and control. It also has thumb scallops and a sharpened spine for striking a fire steel against. LTWK made the black Micarta handle with white liners because Roberts likes the black-and-white contrast. The blade is stamped with Roberts’ rendition of his Vancouver Island nemesis: a mouse. “It became an obstacle for me to overcome,” he said of the creature he battled during the show.

The MSRP of the Larry Roberts Signature Edition Genesis is $225 and includes a true 8-ounce black leather sheath with a dangler and 3/8-inch ferro rod loop. Wright prefers to purchase 10-ounce double-died leather from Spen Stelzer, the owner of JRE Industries in Illinois, and have it split to 8 ounces so there are no discrepancies. “We can control consistency better that way,” he explained.

Roberts wanted the largest ferrocerium rod he was allowed to have during the show, so he went with a ½-inch rod and wasn’t able to use the loop that comes with the Genesis sheath. Roberts did use the dangler, however. He explained that it allowed the knife to hang where his hand fell naturally for easy access—just like a gunslinger in a western—and yet carry out of the way of a backpack or any other gear.

Wright grew up playing Tarzan and Rambo in the woods as a boy, and, of course, the tactical use of knives and their implementation in hunting and bushcraft interested him all along. But he wanted to make a living making knives, so he listened to what people told him they wanted. “If you go to a show and come home with all the knives you brought, you’re not going to be in business long,” he said. Like the survivalist industry itself, as the education and skill levels of users advance, so too must the sophistication of the knives. Wright listened.

The crew at L.T.Wright Knives specialize in knives that are favored in bushcrafting.
L.T. Wright (front row, second from left) was surprised and happy to find out his Genesis was the knife Larry Roberts used on the “Alone” series.

At first he made knives as L.T. Wright then as Blind Horse Knives and he’s back as L.T. Wright Knives. Wright learned to make knives from R.W. Wilson, who made the tomahawks for the 1972 movie “Jeremiah Johnson,” a cult favorite among outdoorsmen. “He’s probably sold off all of those,” Wright said, “but I do have a prototype of a tomahawk he made for the Texas Rangers.”

So, it is fitting that Wright should partner up with a man who carried his knife in a reality-based outdoorsman show for the small screen. Roberts grew up in Oregon, spending as much time outside as he could, bait-fishing for steelheads in the Rogue River and bow hunting. His first knife was probably a 3-inch lockback Buck pocketknife, he said. He married his high-school sweetheart, and they had a son and a daughter, now grown and on their own.

Roberts attended the Pathfinder School, LLC Survival Classes offered in Jackson, Ohio, through Self Reliance Outfitters. An instructor at the top-rated school, Dave Canterbury, had been on Discovery Chanel’s “Dual Survival” show, and Roberts had heard about “Alone” from a season one participant named Josh Chavez. Roberts had been looking for a challenge, a real-world way to apply the skills he’d learned. “This was it,” he said, and applied online.

You can be a superb outdoorsman, Roberts pointed out, but if you can’t express yourself in front of a camera, you won’t be selected for the show. Although more shy in real life, Roberts is a natural in front of the camera. He sent along hours of footage of himself conducting survival skills. He made the cut, and a total of 20 finalists attended a boot camp in New York. They were tested on their comfort level in the outdoors in a city park. They underwent both medical and psychological testing, and were trained extensively on how to operate the cameras they would be using to film themselves for the show.

Even though Roberts eventually had to “tap out” because he could not get enough food to compensate for the calories he expended, his life has changed from being on “Alone.” He teaches now for Pathfinder and privately on his own farm. He attended the Primitive Living Skills Conference, Rabbitstick, in September in Idaho and will be attending Winter Count, Feb. 12-18 in Maricopa, Arizona.

Roberts can’t say enough good things about the LTWK Genesis. It’s everything he ever wanted in a knife, in every way. Similarly, he can’t say enough good things about L.T. and his crew at LTWK. It was on the island, at night, when Roberts began designing a tattoo he wanted to get. It incorporated everything that was important to him during the “Alone” challenge. You can read about his experiences on the show and how the tattoo both gave him something to think about and something to look forward to getting in “Star of History Channel’s ‘Alone’ Talks Survival and Tattoos,” an interview by Kirstie Kovats in Inked magazine.

Of course, the mouse figures prominently in the design, as does the knife.

‘Bushcraft 101’ teaches the fundamentals of survivability

"Bushcraft 101" is a solid place to start your wilderness survival education, and can be a continued resources as you advance in your skill level.
Dave Canterbury, instructor at top-rated wilderness survival Pathfinder School in Ohio, explains the 5 Cs of survivability in his “Bushcraft 101.”

Not sure where to start with your quest to master wilderness survival skills? Dave Canterbury, the primitive arts instructor at Pathfinder School in Ohio mentioned above, has written a book that’ll help you get back to basics, enjoy the outdoors and understand the essentials of wilderness survival.

Save

W.R. Case & Sons Acquires Timberline Knife Brand

GATCO stopped production over the summer. Bear & Son Cutlery purchased the sharpener division and W.R. Case has officially announced that they bought the Timberline knife brand of GATCO.
GATCO stopped production over the summer. Bear & Son Cutlery purchased the sharpener division and W.R. Case has officially announced that they bought the Timberline knife brand of GATCO.
GATCO, following Spyderco's lead, was a sharpening company that expanded into knives with its Timberline brand.
GATCO, following Spyderco’s lead, was a sharpening company that expanded into knives with its Timberline brand.

W.R. Case & Sons Cutlery Co. in Bradford, Pennsylvania, has purchased the Timberline knife brand from The Great American Tool Company, or GATCO. The plan at Case is to launch a new line of Timberline knives and accessories “into the existing portfolio,” according to a press release issued by Case media contact FJ Feightner. GATCO stopped production over the summer and sold its sharpener division to Bear & Son Cutlery.

“Case is excited to have acquired the Timberline brand assets, and we are developing a comprehensive market strategy around it, which includes future new products and a cohesive integration with the Case brand,” said Mark Paup, president and CEO of Zippo Manufacturing Co. and W.R. Case & Sons.

GATCO acquired Timberline in the early-to-mid 1990s, including knives designed by Timberline’s Vaughn Neeley, such as his folders with the patented NeeleyLock locking system. This transaction followed Spyderco’s lead as a sharpener company that expanded into knives.

Timberline’s specialty was tactical, hunting, utility and kitchen knives, among others. The Timberline Stealth, a tactical folder designed by Neeley, was the BLADE Magazine 1997 American-Made Knife Of The Year®. Here knife designer Swiss Bianco gives a little history of Timberline’s NeeleyLock knives.

Timberline expanded its line to include factory-custom collaborations with knifemakers like Brian Fellhoelter, Tim Herman, Russ Kommer, Greg Lightfoot, Charles Ochs and Butch Vallotton, as well as with designers like Swiss Bianco, George Sessions, Kelly Worden and Dave Young.

Timberline offered a collection of ceramic kitchen knives under the Cape Cod Collection label. In recent years, the company debuted its Javelin and Gas Monkey Garage lines.

Case has been in business since 1889. Its knives have gone from the battlefields of World War II literally to the moon. The company’s expertise is in traditional folding pocketknives, as well as fixed blade sporting knives. In 1981, capitalizing on its unique tang stamp, the company initiated The Case Collectors Club, which now has over 18,000 active members, and is one of the largest known knife collecting associations, according to Feightner.

Steve Shackleford, BLADE editor, contributed to this article.

You Can’t Have Just One Case Knife In Your CollectionW.R. Case & Sons Cutlery Co. has been making pocketknives since 1889.

W.R. Case & Sons Cutlery Co. has 18,000 active members in The Case Collectors Club. Read more about the storied history of these traditional pocketknives in “Collecting Case Knives, Identification and Price Guide.”

Knife Ed 101: From the Periodic Table to the Rockwell Hardness Scale

Jim Bowie scowls as I absorb the minutia of properly conveying knife specs.
Jim Bowie is not amused with my lack of knowledge about steel mixes.

Knowing what you don’t know sometimes means knowing when to stop researching and just play with your knife. In the course of more fully educating myself about knives, I find that everything, and I mean every little thing, involves further study. It can be paralyzing. And sometimes it needs to just get silly so I can stop worrying about it.

I’m in charge of maintaining the style sheet at BLADE, which is an alphabetical list of knife industry-specific terms and instructions—or exceptions to instructions—regarding how we present certain things in BLADE. We want to be consistent.

The other day my boss and BLADE editor, Steve Shackleford, sent me something like, “Just so you know… the V in MoV is always capitalized. For example, 8Cr13MoV: Cr refers to chromium, Mo refers to molybdenum and V refers to vanadium—all elements in the steel mix.”

Cool, I thought.

And then I thought: The periodic table of elements? Seriously?

For an English major with a history minor—even one into guns and knives—this concerned me. Oh sure, there’s science in the acids and bases of a batch of cookies in the oven, but I honestly never imagined printing out that chart after I left high school. But there it lies, adding color to the growing pile, its information so obvious in hindsight. Jim Bowie perpetually scowls with what I imagine can only be his disappointment in my slow pickup.

So, when Steve explained how BLADE presents Rockwell hardness: “the Rockwell hardness is 58-59 HRC,” I figured I should try to fit more about that topic into my rock hard head.

After work I called a friend.

His response: “What is the Rockwell hardness scale and what does it mean to me?”

Exactly, I replied.

And while we’re at it, I thought, aren’t “hard” and “tough” synonyms for the same thing, like soldiers or overcooked steak? (That’s a joke. You can read about the difference between hardness and toughness in Bernard Levine’s article, “Rockwell Hardness, What It Is And What It Means To Your Blades,” BLADE Magazine, Sept. 1997, Pages 74-76.)

And why can’t I close my Twitch II? Am I not pressing hard enough? Am I afraid of the release? (That’s not a joke, and no, the lock is not engaged.)

“I can envision both scenarios,” my friend said.

That’s how he talks.

We joke about cut-resistant gloves, only he’s not joking. I’m a klutz.

He explained something about measuring divots and my ears stopped up and my eyes glazed over. I have a hard time thinking in 3D.

But I had the power all along. In the archives of BLADE itself I found this helpful article: Bernard Levine’s article, “Rockwell Hardness, What It Is And What It Means To Your Blades,” BLADE Magazine, Sept. 1997, Pages 74-76

It all makes perfect sense. I think I can now move on to worrying about whether there’s a good mix of ATS-34, 440C, CPM S30V, CTS steels and 5160, O1, D2, 1095, L6 steels represented in our Knifemaker Showcase pieces.

Your Knifemaking Questions, Answered

Knifemaking bookGet all your knifemaking questions answered in this collection of expert advise from former BLADE columnist Wayne Goddard. The Wonder of Knifemaking makes a thoughtful gift for someone interested in starting or perfecting their knifemaking skills

 

Bear & Son acquires GATCO sharpener division

Acquiring GATCO has positioned Bear & Son Cutlery to be a true one-stop shop for knife enthusiasts.
Bear & Son Cutlery, Inc., has purchased the sharpener division of GATCO.

Bear & Son Cutlery, Inc. announced Nov. 14 that it has acquired the sharpener division of GATCO. Ken Griffey, president of the Jacksonville, Alabama, manufacturing company, said he’s been in the knife industry for 39 years, and for 28 or 29 of those years Bear & Son has worked trade shows and other events side by side with the Great American Tool Company, Inc., or GATCO, as it was better known. Griffey expressed confidence that Bear & Son can now truly be a one-stop shop for knife enthusiasts. “It’s a natural fit,” he said.

Sharpener production at GATCO ceased in June or July, Griffey explained, so the number one order of business is to get merchants restocked. For the immediate future, GATCO sharpeners will continue to be made in both the USA and China. In short order, Bear & Son executives will assess whether some manufacturing can be moved back to the United States.

All GATCO sharpeners will continue to be made with the possible exception of one or two models. In place of those, Bear & Son will debut two new sharpeners to complement its knife lines. Griffey said he saw 3D models of these new sharpeners but wants to see the real thing before he approves production and sets price. Decisions will be made in time for any new products to make their first appearance at the SHOT Show, Jan. 17-20, in Las Vegas, Nevada.

GATCO celebrated its 25th anniversary in 2014. Founded by John Anthon and originally based in Getzville, New York, its specialty was offering a wide range of sharpeners. Angle guide, pull-through, stone, diamond abrasive, ceramic, carbide—GATCO had a model. The company’s Tri-Seps sharpener was the BLADE Magazine 1999 Accessory Of The Year.

Griffey said the purchase of GATCO makes Bear & Son Cutlery a full one-stop shop for knife enthusiasts. Always strong on the outdoor and hunting side of the knife market, the company also offers its Bear Ops line that focuses on law enforcement, military and self-defense knives. A new line, the affordable Bear Edge, will offer knives with some components made in China but assembled in the USA.

Steve Shackleford, BLADE® editor, contributed to this article.

 

gear-care-kit-field-grade-tinThis Gear Care Kit Field Grade Tin is a perfect stocking stuffer and includes a GATCO Super Micro sharpener.

 

Save

Save

Benchmade Drops HK Knife Line to Refocus on Own Brand

 

Benchmade ceased production of all HK knives. The initial offering of the Benchmade-HK partnership was the HK Pika.
Photo courtesy of Benchmade Benchmade and H&K officially kicked off their collaboration 12 years ago with the 2004 release of the HK Pika.

Over a month ago Benchmade decision makers opted to immediately ramp down production of all Heckler & Koch (HK) knife lines, according to Benchmade Public Relations and Communications Manager Derrick Lau. Benchmade will concentrate efforts on its own brand of sports cutlery and edged tools.

The Oregon City designer and manufacturer notified knife dealers that although not official until Jan. 2, 2017, they would no longer make approximately 17 to 18 different models. Some supply remains, but is quickly dwindling. Dealers are encouraged to contact Benchmade if there are any HK knives they’d like to get before they are all gone.

The tactical design and affordability of HK knives attracted law enforcement officers. The knives include the Entourage, Patrol Axis, Ally, Turmoil, Dispatch, Plan D, Nitrous Blitz, MP5 and Epidemic families.

Benchmade designed and manufactured knives for other companies in the past, such as Harley-Davidson® and Bone Collector. Three years ago the company ended its collaboration with Lone Wolf to rededicate its efforts to Benchmade-branded knives. This is a continuation of that plan, Lau explained, adding it was a case of the company needing to “get our bearings back.”

The licensing agreement specified that Benchmade would design and manufacture the knives, and retain the use of any resulting innovations, while HK would lend its name and branding to the product. Such an arrangement can be a marketing boost for the manufacturer and provide a platform for creative innovation. Since automatics cannot be imported into the U.S., Lau explained, the German-based Heckler & Koch benefitted from the ability to get HK autos into the U.S. market through Benchmade.

The Benchmade-HK arrangement was another in a series of firearms manufacturers working with knife manufacturers to create a mutually beneficial business endeavor. Other examples include Remington and Bear & Son Cutlery, Ruger and CRKT, Smith & Wesson and Schrade and others.

“Our dealers are our most important asset,” Lau said. Dealer feedback indicated that the Benchmade brand is Benchmade’s most attractive selling point. After 30 years in the business, it was simply determined that Benchmade should refocus on its own brand.

Heckler & Koch does not have anything lined up in terms of continuing its knife brand, according to the company’s public relations spokesperson. “We’re a firearms company,” she reiterated, but “we like to offer our fans the accessories we know they want.” She added, “Benchmade did a great job of showing us there was a market for the knives.”

Benchmade would consult with HK officials on some designs they were considering, and HK would choose some for its web shop. Benchmade had the infrastructure in place for wider distribution.

In the future, Benchmade may be open to other collaborations, but for now the company is committed to growing its own line of knives. Some of the Benchmade knives in the works will have features inspired by the HK lines.

Benchmade did not issue an official press release because they wanted their dealers to know first, allow them time to ask questions, and provide any support they might need.

Steve Shackleford, BLADE® editor, contributed to this article

Get ShopBLADES package deal on the two most recent issues of "Knives" along with a digital download of the last 12 years of "Knives," all for only $59.99, a savings of $87.98!

ShopBLADE is offering a not-to-be-missed package for “Knives” readers. You get the 2016 and 2017 paperback issues of “Knives,” a $67.98 value. Plus you get a digital download for the 2004-2015 editions, an $79.99 value. Your cost: $59.99, a savings of $87.98. Hurry!

Click here to check out the “Knives” bundle.

 

 

Save

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement