The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Knife Sharpener Of The Day I

     The first in our Knife Sharpener Of The Day series is the GATCO Edgemate Professional Knife Sharpening System.

     Employing the GATCO exclusive knife clamp/angle guide to help attain a precise, razor-like edge on your blade, the system includes the clamp/angle guide, extra-coarse, coarse, medium and fine sharpening hones, a serrated blade sharpening hone, honing oil and a custom carrying case. The system sharpens most all sizes and types of kitchen, sport and utility cutlery.

     For more information click on http://www.shopblade.com/product/gatco-5-stone-knife-sharpening-system-10005/?r+ssfb261211#Y3300.

BLADE MAGAZINE 2012 AMERICAN-MADE KNIFE OF THE YEAR®

The late great purveyor J.W. Denton said the best-looking knives were shaped like sports cars, and the Microtech Socom Delta—the Blade Magazine 2012 American-Made Knife Of The Year®—is one J.W. would have loved to take around the block for a cut or two.

MICROTECH SOCOM DELTA

•Pattern: Single-action folder

•Blade steel: Powdered CPM S35VN stainless

•Blade length: 3.75”

•Handle material: G10/carbon fiber

•Closed length: 5.25”

•Weight: 4.2 ozs.

•Special stuff: Carbon-fiber handle has a titanium lockbar w/removable insert to hold the blade securely in place; ceramic bearing system provides smooth, fast action

•MSRP: $330

•Available: Now

    The Blade Magazine Knife-Of-The-Year® Awards are voted on each year at the BLADE Show (www.bladeshow.com) by the show’s exhibiting booth holders, plus a panel of five special judges, the latter whose votes count double. The 2013 BLADE Show will be held May 31-June 2, once again at the Cobb Galleria Centre in Atlanta, Georgia.

For the latest knives, knife trends, knifemakers, what knives to buy and where, knife legislation, knifemaking instruction, and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?lid=blss091712

What’s Your Steel I.Q.?

According to BLADE® subscriber surveys, one of the topics subscribers request BLADE cover most is steel—specifically, steel for knife blades. It is not much of a stretch, then, for the latest installment of “BLADE Quiz” to challenge your knowledge of the most popular of blade materials.

    The answers are at the end of the story. Be sharp!

1) Damascus or a damascus type of steel has been traced as far back as: A) the 11th century A.D.; B) second century A.D.; C) 500 B.C.

2) Wootz steel is believed to have originated in: A) Damascus, Syria; B) Indian and/or Sri Lanka; C) Japan.

3) A Swedish steel with 2 percent nickel is known as A) Sandvik 12C27; B) Damasteel damascus; C) 15N20.

4) According to most authorities, for a steel to be stainless, it must contain what percentage range of chromium? A) 11.5 to 12; B) 12.5 to 13; C) 13 to 13.5.

5) The Japanese word for “blade steel” is: A) ha-gane; B) hada; C) ha-machi.

6) The two stainless steels for which Blade Magazine Cutlery Hall-Of-Fame© member Bob Loveless is most famous for introducing to custom knives are: A) BG-42 and 154CM; B) 154CM and ATS-34; C) 440C and Vascowear.

7) A material that is dissolved in another metal in a solid solution or that results when two or more elements combine in a solid solution A) is ductile; B) has been sintered; C) is an alloy.

8) The measure of a steel’s resistance to deformation is its A) wear resistance; B) toughness; C) hardness.

9) Cutlery Hall-Of-Famer Bill Moran introduced damascus steel to modern custom knives at the Knifemakers’ Guild Show held in A) 1972; B) 1973; C) 1974.

10) At the aforementioned Guild Show, Moran’s knives fetched how many dollars per blade inch of damascus? A) $50; B) $100; C) $150.

11) The relative resistance of a steel to breakage, chipping, or cracking under impact or stress is its A) toughness; B) hardness; C) wear resistance.

12) The Crucible Particle Metallurgy steel originally called CPM 440V is now called: A) CPM M4; B) CPM S90V; C) CPM S60V.

13) To harden to the 60 HRC level during heat treating, a steel must have at least what percentage of carbon? A) 0.5; B) 0.75; C) 0.90.

14)  The first CPM steel created exclusively for knife use was: A) CPM S30V; B) CPM 440V; C) CPM 3V.

15) If the first symbol of a steel’s designation is a letter and the second symbol is a number, it is probably a: A) high-carbon steel; B) tool steel; C) high-speed steel.

16) The point at which a steel becomes permanently deformed is its: A) yield strength; B) tensile strength; C) impact strength.

17) Tool steel contains a number of different elements that combine with the steel’s excess carbon to form A) ferrite; B) austenite; C) carbides.

18) In order to cool fast enough, low-alloy steels such as O1 must be quenched in A) oil; B) water; C) a mixture of both A and B.

19) Steel handmade from electrolytic sponge iron and antique wrought iron is called A) tamahagane; B) bulat; C) oroshigane.

20) The carbon steel D.E. Henry claims to have used for knives in the 1940s and that BLADE® field editor Ed Fowler is known best for today is: A) 52100; B) 5160; C) 1084.

 

Answers: 1) C; 2) B; 3) C; 4) B; 5) A; 6) B; 7) C; 8) C; 9) B; 10) B; 11) A; 12) C; 13) A; 14) A; 15) B; 16) A; 17) C; 18) A; 19) C; and 20) A. Scoring: 0-3—You’re rusty. 4-7—You just went from Man of Steel to Man of La Mancha. 8-12—Come back when you can say molybdenum without chipping a tooth. 13-17—You are starting to become abrasion resistant. 18-19—Wayne Goddard just looked over his shoulder at you. 20—Your initials have officially been changed to HRC (hardness Rockwell C).

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?r+ssfb072712 for more information.

SGT. DAKOTA MEYER’S KNIFE

In recognition of his military actions in Afghanistan on behalf of his fellow servicemen and his country that resulted in his receiving the Congressional Medal of Honor, U.S. Army Sgt. Dakota Meyer was presented with a custom knife made by Gene Baskett, a custom AR-15 rifle, and honorary membership in the Knifemakers’ Guild.

    During a special ceremony this past December in Elizabethtown, Kentucky, Baskett, formerly of Elizabethtown and now of Eastview, Kentucky, presented Sgt. Meyer with a Baskett handmade knife, a custom fighter with a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side and “8 September 2009, Kunar Province Afghanistan” on the flip side. The engraving is by Patrick Clark of Clark Jewelers, also of Elizabethtown. Richardson Gunsmithing did the Moly Coating.

    In all, Baskett said he got to spend about three hours with Sgt. Meyer the day of the presentations. “He really loved the knife,” Baskett observed. “He was really appreciative and seemed very humbled by it all.”

    J.J. Akins and Steve Sprowls of Elizabethtown’s Sporter Express gun shop presented Sgt. Meyer with the custom-engraved rifle. The gun is engraved “Rifle presented by the citizens of Hardin County, KY. Sergeant Dakota Meyer, USMC. 8 September 2009. Kunar Province Afghanistan. Congressional Medal of Honor,” and was donated by Sporter Express.

    A member of the Guild’s board of directors, Baskett also presented Sgt. Meyer with a custom Guild honorary membership badge that includes the worlds “Medal of Honor Recipient” and the Marine Corps emblem.

ACTS OF HEROISM

Sgt. Meyer was born and raised in Columbia, Kentucky. He entered the Marine Corps after high school in 2006. On Sept. 8, 2009, Sgt. Meyer, then a corporal, was credited with numerous acts of heroism and saving the lives of several Marines in a battle near the village of Ganjgal in Afghanistan (see sidebar, page ???). As a result, Meyer was awarded the Medal of Honor in a ceremony at the White House on Sept. 15, 2011.

    Sgt. Meyer spoke to a small crowd and the media during the ceremony in Elizabethtown, saying he does not consider himself a hero and that the Medal of Honor and what it represents is much bigger than him. His actions on “the worst day of my life” may have saved several fellow Marines, though he said he could not save four of his close friends in his unit. He wears a bracelet bearing their names.

    The Americans who died in the ambush were: 1st Lt. Michael Johnson, 25, Virginia Beach, Virginia; Staff Sgt. Aaron Kenefick, 30, Roswell, Georgia; Hospital Corpsman Third Class James R. Layton, 22, Riverbank, California; and Gunnery Sergeant Edwin Wayne Johnson Jr., 31, Columbus, Georgia. A fifth soldier, Army Sgt. 1st Class Kenneth W. Westbrook, 41, Shiprock, New Mexico, later died from his wounds.

    Sgt. Meyer received the Medal of Honor in a ceremony at the White House on Sept. 15, 2011. When a White House staffer contacted him to arrange the ceremony, Sgt. Meyer famously asked to “have a beer with the President.” Sgt. Meyer received an invitation to the White House the afternoon before the ceremony (see sidebar, page ???). He also requested that when he was honored, simultaneous services should be held at other applicable locations to honor the memory of his fellow service members who died or were mortally wounded during the ambush and his rescue attempts.

    Sgt. Meyer is the third living recipient of the Medal of Honor since the Vietnam War, and the first living Marine in 38 years to be so honored. In addition to the Medal of Honor, he also received the Purple Heart, Navy Commendation Medal w/Combat V, the Navy Achievement Medal and the Combat Action Ribbon during his years of service from 2006-2010.

MILLION DOLLAR CHALLENGE

Sgt. Meyer uses his fame to raise money to provide college scholarships to the childen of those soldiers who did not survive the war. His goal is to raise $1 million for his “Million Dollar Challenge” (see sidebar, page ???). During the presentation ceremony, Sporter Express presented a check for $750 toward that goal.—BY MIKE CARTER

For more information on the Million Dollar Challenge, visit www.dakotameyer.com. For more on Gene Baskett knives, contact Gene Baskett, Dept. BL12, 427 Sutzer Ck. Rd., Eastview, KY 42732 270-862-5019 www.baskettknives.com.

To stay abreast of the latest in knives and knife information, subscribe to BLADE® at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101212

Keeping Up With Dakota Meyer

It is not often a living U.S. Marine receives the Congressional Medal of Honor, and Sgt. Dakota Meyer is the first one to do so in 38 years. Neither is he one to rest on his laurels.

    For instance, he has partnered with the Marine Corps Scholarship Foundation (MCSF) to raise money so the children of Marines can attend college. Sgt. Meyer said he realizes the importance of education and believes in the MCSF motto, “Honoring Marines by Educating Their Children.” The Dakota Meyer Scholarship Initiative was established and Sgt. Meyer committed to personally raising a million dollars to fund the effort. In fact, during the MCSF’s 50th anniversary celebration this past spring, it was announced that he had successfully reached his goal of raising a million dollars. The Challenge to America to match the million dollars Sgt. Meyer raised is ongoing. To learn more about it and to make a donation visit www.dakotameyer.com

    He indicated he was honored President Obama accepted his invitation to have a beer the afternoon before the Medal of Honor ceremony. (As a side note, Sgt. Meyer said the White House brews its own beer, a honey ale, which he said both he and the president enjoyed.) He added he appreciated the opportunity to speak with and ask advice from the president. The president emphasized the importance of education, a priority Sgt. Meyer shares. In fact, Sgt. Meyer said he hopes to continue his education when his travel schedule slows down.

    Meanwhile, he spends much of his time on the road, traveling all over America to share the story of his fallen brothers. He also advocates for veterans and has recently partnered with the U.S. Chamber of Commerce and Toyota on the Hiring Our Heroes campaign, which provides jobs fairs for veterans nationwide, as well as training veterans to successfully make the transition from military to civilian employment. At press time, Sgt. Meyer’s book Into the Fire was slated to be published this September.

Above and Beyond The Call

 According to Dakota Meyer’s citation for the Medal of Honor, he was recognized, “For conspicuous gallantry and intrepidity at the repeated risk of his life above and beyond the call of duty as a member of Marine Embedded Training Team 2-8, Regional Corps Advisory Command 3-7, in Kunar Province, Afghanistan, on 8 September 2009.

    “When the forward element of his combat team began to be hit by intense fire from roughly 50 Taliban insurgents dug in and concealed on the slopes above Ganjgal village, [then] Corporal Meyer mounted a gun-truck, enlisted a fellow Marine to drive, and raced to attack the ambushers and aid the trapped Marines and Afghan soldiers. During a six-hour firefight, Corporal Meyer single-handedly turned the tide of the battle, saved 36 Marines and soldiers and recovered the bodies of his fallen brothers.

    “Four separate times he fought the kilometer up into the heart of a deadly U-shaped ambush. During the fight he killed at least eight Taliban, personally evacuated 12 friendly wounded, and provided cover for another 24 Marines and soldiers to escape likely death at the hands of a numerically superior and determined foe.

    “On his first foray his lone vehicle drew machine gun, mortar, rocket grenade and small arms fire while he rescued five wounded soldiers. His second attack disrupted the enemy’s ambush and he evacuated four more wounded Marines. Switching to another gun-truck because his was too damaged, they again sped in for a third time, and as turret gunner he killed several Taliban attackers at point blank range and suppressed enemy fire so 24 Marines and soldiers could break out.

    “Despite being wounded, he made a fourth attack with three others to search for missing team members. Nearly surrounded and under heavy fire, he dismounted the vehicle and searched house-to-house to recover the bodies of his fallen team members. By his extraordinary heroism, presence of mind amidst chaos and death, and unselfish devotion to his comrades in the face of great danger, Corporal Meyer reflected great credit upon himself and upheld the highest traditions of the Marine Corps and the United States Naval Service.”

 

TOP PHOTO AND SECOND PHOTO FROM TOP

Congressional Medal-of-Honor recipient Sgt. Dakota L. Meyer recently was presented with a Gene Baskett handmade knife. The custom fighter has a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side. The engraving is by Patrick Clark. Richardson Gunsmithing did the Moly Coat. (photo of Sgt. Meyer courtesy of the United States Marine Corps; knife photo by Mike Carter)

 

Knife For Veteran’s Day

On Veteran’s Day (11/11/13), U.S. Elite Gear, in collaboration with Rustick Knives, plans to introduce a limited-edition (you guessed it, only 11 knives will be released initially) fixed-blade “Kraken” model for sale through U.S. Elite’s website, www.US-EliteGear.com. The Kraken features a 6-inch, recurved, tan-Cerakote™-treated blade of 1/4-inch-thick 80CrV2 tool steel, black G-10 handle scales and a “coyote”-brown Kydex® sheath with a Blade-Tech clip for attachment to gear.Kraken-Knife-main

Designed by SGM Jack Stottlemire (retired), founder of Rustick Knives, and U.S. Elite’s Jim Erwin, former Army Ranger and 1st SFOD-D operator, who the knife is inspired after, the knife is manufactured in the Rustick Knives production facility in Ft. Bragg, North Carolina.

“Having served for 26 years as a Marine, paratrooper and Special Operations soldier, with 12 combat tours, I know firsthand that a soldier needs a good strong knife that is not going to fail,” stated Stottlemire. “Just about every soldier on the battlefield carries a fixed-blade knife on his kit, it just feels right, and is one of those essential items that we all must have.

The 11 limited-edition Kraken knives will be available for purchase for $350 each through www.US-EliteGear.com on November 11th, Veterans Day.  After those are exhausted, un-serialized knives will be available for $299 each.

For other tactical fixed blades, click here.

 

 

ABS Announces 1st School Outside USA

An example of knives made in Belgium is the Hurak Fighter by new ABS journeyman smith Samuel Lurquin. (SharpByCoop.com photo)
The ABS will open a new bladesmithing school in Belgium in October. The Hurak is by Belgium’s Samuel Lurquin, who earned his ABS journeyman smith stamp at the 2013 BLADE Show. (SharpByCoop.com photo)

The American Bladesmith Society (ABS) will offer its first-ever bladesmithing school outside the USA beginning in October.

Operated in partnership with The Forge at Ostiches, Belgium, the school’s first class will be “Introduction to Bladesmithing.” Limited to seven students, the class will have as its primary instructor ABS master smith Jean-Paul Thevenot of Dijon, France. Belgium’s Dirk Bourguignon and Frederic Taquet, both ABS bladesmiths, will assist.

The school site is in a beautiful village south of Brussels. Accommodations are nearby within two to three miles. English will be spoken.

The first ABS school of bladesmithing outside the USA was approved in a vote of the ABS Board of Directors during the ABS annual meeting at the 2013 BLADE Show & Living Ready Expo (www.bladeshow.com) May 31-June 2.

The Belgian facility is the fourth ABS school of bladesmithing. The others are the original—the Bill Moran School of Bladesmithing in Old Washington, Arkansas—and the Haywood Community College  in Clyde, North Carolina, and the New England School of Metalwork in Auburn, Maine.

“We now have members in 18 countries,” noted ABS Webmaster Dan Cassidy, “and it is not unusual for my wife Sally and I to communicate with our ABS members around the world in Spanish, Portugese and French on a routine basis. The Internet makes all of this possible today.”

Cassidy credited ABS master smith and new ABS president Joe Keeslar with making the new school possible. Winner of the 2013 BLADE Magazine Industry Achievement Award, Keeslar has been a groundbreaker in bringing modern bladesmithing to both France and Belgium. “Joe was the one who made all the arrangements for the new school,” Cassidy noted, “and it was done over the course of more than a year.”

For information on dates, tuition and accommodations for the new school, contact [email protected], [email protected] or [email protected].

For the latest in knife news, stay tuned to www.blademag.com.

A Few Great Everyday Carry Knives

Best everyday carry knives

No. 1 for knife enthusiast Nick Morgan is the Chris Reeve Sebenza. “The tolerances are so much better on Chris Reeve knives than any other production knives, and you’ll find just about perfect fit and finish on every model. I love the blade and handle shapes, and the plain, simple looks are beautiful,” he said.

The Spyderco Sage2 is second on Morgan’s list. “I love the deep-carry wire clip—for my money the best clip in the industry,” he stated. “The profile of the titanium Sage2 is thinner than the carbon fiber Sage1, so using and carrying it is noticeably nicer.”

Morgan said the Benchmade 940 is a blast to play with due to the AXIS lock. “It’s super easy to open and close, and it’s fast!” he emphasized. “The reverse tanto blade shape is my favorite. For cutting, whittling and stabbing, it’s strong, sharp and great looking. It’s the best knife to sit in front of the TV and flip open/closed hundreds of times.”

Next on Morgan’s list is the DPx HEST 2.0, “a knife that can survive heavy-duty use day after day. I love the functional blade shape and, at 3.25 inches, it’s big enough for 99 percent of my cutting tasks while not being too big that it scares people when I use it in public. It locks up solidly like the Sebenza and I love the extra features—bottle opener, wire stripper and glass breaker/skull crusher, the latter which is really nicely executed. My favorite feature is the bayonet clip—it buries so deep in the pocket that nobody suspects I’ve got a knife on me.”

Last on Morgan’s list is what he terms the “best-bang-for-the-buck” knife: the Large Buck Vantage Pro. “It has a great blade and handle shape, I love the flipper, it has top quality blade steel [CPM S30V] and handle material, an excellent deep-carry bayonet clip, it’s USA made and has a nice, slim profile. Best of all,” he added, “it’s less than half the cost of every other knife on my list.”

For more EDC knives, check out this selection at ShopBlade.com.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement