Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

A Knife for Sgt. Dakota Meyer I

0

    In recognition of his military actions in Afghanistan on behalf of his fellow servicemen and his country that resulted in his receiving the Congressional Medal of Honor, U.S. Army Sgt. Dakota Meyer was presented with a custom knife made by Gene Baskett, a custom AR-15 rifle, and honorary membership in the Knifemakers’ Guild.

    During a special ceremony this past December in Elizabethtown, Kentucky, Baskett, formerly of Elizabethtown and now of Eastview, Kentucky, presented Sgt. Meyer with a Baskett handmade knife, a custom fighter with a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side and “8 September 2009, Kunar Province Afghanistan” on the flip side. The engraving is by Patrick Clark of Clark Jewelers, also of Elizabethtown. Richardson Gunsmithing did the Moly Coating.

    In all, Baskett said he got to spend about three hours with Sgt. Meyer the day of the presentations. “He really loved the knife,” Baskett observed. “He was really appreciative and seemed very humbled by it all.”

    J.J. Akins and Steve Sprowls of Elizabethtown’s Sporter Express gun shop presented Sgt. Meyer with the custom-engraved rifle. The gun is engraved “Rifle presented by the citizens of Hardin County, KY. Sergeant Dakota Meyer, USMC. 8 September 2009. Kunar Province Afghanistan. Congressional Medal of Honor,” and was donated by Sporter Express.

    A member of the Guild’s board of directors, Baskett also presented Sgt. Meyer with a custom Guild honorary membership badge that includes the worlds “Medal of Honor Recipient” and the Marine Corps emblem.

ACTS OF HEROISM

Sgt. Meyer was born and raised in Columbia, Kentucky. He entered the Marine Corps after high school in 2006. On Sept. 8, 2009, Sgt. Meyer, then a corporal, was credited with numerous acts of heroism and saving the lives of several Marines in a battle near the village of Ganjgal in Afghanistan (see sidebar, page ???). As a result, Meyer was awarded the Medal of Honor in a ceremony at the White House on Sept. 15, 2011.

    Sgt. Meyer spoke to a small crowd and the media during the ceremony in Elizabethtown, saying he does not consider himself a hero and that the Medal of Honor and what it represents is much bigger than him. His actions on “the worst day of my life” may have saved several fellow Marines, though he said he could not save four of his close friends in his unit. He wears a bracelet bearing their names.

    The Americans who died in the ambush were: 1st Lt. Michael Johnson, 25, Virginia Beach, Virginia; Staff Sgt. Aaron Kenefick, 30, Roswell, Georgia; Hospital Corpsman Third Class James R. Layton, 22, Riverbank, California; and Gunnery Sergeant Edwin Wayne Johnson Jr., 31, Columbus, Georgia. A fifth soldier, Army Sgt. 1st Class Kenneth W. Westbrook, 41, Shiprock, New Mexico, later died from his wounds.

    Sgt. Meyer received the Medal of Honor in a ceremony at the White House on Sept. 15, 2011. When a White House staffer contacted him to arrange the ceremony, Sgt. Meyer famously asked to “have a beer with the President.” Sgt. Meyer received an invitation to the White House the afternoon before the ceremony (see sidebar, page ???). He also requested that when he was honored, simultaneous services should be held at other applicable locations to honor the memory of his fellow service members who died or were mortally wounded during the ambush and his rescue attempts.

    Sgt. Meyer is the third living recipient of the Medal of Honor since the Vietnam War, and the first living Marine in 38 years to be so honored. In addition to the Medal of Honor, he also received the Purple Heart, Navy Commendation Medal w/Combat V, the Navy Achievement Medal and the Combat Action Ribbon during his years of service from 2006-2010.

MILLION DOLLAR CHALLENGE

Sgt. Meyer uses his fame to raise money to provide college scholarships to the childen of those soldiers who did not survive the war. His goal is to raise $1 million for his “Million Dollar Challenge” (see sidebar, page ???). During the presentation ceremony, Sporter Express presented a check for $750 toward that goal.—BY MIKE CARTER

For more information on the Million Dollar Challenge, visit www.dakotameyer.com. For more on Gene Baskett knives, contact Gene Baskett, Dept. BL12, 427 Sutzer Ck. Rd., Eastview, KY 42732 270-862-5019 www.baskettknives.com.

To stay abreast of the latest in knives and knife information, subscribe to BLADE® at http://www.shopblade.com/blade-magazine-one-year-subscription-us?lid=SSfbbl101212

Keeping Up With Dakota Meyer

It is not often a living U.S. Marine receives the Congressional Medal of Honor, and Sgt. Dakota Meyer is the first one to do so in 38 years. Neither is he one to rest on his laurels.

    For instance, he has partnered with the Marine Corps Scholarship Foundation (MCSF) to raise money so the children of Marines can attend college. Sgt. Meyer said he realizes the importance of education and believes in the MCSF motto, “Honoring Marines by Educating Their Children.” The Dakota Meyer Scholarship Initiative was established and Sgt. Meyer committed to personally raising a million dollars to fund the effort. In fact, during the MCSF’s 50th anniversary celebration this past spring, it was announced that he had successfully reached his goal of raising a million dollars. The Challenge to America to match the million dollars Sgt. Meyer raised is ongoing. To learn more about it and to make a donation visit www.dakotameyer.com

    He indicated he was honored President Obama accepted his invitation to have a beer the afternoon before the Medal of Honor ceremony. (As a side note, Sgt. Meyer said the White House brews its own beer, a honey ale, which he said both he and the president enjoyed.) He added he appreciated the opportunity to speak with and ask advice from the president. The president emphasized the importance of education, a priority Sgt. Meyer shares. In fact, Sgt. Meyer said he hopes to continue his education when his travel schedule slows down.

    Meanwhile, he spends much of his time on the road, traveling all over America to share the story of his fallen brothers. He also advocates for veterans and has recently partnered with the U.S. Chamber of Commerce and Toyota on the Hiring Our Heroes campaign, which provides jobs fairs for veterans nationwide, as well as training veterans to successfully make the transition from military to civilian employment. At press time, Sgt. Meyer’s book Into the Fire was slated to be published this September.

Above and Beyond The Call

 According to Dakota Meyer’s citation for the Medal of Honor, he was recognized, “For conspicuous gallantry and intrepidity at the repeated risk of his life above and beyond the call of duty as a member of Marine Embedded Training Team 2-8, Regional Corps Advisory Command 3-7, in Kunar Province, Afghanistan, on 8 September 2009.

    “When the forward element of his combat team began to be hit by intense fire from roughly 50 Taliban insurgents dug in and concealed on the slopes above Ganjgal village, [then] Corporal Meyer mounted a gun-truck, enlisted a fellow Marine to drive, and raced to attack the ambushers and aid the trapped Marines and Afghan soldiers. During a six-hour firefight, Corporal Meyer single-handedly turned the tide of the battle, saved 36 Marines and soldiers and recovered the bodies of his fallen brothers.

    “Four separate times he fought the kilometer up into the heart of a deadly U-shaped ambush. During the fight he killed at least eight Taliban, personally evacuated 12 friendly wounded, and provided cover for another 24 Marines and soldiers to escape likely death at the hands of a numerically superior and determined foe.

    “On his first foray his lone vehicle drew machine gun, mortar, rocket grenade and small arms fire while he rescued five wounded soldiers. His second attack disrupted the enemy’s ambush and he evacuated four more wounded Marines. Switching to another gun-truck because his was too damaged, they again sped in for a third time, and as turret gunner he killed several Taliban attackers at point blank range and suppressed enemy fire so 24 Marines and soldiers could break out.

    “Despite being wounded, he made a fourth attack with three others to search for missing team members. Nearly surrounded and under heavy fire, he dismounted the vehicle and searched house-to-house to recover the bodies of his fallen team members. By his extraordinary heroism, presence of mind amidst chaos and death, and unselfish devotion to his comrades in the face of great danger, Corporal Meyer reflected great credit upon himself and upheld the highest traditions of the Marine Corps and the United States Naval Service.”

 

TOP PHOTO AND SECOND PHOTO FROM TOP

Congressional Medal-of-Honor recipient Sgt. Dakota L. Meyer recently was presented with a Gene Baskett handmade knife. The custom fighter has a black Moly-Coated CPM-154 stainless blade and a black linen Micarta® handle. The knife is engraved “MOH, Sgt. Dakota Meyer, USMC” on the mark side. The engraving is by Patrick Clark. Richardson Gunsmithing did the Moly Coat. (photo of Sgt. Meyer courtesy of the United States Marine Corps; knife photo by Mike Carter)

 

White-Hot Knife Websites

Some websites offer exclusives on custom knives. True North Knives (TNK) has the exclusive on Kirby Lambert’s “Scorpios” (above). Blade steel: CPM-S35VN stainless. Blade length: 3 1/8 inches. Handle: Ironwood burl. Bolster/guard: Lightning strike carbon fiber. TNK’s list price: $675. (TNK photo) For more information about this knife and/or more like it, click on http://www.truenorthknives.com/vcom/index.php

WHITE-HOT KNIFE WEBSITES

The hottest cutlery websites offer the best in knives, selection and service

By Mike Haskew

 

The Internet crackles with items to buy, sell and trade, and the number of websites serving the knife community has steadily grown in recent years. Browsing online does have its advantages with a broad selection just a click away.

Knife specs and prices can be easily compared, while information on custom makers and manufacturers is readily available. However, before buying online, it pays to be informed as to service, responsiveness, quality of the items once received, and the degree to which an Internet source is prepared to stand behind the knife it sells and ships.

“It’s important to remember,” advised BLADE® field editor Dexter Ewing, “that the Internet in general is very dynamic, and folks that sell knives on [it] have the advantage of harnessing the power of cyberspace and using it to their advantage. If they get a new knife in from, say, Benchmade or Spyderco, they can almost immediately have the picture of the knife up as well as the specs, pricing and a ‘virtual shopping cart’ feature.”

Those considering the online purchase of a custom or factory knife may want to visit some of the best sites around to find out for themselves just what may be in store.

From the custom angle, three story sources said Neil Ostroff and his truenorthknives.com is a winner. “This Canadian purveyor is a real success story and an inspiration for me,” commented collector Lorien Arnold. “There is a constant movement of knives through the store, and there are quality photos accompanying each knife. Pricing is very consistent, and although my interest isn’t primarily in folding knives, visiting this site regularly keeps me informed on what is hot. True North Knives really has its finger on the pulse of what is hot in cutlery.”

True North Knives is also high on the list of collector Mike Searson. Others topping his list are Bladeart.com, EDCknives.com, nordicknives.com, bluelinegear.com and schmuckatellico.com. “I primarily collect custom knives, and these sites often have photos and stats of the latest knives more up to date than even the makers’ own sites,” he commented. “Pricing is pretty reasonable, and all of these dealers have gotten back to me usually within the same day.

“For production knives,” Searson continued, “I usually go to the factory websites as they tend to keep those more up to date than the custom makers do [their sites], and these include emersonknives.com, spyderco.com, chrisreeve.com, microtech.com and others. They all offer an equal level of customer service and response time.

“In today’s market, everyone has to be competitive. The bigger production houses can take a day or two to get back in touch with you, but that’s understandable with their volume or if you are looking for a discontinued item that may be in stock. Usually, I will buy any needed supplies from these folks when placing a knife order.”

A collector of high-end custom tactical knives, Tarek Mirshak likes arizonacustomknives.com, steeladdictionknives.com and ebosshoss.com. “They have a great variety of custom tactical knives, updates on a regular basis, great communication,” he said. Of arizonacustomknives.com he added, “It’s a ‘real-time site,’ so once an item is sold, it’s automatically marked as sold. Pricing is reasonable and shipping is prompt.

“If I’m looking for a very special piece, the place to look is ebosshoss.com. Jon Ukman has a knack of having hard-to-find pieces and most people’s ‘holy grails.’ His prices are sometimes on the high side, but considering the rarity of the pieces he has, the prices are not unreasonable. His communication is great and shipping is always prompt.” At steeladdictionknives.com, Mirshak says to expect more of the same, a real-time site with regular updates and outstanding customer satisfaction.

Ewing is a fan of truenorthknives.com, knifeart.com and knifecenter.com. In addition to knives, the sites offer sharpeners from angle-guide kits to bench stones, files, storage cases, storage bags, zippered pouches, lubes and sheaths. All three keep their content updated with timely postings of new images and information.

“Their site is their storefront, and they have to keep posting new knives on a timely basis because that’s what helps generate sales,” Dexter related. “To some degree these sites offer exclusives with custom knifemakers of a special design that the site and the maker agree on. They usually are models that are not offered in the maker’s regular lineup and offer a point of attraction for these websites to be the only source for a knife that only can be purchased from that one website.

“The selection of these sites is enormous,” Ewing added. “They all cover the range from custom and production slip joints, fixed-blade hunters, gent’s knives, full-blown tacticals, and some investment-grade collector pieces. They also stock a good variety of knife care supplies and equipment. All three sell flashlights, too, something that apparently a lot of knife guys are also into, including me! So, it’s great to see a wide variety of cutlery and related products for sale on just one website.”

Arnold said he credits his online experience with his “discovering” custom knives on Bladeforums.com. “It’s a place which provides social interaction with people whom I’ve befriended there over the years. I also frequent a number of custom knife purveyors’ websites, and I am always looking for new work by my favorite makers or newly available work from makers who unfortunately may no longer be in this world.”

Arnold indicated he enjoys browsing robertsoncustomcutlery.com. “There are rarely any exceptional deals to be found, but if you are looking for a knife which will either maintain its value or go up in value, this is a good place to look, and a great place for solid, informed advice. The store’s owner [Les Robertson] is very communicative,” he added.

 

Materials, Sheaths and More

Arnold said he has made a few knives himself and purchased most of the materials needed from alphaknifesupply.com. He indicated he appreciates the site’s wide selection, and researching its materials costs has provided insights on how finished knives are priced. Among his other favorite sites are beautifulblades.com and nordicknives.com.

“This purveyor always has very interesting knives of all varieties available and somehow seems to get high-end knives of a level rarely seen elsewhere,” he said of the Solvang, California-based Nordic Knives owned by Dave and Grace Harvey. “The photos are consistent and easy on the eyes and is a very simple site to navigate as well.”

At beautifulblades.com, a specialty is custom sheaths, and the site features custom fixed blades and art knives, some of which are the work of Magnus Axelson. Arnold said he recently bought an Axelson knife from beautifulblades.com and was pleased with the packaging and turnaround time.

While the Internet presents challenges all its own, and nothing quite takes the place of holding a knife and getting a feel for its balance and a solid look at the craftsmanship, online shopping opens a whole new arena for knife buyers. As always, doing the necessary homework and understanding pricing, terms of delivery and return policies help make the most of an online purchase from a reputable and responsible source.

 

 

For more on the latest knives, knife websites, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb160112#BL1SU

 

Knife Of The Day XXV: Jody Muller’s “King Arthur”

As Mel Brooks says in The History Of The World, Part I, “It’s good to be the king.” And Jody Muller’s “King Arthur” dress locking folder, the 25th installment in our “Knife Of The Day” series, resembles Brooks’s remark.

    Boasting damascus forged by Jody, a handle of carved ancient walrus ivory, and 24k-gold and copper inlays, the knife gives Camelot a whole new dose of cool.

    For more information on the knife, click on www.mullerforge.com.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us for more information.

Knife Of The Day XIII—1st One for 2012!

     Our first Knife Of The Day for 2012 is the Benchmade Presidio. Sporting a 3.42-inch drop-point blade of 154CM stainless steel and an AXIS locking mechanism, the Presidio is a Mel Pardue design with a black anodized, machined 6061 T-6 aluminum handle, 420J stainless steel liners, and a reversible tip-up pocket clip. The handle features a multi-directional positive grip. Blade thickness: .125 inch. Weight: 5.62 ounces. Closed length: 4.87 inches. MSRP: $200.

     For more information contact Benchmade, attn: Alicia Hunt, 300 Beavercreek Rd., Oregon City, OR 97045 503-655-6004 www.benchmade.com.

   For the latest knives, knife trends, knifemakers and more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscription-us/?r+ssfb040112#BL1SU

Art Knife vs. Cutting Tool Debate

SOG_HT011L

The art knife versus cutting tool debate of whether knives are, or should be, works of art or cutting tools has always intrigued me. There are those who are a bit “put off” by art knives because they prefer utilitarian knives made to be used and employed when needed. That is certainly understandable, and thank goodness there are companies and makers out there fashioning good, sturdy, sharp serviceable fixed blades and folders.

But the notion that art knives are a modern phenomenon ignores the countless officers of world armies who historically carried dress daggers, kings and queens of countries gifted with jewel-encrusted, gold-inlaid, sculpted and carved swords and other edged weaponry, and the “average joe” who saved his pennies in the 1960s and ’70s to buy a Buster Warenski, Bill Moran, Jim Schmidt or even Bob Loveless (many considered him a maker of art knives on occasion) art knife. newton knife

And one other argument I’d make is this—the debate doesn’t need to be debated at all. There is plenty of room in the knife industry for both art knives and more utilitarian hunters, soldiers’ knives, blue-collar fixed blades and folders, and many more. Look at it this way, just because one guy prefers his three-blade stockman for ranch work doesn’t mean he shouldn’t welcome the collector of high-end art knives into the industry and market with open arms. Collectors who appreciate that artistic nature and handcraft of knives help drive the industry forward and ultimately expand its offerings. And that’s just good for knives and knife enthusiasts in general!

To see and read about as many well-crafted custom knives, both utilitarian and artistic, as humanly possible, the Knives 2014 book is a must-have for your library. To keep updated on factory, custom and semi-production knives 13 times a year, subscribe to BLADE now!

Knife Of The Day

Here’s a new feature for ya’: the Knife Of The Day. The first one in this new feature is Bill Kirkes’ utility hunter in a handle of amber stag and 4.5-inch blade of 5160 carbon steel. The fittings are stainless. Overall length: 9 inches. Mr. Kirkes also made the inlaid sheath.

For more information contact Mr. Kirkes at 235 Oaklawn Circle, Little Rock, AR 72206 501-551-0135. (No website or e-mail info available.)

To see more great knives like this one and others, click on http://www.shopblade.com/category/magazine-issues to subscribe to BLADE®.

Navy SEAL’s Super Bolo!

Nearly 20 years later and with my original bolo in disrepair, I thought it time to replace it with an updated and more technologically sophisticated design. My goal was to find a knifemaker from my home state of Kentucky who would be capable and willing to collaborate on the project. It was not long before several members of the Knifemakers’ Guild recommended Gene Baskett. A Guild member since 1981, Gene has proved to be one of Kentucky’s finest custom knifemakers and has earned the respect of his peers for the quality work he produces.

He and I based the knife’s design on the old bolo I had used when I served in the SEALs. Our decision was to go with CPM-154 stainless steel, and Gene made several blade adjustments. We experimented with a rubber handle made from extremely durable horse matting material—a perfect Bluegrass State touch, and a substance also favored by a number of makers and contestants in the cutting competitions. The resulting grip is firm yet shock absorbing. The handle can also be securely grasped when wet. My concerns were simple: durability and performance. I wanted a knife that would withstand a heavy amount of punishment and still perform well.

Both Gene and I agree that the knife has exceeded our expectations. Its cutting ability is just plain scary. Without honing the original edge applied by Gene, I put the knife to the test. He already had whacked through 1-inch saplings, and still the blade was gliding through blades of grass and straw. My test consisted of saplings, 1-inch tree branches and wild grape vines. All were easily severed with one clean hit.

After 20-to-30 strikes on branches and vines, I moved on to a grass mat wrap 4 inches in diameter. The grass mat was wrapped tightly around a 1-inch piece of dried bamboo. One diagonal strike went completely through. I finished the test with a piece of quarter-inch tanned cowhide. With only slight pressure, the bolo sank through the hide from tip to handle. Drawing the blade out and away left a clean, effortless cut through 8 inches of hide. The blade was still quite sharp afterward.—BY STEVE WATKINS, retired Navy SEAL

For the complete story on the author’s super bolo, you can get the digital version of the December BLADE® by clicking on http://www.shopblade.com/blade-dec-2012-digital-issue?lid=SSfbbl101612

PICTURE CAPTIONS, FROM TOP

TOP: At top is the author’s old bolo and leather sheath and below it is Gene Baskett’s Super Bolo and Kydex® sheath. (photo courtesy of Steve Watkins)

MIDDLE: One of the instructors near the author’s duty station in the Philippines circa 1990 splits wood with the author’s old bolo. (photo courtesy of Steve Watkins)

BOTTOM: The author (right) and his friend, Brad O’Neill, on patrol circa 1990. The author is shown holding an M-60 (7.62mm) and his friend an M-16 with an M-203 (a 40mm grenade launcher). (photo courtesy of Steve Watkins)

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement