Judge Throws Out Motions in NYC Lawsuit

 

In a serious blow to the attempts by New York City and NYC District Attorney Cyrus Vance, Jr. to derail Knife Rights’ federal civil rights lawsuit against them, U.S. District Judge Barbara S. Jones on September 10 denied their motions for judgment on the pleadings and to dismiss the case.

    The ruling comes on the heels of a decision by Federal Magistrate Judge Ronald Ellis on September 7 allowing victimized NYC retailer Native Leather to join the case as a plaintiff.
 
     Download Judge Jones’ opinion and order here: http://bit.ly/ODNGi4   
 
     Together, Knife Rights said these rulings affirm that its lawsuit is valid on its face and will proceed to trial.
 
     “Despite their attempts to make this case go away, NYC and DA Vance will now be held fully accountable in federal court by Knife Rights for their disgraceful attempts to demonize the most widely-owned pocketknives in America as contraband, and to intimidate honest knife retailers into making six-figure forced ‘contributions’ to the City, under threat of criminal penalty, in order to avoid prosecution,” said Knife Rights Chairman Doug Ritter.
 
     The case seeks a judicial determination that the New York state laws regarding “switchblades” and “gravity knives” are unconstitutionally vague as applied to common pocketknives with a bias towards closure, including one-hand opening and assisted-opening folding knives. An example of a one-hand opener is Sal Manaro’s custom folder pictured above.
 
     “The dismissal of these motions vindicates our position that there are real constitutional issues involved,” Ritter noted. “The City cannot simply expand the state law to persecute knife owners and retailers to suit their own ends.
 
     “Suing the largest city in the U.S. is not something to be done lightly, but it is essential to our freedoms that New York not be allowed to trample on our rights, and Knife Rights has stepped up to the plate to defend freedom. Perhaps now DA Vance will recognize that this lawsuit is not going away and come to his senses instead of continuing to waste taxpayer resources victimizing law-abiding citizens who simply possess a practical tool (a common pocketknife), and the honest retailers who sell these tools.”
 

 

For the latest knives, knife trends, knifemakers, what knives to buy and where, knife legislation, knifemaking instruction, and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?lid=blss091112

New BLADE Hits Newsstands TODAY!

What does it take to be a full-time knifemaker? Was BLADE Magazine Cutlery Hall-Of-Fame© member Michael Walker’s LinerLockâ„¢ an innovation or a redo? Do you know how to make a damascus plug weld? These questions and more are answered in the latest issue of BLADE®, debuting on newsstands TODAY!

Get the new BLADE, on newsstands now!
The new BLADE is on newsstands now!

Custom knives have a mystique and following all their own, and the hottest makers of same enjoy a cult-like status with their most ardent fans. However, what’s it really like to be a full-time custom knifemaker? Read part one of veteran maker Shane Sibert’s story “26 Hurdles To Making Knives” and you will get a healthy dose of reality. In other words, if you’re thinking of becoming a knifemaker, Shane’s article is must reading.

Michael Walker invented the LinerLock in 1981, but it wasn’t until 1987 that other makers started producing folders with the ingenious locking mechanism. Since then the mechanism has exploded in popularity, and today is probably the most popular lock on contemporary folders. Along the way, Walker had to fight to maintain his claim of being the inventor of the LinerLock. He tells you all about it and other things in “LinerLock: Innovation or Redo?”

Also: Check out the first-ever knives offered by Maxpedition, including this issue’s cover knife, the Ferox. Learn all about some of the best knives you may not know of and also what is behind the re-emergence of blade fullers, also known incorrectly as blood grooves, on today’s knives.

Knifemaker Stanley Fujisaka passed away on the last day of 2013 but not before he left an indelible impression on scores of knifemakers, knife enthusiasts and, of course, his loving family and friends. Dan Delavan shares his memories of the endearing Hawaiian maker and person in “Fujisaka: A Great Mentor Remembered.”

Stay tuned to www.blademag.com for the latest in knives, knife trends and much more.

Hank Rummell: He Will Be Missed

Long-time custom knife purveyor Herman “Hank” Rummell of New York Custom Knives (www.newyorkcustomknives.com), who was killed Jan. 29 in a tragic accident when he was struck by a car while walking his dog, is remembered fondly by those who knew him.

    “I considered Hank like a brother and our relationship grew over the years from customer/client to one of great friendship,” noted Irv Lehman, one of Hank’s many long-time customers. “He will be missed greatly and the knife shows will never be the same.”

    “Hank was at almost every single knife show I attended,  going all the way back to 1991,” knifemaker Phil Booth recalled. “I used to hang around to look at the quality knives he kept on his table until I was brave enough to ask to start picking them up and looking closely. Through the years, I showed him my most recent knives to see if they were getting better, and he would critique them and give me hints on how to better my work. Then the day came when he bought a Minnow [one of Booth’s knife models] and set it on his table! He sold that knife and many more. Had it not been for Hank’s watchful eye,  my knifemaking would not be where it is today.”

    According to Lehman, in lieu of flowers, Mrs. Helen Rummell requests that you make a donation to honor Hank to an animal rescue in your local area. “Helen and Hank were very much dedicated to their dogs and Hank lost his life in keeping his dog safe,” Lehman observed. “That was the ultimate sacrifice for the love of his dog and, knowing Hank, he would do it again.”


World’s Hottest Knives Highlight New BLADE®!

The world’s hottest knives, top everyday carry knives under $75 and knives in a rainbow of handle colors highlight the new BLADE®, on newsstands now!

Such internationally renowned knifemakers as Lee Williams, Allen Elishewitz, Jens Anso, Bob Terzuola, Kirby Lambert, Tom Mayo, RJ Martin and Peter Rassenti—whose “Large Nirvana” folder graces the cover—and many more, along with their knives most in demand, are among those identified among the world’s hottest on pages 20-27 of the new issue.

What knife are you carrying today? If you’re looking for an everyday carry knife under $75, James Morgan Ayres tests four of the latest models on pages 30-35. See if one of these EDCs fits your hand and pocketbook.

Everything in color seems to be a common theme for many of today’s hottest products, and factory knives are joining the party. Check out the latest members of the cutlery color coalition on pages 42-45.

In case you haven’t noticed, the schools’ draconian zero tolerance policies concerning knife carry are unduly oppressive and penal—and are ruining the lives of many innocent kids. Get the latest on this national disgrace on pages 12-16.

Bushcraft knives are today’s equivalent of the survival knife and it’s nice to know what to look for in one and how to use it. Get primed on the Scandinavian grind and more on pages 82-85.

The late Bob Lum is credited with making the first American tanto and Cold Steel further popularized the pattern with its mass production of the Cold Steel Tanto, but did you know the blade pattern itself dates back to the 4th century? Get the complete scoop on pages 74-78.

Also in this issue: an update on the federal ivory ban, a test of two tomahawks by retired 5th Special Forces MSG Kim Breed, a profile of knifemaking supplier Tru-Grit, the continuing saga of Plaza Cutlery and its 40th anniversary as a knife retailer and much more, all in the October BLADE.

 

Check out the world's hottest custom knives in the new BLADE®.
Custom knives that sizzle most are in the new BLADE®, on newsstands now!

Website Details Knife Laws By State

0

The American Knife and Tool Institute has launched a revised version of its website, www.AKTI.org, with improved features for members and accurate information about the laws that impact knife businesses and owners in every state.

“Making state knife laws available online to our members and easily accessible has been a priority for AKTI in the last year,” explained AKTI Executive Director Jan Billeb. “Ensuring that the information is complete and legally accurate has been our primary goal.”210

Members of the organization are able to see knife law information for any state, while non-members can see quick legal facts about each state. The information was compiled and written by AKTI’s legislative consultant, Dan Lawson, a lawyer who has been involved in the knife industry for more than a decade. Topics include which knives are prohibited, which knives can be sold or manufactured, critical dimensions, major cities with ordinances and more.

The website also features news and action alerts; education on knife use for kids, the general public and law enforcement officers; popular resources like AKTI’s approved knife definitions and guide to traveling with knives; and a monthly fundraising auction that supports the organization’s ongoing legislative efforts. In addition, visitors to the site can buy or renew their memberships, give memberships as gifts and purchase AKTI merchandise online.

“Every year we see more and more people – both our members and the general public – looking for information about safe and legal knife use,” Billeb said. “Our website has been redesigned to make it even easier for visitors to learn more about all facets of knife use in the U.S.”

Access the site at www.AKTI.org. For more information on knives, click here.

Boston City Council Postpones Action On Knife Sales Licensing

In a meeting held Sept. 8, the Boston City Council decided to take no action on a proposal to require the licensing of businesses to sell knives in the city, Knife Rights reported.

It is likely it will be some weeks before a draft ordinance on the matter is presented to the City Council as a whole.

According to the supporters of the proposed license, the action is needed as a means to address the “ever-increasing knife violence in Boston.”

The city officials attending were clearly firm in their conviction that action must be taken and that some scapegoat must be found. There were grieving parents and their genuine heart-wrenching stories of lost loved ones. Public safety officials offered supportive testimony for the proposal. For anyone who attended Boston’s infamous gun control hearings a decade ago, the only difference was the word “guns” was replaced with “knives.”

The testimony and statements during the hearing were eerily reminiscent of past gun control hearings. “Why would we allow any corner store to sell these dangerous weapons (knives)?” “Selling knives does not support families.” “We must do everything we can to restrict access to these dangerous weapons.” “Why would anyone need a knife with a blade more than two inches long?””Knives are fine if you need them for work, but employers should require they be left on the job.”

Anyone involved in the Second Amendment battle of the past few decades knows this is exactly how gun control efforts were initiated. To make matters worse, law enforcement officials testified that “the modern way of approaching these issues is to go after the source of the items rather than the criminals themselves.”

Representing both Knife Rights and the Gun Owners’ Action League (GOAL), GOAL Executive Director Jim Wallace told the City Council to take careful and meaningful steps in addressing the problem of violent crime. “I urge the City Council to review what it is about to do and reflect on the failures of gun control,” said Wallace. “Over a decade ago I had to testify before committees in the state house with grieving families in the background. Now I sit before you a decade later with grieving families behind me again. If you proceed down this path and get it wrong again, ten years from now we will likely repeat this scene yet again.”

Wallace also reminded the council members that the stores in question are already licensed by the city, for which they pay a fee and are subject to city oversight as to their compliance with the law. Moreover, he added, there is already an ordinance on the books that makes it illegal to sell a knife with a blade two inches or longer to anyone under age 18. He reiterated that there is no need for new regulation.  

If you are a Boston citizen, here is a link to the council members’ Web pages where you can find a link to contact them and express your concern: http://www.cityofboston.gov/citycouncil/councillors

Benchmade Awarded Prestigious LEED-EB: O&M Gold Certification

First Manufacturing Company in Oregon to Achieve This Level

LEED Logo

July 28, 2011, OREGON CITY, Ore.-The US Green Building Council (USGBC) has awarded Benchmade Knife Company with Gold Certification LEED EB: O&M for their facility in Oregon City, Oregon. This award represents an extensive effort by Benchmade to adhere to a number of environmentally rigorous standards. Benchmade is the first Oregon manufacturing company to achieve this highly esteemed Gold Certification.

“Our entire workforce played a role in helping us get LEED Gold,” says Les de Asis, Founder and CEO of Benchmade. “These efforts will payoff in terms of both reducing our environmental impact as well as improving our bottom line.”  

Developed by the U.S. Green Building Council (USGBC), LEED is an internationally recognized green building certification system. The system identifies best practices for buildings in the areas of energy efficiency, water conservation, sustainable grounds, healthy indoor air quality, and environmentally friendly materials. LEED EB: O&M certification, otherwise known as LEED for Existing Buildings: Operations & Maintenance, identifies and rewards current best practices and provides an outline for buildings to use less energy, water, and natural resources, improve indoor environment, and uncover operating inefficiencies.  

“LEED certification identifies Benchmade Knife Company as a pioneering example of sustainable design and demonstrates their leadership in transforming the building industry” commented S. Richard Fedrizzi, President, CEO and Founding Chairman, US Green Building Council.

To attain LEED EB: O&M, a building must address five broad categories: sustainable sites, water efficiency, energy & atmosphere, materials & resources, and indoor environmental quality. Benchmade discovered innovative ways to improve the efficiency of their building, including:

  • installed economizer on all HVAC units controlling and reducing emissions for office environments
  • installed ENERGY STARâ„¢, White PVC Versiflex roof
  • installed T5HO4 Lamp fixtures for operation general lighting, resulting in annually saving of 51,073 kWh, 88% Return on Investment (ROI), estimated by Energy Trust of Oregon
  • installed ultra water saver faucet aerator (0.5 gpm @ 60psi)
  • monitoring and controlling industrial water
  • reduce, reuse, recycle materials

“Taking the necessary steps to achieve LEED Gold Certification was not easy, but it’s wonderful to be acknowledged for our efforts” said John Ciorba, Benchmade’s Facilities and Maintenance Manager.  

Benchmade was assisted on the project by Green Building Services, a comprehensive sustainable development consulting firm. To date, Green Building Services has managed the certification of more than 350 LEED projects worldwide.

The Gold certified 50,400 square-foot manufacturing facility is located at the Benchmade headquarters in Oregon City, Oregon. Benchmade expects a financial return on their investment in attaining LEED Gold within two years, perhaps sooner.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement