Home Blog Page 202

Iconic Knives Of Europe

0

I received an email from Roberto Mazzarella of knifeplanet.net saying he did some research on traditional European knives, and contacted museums and associations to find one traditional knife for every European nation. He, of course, found out that some nations have many knife patterns they claim as their own, and others were a little more difficult to uncover. But his research did result in a fascinating and diverse array of European knives. He agreed to allow me to link to his resulting article, “Around Europe in 47 Knives: The Most Iconic Knives of Europe.” Whether you agree with his findings or not, it’s at the very least neat to look at the knives.spain

As Mazzarella states in his opening paragraphs,  “Knives have been around since caveman chiseled stones to meet their daily needs. Nowadays, thankfully, knife making has progressed quite a ways. In Europe, knife making and knives have a rich, deep and complex history, dating back to cavemen themselves. Therefore, the continent is home to thousands of diverse and unique knives and knife making cultures stretching from medieval Belgium to Ottoman Turkey. Being such a diverse and unique area, however, we wondered how knives differed around the continent. For example, is an iconic knife in Belarus the same as a knife in Bulgaria? Is there an iconic knife from Albania? german-jagdnicker-compressedDue to the fact that there has never been any in-depth research of this kind before, we took it upon ourselves to find these answers. We contacted local knife makers, museums, knife collectors, and local historians from every country in Europe. This never-before done research took over a month of grueling research and labor.” bularian-karakulak-compressed

See the entire article here.

Knives of TV’s Grimm in New BLADE®

Grimm TV knives.
GRIMM — “Bad Luck” Episode 414 — Pictured: Richard Brake as Nigel Edmund — (Photo by: Scott Green/NBC)
Grimm knives in new BLADE.
The knives of TV’s Grimm help highlight the latest BLADE®, on newsstands now!

Knives on television and in the movies have a way of both mesmerizing audiences and giving a knifemaker’s career a much-needed boost—and such could be the case with the double-bit axe bladesmith Arnon Kartmazov made for the hit TV show, Grimm. Read all about Kartmazov’s cutter and other knives of TV’s Grimm in the new issue of BLADE®, on newsstands now.

Kartmazov’s piece on Grimm is a rare double-TV coup for the Oregon-based maker, who also appeared on The History Channel’s Forged In Fire earlier this year. Where it will take his career is anyone’s guess but it sure as heck can’t hurt any.

Speaking of Forged In Fire, ABS master smith Joe Szilaski examines the show’s format of requiring contestants to make a knife in three hours. Can such a format really result in knives that “will cut,” as the show’s Doug Marcaida likes to say? Szilaski gives you his expert opinion on the subject in his story, “3-Hour Knives: Are They Legit?”

Job 1 of knives is to cut and, as Spyderco notes on one of its old steel charts, “Steel is The Heart of The Knife.”  (Right below that slogan on the same chart is “And Heat Treating is The Spirit.”)

Japanese swords of World War II
Check out the conclusion of Lonnie Kapp’s story on Japanese swords of World War II in the new BLADE®.

The latest in steels is always a hot topic in the knife industry, but, when it comes right down to it, it’s the steels the companies use most on their newest models that should tell you which steels are most popular at the moment. Find out in chart form what those steels are and which companies are using them in “5 Hottest Blade Steels.”

Also this issue: the conclusion of Lonnie Kapp’s two-parter on Japanese swords of World War II; how tactical custom daggers are making a comeback; how its latest award-winning knives are transforming the American Bladesmith Society into an International Bladesmith Society of sorts; tests of big camp knives; and the latest in knives for law enforcement officers. Get it all and more in the new BLADE, on newsstands now.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments on this and many more knife rights issues with a subscription to BLADE.

Is There Knife Law Common Sense?

According to the American Knife & Tool Institute (AKTI), at least some legislators show “common ‘knife law’ sense.” On September 30, 2015, the AKTI presented Senators Mike Enzi, R-WY, and Ron Wyden, D-OR, with the “Common Sense Award.” The award is designed to honor Members of Congress who have worked across party lines to further common sense legislation.

In its first ever presentation, AKTI honored Senators Enzi and Wyden for their tireless work on the Knife Owners’ Protection Act (KOPA), a bill that will ensure federal protection for lawful knife owners from the current patchwork of state and local knife laws.0781bdeb-0e49-44ee-9873-1e65203dbb06

“Knives are essential tools for hunters and various occupations and the right to carry them with you when you’re on the road is something that should be protected,” Enzi said. “With thousands of knife laws across the country, our legislation provides a common sense solution that respects the rights of states while providing the protection that knife owners need to ensure they can travel without fear of prosecution.”

Click here for the rest of the story.                       Shown in the image are AKTI board members presenting the “Common Sense” Award to Sen. Ron Wyden.  From left to right are Dan Lawson (Microtech), Sen. Wyden, C.J. Buck (Buck Knives), David Fee (Benchmade), Bill Raczkowski (Gerber), Morgan Taylor (Taylor Brands) and Mark Schreiber, CRKT.

Japanese Swords Remain Iconic

0

In the December 2015 issue of BLADE®, Leon Kapp penned the first part of a two-part series on historic, iconic Japenese swords. He concludes the series in the January 2016 issue, which is hitting newsstands and subscribers’ doorsteps October 6th, 2015. In the first part, titled “The Sun Rises On Them Still,” Kapp begins:Fig 6 Takeshita Yasukuni katana

Fig 3 army mounting 1944It was seven long decades ago on Sept. 2, 1945, that the Japanese signed the agreement formalizing their surrender, for all intents and purposes officially marking the end of the Second World War. The ceremony aboard the deck of the USS Missouri in Tokyo Bay took all of 23 minutes to close the book on a conflict that extinguished more lives and destroyed more goods and property than any before or since.

While the world has changed much since then, one of the most iconic symbols that existed long before and throughout World War II—and continues to resonate today—is the Japanese sword. To read the rest, see the December 2015 and January 2016 issues of BLADE. Fig 14 lieutenant with kyu-gunto

Knife History Made In Kansas City

Bump wins Best of Show.
Bruce Bump won Best Of Show at the International Custom Cutlery Exposition for his cut ‘n shoot model.

Modern custom knife history was made this past weekend in the first-ever International Custom Cutlery Exposition (ICCE) held at the Marriott Downtown in Kansas City.

It was the first time the Knifemakers’ Guild and the American Bladesmith Society, the world’s two oldest and best-known knifemaker organizations, combined forces to hold a joint knife show.

And from all indications, things went about as smoothly as anyone could have hoped.

Over 120 makers exhibited their knives at the show. A number of exhibitors commented on how nice it was to see makers from both organizations displaying side-by-side and getting along so well. Of course, that was a far cry from the old days when the two groups competed openly and did not get along so well, to say the least. However, those days seemed to be forgotten over the weekend as both organizations came together and voted on the best knives of the show, with members of each group often voting for knives by makers in the other. Among the winners of the awards were Bruce Bump for Best In Show for his cut ‘n shoot knife, Paul LeBatard won an award for his stag hunter, Adam DesRosiers for Best Combat Knife and Best Hunter, Jerry Moen for Best Tactical Folder, Johnny Stout for Best Folder, Charles Vestal for Best Fighter, and J.W. Randall for Best Damascus. Other honors included Betty Dowell being presented with the Nate Posner Award and Dianna Casteel winning the Red Watson Award.

There was a lot of history at the show, as it was held in the very same showroom as the one where BLADE Magazine Cutlery Hall-Of-Fame© member Bill Moran introduced his revolutionary damascus knives at the 1973 Knifemakers’ Guild Show. In honor of that monumental event, the ICCE presented a special Bill Moran Memorial Damascus Knife Award, with the winner being Bill Burke.

A complete rundown of other of the show’s knifemaking awards and other highlights will be in a future issue of BLADE®.


The latest issue of BLADE is on newsstands now!Recommended:

Stay abreast of the latest developments on this and many more knife rights issues with a subscription to BLADE.

Forged In Fire Renewed For 2nd Season

Second season for Forged In Fire.
Forged In Fire has been renewed for a second season. (Miller Mobley/HISTORY)

Forged In Fire, The History Channel’s hit summer reality TV show featuring bladesmiths who compete to see who can forge the best knife, has been renewed for a second season, Cynopsis Media reports.

According to Cynopsis, “History’s Forged In Fire will be back for a sophomore season. The show, which averaged 1.6 total million viewers in Live+7 delivery, follows the most talented bladesmiths as they create weapons from the Japanese katana to the medieval broadsword.”

The stars of Forged In Fire include a panel of three judges—ABS master smith J. Neilson, ancient weapons authority David Baker and martial artist/knife user Doug Marcaida—and host Wil Willis, along with the many competing bladesmiths.

While the show had been sending out casting calls for bladesmiths for a new season, there had been no formal confirmation of its renewal until the official announcement by Cynopsis. Whether there will be any changes in the show’s format, when the new season will begin, etc., is unknown at this time.

In a nutshell, Forged In Fire consists of four bladesmiths—different ones each episode—who compete to see who can make the best knife. In the first round each smith has roughly three hours to design and make in the show’s shop/forge a rough-forged knife of his choice according to the specs and with materials determined by the judges. The three smiths of the four the judges deem to have made the best rough knives advance to the next round, in which they must make and attach the handles and finish their knives. Of the three remaining smiths, the two who make the best knives in the judges’ estimation advance to the finals, in which they have five days in their home forges to make a knife, sword, axe or other cutting tool in a design of the judges’ choosing. The smith who makes the best piece in the judges’ estimation wins $10,000.

For a behind-the-scenes look at the show, see the December BLADE®, on newsstands now, or subscribe.


Also Check Out:

T7174Knives 2016, 36th Edition
The trusted guide for knife collectors, enthusiasts, knifemakers, and dealers around the world, this knife book covers the latest and greatest from front to back. A collection of feature articles explores the latest developments, history, and transformation of knives, swords, and edges of various kinds. Get your copy

 

 

1st-Ever Women’s Cutting Competition Set

Shanna Kemp and Gary Bond.
Jantz Supply’s Shanna Kemp receives instruction from two-time BLADE Show World Championship Cutting Competition titlist Gary Bond.

The first-ever women’s division in a BladeSports International Cutting Competition was conducted Saturday, Sept. 19, at Jantz Supply in Davis, Oklahoma.

“BladeSports has long talked about the possibility of a women’s division in our sport,” noted Donavon Phillips, executive director of BladeSports International (BSI). “We are past the possibility now. It has arrived.”

The BladeSports International (BSI)-sanctioned event, which ran from 10 a.m. to 4 p.m., also included a men’s competition. Competitors ran an obstacle course including cutting 2x4s, rope, water-filled plastic bottles, a straw lengthwise and slicing rolling tennis balls.

Though women have competed in the men’s division before—including the first-ever female qualifier for the BLADE Show World Championship, Jessica Elias, won for an unprecedented third straight time by Dan Keffeler this past June in Atlanta—the event marked the first time women have had a BSI division all to themselves.

“Knives have long been considered the tool of choice for men but more and more women are not only carrying knives regularly for protection and general use, but are now joining the ranks of men who compete in competitive knife events,” noted Ken Jantz, founder and CEO of Jantz Supply.

On Aug. 15, Jantz Supply hosted a training session in which four women and nine men became certified to compete in BSI events. A total of seven women have national BSI certification. The top competitors at both events earned points toward qualifying for next year’s national competition to be held in the spring in Dallas, Texas, and the BLADE Show World Championship in Atlanta June 4.

Jantz Supply has been in business for over 30 years and manufactures and supplies knife blanks, knifemaking components and tools. For more information visit www.knifemaking.com.


Also Check Out:

Tactical Knifemaking.Making Tactical Fixed Blades DVD

Learn both basic and advanced knife making techniques with expert instruction from Allen Alishewitz in Tactical Fixed Blades. Allen demonstrates how to craft a double-edged tactical fixed blade knife from start to finish, and creates two knives in order to fully illustrate the knife building process. You’ll learn:

– Profiling and Drilling the Knife
– Tang Tapering on a Grinder
– Tang Tapering on a Mill
– And more!

Order here

 
Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement