The BLADE Blogs

The blogs of the BLADE editors, Steve Shackleford and Erin Healy.

Maximize Your BLADE Show Experience

Maximize your BLADE Show experience.
Maximize your BLADE Show experience by knowing what to see and when. (PointSeven image)

The 34th Annual BLADE Show starts this Friday at the Cobb Galleria in Atlanta and you can maximize your experience by knowing what to see and when. But before you do that, be sure you come prepared.

1) Dress appropriately. Comfort is the watchword. Bring two pairs of shoes—one to wear while walking the show in the morning, the other for the afternoon. And be sure they’re well broken in and comfortable! Don’t worry about being a fashion plate. Getting around the 116,000-square-foot hall is a marathon, not a fashion show runway. Leave the spiked heels at home.

2) Carry a small water bottle. The show hall can get humid/hot and you need to stay hydrated.

3) Eat an apple mid-morning and mid-afternoon for energy and to maintain your, ahem, constitution. Apples also are good for hydration.

4) Don’t be afraid to bring a roller case (like the one pictured herein being pulled by award-winning Canadian knifemaker Brent Beshara) or small backpack to carry stuff (including your extra pair of shoes, ball cap and sunglasses [see below]). Carry bags can get hard on your arm after a while.

5) Wear a ball cap and sunglasses—and shorts if you can because Atlanta gets hot in the afternoon in June—in case you want to watch any of the outdoor seminars. The sun can beat down on your head and give you a heckuva headache;

As for stuff to see, the main attraction, of course, is knives and more of them than you will see at any one time under one roof anywhere. There are also other attractions, including:

•On Thursday, the day before the show begins, and Friday the world’s foremost knife authorities will conduct classes on a variety of knife subjects in the 2nd Annual BLADE University. Learn from such world-famous makers as Jerry Fisk, Bill Harsey, Tony Bose, Ed Fowler, Ryan Johnson, Spartan Blades, Case, Joe Keeslar, Murray Carter and many more;

•By noon Friday all entries for the BLADE Magazine Knife Of The Year® Awards sponsored by New Graham Knives must be on display in the Knife Of The Year Display Area, which will have a new location this year—in the show lobby—for your viewing pleasure;

•At 2 p.m. Friday the show opens to the public but you’d better get there well before then because the lines start to form early;

•Friday after high noon, ABS master smith Jason Knight and other world-class smiths will hold an impromptu forging session in The Courtyard, the parking lot of the host Renaissance-Waverly Hotel, until the show closes at 7 p.m. This is a last-minute addition to the show and should be a rare treat;

•Saturday at 10 a.m. the ABS will hold its annual auction of top ABS handforged knives in Room 103;

•Saturday at 12:30 p.m. the ABS forging demonstration returns to The Courtyard with ABS master smith Timothy Potier showing you the ins and outs of how to handforge a knife;

•On Saturday at 4:15 p.m. Jessica Elias, the first-ever female contestant in the 13th Annual BLADE Show World Championship Cutting Competition conducted by BladeSports International, will show her stuff in The Courtyard along with the rest of this year’s qualifiers;

•FREE BLADE Show programs and August/BLADE Show preview issues of BLADE® will be distributed in the show lobby containing complete show schedules, events, exhibitor table and booth numbers and much more.

•After show hours, hit The Pit in the Renaissance-Waverly Hotel lobby to share sharp tales of the day’s events, what you saw, what others saw and more. Things are usually hopping/get hopping by 8 or 8:30 p.m., sometimes earlier.

Come on down and enjoy the show!

Is a World Ivory Ban in the Offing?

A CITES meeting that could determine whether there will be a world ivory ban begins Sept. 24 in Johannesburg, South Africa.

The 17th annual meeting of the CITES Conference of Parties is set to run through Oct. 5 and will include individuals and organizations around the globe who are for or against a world ivory ban, as well as a ban on ancient and other ivories. CITES stands for “Convention on International Trade in Endangered Species of Wild Fauna and Flora,” and is “an international agreement among governments … to ensure international trade in specimens of wild animals and plants does not threaten their survival.”

Lile ivory folder
A world ivory ban would make such classic knives as this circa 1970s folder by BLADE® Magazine Cutlery Hall-Of-Fame© member Jimmy Lile illegal. (Jack Lucarelli image)

Elephant Protection Association officials indicate they expect animal rights groups to push for terminating “sustainable use” as a means of conserving any listed or endangered wildlife, which includes elephants and the trade of ivory. For U.S. owners of legal elephant ivory, this could at the very least mean losing the narrow “De Minimis Exception” in the recent Federal Domestic Ivory Ban instituted in July. Though it allows an extremely low amount of per-person trade in elephant ivory, the De Minimis Exception does allow some of it.

Non-governmental organizations (NGOs) fighting for a worldwide elephant ivory ban want CITES to list all African elephants on Appendix I. If the NGOs are successful, it will lead to even more pressure on the U.S. Fish and Wildlife Service (FWS) to list all elephants as endangered, too. According to the Elephant Protection Association, the FWS has indicated that if CITES puts elephants on the endangered list, FWS would abolish the De Minimis Exception. But that’s not all.

The Elephant Protection Association’s Rob Mitchell reports that the petition to declare elephants endangered is already under review. “I don’t know low long before they will reach a final determination, but it won’t surprise me one bit if they try to time it to coincide with [the Sept. 24-Oct. 5 meeting],” he notes. In fact, “FWS could make the determination even if CITES does not list all elephants on Appendix I.”

For more information, stay tuned to www.elephantprotection.org. (Editor’s note: The Elephant Protection Association is building a new website. You also can stay updated on elephant ivory news by watching videos from The Conservation Imperative on the Association’s Facebook page.)

 

 

Save

Midweek Maker Military-Style: Allan Reid

Allan Reid is the talent behind ARctc Knives.
Allan Reid of Allan Reid Cut Throat Custom Knives is a part-time knifemaker who is a nurse by trade. He served in the U.S. Army. as a combat medic, obtaining the rank of sergeant.

Allan Reid of ARctc Knives, which stands for Allan Reid of Cut Throat Custom Knives, is a part-time maker who currently works as a nurse. He served for six years as a U.S. Army combat medic, achieving the rank of sergeant. In 2005-2006 he deployed on Operation Iraqi Freedom. Most recently, he earned his registered nursing credentials.

Allan Reid of ARctc Knives served in the U.S. Army as a combat medic.
Allan Reid of ARctc Knives parlayed his combat medic training into a nursing career. He has completed his schooling and is awaiting his state board certification.

Allan has been fascinated with blades and martial arts since childhood. “I was exposed to several custom knives while on deployment, which spurred my interest in knifemaking,” he noted. He learned about stock-removal methods by reading and asking questions on knife forums. He is now learning to forge blades under the mentorship of close friends James Helm and Tobin Nieto.

Allan is the father of four with another on the way. He and his family live in San Antonio, Texas.

  • Best-selling knife patterns: tactical, utility and bushcraft; Alpha-1, Nessmuk and Mini-muk models
  • Favorite blade steels: high-carbon and tool for edge retention; 1084 for ease of heat-treat and durability. “I also utilize 5160 spring steel for my larger blades, and often incorporate O1 and 1095.”
  • Blade grinds: full flat or saber
  • How he tests his knives: If Allan knows the intended use, those mediums will be cut, however, almost all of his blades are tested on 2-by-4s.
  • Favorite handle materials: G10 and Micarta for toughness, durability, color selection and low maintenance
  • Price range: $145-$400
  • Knife shows he attends: Texas shows, BLADE Show 2018
  • Forums he participates in: BladeForums.com when time allows
The Alpha-1 is just one of many knife designs offered by ARctc Knives.
As a former soldier, knifemaker Allan Reid of ARctc Knives is a fan of easy-to-maintain and cost-effective handle materials.

The Alpha-1 above has a 5-inch blade made out of 1084 steel with a full flat grind and acid stonewashed finish. The scales are Camo Micarta fitted with Black Micarta pins. Overall length is 9 ¼ inches. Maker’s list price: $165.

Allan Reid tried out a kwaiken design on his latest edged creation.
The ARctc Knives kwaiken-design knife has a 4.5-inch combination-ground blade made out of O1 tool steel. It’s 9 inches overall. The handle features an epoxy-sealed red paracord base under a black Japanese lace wrap. Maker’s list price: $180 with Kydex sheath and belt attachment.

Contact Allan Reid at [email protected], on Facebook at Allan Reid and on Instagram @arctc_knives.

Vote For Your Favorite Expendables 2 Knife!

Sylvester Stallone’s Expendables 2 action blockbuster took the box office by storm this past weekend, in no small part thanks to the knives made for the movie by Blade Magazine Cutlery Hall-Of-Fame© member Gil Hibben.

    All of which got us to thinking …

    Which of Hibben’s knives in the movie is your favorite? Is it (starting from top above), the Legion Fighter on the cover of the November BLADE® (on newsstands NOW), the Toothpick, the Alamo Bowie or the Double Shadow?

    Let us know via a post, e-mail or whatever electronic means you need to use in order to vote.

    And please, only one vote per person!

    All of the above pictures except for the cover are by Mike Carter.

For the latest knives, knife trends, knifemakers, what knives to buy and where, knife legislation, knifemaking instruction, and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?lid=blss082112

Good and Bad Knife Bills Brewing

 

There is both good and bad news from Washington state. Starting with the good, two companion bills, Senate Bill 6179 and House Bill 2347, would make it legal to manufacture spring-assisted and switchblade knives in the state. The bills also clarify the definition of a switchblade, or what is referred to in Oregon law as a “spring blade knife,” so as to not include assisted-opening knives that are currently subject to adverse interpretation of the state statute, making them technically illegal. In addition, the bill would expand the existing law enforcement exemption for possession of “spring blade knives” to members of the military, full-time first responders and the citizens who hold a valid Washington concealed pistol license (Washington is a “shall issue” state).

Knife Rights Director of Legislative Affairs Todd Rather will be in Olympia on Wednesday to testify in support of the bills on behalf of Washington’s knife owners. The bills are a big incremental step forward in a state where any knife with a spring assisted blade has been interpreted as being illegal and where Washington knife companies, such as Fox Knives USA and SOG, were prohibited from even manufacturing such knives in the state, sending those jobs to other states with more rational knife laws, including neighboring Oregon.

The bad news is that last year’s ridiculous anti-knife bill, HB 1006, which would make it illegal to conceal any knife over 3 1/2 inches long even with a Washington concealed pistol permit (since it is not a concealed weapon permit), has been resurrected. In a state where a long coat is a normal part of every outdoor enthusiast’s, fisherman’s and hunter’s attire for a good part of the year, this would turn honest citizens into criminals for carrying a modestly sized sheath knife on their belt, along with quite a few common folding knives longer than the arbitrary length limit.

If you live, work or travel in Washington state, please contact BOTH your Senator and Representative in Olympia and ask them to support SB 1234 and HB 2347, respectively, and ask your Representative to help kill HB 1006 for good. Click here to locate your legislators, or the legislators who represent where you work or travel.

 The preceding is courtesy of Knife Rights. For more information click on http://kniferights.org/

 

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb230112#BL1SU

 

 

2 Days To The BLADE Show: The Pit

Only two more days to the BLADE Show (www.bladeshow.com) June 8-10 at the Cobb Galleria Centre in Atlanta, which, in addition to the world’s greatest knives and more of them than any other knife show, is your chance to party down with the knife industry in The Pit.

    The sunken lounge in the show’s host hotel, the Renaissance Waverly, The Pit has been the scene of many an after-show-hours impromptu party, introductory meeting, and just a chance to put your feet up and talk knives with your friends over a cold beverage in a relaxed atmosphere.

    There’s no telling who you may meet in The Pit, from the legends of the industry to the latest up-and-coming knifemakers to BLADE® Magazine field editors such as Ed Fowler (in cowboy hat seated on the wall at bottom left of the above picture).

    Just about anything can happen in The Pit and usually does. It is where knife collaboration deals between manufacturers and custom knifemakers have been made, unusual events occur–one year a company official who won a Blade Magazine Knife Of The Year Award earlier in the evening lost his award trophy in The Pit, only to have it returned to him later–revelry extends into the wee hours, and much more.

    We hope to see you there—and be sure you have a designated driver to take you home if need be.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE Magazine, the World’s No. 1 Knife Publication.

Period Bowies Make Best Of Knives 2013 List

These period bowies by Robert L. Appleby Jr. make my “Editors Favorites from the Knives 2013 Book” list because they scream early American knife renaissance. The clip- and spear-point bowies parade hand-rubbed, satin-finished 440C blades with fileworked spines, and cast white-bronze guards and pommels.

The sambar stag handle scales are inspired choices, particularly with nickel escutcheon plates and domed nickel pins. Each comes with a wet-molded leather sheath dyed ox-blood red with gold embossing and an antiqued nickel throat and tip. Getting excited yet? Me, too. The photo is by Chuck Ward. 

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement