Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.
It doesn’t matter if you’re a hunter, outdoorsman, knife enthusiast, collector or even an experienced survivalist or do-it-yourselfer, learning the basics of knife sharpening often takes a backseat to more pressing matters. It’s a question on everyone’s mind—What’s the fastest, easiest way for me to sharpen a knife, and what’s the best sharpener on the market? Unfortunately, there’s no one right answer, but through researched and developed, step-by-step articles on knife sharpening, we’ve made it easy for anyone to learn the basics, and even some of the more involved methods of honing blades.
The “Sharpen A Knife & Care For A Collection” digital download is an easy-to-navigate, read and enjoy eBook. This digital guide is a PDF file you download and access with any home computer, lap top or digital device with the Adobe Reader program installed. In this guide you’ll find 11 chapters covering various facets of knife care and sharpening, written by noted knife industry experts, including Dexter Ewing, Durwood Hollis and James Morgan Ayres.
It’s one of the oldest methods of honing a blade bevel, the most traditional, conjuring up images of ancestors, grandparents, even Japanese bladesmiths working edges on whetstones or oilstones, fingers blackened from the grit. Stone remains a popular sharpening medium. It might not be the Stone Age, but you would hardly know it by perusing the rock-hard offerings of knife or knife sharpener and accessory companies.
Unlike traditional stones bought for pennies apiece at the old hardware store, the Smith’s 2-Stone Sharpening Kit (www.smithsproducts.com) comes with a 5-inch, medium-grit stone, a 4-inch fine Arkansas stone, honing solution and a sharpening guide. The medium-grit stone, meant for quickly setting an edge, comes mounted on a molded-plastic base that features a built-in storage area at the bottom for holding the fine Arkansas stone, the latter of which is ideal for finishing or polishing an edge. The manufacturer’s suggested retail price (MSRP): $15.99.
“It is everything you need to put a razor-sharp edge on your large or small knives and tools,” Richard Smith says. “The neat thing about this kit is that, although you get two stones, they only take up the space of one bench-mounted stone. I never lose the fine stone because it’s always stored in the base, and it allows me to take the fine stone into the field with me if needed.”
In 2013, Ryan Johnson of RMJ Tactical, designer of elite, military, tactical tomahawks, approached CRKTwith the news that he had been working with a few combat veterans that had returned from war with varying degrees of post-traumatic stress disorder (PTSD).
To help work through their challenges, they had been designing and forging steel into custom tools. Drawing from their experience earned in combat situations, they have been creating tools they wished they had available to them in the battlefield. CRKTsaw it as a way to give back to the community, and in 2016 is announcing the launch of the Forged By War program.
The program includes mission-ready tools designed by veterans, with 10 percent of CRKT’s net profits of the program donated to the veterans’ charity of choice. CRKT calls them “Mission ready tools that are … Forged By War.” The first three tools include the new Clever Girl, designed by Austin McGlaun of Columbus, Georgia. This fixed blade tactical knife features a black powder coated, upswept blade with a tough, injection molded, glass-reinforced nylon handle that sits comfortably in a sheath that’s MOLLE-compatible for multiple carry options. It aligns with Austin’s philosophy that in a fight you want something you can grab quickly, use if necessary, and then go home to your family. Austin’s charity is The Green Beret Foundation.
The Sangrador—which means “bleeder” in Latin—features a 5.5-inch, dual-edged SK5 steel dagger-style blade with a black powder coat finish, non-slip G-10 handle and MOLLE-compatible sheath. Its designer, Darrin Sirois of Fayetteville, North Carolina, has seen his fair share of combat as a Special Ops soldier, but his best feedback still comes from teammates. Darrin’s charity is Purple Heart Homes.
The Birler tactical pack axe won’t go AWOL on you when you need to break down doors, bust floors or take down trees to rescue a fallen soldier. Designed by Elmer Roush of Brasstown, North Carolina, a blacksmith and Vietnam vet, the blade is forged from 1055 carbon steel and features a hickory handle. It cuts down pack weight and anything in its way. Elmer’s charity is The Green Beret Foundation.
We Take A Look Inside The Shop Of ABS Master Smith Steve Schwarzer And See How He Makes His Mosaic Damascus Wonders
Of all the forgers of mosaic damascus in the knife industry, none stand out any more than American Bladesmith Society Master Smith Steve Schwarzer.
Steve began forging in the early 1970s. In 1981 he received his ABS master smith rating, his papers signed by none other than one of four ABS founders/BLADE Magazine Cutlery Hall-Of-Fame® member Bill Moran, and was officially recognized as an MS in 1983. Steve has an intense passion for forging mosaic damascus and his contribution to this steel niche over the decades has been immeasurable. Unselfish to the extreme, he has forged damascus for many custom makers and tutored many on forging and the making of pattern-welded steel over the years—which he continues to do to this day.
His awards over 50 years of knifemaking are too numerous to name, as have his appearances in BLADE®. BLADE is delighted to feature Steve once again, this time in a supersized edition of “Shop Dump” to give readers a deep dive into the equipment this modern-day master uses to achieve his magical works.
Inside Steve’s Shop
Steve rescued his Kent USA precision surface grinder from a knifemaker friend. In the process of retrieving it, Steve almost destroyed it while loading it. However, another friend restored it to better than new.
As you can imagine, Steve has acquired a lot of equipment over his many years of knifemaking and has honed his shop to perfection. We asked the artisan to give us an extended tour of his digs and he gladly obliged. He kicked the tour off with his forging hammer.
“The Chambersburg 2 Hammer was my first real game changer,” Steve notes. “I had owned several mechanical hammers before I found it. The control in forging set me apart from others. It also allowed me to work much larger masses of damascus. I have trained dozens of the current top makers pattern welding using this machine. I built my second shop around it. It’s now in my home shop.
“Next up is my custom-built 50-ton Coal Works computer-assisted C Frame press. This is a recent acquisition and is also a game changer for controlled forging. It has a return to 1/100 of an inch. Basically, it comes with millions of electronic stop blocks. It has the ability to swap dies to any configuration in minutes. I have built many presses over the years; this one has all the benefits and adaptability afforded by all the others combined. I worked very closely with the crew at Coal Iron to bring this beast to life. I’m still exploring its capabilities.”
Grinders are a must-have of any maker’s shop and Schwarzer has a passel of them.
“I own four Beaumont grinders—one for over 20 years—and they are great machines that track properly,” Steve states. “Three are 2×72 belt grinders, two with controllers. They’re constructed of steel, making it very easy to make tooling and various fixtures for any project. The disc grinder runs perfectly true, making grinding precision angles a breeze.”
Steve Schwarzer’s Forges
Steve’s ribbon burner is one of several forges in his shop. He designed it and a close friend built it. It’s purpose-built for working very large canister damascus.
Steve brings the heat to his steel with a forge of his design.
“My forge is one of several I run in my shop. It’s a ribbon burner designed by me and constructed by a close friend. It’s purpose-built for working very large canister damascus. I have built dozens of forges over the last 40 years. This is the latest version. My previous forges were all versions of a Don Fogg design.”
If you’ve read past installments of “Shop Dump,” you know it’s not at all uncommon for equipment to be passed down from one maker to the next. Such is the case with Steve’s mill and surface grinder.
“My Kent USA knee mill is my go-to for all precision drilling and milling. It was rescued from a retired knifemaker who took excellent care of it,” Steve relates. “It’s variable speed, making it handy for all types of tooling.
“I also rescued my Kent USA precision surface grinder from the same knifemaker. It had a history when I went to retrieve it. I made a rookie mistake loading it. Long story short, I, for all practical purposes, destroyed it. I broke about everything on it. I had in mind to scrap it. I called a friend who owns one and asked if he wanted it for parts. He said, ‘Let me look at it.’ I took it to his shop. He is a true wizard. He totally restored the machine I thought was lost to better than new. He also taught me how to properly grind with it. I will always be grateful.”
If walls could talk there is no telling how many amusing tales Schwarzer’s shop could tell.
“I have a shop full of machines, all with some story attached,” the affable bladesmith said. “My tool rack has dozens of hammers and tongs collected over 40 years. This is my happy place. I love teaching and sharing the stories with students and friends.”
For more information contact Steve Schwarzer through his website at steveschwarzer.com.
The New Lucid From Kershaw Is An Exciting New Entry To The EDC Market That Can Also Be Your Companion On A Jobsite.
There are thousands of knives that are great EDC options but nowhere near as many that can also handle the abuse of being a workhorse on the jobsite. The new Kershaw Lucid is an exception.
The handle provides an excellent grip. One side is a glass-filled nylon scale in a rich shade of blue, and the other side is made from stainless steel with a nylon inlay. The 8Cr13MoV blade holds an edge well and is easy to resharpen. The knife looks great, feels great, and sits well in the hand. The assisted flipper is fun and easy to use, and the frame lock keeps everything tight and secure.
It’s a simple knife that is more than the sum of its parts. And there’s an elegance in that. Add in a price tag under $50, and you have a knife that’s a winner in multiple ways.
Thanks To The Internet, Straight Razors Are Back In Style. These Trio Of Blades Can Keep You Looking Sharp And Feeling Smooth.
Mastering shaving with a sho-nuff handheld straight razor is a lost art that has recently become more popular thanks to social media shaving gurus and those who like a good challenge.
Straight razors never went away, the internet just has a knack for making old things new and cool again. Let’s look at a trio of current offerings and shave them through their paces.
Boker King Cutter
Boker King Cutter
Boker has been producing straight razors since 1869 and the company offers many models today. The King Cutter, the company’s most popular razor, features a carbon steel blade with a deep hollow grind. The handle is a black polymer with a brass Boker Tree Brand logo escutcheon. The King Cutter was the lightest of the three review pieces, tipping the scales at a svelte 1.47 ounces. It features a monkey tail tang for quick blade access.
Being the most expensive of the test lot by a long shot and from a company that has been making straight razors for over 150 years, you’d expect the King Cutter to perform well. Simply put, it did. The blade was, ahem, razor-sharp right out of the box and glided through my two-day stubble clean as a whistle. I never had to back up and go over an area to get it smoother.
The thinnest of the review blades, it got into tight spots a bit easier. However, a word of warning is in order. An extremely sharp blade like this will cut you faster, too, so take your time! The King Cutter’s high price tag may scare some away, though there are other straight razors out there that cost much more.
MSRP: $189.95
Rough Ryder Cinnamon Bone Stag Razor
Rough Ryder Cinnamon Bone Stag Razor
Rough Ryder’s Cinnamon Bone Stag Razor has all the trappings at a budget price, including the good looks of a traditional straight razor. The cinnamon bone stag handle, replete with an acorn escutcheon, is downright handsome—and Rough Ryder does bone stag well.
The cutting portion of the blade has a light yet distinctive damascus pattern running across its face, and a barber’s notch at the point aids in safely opening and deploying the blade. A monkey tail tang completes the package.
Right out of the box, the Rough Ryder entry shaved the stubble straight from my face. The blade was plenty sharp and I was able to get into tight spots with good results. When you get down to the nitty-gritty, there are differences between this razor and an expensive one like the Boker.
There is a tad more drag on the blade and I had to back up a few times to get the area I was shaving totally smooth. To be honest, I expect this from a razor at this price point, and you should, too. That said, the Rough Ryder Cinnamon Bone got the job done and was no slouch. I recommend this razor to those who want to get their feet wet before taking the plunge on a high-dollar cutter. And, by golly, it was the most attractive of the bunch!
MSRP: $29.99
TOPS Knives Tac-Raze 2
TOPS Knives Tac-Raze 2
The TOPS Knives Tac-Raze 2 is designed as an EDC and not billed as a straight razor. Nonetheless, we threw it into the fray to see if we could shave with it, letting the chips fall where they may.
A full 2.625 inches of the blunt-tipped blade has a slightly bowed edge. There’s a rat-tail tang reminiscent of the old friction folders, though not forged. The Tac-Raze 2 has a deep choil below the blade edge that splits time with the handle. TOPS includes a dark brown leather slip and a small bottle of protectant.
Would an EDC with a razor-style blade shave? Given how many YouTube videos there are of guys shaving with everything from bowies to kitchen fare, I figured why the heck not? A cursory check right out of the box with the blade warmed up and a light coat of shaving cream on a cheek gave me surprising results. Not only did the Tac-Raze 2 shave my stubbled skin with ease, it was darn smooth! Next, I cleaned the blade up and stropped it, and the shave was as smooth as I could get with a standard straight razor.
As I worked around my face I found some gremlins with the TOPS EDC. The handle is not nearly as nimble as a standard straight razor, which is to be expected since it’s not a standard straight razor. I found getting into tight areas like the crack between my upper lip and cheek particularly dicey. Bottom line? What you lose in dexterity with the Tac-Raze 2 you gain in versatility since, after all, this is an EDC knife with all the benefits—and it comes with a slick leather slip.
MSRP: $139
Scoring The Straight Razors
All three in our razor trio had their strengths and weaknesses, but all got the job done. The Boker King Cutter is the pro razor of the bunch. The Rough Ryder Cinnamon Bone is a nice entry-level shaver, and the TOPS Tac-Raze 2 is certainly the most versatile.
One final note: don’t be afraid to try a straight razor. As a knife enthusiast, chances are you’ve already developed a healthy respect for sharp blades. Wade in slowly and carefully—once you get a feel for the straight razor, it will feel right at home in your hand. Happy shaving!
A Pair Of Gifted Knifemakers Show Off The Tools They Use To Turn Raw Steel Into Razor-Sharp Works Of Art.
Simply put, Salem Straub makes art and culinary knives of the highest order. He began forging in 2003 when a previous project introduced him to blacksmithing and, like so many knifemakers, once the bug bit there was no turning back.
Twenty years later Salem is at the top of his game and all his work is sole authorship. What’s more, he delighted many knife lovers by competing and winning in the second season of the History Channel’s popular reality show, Forged in Fire.
Award-winning bladesmith Salem Straub makes fine art folders, fixed blades and swords, and added culinary knives out of his passion for cooking.
Salem operates his custom cutlery business under the name Promethean Knives after a passage from noted British writer Zia Haider Rahman: “Is that not the Promethean fable, that the fire stolen from the gods will light men their way even while it burns their hands?”
Salem built his reputation for making fine art folders and fixed blades, including swords, but he added culinary knives out of his passion for cooking, which in turn led to his winning the Best Integral Award at the 2019 Damasteel Chef Invitational. His forging specialty is extremely fine patterned damascus.
Inside Salem Straub’s Shop
Salem leads off his list of top tools with his bandsaw.
“The Marvel Model 81 Hydraulic Vertical Bandsaw is the ideal saw for a dedicated pattern welder,” he begins. “It will easily handle all the normal operations that either a horizontal or vertical bandsaw can, but also affords the additional capability of ripping lengthwise with power feed, miter cuts, compound miter cuts and rips. Everything from the table vise to the saw feed and drive wheel is hydraulically powered, and a flood coolant system is integral to the design.”
Straub’s Marvel Model 81 Hydraulic Vertical Bandsaw easily handles anything a horizontal or vertical bandsaw can, and affords the additional capability of ripping lengthwise with power feed, miter cuts, compound miter cuts and rips.
His lathe of choice is his Pratt & Whitney Model C Toolroom model.
“It’s a bit larger than might be strictly necessary for knifemaking,” Salem notes, “but affords the ability to create parts for repair of, or modification to, other machines. It’s also very smooth, accurate and convenient for making and threading small knife parts to close tolerances. The P&W ‘C’ lathes are among the truly legendary lathes from the heyday of American machine tool manufacturing.”
His Abrasive Machine Tool Model 3B Surface Grinder features an 8×24-inch capacity automatic table with a magnetic chuck, a 2×72-inch-belt modification by Salem, and a 3-horsepower motor.
“The table feeds are mechanically powered and relatively quiet and very reliable in operation,” he explains. “This machine is MVP in the shop, especially on many damascus production days. The belt modification allows for much faster removal of stock, making billet and tiling work much faster and more precise.
“Another piece of equipment I can’t do without is my Beaudry Champion #9 300-pound power hammer. I bought it from the late Larry Langdon, who gave me quite a deal as it needed lots of work to restore, and some difficult parts had to be made. After I took seven months to overhaul and install it, this hammer has become the cornerstone of my operations in making composite damascus billets and blades. The large flat die surfaces and excellent control make it ideal for forge welding, and it has plenty of power to forge large cross sections efficiently.”
Straub’s chef’s knife sports a 9-inch blade of a stunning herringbone/mosaic composite damascus and a Japanese-style wa handle. (knife image by Abe Shaw of Eating Tools, Inc.)
Next up Straub extols the virtues of his rolling mill.
“My 10-horsepower rolling mill with 6×6-inch rollers is probably a tertiary forging machine for most hot shops to have—after a hammer and press—but it’s very handy indeed for cleanly drawing billets to bar stock, welding san-mai, and sizing pattern elements before tiling or four-way welds and the like. It was built to spec by a fab shop for my friend Mike Blue, whom I bought it from. I consider it a very good working design, and for production damascus it’s a huge help.”
Last but not least, Salem mentions his 1960s-era Deckel GK21 Pantograph.
“This is a machine quite unlike the others. Its use is quiet, contemplative, technical, and its mode of use is more artistic than one of brute force. The GK21 is a machine that pretty much defines its class—very smooth to operate and fascinating in its potential. I’ve been learning to use it for a few years and so far I’ve been mostly doing inlays for handle work, but I’m branching out into engraving designs onto handles with it, too. I look forward to decades of finding out new cool ways to use it.”
Andreas Kalani
Andreas Kalani specializes in mainstream and culinary fixed blades and also folders.
Andreas Kalani spent 30 years in the corporate world, but once he discovered knifemaking he knew he’d found his calling. Now, nearly 10 years after leaving his former occupation, the Iranian-American is a full-fledged U.S. citizen grinding steel and making the knives of his dreams.
Kalani is an American Bladesmith Society apprentice smith currently working on his journeyman smith designation on the way to his ultimate goal of master smith. The versatile maker builds fixed blades—both mainstream and culinary—and folders.
Among those pieces are some top-shelf art knives. Meanwhile, he also makes a point of offering affordable fare for his customers. He markets his cutlery under the AK Custom Knives label and also instructs budding makers with a separate division called AK University. Needless to say, Andreas keeps himself busy with a full plate of cutlery interests.
Inside Andreas Kalani’s Shop
He leads off his knifemaking go-to equipment with a lightweight wonder.
“One of the most valuable tools in my shop is my Dremel 4000 Rotary Tool,” he reveals. “I use Dremel for engraving, polishing, sanding, cutting and much more. Dremel was my shop’s first official tool before I became a knifemaker. I used to make small and miniature swords and knives for my wire sculpture, and I could grind and shape the blades and handles with my Dremel tool. You can use various tips and bits for multiple uses such as carbide tips for steel and alloys or diamond tips for clay, woods and other materials. The possibilities are endless and you can be super creative with this tool; you can either mount it on the table, make a stand for it, or get an extra pen cable to do much more.”
Next on his list is his Evenheat Kiln.
Andreas not only uses his Evenheat Kiln for heat treating his blades but also for lost-wax processing.
“It is generally used for the blade heat treatment to have better steel structure and accurate Rockwell hardness,” he states. “However, sometimes I use it for lost-wax processing as well. Before I got the kiln I had to send out all of my blades for professional heat treatment and it was time-consuming and costly, especially when I wanted to work on one custom project. Therefore, I had to get my own. With this kiln in the shop I can now heat treat various steels from high carbon to stainless, and know I have a good grain structure and a suitable heat treatment. An Evenheat kiln is one of the must-have tools for any knifemaker in the shop.”
According to Andreas, finishing tools play multiple roles in his operation.
“They are the most used on every project in my shop,” he observes. “From the finishing stones to G-10 sanding blocks, I use them for various sanding and polishing. Gesswein® EDM Blue Stones are made from premium aluminum oxide. EDM Blue is a more complex formulation of EDM stones specially designed to handle the high-speed back-and-forth motion of a profiler or ultrasonic machines, and are superior for polishing the most challenging scales. The stones are designed for use on hard surfaces at high speed and hold their shape very well.”
For the sanding blocks, Andreas created different G-10 paddles for such various uses as flat, concave or convex sanding.
“I add additional leather or plastic backing to each paddle to have more give on a harder surface when sanding,” he notes. “By combining these tools, I can achieve a beautiful finish on all of my blades.”
The Milwaukee Portable Bandsaw 6232-20 is another must-have machine in his shop.
“It’s precise when you want precision cuts or to create an intricate geometry—for example, when you want to make a guard for a knife, you can outline your guard on whatever [steel/alloy] you use and then quickly cut it to the shape. Afterward, you can go straight to the grinder to shape the final form,” he states. “You can purchase different types and styles of the blade for this machine to have a better cut and precision for other materials. It’s portable and I purchased a stand for it separately, which is made specifically for this machine by SWAG Off Road.”
Another invaluable tool in Kalani’s shop is the 25-gallon Sandblaster cabinet, which helps remove material, clean, and applies the final finish to blades.
Kalani’s14.5-inch Lagertha Middle-East chef’s knife features a blade of 1095 carbon steel with an electro-pattern mirror polish. The Natural Galaxy handle is a combo of Middle Eastern turquoise and flowers. (SharpByCoop knife image)
“You can achieve different results on other materials using various media types from the walnut shell, glass bead, aluminum oxide, steel bead and so on,” Andreas explains. “There’s a learning curve and trial and error at the beginning. For example, if you want to sandblast titanium and be able to anodize it, you cannot blast it with aluminum oxide or steel media. The pressure will infuse the titanium and prevent it from anodizing. Based on my trial and error I found out that glass beads not only give a good matte surface to titanium but also keep it clean—and I am able to anodize it.”
He calls the 2×72 TW90 Grinder “the mother of all the machines in the shop.” It has a multi-position setup and various speeds, giving him limitless capability for different styles and types of grinding.
“I own at least five other attachments for this machine, including an 8-inch wheel, a 4-inch wheel, a modular switchable small wheel, a surface grinding attachment, plus flat and slack-belt platen,” Andreas observes. “One best modification I applied to it was adding an earth magnet on my work rest to use for different sizes and styles of work. It’s helpful for a different kind of grinding. For example, if you want to grind a sword, you need a more extensive work rest to run your blade over it, and this is super helpful.”
The Newest Budget EDC From Gerber Gear Is Light And Flexible. The Fuse Would Be An Excellent Knife to Handle Day-To-Day Life.
Gerber Gear’s newest EDC succeeds thanks to its construction. The Fuse has a 7Cr blade connected to a glass-filled nylon handle that makes for a strong, rigid knife. The blade is electroformed stainless, and there are additional stainless liners for even more strength. The liner lock helps keep everything secure and safe while cutting.
The Fuse is the type of knife that is perfect for someone with a new interest in knives or is looking for an EDC that won’t break the bank. There’s a lot to like here. The piece weighs only 2.83 ounces and you can choose between black and flat sage for the handle color.
Is this a revolutionary knife? No. Has Gerber a model that is an entry point for new knife owners? Absolutely.
MSRP: $40
Editor’s Note: This article was written by Mike Ableson.
