Budget To Bang Combos: A Trio Of Great Hunting Knife Sets

When Hunting, One Knife Is Good But More Knives Are Better. These Knife Sets Can Help Make The Hunt Easier No Matter The Size Of The Game.

Each year hunting season rolls around there are experienced hunters and first-time hunters anxious to make their way into the field. Whether a bow hunter or a firearms hunter, one thing remains consistent between the two: They both need something to clean game and prepare it to be able to get it out of the field and home.

No one would argue that you don’t need a knife, but sure enough each hunter would back his choice of blade in a discussion led by the question “What do you use?”

This year, as usual, I found some likely candidates to add to the discussion of whose knife is better, though this time, instead of a single knife to tackle the project, let’s consider knife sets. They can’t get your game for you but we can put them through their paces to see if they can help make the most out of what you do get.

Gerber Moment

Gerber Moment
Here you get a good look at the size difference between the large Utility knife and small Finesse knife in the Gerber Moment. Sometimes a good picture is worth a thousand measurements. Blade and overall lengths: 3.625/3 and 8.625/7 inches. Blade and handle materials: 5Cr15MoV stainless and rubber overmold, glass-filled nylon

The Gerber Moment is a two-knife set. Of the test entries, this one is for the budget-minded hunters looking to spend the short dollar. It is made in China and the fit and finish is darn respectable considering each knife runs about $17.

The two knives were not hair-popping sharp out of the package, though it didn’t take long to up their edge games. Both the large utility knife and the small finesse model come with contoured rubber grips. 

The scales do not totally cover the full-tang handle design. A small perimeter of the tang is left exposed around the scales. At the rear of each tang are small oblong-shaped notches to serve as lanyard holes. They’re small holes at that, as you won’t get much more than paracord through them. As mentioned, the edges of the tang are proud of the scale but not so much as to cause any hot spots.

Both knives are drop-point designs, with the large knife being hollow ground and sporting a gut hook. The small Finesse is a full-flat-ground drop point. Texturing on the rubber grips helps provide a good, solid purchase. Of the two, as you would expect, the small detailing knife is pretty agile, though it isn’t like the large one is clumsy. To tote them both Gerber provides a dual-carry nylon belt sheath with plastic liner inserts.

Overall, the knives are quite well made. The design cleans up easy. After you do some work to bump up edge performance, you’ve got some users.

I have never been much for gut hooks. I remember when the Wyoming Knife was new and loads of hunters were sold for life on gut-hook knives. Even though I don’t use them, I can see how some hunters could like them. The gut hook on the Moment is pretty large.

I would have to give the set a thumbs up. It would be good for a hunter on a budget or one looking to try out different styles until finding one that suits him best.

MSRP: $34

Outdoor Edge Razor Guide Pak

razor guide pak
Some of the extra blades you get in the Outdoor Edge Guide Pak Razorbone include a selection of drop point, gut hook and boning/fillet patterns. All are neatly store in the waxed canvas roll. Blade steel: 420J2 stainless.

The Outdoor Edge Razor Guide Pak comes with two knives—the RazorBone and the RazorCape—along with a small bone saw. The knives take replaceable razor-blade-style inserts. Both are folders and come with multiple replacement blades. 

Outdoor Edge provides a boning/fillet-style blade along with a drop point and gutting blade for the RazorBone. For the RazorCape knife, you get two cape-blade inserts. Both have glass nylon and TPR rubber inlay handles.

A lockback system secures the blades in the open position. The handles don’t have a lot of cross-sectional contouring and the texturing on the rubber inserts provides some traction to your grip. There’s a thumb groove with jimping on the spine of the blade holder.

What worked well for me was the difference in thicknesses between the blade holder and the blade gave me a great lip to secure my handhold while executing a pinch grip. As I used the RazorBone in a butcher grip, the thin tip of the insert snaked through joints and kept me close to the bone so that I didn’t leave any of the good stuff behind. 

The RazorCape knife works well but has a large choil. I find such choils a waste of potential edge length. As if that isn’t bad enough on a hunting knife, they basically become a fur catcher. Both folders come with a pocket clip, though for me they are not pocket-carry-style knives. All the inserts come scalpel-sharp, so show them respect while handling them.

Lastly, the Flip n’ Zip saw works well but the anodized aluminum handle doesn’t do a lot for me. It makes a nice, thin package. A lockback system securely holds the blade in place. It’s just that the aluminum handle, even with CNC grooves, is thin and pretty slippery in my hands once things get wet. 

Also, the handle is so thin it makes it a bit difficult for my fat mitts to hold onto it. I would hate to try it with gloves on while the handle is covered in blood. The extra blades, all 420J2 stainless steel, are stored in a wax canvas roll. 

MSRP: $99

Knives Of Alaska Bobcat Combo

Alaska knives
Knives of Alaska includes a top-notch leather sheath with the Bobcat Combo. The sheath has the hallmarks of solid craftsmanship. (The author indicated he put the nick there.)

The set from Knives of Alaska (KOA) comes with the Alpha Wolf knife and the Bobcat Hatchet—hence, the Bobcat Combo. I’ve used the Alpha Wolf before. It’s a full-tang design made of D2 tool steel and a layered polymer handle. The handle contouring includes four finger grooves, with the index groove on the ricasso. It is a straightforward, fully flat-ground drop-point design.

The Alpha Wolf comes shaving sharp out of the box and has a general curve to the cutting edge. I have to say as a game knife it handles well and you can exert a great deal of control over the cutting edge with little effort. 

The design fits well in my meaty hand and the cuts get made where I need them without struggling. At the rear of the edge is a micro choil and, as usual, when the material being cut gets hung up there, it frustrates my workflow. I would say the only thing I would prefer is a bit of texturing to up the grip game.

As you can imagine, the Bobcat hatchet does things like splitting the sternum, cutting the pelvic bone and, if you want, it will bust out some of the tougher joints. It doesn’t have the heft of a full-size hatchet but as my buddy is fond of saying: if you put enough force behind anything you can make it fly. To me, it would be certainly neater than a chainsaw (don’t ask, it’s a drunken Canadian hunter thing). A gut hook is on the back.

A top-notch-made leather sheath carries the combo. I never reviewed a knife from KOA on which the leather wasn’t well executed. It’s a good combo and the Bobcat hatchet is such a neat tool I couldn’t resist using it in the kitchen as a small hand chopper. I know, somewhat sacrilegious, but it’s my kitchen. It’s a great set and as much of a trophy as the game you kill. 

MSRP: $209.99

There’s a wide range of knives here from budget to bang and represents only a small sampling of the tools available to hunters these days. If you’re going for the big game, don’t ruin the moment by struggling with a poorly crafted tool. Take the time to round out your kit with a good field-dressing knife set.

Read More

Flip Out: Four Balisongs To Trick Out Your Collection

Known By Many Names, The Balisong Is A Flipper’s Favorite Knife. These Four New Balis Are On The Cutting Edge Of The Style.

The balisong presents knife manufacturers with an excellent opportunity to express their design creativity and material preferences in a style that promotes pure enjoyment among flipping enthusiasts.

Long popular amid the knife-buying public, the balisong—aka bali, butterfly knife or simply butterfly—is a favorite of those who appreciate its mechanics, good looks and the sheer fun of flipping. With safety in mind, the manufacturers whose stock in trade includes the balisong provide new and innovative models on a regular basis. 

Along with these, training versions are often available, while seminars, videos, instructional courses, and online conversations are always at hand for those learning to use the balisong for the first time, as well as seasoned veterans who want to broaden their horizons.

Squid Industries Krake Raken Bowie V2.5

Lucas Cao, president of Squid Industries, is excited with the performance of the company’s Krake Raken Bowie V2.5. 

“It’s wonderful that everything about it is highly optimized for the best flipping experience possible,” he said. “Some notable special features are the machined handle texture and its unique balance profile. The mechanism is a combination of stainless-steel bushings and phosphorus bronze washers. What makes the bushings special is we manufacture them in-house on our own Citizen Cincom L12 Type 7 Swiss lathe with extreme precision. Our expert assemblers use the bushings to then create the glassy smooth swing that the Krake Raken is known for.”

The Krake Raken is available in both live and training versions, allowing users to become familiar with its operations without the worry of an injury, according to Cao. And reliability is a watchword from the factory floor to the buyer’s hand.

“All of our balisongs go through rigorous testing across a long period of time and with many different users,” Lucas explained. “Balisong flipping is highly subjective, so we make sure that the feedback we gather is from both beginners and experts inside and outside of the organization. While Squid Industries has several top-tier flippers in our own ranks, we also work with top flippers around the world to hear their thoughts on our latest developments.”

An accomplished flipper in his own right, the Squid boss sees customers in the balisong universe always on the lookout for excellent ergonomics, grip, balance and durability. The ideals are addressed at Squid with continuing revisions and upgrades to its balisong line that are generated through robust customer feedback. 

Finding Squid in the marketplace is easy, and its commitment to the education and popularization of the balisong is evident in its sponsorship of the West Coast Flipping Championship, a 32-person-event live competition held each year at BLADE Show West. In addition, YouTube is well stocked with flipping and maintenance tutorial videos.

Knife Specs

Blade Length: 4.5 inches

Blade Steel: AEB-L stainless

Blade Closure: Latchless design

Handle Material: 7075 T651 aluminum

Weight: 4.33 ounces

Closed Length: 5.625”

Country of Origin: USA

MSRP: $284.99

Premium Alpha Beast Kukri

The Premium Alpha Beast Kukri is the latest from Bladerunner Systems and is another example of the continuing outreach the company provides relating to balisongs. 

“Spreading the word has been part of our primary focus,” commented Bladerunner’s Edward Anthonis. “We have been active in the community, hosted online tournaments, provided video content, and partnered with retailers to spread the word about balisongs and what a fulfilling and amazing hobby and sport it is and has become.”

With the Premium Alpha Beast Kukri, Bladerunner puts its best foot forward. 

“What makes any knife transcend being just a knife will always be the attention to detail given from a maker or designer that truly understands what makes a purpose-driven knife the best in actual application,” Anthonis remarked. “Our balisongs are built not only to be great knives but also to be great for balisong manipulation.”

The bushings of the Premium Alpha Beast Kukri are something special, and Edward says they are an integral component of most Bladerunner folding knives. 

“We use bushings in most of our knives, and we find the action of a balisong on bushings works best for the intended application,” he stated. “Having the critical dimensions of a balisong in place combined with a well-tuned bushing system makes for the best flipping experience.”

For Anthonis and company, testing is always a part of a quality manufacturing process, particularly since he and co-owner Lawrence Ho are flippers themselves. 

“Since we both flip and have our feet firmly planted in the balisong community,” Edward related, “we can test the products and also get them into the hands of other flippers to solicit their feedback.”

KnifeSpecs

Blade Length: 4.5 inches

Blade Steel: 154CM stainless

Blade Closure: Latch

Handle Material: Titanium

Pocket Clip: Yes

Closed Length: 5.375 inches

Weight: 5.3 ounces

Country of Origin: USA

MSRP: $439.99

Kershaw Moonsault 5050

“Our butterfly knives utilize four KVT-ball bearing systems,” explained Dominic Aiello of Kershaw/Kai-USA. “On each side of the two pivots is a ring of ‘caged’ ball bearings that enable the blade and handles to move quickly and smoothly.”

So it is with the Kershaw Moonsault 5050. Customer appreciation and response to knife offerings help move the company forward, and with its latest balisong the reviews have been quite positive.

“When we develop our butterfly knives, our goal is simple,” Aiello related. “We want to offer a high-quality USA-made product that is affordable and fun for everyday knife users and flippers. With that said, smooth flipping, comfortable handles, and good weight balance are keys with butterfly knives.”

For beginners interested in learning more about the fun of flipping, Kershaw offers the Lucha trainer. It closely replicates the size, weight and design of the original Kershaw Lucha bali.

Knife Specs

Blade Length: 4.6 inches

Blade Steel: 14C28N stainless steel

Blade Closure: Latch

Handle Material: Stainless steel

Weight: 6.1 ounces

Closed Length: 5.65 inches

Country of Origin: USA

MSRP: $249.99

Benchmade 85 Billet Ti Balisong

The Benchmade 85 Billet Ti Balisong is the product of modern technologies, processes and materials applied to a very traditional knife, says Vance Collver, company director of product line management. The knife’s best attributes include smooth, consistent action, and those who experience it are the best judges of that slick performance.

“If a balisong has any drag or ‘sticky’ spots in the rotation, it can affect timing during flipping,” Collver reasoned. “Durable materials—think about how often these knives get dropped when flippers are learning or trying out new or complex tricks—and style since it must look good too, are important factors. A balisong must be ‘cool,’ solid and function flawlessly.”

Benchmade folks take pleasure in walking customers through basic, fundamental flipping techniques at shows and various customer interactions, and several balisong enthusiasts and experienced flippers on staff at Benchmade put the company’s new product offerings through their paces.

“This knife is not available in a trainer version and is intended for experienced flippers or collectors only,” Collver advised. “Balisongs are part of our DNA at Benchmade. Our company was founded in the pursuit of the balisong, and to this day our logo remains a butterfly harkening back to our origin.”

Knife Specs

Blade Length: 4.4”

Blade Steel: CPM S30V stainless

Blade Closure: Latch

Handle Material: Titanium

Weight: 5.28 ozs.

Closed Length: 5.6”

Country of Origin: USA

MSRP: $750

Read More

What Makes The Perfect Pocketknife?

0

Decades ago in America the pocketknife was universal, with such patterns as the barlow, stockman, trapper and folding hunter well represented in the pockets of our fathers, grandfathers and great-grandfathers. But what about today, when the most likely pocketknife task is opening an Amazon box or trimming a string off a shirt? To find out not only what folks are carrying but why, BLADE® asked several industry insiders, “What makes the perfect pocketknife?”

Pocket Knife Funtionality

Let’s begin our hunt with a look at the past. Many BLADE readers know Joe Culpepper for his and wife Kristi’s knife handle material business, Culpepper & Co. For many years the Culpeppers have provided the knife industry with quality jigged bone, Sambar stag and other exotic materials. Joe is also a student of the slip-joint/traditional pocketknife in all its variations, and sells vintage knives under the business name of Old School Knife Works.

Pocketknife fish
A Case knife in damascus is in the traditional fish knife pattern, an early folding fillet knife. (Old School Knife Works image)

“A good pocketknife first and foremost should perform and function reliably in the way it was designed,” he began. “Whether we’re talking about an electrician’s knife, fish knife, melon tester or trapper, the most important thing is that it does its job.”

Pocketknife melon tester
The melon tester pattern, here in an advertising knife configuration, almost always has a long, thin single blade. (Old School Knife Works image)

It has been a while since I used a knife to test a melon and Joe, too, was quick to acknowledge that many of the knife tasks of yesteryear have fallen by the wayside. “Frankly,” he admitted, “many of our pocketknives are simply just really nice box cutters.”

Pocket Knife Blade Size

Sticking with the nice box cutter theme, Knafs co-founder Ben Petersen added that he likes knives suited to the “dad life”—cutting apples cleanly without splitting them, opening boxes and whittling the occasional stick. “I’m not out to stab people,” he grinned. “For me, I think a 2.9-inch blade is perfect. Being under 3 inches keeps you safe from most restrictive knife laws, and it also is the perfect length for the finger test.” Ben went on to explain. “Most of the time when I cut, I put my index finger along the spine of the blade,” he noted. “I want the point of the blade right in the middle of my fingertip where it won’t cut me, but also gives me very precise control.”

Pocketknife medford
Medford Knife & Tool offers a range of titanium framelock folders, including the Praetorian T in CPM S35VN stainless blade steel. Weight: 9.3 ounces. Closed length: 4.9 inches. MSRPs start at $785.

Ben had a fun take on the perfect knife. “You know,” he reflected, “to a 12-year-old a gas station knife* is perfect. The perfect knife is totally different to everyone.” I smiled, remembering how much joy my 14-year-old son got from a rusty Bass Pro Shops framelock, missing a screw, that we found in a pasture on a dove hunt.  

Types Of Pocketknives

Most of us BLADE readers probably already have a good idea of what we like in a pocketknife. We know if we like small ones or bigger ones for everyday carry. We know the steel types we like, and whether we prefer a single or multi-blade. Joe offered some generalizations that match my experience.

Tradional

Hobo
Another older Case edition, the hobo knife features a blade and fork in a handy pocket-sized folding knife. (Old School Knife Works image)

“As we get more into knives we tend to evolve into one of two categories, and they’re often correlated with age,” he reasoned. “The older generation tends to go for the more traditional slip joints with natural materials and carbon steel like their dad or grandad carried.” 

Joe considers some “classic” patterns and brands among his favorites, particularly the knives manufactured pre-1970 by the old American firms that mostly have gone out of business. “When you hold an old Schrade, Empire, Robeson or even a vintage Case you get a certain sense of nostalgia,” he noted.

Modern

Pocketknife hinderer
Jordan Wagner said the market is strong for high-quality USA-made titanium framelocks. Among those fitting the niche is the XM-18 3.5 flipper folder from Rick Hinderer Knives. Closed length: 4.75 inches.

As for the other category, Joe finds that younger folks tend to lean toward modern conveniences like pocket clips, modern steels and the more tactical types of knives like Benchmades. Being just a bit on the older side myself, as well as a bit of a traditionalist, I reached out to Jordan Wagner at DLT Trading for some thoughts about what makes a “perfect pocketknife” from a modern point of view. 

From an online merchant’s perspective, he said the market is very strong for quality USA-made framelocks. Titanium framelocks from makers like Rick Hinderer Knives, Chris Reeve Knives, Medford Knife & Tool and custom knifemaker Les George in the $400-to-600 price range continue to be popular. 

Knives in the modern category tend to have a few common characteristics. They feature premium blade steels. They all have some kind of one-hand-opening device such as a thumb stud, blade hole, flipper tab, etc. In general, these are mid-tech production or small batch customs made in shops as often as in factories. The next level below the mid-techs are the larger-batch manufactured knives by companies like Zero Tolerance, Spyderco and Benchmade. They’re often high quality, built in factories to tight tolerances and most often made in the USA.

Often within these and other brands are quality, lower-price-point knives made overseas as well, such as the production Demko AD 20.5 made in Taiwan. There are also quality knives made by China-based companies like Reate, WE and its sister brand CIVIVI and others.  

Case remains the leader in the current production of traditional patterns. But is it because there’s a demand by knife users for a two-blade trapper? Maybe, maybe not. The folks at Case know and understand that there are two big segments of customers that they serve—users and collectors—and they make patterns to please both groups.

The Perfect Pocketknife?

I think about “perfect” in terms of pragmatism. When was the last time the average knife user needed a hobo knife with a fork? Have you ever seen a titanium framelock melon tester? Culpepper has his finger on the vintage-slip-joint market, and his take is that the rise of social media has opened up huge new audiences to the vintage knives.

“The unique patterns always have a market and a strong following,” he said. “For the unique vintage knives there’s good demand, whether they’re made in the USA or even England or Germany.”

More On Pocketknives:

Iconic Spyderco Design Appears On New H.L. Dalis Exclusive

Spyderco unveils a limited-edition Para Military 2 with a cut-through Statue of Liberty blade to honor H.L. Dalis Inc.’s 100th anniversary. Just 1,200 knives available—collectors take note.

Spyderco has made its first “cut-through” blade design since its highly collectible Q, R and S series from roughly a quarter century ago to celebrate the 100th anniversary of H.L. Dalis Inc.

The cut-through graces the blade of a Para Military 2, including perforations both of and flanking an engraving of the Statue of Liberty. “As a New York company, we thought the Statue of Liberty cut through was appropriate,” stated Jon Blumenfeld, president of H.L. Dalis Inc., “as it is the most universal symbol of what the USA stands for.”

There will be 1,200 units in all, with delivery expected in the late third quarter of this year. As an added special feature, Spyderco has agreed to have its design team sign one box for every 50 units, and H.L. Dalis will include one signed boxed unit at standard volume cost with every 51 units—50 plus one signed boxed unit—ordered by its dealers.

Para Military 2 Specs
Blade length: 3.45”
Blade steel: SPY27 stainless
Blade grind: Full flat
Edge configuration: PlainEdge
Lock: Compression Lock
Hardware configuration: Stainless steel pocket clip, standoffs and liners
Weight: 3.8 ozs.
Closed length: 4.82”
Knife to know: Made in a limited edition of 1200
MSRPs: $340

Custom Knives:

Pull Of The Push Dagger

Master smiths explore the symmetry, skill and survivalist roots of a classic.

It’s part adventure with a bit of notoriety and a dash of creativity. For the modern custom knifemaker, several styles are brought to life with history in mind. And the push dagger is one of them.

Maybe seldom seen, but always intriguing, push daggers trace their lineage to a bygone era when self-defense at the card table or on the street meant quick deployment from a vest pocket. For sure, that perspective spurs some custom makers to insert the push dagger into their repertoire while the stylized and subtle blend of blade and handle combine for a unique test of shop skill.

“They’re a backup tool,” explained ABS master smith and BLADE Magazine Cutlery Hall-of-Fame® member Steve Schwarzer. “They were typically carried in the 1700s and 1800s along with a one-shot pistol. After that shot, the push dagger was the next position. It’s been around for a long time as an extension of your arm with a blade, and it is hard to take away from somebody that is skilled in its use.”

Schwarzer’s featured push dagger with stag handle and evocative faces carved on both ends is 5¾ inches long with a 3¾-inch blade of mosaic damascus steel. He has actually made two push daggers in this style and designed another for Benchmade about 20 years ago. “For me, they’re fun, and that’s why I like to make them,” he commented. “I’ve always had a fascination about them and adapted my martial arts background to training with them. The design traditionally is with a very short blade, and in martial arts, it has to do with the alignment of the hand and arm bones, along with the shape of the blade, which is double-edged traditionally. Everything in nature is curved for an effective cutting surface.”

Harvey Dean Tejas

Why a push dagger? Harvy Dean (inset) puts it succinctly, “They’re just cool.” That certainly holds true for his Tajas push dagger, with an elegant feather damascus blade, 24k gold raised vine work and a fossilized walrus tusk handle. At 16 1/2 inchces in length, Dean gave himself plenty of knife to decorate. (SharpByCoop image)
Why a push dagger? Harvy Dean (inset) puts it succinctly, “They’re just cool.” That certainly holds true for his Tajas push dagger, with an elegant feather damascus blade, 24k gold raised vine work and a fossilized walrus tusk handle. At 16 1/2 inchces in length, Dean gave himself plenty of knife to decorate. (SharpByCoop image)

Legendary master smith and Hall of Famer Harvey Dean enjoys the historical aspect as well. “They’re just cool,” he offered. “A lot of people made them back years ago, and there was the idea of concealing them in the vest. Some were made with nickel-silver scabbards and called lapel knives because they were pinned under the vest or coat lapel.”

Dean’s pictured Tejas push dagger is a departure from standard sizing, with an overall length of 16¼ inches, with an 11-inch ladder pattern damascus blade and handle of fossilized walrus ivory. But then, everything is bigger in Texas.

“I’ve always liked [master smith] Larry Fuegen’s push daggers, and his work has had a lot of influence on mine,” Harvey said. “You really make them like any other knife, and I usually do around two or three a year. I like to use ivory and damascus and a stag handle is next up. I don’t do many plain ones, and most of mine are with two-piece handles. As far as marketing is concerned, you’ve got to have that special person who likes them–but they do usually sell quick.”

Hawks Nest Custom Push Talon

Matt Hunter (inset) has always had a thing for concealed carry knives, but admits his mother-of-pearl handled push daggers were his first crack at the style of knife. Angular and wickedly attractive, the Nichols Slither Armor Core stainless damascus daggers were designed as a matching set with his HawkWing knife, also pictured. (SharpByCoop image)
Matt Hunter (inset) has always had a thing for concealed carry knives, but admits his mother-of-pearl handled push daggers were his first crack at the style of knife. Angular and wickedly attractive, the Nichols Slither Armor Core stainless damascus daggers were designed as a matching set with his HawkWing knife, also pictured. (SharpByCoop image)

Damascus blade, mother-of-pearl handle and variations on the push dagger theme highlight Matt Hunter’s work at Hawks Nest Customs. He is a huge fan of concealed carry knives and started down the road with a boot dagger, neck knife and then his Push Talon.

“I think any dagger is challenging due to the symmetrical grinds that are required,” he noted. “You’ve really got to nail each and every one of them or the entire build needs to be scrapped. These push daggers are made with Nichols Slither Armor Core stainless damascus and mother-of-pearl on Westinghouse black canvas Micarta liners.
“Believe it or not, these were my first push daggers,” Matt added. “These were originally made for a customer to match the HawkWing, which is also in this photo. I told him I was planning on doing a pair of matching push daggers, and he asked if we could do the mother of pearl to match his knife. So, I obliged.”

Zack Jonas Totem

A study in starkness, Zack Jonas’ Totem push dagger grabs the eye with its clean lines and depth of damascus. That’s a san mai steel with laddered W’s and faces in a 1,000-layer laminate with pure nickel. Adding to its Spartan charm are its gold handle accents. (SharpByCoop image)
A study in starkness, Zack Jonas’ Totem push dagger grabs the eye with its clean lines and depth of damascus. That’s a san mai steel with laddered W’s and faces in a 1,000-layer laminate with pure nickel. Adding to its Spartan charm are its gold handle accents. (SharpByCoop image)

The Zack Jonas push dagger featured is his Totem model with a blade length of 4 inches and an overall length of 6½ inches. Its gold handle accents complement a san mai steel with laddered W’s and faces in a 1,000-layer laminate with pure nickel.

“The push dagger is one of the few knives that is actually designed to be folded into a tightly closed fist,” the master smith explained. “That means you have to make sure the handle comfortably conforms to the shape of the human hand in that unusual position. A push dagger is not a particularly functional tool outside the very limited frame of hand-to-hand combat; if you don’t have a secure grip when you need it, you’ve got a real problem.

“There are few makers that come to mind as design influences,” Jonas concluded. “[Master smith] J.D. Smith’s early influence on my career is never far from my hand or eye. I also think of Peter Johnsson’s work as I’m designing. He has never done a push dagger that I’m aware of, but I like to try and channel the way he conducts tension through his lines. Peter and [master smith] Kevin Cashen both come to mind when I think of the functionality in any dagger.”

Andrew Meers Rose Of Sharon

A bold mix of materials, Andrew Meers utilizes carbon fiber, stainless steel,  gold and a splintered mosaic damascus to bring-together this 9-inch push dagger. The centerpiece of the knife is its elegant Rose of Sharron engraving with the gold backing. (SharpByCoop image)
A bold mix of materials, Andrew Meers utilizes carbon fiber, stainless steel,  gold and a splintered mosaic damascus to bring-together this 9-inch push dagger. The centerpiece of the knife is its elegant Rose of Sharron engraving with the gold backing. (SharpByCoop image)

Andrew Meers included a push dagger in his ABS master smith set, which was complete with forged trout iron texture engraved with pangolins. “Push daggers have a place in my childhood memory,” he related. “I remember seeing one at a museum and being fascinated. In retrospect, I think having mostly seen conventionally handled pieces in media and collections, the manner in which the hand engages the handle is what is attractive to me.”

Meers’ featured push dagger is his first with a carbon fiber handle and a groove in the blade. Its 7-inch damascus blade is framed in stainless steel, and the engraving depicts the Rose of Sharon with a gold-plated relief background. The entire push dagger is 9 inches long. Andrew produced his first push dagger in 2014 and has made several since. His longest measured between 23 and 24 inches.

Jean Potvin Romanesque

Since push daggers are illegal in Jean Pierre Potvin’s homeland of Canada, he had to come up with a clever trick to get his his Romanesque push dagger past airport security and to a buyer at a show in Las Vegas. His solution, remove the illicit handle and replace it with a toilet plunger handle. (SharpbyCoop image)
Since push daggers are illegal in Jean Pierre Potvin’s homeland of Canada, he had to come up with a clever trick to get his his Romanesque push dagger past airport security and to a buyer at a show in Las Vegas. His solution, remove the illicit handle and replace it with a toilet plunger handle. (SharpbyCoop image)

“This push dagger is Roman in style,” remarked Jean Pierre Potvin. “It came about quite by chance. I rarely design in advance when I create. I prefer to let my imagination run free and follow new ideas that present themselves during the making process. During the making, I saw that it had a somewhat Roman style, and I continued in that direction with this result.”

Potvin’s push dagger measures 8 inches overall with a 4½-inch blade of damascus in 15N20 and 1084 carbon steel. The handle is fashioned from stabilized walnut burl and brass furniture. He had previously made only one push dagger. That was in 2022, and it was much smaller. “I had a buyer at the Nashville knife show,” he remembered, “and I had packed it in my luggage to take there. But when I got to the Montreal airport, it was confiscated by airport security.”

Since push daggers are illegal in Canada, that experience inspired Jean Pierre to remove the actual handle and replace it with a toilet plunger handle the next time he traveled with a push dagger. He made it to Las Vegas that second time and reattached the original handle after arrival. “It’s really funny because it’s the same dagger, but having a cross handle makes it illegal,” he smiled. “Sometimes you have to use tricks to get what you want.”

Somehow, the push dagger and its adventurous history seem to fit right in with Potvin’s novel experience.

Check Out More Cool Customs:

First Look: Buck 841 Sprint Pro

The 841 Sprint Pro Is Yet Another High-Quality Knife From Buck That Can Be Your Trusty EDC For Decades With Ease.

Buck makes good knives, and the new 841 Sprint Pro is no exception. There’s nothing timid about this knife.

The 841 Sprint Pro has a blade just over three inches long made from a durable, corrosion resistant S30V steel hardened to a 59-61 HRC. The satin-finished drop point has a full belly, helping it stand up to more intense tasks than many other comparable EDC knives on the market.

It’s fun to use thanks to the flipper on top of the knife and a linerlock that keeps everything firm when deployed. 

There are two types of handle materials you can choose from. There are two Micarta options, tan canvas and burlap, and there is also a version with a carbon fiber handle that is more expensive. 

The one knock against the blade is that the material is difficult to sharpen at home and may need a professional’s hand. That can be a turn off due to the added cost.

Overall, this is a quality knife. Buck has once again elevated a tried and true EDC into something more than its constituent parts and something that you’ll proudly show off for years.

MSRP: $164.99 (Micarta versions)/$214.99 (carbon fiber version)

Read More

Micarta: A Do-Everything Handle Material

Micarta Is One Of Many Materials Used For Blade Handles. Used For More Than A Century, Micarta Continues To Be Incredibly Popular.

Micarta is not a new material, in fact, it has been used for over 100 years. Unlike naturally-occurring materials, Micarta offers properties other materials don’t. We’re going take a look at what Micarta is and what makes it probably the best material available for making knife handles today. 

What Is Micarta?

Micarta is the name of a commercially-owned product, and isn’t just a generic material. Micarta is a durable type of composite made of a base material suspended in epoxy resin. Norplex Inc. owns the trademark on the term.

The material is compressed under heat and is classified as a thermoset product. The main name associated with the invention of Micarta is George Westinghouse. During his life, Westinghouse never stopped creating new things, and the first developments of what we know now as Micarta occurred somewhere between 1900 and 1910. 

Because of the way that Micarta is made, it has extensive applications for insulation in electrical systems. It is unknown when this material became a popular knife handle option, but it is safe to say it’s never been more popular than today. Like many materials of the era, such as Bakelite and Celluloid, Micarta found its way into craft use.

How Is Micarta Made?

It’s hard to pin down Micarta. In the old days, fabric and paper were used as the base material, but today we have a wide variety of other types that exist, including carbon fiber and glass. Knife handles are actually a fairly narrow category of end-use for Micarta.

The process by which Micarta is made is relatively simple. Materials are soaked in whatever type of thermoset is going to be used, and, once impregnated by the resin, it is subjected to intense heat and pressure which causes a sheet to be formed. Decades ago, Micarta was also made in large blocks. 

These large blocks are a favorite for revolver grips and other large, three-dimensional forms. There are people that shop garage sales and estate auctions looking for fixtures or items made using these older types of Micarta. The most prized is a type of paper Micarta that is about the closest thing to elephant ivory in terms of texture and color that grip makers can get.

Who Uses Micarta?

Mini knife makers that work with the material end up ordering large quantities to their specifications. Smaller companies tend to work with what is available through existing supply chains, which is a large reason why you end up seeing very similar colors across the board. 

It is possible to get Micarta in custom colors and textures, though you may have to spend thousands to get it. If you find that you are looking to put a nice handle on a knife, it is a good idea to call around and see if any companies have scrap that they are willing to sell.

Micarta Vs. G-10

True Micarta is not the same thing as G-10 or other types of thermoset laminates. Many people tend to use the terms interchangeably, but in a strict manner of speaking, true Micarta will be made using paper, burlap, canvas, or linen set in resin. G-10 is different in that uses glass cloth, a type of material made from carbon fiber filaments. 

Micarta is usually heavier than G-10 and carbon fiber laminates, but, in terms of knife handles, the difference is negligible and is not too far apart from the weight of standard hardwoods. Bakelite, while common on a tremendous number of products and weapons, isn’t the same type of material as Micarta even though it occupied many of the same roles. 

Comparing Micarta To Other Handle Materials

As Micarta has become more popular, more companies have offered it as an option, but sometimes incorrectly. A true Micarta material is not quite as durable as G-10, but it is going to hold up better than wood or leather. G-10 is an essentially absorption-proof material. Most handle materials out there, Micarta included, will absorb a degree of water, sweat, or blood. 

Though it is unlikely to permanently stay in the material, it is recommended you keep Micarta clean. Usually, hot soap and water does the trick, and, while you can get oil on it, expect it to stain a bit. This has to do with the fact that the materials in Micarta are either paper or fabric, and many of these materials are exposed, though fully impregnated by resin.

Wood handles are subject to small problems, and if installed incorrectly, they can split or crack quite easily. Wooden handles are not especially great for heavy outdoor tasks, such as chopping or batoning. Wood also has the problem of absorbing ambient moisture. In especially humid environments, handles can swell and crack on the pins. Micarta has no grain in the way that wood does, although it is typically applied to knives along its length.

When comparing Micarta to carbon fiber it comes down to durability and weight savings. Carbon fiber is not an especially durable material, though it is very lightweight. As far as knife handles go, carbon fiber is excellent for inlays and panels, though it is not as good of a material for making full scales. When compared directly to Micarta or G-10, carbon fiber is harder to shape and is more difficult to apply a working textured finish. 

Best Knives With Micarta Handles

Linen and canvas Micarta is my hands-down favorite material for knife handles. The reason I find these types of Micarta the best is that they provide the greatest degree of function in the hardest environments. I like G-10, but I have found it too slippery across the board when covered in blood and fat out hunting and it becomes ice cold to the touch very quickly. While it is a very durable material, it feels much more like plastic than Micarta and, for lack of a better way of saying it, never develops the character like wood, leather, or Micarta. 

Linen or canvas Micarta offers the texture I want on a grip across the board, and I have put several products through an insane amount of daily use without any negative effects. Each of these knives I list here I have used for months or years, and I can strongly recommend them. 

Winkler Utility Knife

winkler utility knife

The utility knife was the first Winkler I ever owned, and it is still a constant companion. I have used this knife extensively for everything from opening paint cans and cutting heavy-duty straps to prying apart pallets and even building out countertops and interior demolition. 

I have logged hundreds of hours with this knife in hand and it has been extremely comfortable the entire time. The green Micarta handle has held up extremely well, though it now has some gouges from use. It is not on the cheap side, retailing at $450, but it has been worth every penny. 

Case/Winkler No.6

case winkler #6

A collaborative project between Case Knives and Winkler, the recurve utility No.6 is a heavy-duty knife built for some of the hardest projects. I have taken this knife with me out to the field and have also lent it out as a skinning knife for deer hunting. 

Due to its deep, recurve belly it is exceptional for chopping tasks and is just as good in the kitchen as it is blasting through small limbs. While no longer available on the Case website, my version has a tan canvas Micarta grip and it has held up exceptionally well. While it’s not contoured exactly to my hand as I have experienced with knives direct from Winkler, it feels good in its own right and will provide a lifetime of use. The MSRP is $430. 

White River Knife And Tool FC7

White River FC7

An extremely attractive, large knife, the FC7 is my go-to hunting knife for deer. While it may seem like a large knife, my experience in the field has taught me that it is probably the best big-game knife money can buy today. It is gorgeous to look at and the orange liners on the green Micarta definitely add to it. I see no reason why I will not continue to get years and years of use out of this product. The MSRP on the FC7 is $330.

White River Knife And Tool Exodus 4

White River Exodus 4

The Exodus 4 is the knife that I use in the kitchen every day for almost all tasks. It is probably the most washed knife on this list. It has been constantly exposed to soap, oil, and all other manner of kitchen materials. It makes an excellent carrot peeler using the square edge of the spine. 

My version has black Micarta panels, and they have held up extremely well to the constant washing and use. This knife and its grip have arguably been exposed to more caustic materials across-the-board than any of the other products, it was even put through the dishwasher several times by accident. The Exodus 4 is easy to hold even while in the direst of kitchen nightmares. The MSRP is $175.

ESEE Camp Lore RB3

ESEE Camp Lore RB3

The knife itself had some shortcomings. The steel is sharp but requires maintenance, and it is not very resistant to blood. My original version of this knife has been discontinued, Esee has a dimensionally identical, but cosmetically different, version for sale now. The MSRP on that knife is $190. 

I don’t remember what the Camp Lore version cost many years ago, but it has held up to my abuse. The grip panels are Micarta, and they have seen more than their fair share of punishment. The blade shape was less than ideal for working on four or five deer in a night, and I quickly learned my lesson and moved to a bigger knife. I will say that in the years that I used this knife, it was a good friend for the field, and I look forward to passing it on to my kids when they are older.

Read More

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement