Knife Collecting

Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.

A.G. Russell Chute Knives: A Quick History

Harry Archer is no stranger to fans of BLADE Magazine Cutlery Hall-Of-Fame® members Bob Loveless and A.G. Russell, as well as followers of Steve Johnson, Bob Dozier and other inhabitants of the custom knife scene. A larger-than life “operator” for the CIA, among others, Archer designed the chute knife, a fixed blade that got its name for use when a parachutist landed in a tree or in some other sticky situation and needed to cut the shroud lines to free himself.

Archer fell in love with Loveless knives and designed a chute knife that Bob made. In the process, Archer and Loveless became close friends and the chute one of Bob’s best-known knives, one reproduced today by scores of custom makers.

A.G. and Loveless had a special relationship, so it should come as no surprise that A.G. became friends with Archer as well—and neither should it come as a revelation that A.G. saw the potential for reproducing a chute knife. In fact, as it turns out, A.G. Russell Knives wound up ordering three different chute repros.

There are great similarities between A.G.’s chute knives and those by Loveless, but also differences. For one, A.G. included a hole in each end of the double guard. Loveless did not. A.G.’s early A.G. Russell and Morseth chutes used narrow-tang construction with distinctly shaped, solid handles. Loveless’s were full tang with applied scales.

Dozier was the maker behind the first A.G. Russell and Morseth chute knives. Aside from a few changes, the Dozier design is much like the Loveless, including no holes in the guard, full-tang construction and the Loveless signature green Micarta® scales.

As A.G. wrote, “In the beginning, Loveless probably would have used A2 tool steel for the blade, and later 154CM and/or ATS-34 stainless. Dozier’s design uses Dozier’s signature D2 tool steel.” It also features one of Dozier’s solidly built leather sheaths.

From 2003-2007, A.G. offered a chute knife designed in collaboration with award-winning German knifemaker Dietmar Kressler.

Russell took Archer’s basic chute and “added as much elegance” as he could manage, “using the talents of that most talented maker [i.e., Kressler]. Dietmar is the master of integral hilt-and-butt [aka hilt-and-cap] hunting and combat knives,” A.G. wrote. “He has taken my design and executed it beautifully.”

Just 75 were made and the last one sold for $2,195. ”They are available today on the secondary market only.

After that, A.G. began work on a more economical drop-forged version of the chute. It took 10 years to get the tooling finished in Taiwan and the knives made. From the blade tip to the end of the pommel, the entire knife is drop forged of 440C stainless steel and has a “very tapered” tang.

“The standard model has ebony Rucarta® scales. Blade and overall lengths: 5.5 and 9.5 inches. MSRP: $245. With ironwood scales the MSRP is $295.

As Russell wrote, “Harry Archer could well have been the pattern for Mr. Clark, the ubiquitous CIA problem solver in Tom Clancy’s novels … He spent a lot of time in the jungle teaching jungle combat and survival to American soldiers and soldiers of other countries as well … He loved knives, well made knives. In his lifetime he was probably Loveless’s #2 or #3 customer. He was a strong influence on the design of custom combat knives and his design for the chute knife is classic.”

9 Tips for Buying a Custom Knife

Attend knife shows
To get that special custom knife, attend knife shows—and if you see a knife you want, don’t put it down until you’re through haggling! (PointSeven image)

Is it realistic to say there’s a surefire way to get any custom knife you want? While there are always exceptions to the rule, if you practice the following nine steps, you might just find that beautiful custom knife you’ve dreamed about nestled warm and safe in the fleece lining of your favorite zippered knife pouch:

  1. Attend the knife show(s) where the maker and/or owner of your dream knife exhibits;
  2. Introduce yourself to the maker/owner at the show, talk about his/her work and designs and/or knives, ask questions, and express your interest about the knife inside the show and/or at the hotel bar after show hours;
  3. Ask to look at and hold the knife—and don’t be afraid to tell the maker/seller what you will pay for it;
  4. On a high-end knife especially, it it’s worth it, buy it! You won’t sleep if you pass on the knife for a small difference in the asking price;
  5. If you see the knife you really want and pick it up at the maker’s/seller’s table, do not put it down until you’re finished haggling for it;
  6. If it’s a custom order, supply the materials for the knife directly to the maker;
  7. Visit the maker’s shop or the seller at an agreed-upon place and pay cash for the knife;
  8. In the case of the maker especially, tell him or her you will give the knife a great home and how you will display it, or how good the knife feels in your hand and how you will use it, and;
  9. Plan a pricing strategy to go with all the travel, conversation and luck that surround the big purchase. Have a figure that you will pay for the knife in mind beforehand.

“If the price is way over your head, then walk,” advised custom knife collector Chris Nolen, stressing that even though it may seem unorthodox, it is good to tell the maker how much you are willing to pay. “If the price is in the ballpark, buy the knife,” he concluded. “You will know when it’s that ‘special’ piece.”

 

Sal Manaro Bullseye Custom Knife

Features a compound ground CPM154cm hand rubbed blade, titanium liners and bolsters, silver twill carbon fiber scales, hand checkered backspacer and thumbdis…

Knifemaker to Watch: Phil Jacob

knifemaking phil jacob
Phil Jacob

Phil Jacob took home the Best New Maker award from BLADE Show 2017, which is as good as it gets for someone getting started in knifemaking. The achievement is also good news for knife collectors looking for a guiding light for their collections. “Best New Maker” translates to “best new opportunity” for ROIs on investment.

Jacob, who calls Kansas home, specializes in slip joint folders. The addition of exotic handle materials and attention to detail offset any cliches about this traditional style. Just take a look at the double-bladed trapper that made waves at BLADE Show.

best new maker blade show 2017

Specs:

  • Blade lengths: 3.125”
  • Blade steel: CPM 154 stainless
  • Handle: Stag dyed amber
  • Folding mechanism: Slip joint
  • Weight: 5.1 oz
  • Closed length: 4.5”
  • Maker’s list price for a similar knife: $875 to $1,100

Jacob maintains a healthy social media presence, which is another benefit to collectors interested in a commission or a resale. His Facebook page is full of status updates and photos. 

He’s not big on the video front yet, but here’s a sample:

And here are some photos of his recent work.

Best of all, you can meet him at this year’s BLADE Show. Get tickets here.

Today is Deadline to Stop Proposed Ivory Ban

An all-inclusive ivory ban that would target ancient ivory such as mammoth and mastodon in addition to elephant ivory likely will pass without your help by the end of day today, Dec. 27.

Draconian ivory ban would oust ancient ivories. (SharpByCoop photo)
A proposed ivory ban would include ancient ivory. Kevin Casey uses ancient walrus ivory on his bowie. (SharpByCoop photo)

A Presidential Advisory Committee that met on Dec. 16 recommends a total ban of ivory within the USA to the task force on Wildlife Trafficking. The ban would apply to the sale of all ivory in any form and include pre-ban and antique ivory in knives, guns, musical instruments, pianos with ivory keys, etc. The ban would affect collectors, makers and anyone who sells within or to the USA. The committee will file its report on Dec. 28, so any entreaties opposing the proposed ban must be e-mailed by no later than today in order to be registered and considered before the report is filed.

The address to send your email to is [email protected]. Copy and paste the following letter—though feel free to tailor it as you see fit—to an email, and email it to the above address:

Dear Advisory Committee,

I stand against a total ban of all ivory sales in the USA.

As called for in the Presidential Executive Order, I ask that the recommendations continue to allow for “legal and legitimate commerce.”

The ivory market in the USA is stable and/or declining, and seizure records indicate that a high proportion of the seizures were personal effects lacking the correct paperwork, not the so-called blood tusks reported on by the media. The Elephant Trade Information System (ETIS) analysis indicates that the amount of ivory by weight seized annually has not increased in recent years. We are not the consumers of the poached ivory. Therefore, banning ivory sales within the USA will do nothing to save the remaining world population of elephants.

The CITES MIKE (Monitoring the Illegal Killing of Elephants) September 2013 report analysis, page 64, states, “Africa’s elephant populations are managed sustainably,” and that in 2013 the quote for permits for legal elephants was 1,350 animals. There is legal trade that can be monitored with DNA testing and permitting. Enforcing and policing a ban would require funds that should be used to support the ban on imports already in effect.

I fully support CITES rules, closing international borders to elephant ivory trade, a law already in effect that should be fully supported and enforced. I stand against a total ban of all ivory commerce within U.S. borders, a decision that would be an enforcement nightmare. Like Prohibition of the 1920s, it would cause a new wave of illicit commerce where a legitimate one now exists. Museums, antique dealers, collectors, artisans and individual citizens have invested in a legal and valuable material. Sanctioned trade in ivory that is legal (culled and pre-ban) and comes from unthreatened sources (mammoth, boar, warthog, antique and recycled products) can pose no possible threat to elephant herds in the wild.

I believe our mutual goals are the same and a solution can be reached. Please keep the focus where it belongs. To increase the elephant population, the killing must be stopped in Africa and at its borders.

Respectfully submitted,

____________________________ (TYPE YOUR NAME)

 

Russian Spetsnaz Knives

0

For the first time, original Russian Spetsnaz knives are offered on American market. All these knives were handmade in Russia and passed rigorous tests by military Spetsnaz. Each knife has a unique identification number. Tough construction, great balance, and ability to stay sharp are just a few attributes of these special knives. The design and reliability make them very attractive to military personnel, hunters, and collectors.

4 Paring Knives for Mom

Editor’s note: All images courtesy of the participating companies.

Go-To Knives

Look up paring—as in paring knife—in the Merriam-Webster dictionary and ol’ Mr. Webster says it’s “the act of cutting away an edge or surface.”

This raises a question.

If the paring knife was originally designed as a peeling knife, does it still matter? Or is it relegated to the back of the flatware drawer, consigned to a future of rust and dust?

Chef Timothy Hollingsworth, who wears the double hat of chef and owner at the California restaurants with the respective names of Otium and Barrel and Ashes, said the scrappy paring knife—with a blade less than 4 inches designed for food prep—still holds its own against $5 peelers and glinting chef’s knives. Not only is a paring knife designed to peel, it can be called on to prepare pearl onions, scrape mushrooms and cut intricate designs to give food extra pizzazz.

“For the home cook,” Hollingsworth said, “paring knives are great because you’re able to hold the vegetables or fruit in your hand while cutting, whether that’s cutting potatoes into smaller chunks, or peeling an apple and cutting it into bite-sized pieces.”

Mother’s Day is around the corner, a time that seeks to honor the women whose varied accomplishment include making many a home-cooked meal, often with paring knife in hand. From contemporary to traditional, here are four designs that represent the latest in one of Mom’s go-to tools.

Kai Luna Paring Knife

Kai Luna paring knife

Kai Luna paring knife

It was about 10 years ago that Scott Zahm, director of sales for the housewares division of Kai USA Ltd., and other of his compatriots at Kai noticed people used paring knives as small utility blades, chopping a handful of parsley on a cutting board, for example.

“Many home cooks prefer a smaller knife that’s less intimidating and easier to control,” he said. Kai took to the drawing board with its Pure Komachi 2 and the resulting blade shape was wider than a traditional paring knife, with a deeper belly. The shape helped users navigate a cutting board with more agility.

This issue’s cover knife (page 7), the newer Luna Paring Knife, features the same profile. “We made the Kai Luna series for the adventurous cook on a budget,” Zahm said. The knife features a tsuchime, or hammered finish, and the edge is honed to a 16-degree angle on each side.

“All of the knives in the Luna series offer the performance good cooks demand at a price that even aspiring cooks can afford,” Zahm said. “With Luna’s tsuchime finish and contemporary styling, it’s an exciting and eye-catching addition to any kitchen.”

With a modified blade shape, does the paring knife usurp a chef’s knife in utility? Not really, Zahm said. Chef’s and paring knives work with each other, handling different-sized cutting jobs. Both are essential in the cook’s workspace.

Spyderco K09 Mini Paring Knife

Spyderco paring knife

Spyderco “thought small” when it redesigned the K09 Mini Paring Knife. The company still offers utility knives 4 and 6 inches long. However, Spyderco’s Joyce Laituri compared the K09 to a scalpel, giving users options from peeling fruit to removing small bones from meat.

“I use mine every year at Halloween to start the pumpkin carving process,” Laituri said. “We draw the face on a pumpkin and the K09 goes through gourd like a laser. It is easily controlled letting you create intricate and even lacy designs.”

Three years ago, Spyderco reintroduced the K09 with a new handle material. The Japanese-made knife features a polypropylene grip with ridges to enhance purchase with wet hands.

The K09’s 2.25-inch blade of MBS-26 stainless steel is thinly ground. The result is a blade that keeps its edge and has a slight spring to it, Laituri observed. When it comes to how often people should reach for a paring knife, Laituri said it depends on the cook. She often uses Spyderco’s 6-inch serrated utility knife. Her husband, on the other hand, barbecues and rarely uses a paring knife.

Fällkniven CMT Zulu

Fällkniven paring knife

“I believe the paring knife is one of the most used knives in the kitchen and also the knife with the lowest reputation,” said Peter Hjortberger, founder of Fällkniven AB. “Usually a paring knife is made for being cheap, a knife you don’t need to care much about, just a [semi] sharp edge for daily tasks.”

Fällkniven went in the opposite direction, making the 3-inch blade of the CMT Zulu of laminated COS steel, the core consisting of a stainless steel that contains a high percentage of cobalt. Hjortberger called it “technically, a very advanced steel.”

“So, instead of searching for the cheapest steel, we go for the best steel, understanding that this knife will last a hundred years or more,” Hjortberger said. “To me, this is climate smart to make high-quality knives which will last during several generations instead of uttering out crap.”

The knife is full tang and handled with Micarta. The CMT Zulu features an old-world design ground with a convex edge common on knives before the Industrial Revolution. It is made in Japan with Swedish materials and quality control.

Often, the paring knife is the most-reached-for kitchen tool, not just for cooking but also for common household chores. Paring knives are non-frightening, Hjortberger said, and women might like the more manageable design.

Case Paring Knife

Case paring knife

According to Case’s Fred Feightner, paring knives have homes in restaurants offering nearly every type of cuisine. In 2012, Case resurrected its paring knife offering, giving home cooks the option of a handle of black synthetic or walnut. With the walnut handles, brass rivets gleam from the wood. Case offers four paring knives in its Household Cutlery collection.

“We knew people would want their household set to be complemented by a paring knife or two,” Feightner opined. “Case paring knives have been a part of the American kitchen’s tool set for many years.”

Case manufactures paring knives with either a clip-point blade, where the clip drops to the gently curving edge, and the spear-point, where the spine and edge meet in an acute tip. Both are made from Case Tru-Sharp™ surgical steel, the company’s equivalent of 420HC stainless.

Paring Knife Maintenance Tips

After use, a few moments of care can extend the life of a paring knife. While convenient for pots and pans, etc., the dishwasher is notorious for destroying knives.

“Dishwashers are never kind to household knives,” Feightner said, “because the blade edges can be dulled by the movement of the knives during cleaning, and the detergents made for automatic dishwashers will tend to stain and pit the blades. Our wooden-handled knives have natural oils and pigments within them that can be compromised by the high temperatures employed by the dishwasher. As a result, fading and splitting of the wooden handles can occur.

“We recommend hand washing, using a mild-strength detergent, followed by a prompt water rinsing and hand drying with a clean towel. Cleaning products that include chlorine and/or bleach in them can cause the stainless-steel blades to discolor and pit.”

Knives stored loosely in a drawer can rattle against each other, chipping edges and posing cutting hazards to anyone rummaging for a blade. Once their knives are clean, professional chefs store them in a knife bag, roll or case. At home, a knife block, a magnetic strip or in a drawer as long as they are in sheaths, work equally as well to preserve the life of kitchen knives. After all, from feats of culinary artistry to cutting string, the paring knife will rest in kitchens for decades to come.

Mom, or Anyone, Will Like This, too

The official knife of BLADE Show 2018 is this special edition CRKT Caligo.

  • Only 150 made
  • Serialized number
  • BLADE Show logo on blade
  • Designer TJ Schwarz’s signature on the blade

Get this instant collectible now for only $49.99 at ShopBlade.com.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement