Judge Throws Out Motions in NYC Lawsuit

 

In a serious blow to the attempts by New York City and NYC District Attorney Cyrus Vance, Jr. to derail Knife Rights’ federal civil rights lawsuit against them, U.S. District Judge Barbara S. Jones on September 10 denied their motions for judgment on the pleadings and to dismiss the case.

    The ruling comes on the heels of a decision by Federal Magistrate Judge Ronald Ellis on September 7 allowing victimized NYC retailer Native Leather to join the case as a plaintiff.
 
     Download Judge Jones’ opinion and order here: http://bit.ly/ODNGi4   
 
     Together, Knife Rights said these rulings affirm that its lawsuit is valid on its face and will proceed to trial.
 
     “Despite their attempts to make this case go away, NYC and DA Vance will now be held fully accountable in federal court by Knife Rights for their disgraceful attempts to demonize the most widely-owned pocketknives in America as contraband, and to intimidate honest knife retailers into making six-figure forced ‘contributions’ to the City, under threat of criminal penalty, in order to avoid prosecution,” said Knife Rights Chairman Doug Ritter.
 
     The case seeks a judicial determination that the New York state laws regarding “switchblades” and “gravity knives” are unconstitutionally vague as applied to common pocketknives with a bias towards closure, including one-hand opening and assisted-opening folding knives. An example of a one-hand opener is Sal Manaro’s custom folder pictured above.
 
     “The dismissal of these motions vindicates our position that there are real constitutional issues involved,” Ritter noted. “The City cannot simply expand the state law to persecute knife owners and retailers to suit their own ends.
 
     “Suing the largest city in the U.S. is not something to be done lightly, but it is essential to our freedoms that New York not be allowed to trample on our rights, and Knife Rights has stepped up to the plate to defend freedom. Perhaps now DA Vance will recognize that this lawsuit is not going away and come to his senses instead of continuing to waste taxpayer resources victimizing law-abiding citizens who simply possess a practical tool (a common pocketknife), and the honest retailers who sell these tools.”
 

 

For the latest knives, knife trends, knifemakers, what knives to buy and where, knife legislation, knifemaking instruction, and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. Click on http://www.shopblade.com/blade-magazine-one-year-subscription-us/?lid=blss091112

Jensen Knives To Be In S.F. Art Exhibit

Award-winning knifemaker John Lewis Jensen will have two knives on display at 724 Studios in San Francisco Nov. 4 through Nov. 19, according to Jensen’s e-mail newsletter.

The knives will be exhibited in a show entitled “MOveMENT” sponsored by the Metal Arts Guild of San Francisco in celebration of the guild’s 60th anniversary, and will coincide with the one-day symposium, “Forging Communities.”

A story on how Jensen makes his “Desk Daggers” will appear in the upcoming book, “BLADE’s Guide To Making Knives, Vol. 2.” The book has a tentative release date of late April 2012.

For more information visit Jensen’s Website at www.jensenknives.com or e-mail him at [email protected]. Or, call him on his cell at 323-559-7454 or his alternate cell at 401-829-9959.

Sniper Bladeworks And Mossy Oak Team Up

Sniper Bladeworks announces a new collaboration, a collection featuring Mossy Oak camouflage patterns on its hard-use knives.

A new partnership between Mossy Oak and Sniper Bladeworks is set to bring a classic camouflage aesthetic to a line of purpose-built cutlery. The collaboration will see select Sniper Bladeworks models finished in Mossy Oak patterns, merging the well-known camouflage brand with Lance Abernathy’s reputation for hard-use knife design.

Based in West Point, Mississippi, Mossy Oak has long been a staple in the hunting and outdoor world. Its original Bottomlands camouflage pattern is ubiquitous and, to many, is synonymous with hunting season. This move represents a continued effort to integrate the company’s patterns into the EDC and custom knife markets. Sniper Bladeworks, founded by Abernathy in 2009, is recognized for its focus on ergonomics and field performance—traits often attributed to Abernathy’s background in law enforcement and security. Aside from their rugged engineering, the company’s knives are perhaps best known for their pistol-grip style handles, a signature design feature.

Full suite of Sniper Bladeworks knives dressed in Mossy Oak.

Abernathy, who remains the chief designer of Sniper Bladeworks’ knives, noted that incorporating Mossy Oak patterns into his designs has been a long-term goal. He views the collaboration as a way to bring a sense of outdoor heritage to his functional, often overbuilt tools. Adam Pener, CEO of Sniper Bladeworks, echoed this sentiment, suggesting the partnership is a natural fit given both companies’ focus on the hunting and outdoor communities.

While specific model names and exact release dates have yet to be finalized, the collection is expected to cater to hunters, outdoorsmen, and those who prefer a more tactical, camouflaged look for their daily carry. The upcoming releases will likely feature the signature pistol-grip ergonomics that helped establish Sniper Bladeworks in the custom market, now adapted for a wider audience through this brand alignment.

See More Knife News:

Two Knife Shows On Deck This Weekend

Check out the latest in custom, factory, antique and other knives at the SHARP Show and Ohio Classic Knife Show this weekend.

Held at the Fern Valley Inn in Louisville, Kentucky, the SHARP Show will be Oct. 20-22. It is sanctioned by the National Knife Collectors Association. For more information call 423-238-6753, e-mail [email protected] or visit www.spiritofsteel.com.

The Ohio Classic will be conducted Oct. 21-22 in the Pritchard-Laughlin Civic Center in Cambridge, Ohio. Call L.T. Wright at 740-219-1141, e-mail [email protected] or [email protected], or visit www.ohioknifeshow.com or www.bhkoutdoors.com.

AKTI Member Edward Weeren Wins Ontario Marine Bayonet

As reported Jan. 24, a member of the American Knife & Tool Institute won a USMC Marine bayonet by Ontario in a special AKTI drawing at the Ontario booth during the 2012 SHOT Show. AKTI member Ed Weeren wasn’t in attendance at the show, but was recently notified of his big win.

     Ed is the proud new owner of one of the first 200 OKC3s Marine Corps Bayonets, which is specially displayed and engraved with the AKTI logo and a quote from President Ronald Reagan  Ed also wins a stay in Western New York and private tour of the Ontario Cutlery facility.

     When responding to news of his win, Ed explained what being an AKTI member meant to him:

     “ I joined AKTI because of the respect I have for those who set it up and for the work AKTI is doing to allow citizens like me to continue to enjoy knives and to carry my pocketknives without fear of being arrested. I am an NRA Life Member and understand that each of us has to accept some responsibility and do what we can to help all of us continue the freedoms given to citizens when this country was founded. While I was not a Marine, I hold Marines in the greatest respect. I attended Texas A&M and received a commission in the U.S. Army in 1958. Keep up the good work you and your group are doing.”

    As a nonprofit association, AKTI’s role is to be the reasonable and responsible advocate for the knife-making and knife-using community, providing the focal point for sensible evolution, development, and the consistent enforcement of knife legislation.

For more information about the American Knife & Tool Institute, visit www.akti.org.

For more on the latest knives, knife legislation, knifemaking instruction, knife trends, knifemakers, what knives to buy and where and much more, subscribe to BLADE® Magazine, the World’s No. 1 Knife Publication. For subscription information click on http://www.shopblade.com/product/blade-magazine-one-year-subscripti…?r+ssfb020912#BL1SU

 

Ron Popeil, TV Knife Pitchman, Passes Away

Ron Popeil, best known as a TV infomercial pitchman, passed away on July 28, 2021, at the age of 86, according to multiple news media outlets.

The company Popeil founded, Ronco, is synonymous with as-seen-on-TV products, and the “set it and forget it” and “but wait, there’s more” catchphrases. While he wasn’t the first to apply salesmanship to the screen, Popeil did popularize the personality behind the product.

Popeil’s Showtime knife set is a perfect example. Well into his career as a “name” on TV, Popeil brought on his family to pitch his blades:

While Popeil’s contributions to all things sharp didn’t bring him to BLADE Show, there’s no doubt that his ubiquitous media presence influenced the consumer knife market and countless imitators.

BLADE Picks Hottest Custom Knives

New BLADE rocks!
BLADE picks the hottest custom makers’ hottest knives and features a bunch more sharp stuff in the latest issue. The cover knife is the Vanquish Pocket Deploy from Browning.

The hottest custom knifemakers’ hottest knives, a field test of four of the latest factory fixed blades sold for under $50 each, and how factory knife companies and custom makers arrive at collaboration knives are but a sample of the stories in the new BLADE®, on newsstands now!

Factory/custom collaboration knives go back at least as far as BLADE Magazine Cutlery Hall-Of-Fame© member Blackie Collins’s collaborations with Smith & Wesson’s knife line in the late 1960s. However, the explosion in such knives occurred circa 1990 with the C15 collaboration between Cutlery Hall-Of-Famer Bob Terzuola and Spyderco. Since then, collaborations have come by the train load. How has the process evolved and how have collaborations changed in terms of how they are viewed by both sides in the collaboration equation? Find out in “Deal Makers & Heartbreakers” by BLADE field editor Mike Haskew.

To fulfill reader requests for the best in economy knife buys, the new BLADE introduces “Budget Knife Buyer,” the first in a regular series of stories on quality knives obtainable from one or more retailers for $50 or less. First up are utility fixed blades. Join Abe Elias as he puts the CRKT Sting 3B, Condor Tool & Knife Tarpon, Gerber Ghostrike and Puma USA Badlands through the paces.

Twice each year, BLADE canvasses leading custom knife purveyors for the hottest custom makers’ hottest knives. The latest rendition of “What’s Hottest” features some of the world’s leading makers’ best recent efforts. Many of the makers’ names remain the same but the knives are hotter than ever. Check out which ones are sizzlin’ in “Sharp Studies in Standout Steel” by BLADE editor Steve Shackleford.

Also this issue: Join Michael Janich as he visits his friend, Fred Perrin, perhaps the most revered maker of tactical knives in France, in “Blademaker of Burgundy”; ABS master smith Larry Fuegen details his one-of-a-kind forged scroll folder in “Mad About Max”; the latest in straight razors and the secrets to keeping them sharp in Pat Covert’s “Razor Blades by a Whisker”; Zoe Crist’s hot stainless san mai steel and the knives that have it; James Morgan Ayres’s field test of four of the latest tactical folders, including this issue’s cover knife, the Browning Vanquish Pocket Deploy, in “Tactical Folder Field-Test Fest”;  and much more, all in the latest issue of the World’s No. 1 Knife Publication, BLADE.

Advertisement

Must Read Articles

Read this before you make a knife

Knifemaking 101 – Read This Before You Make a Knife

  by Wayne Goddard My experience has taught me that there's nothing like digging in and getting started. I've often said the hardest part of the...
how to forge damascus steel

How to Forge Damascus

Advertisement
Advertisement