Buyer's Guides Archives

Replaceable Blade Knives: Options To Always Keep You Sharp

Buyer's Guides

-

December 27, 2023

Replaceable Blade Knives: Options To Always Keep You Sharp

In the field, these knives always help you keep your edge.

And now for a style of edged tool that brings its own brand of controversy most wherever it goes—the replaceable-blade knife. No, not the utility knives you see in a ton of kitchen junk drawers, tradesman’s tool bags and on garage workbenches, but the models made for hunting and possible EDC use.

The controversy tends to surface between the traditional knife-carrying crowd and those who appreciate convenience. As one who loves and teaches sharpening, I tend to leave the replacement blades for my utility knives. These days, however, they have made their way into many different knife styles.

I’m going to gauge how four of the latest replacement models cut and handle, and, most importantly in my mind, how easy it is to change a blade on each one.

Hogue Expel Scalpel 2.5

You get a sturdy full-tang design with Hogue’s Expel Scalpel. A tight-fitting cover with a split ring carries the blade. Country of origin: USA.

Right off the bat, you will notice the Hogue Expel Scalpel 2.5 is some serious gear. The handle is a steel tang construction with textured G-10 scales in a blaze orange. The front bolster area is gimped, complete with a thumb ramp. Though the bolsters are screwed on the thumb ramp is not reversible, so sorry to all you southpaws out there. The handle is American made but the blade is marked England and #60. A #60 scalpel is used in dental surgery and postmortem work (it’s nice to know medical examiners wait for the person to expire before they start hacking into them with such a scalpel). Instead of stainless the blade is a high carbon steel. If you want to prolong the life of the Expel’s replacement blade, you can easily strop it.

Since it is an actual scalpel blade, that means you should be able to source multiples of them easy enough. I would go online and order. Since the pattern is used for postmortem work, that would raise fewer eyebrows. I did a quick check and was able to find a pack of 20 of the blades for around $10.

Hogue’s design for its replaceable blade knife uses the traditional blade mounting system. The best way to change the blade is with a pair of pliers. Doctors usually use a set of forceps. Handling wise the knife is quick and nimble. You hold it like a regular scalpel, with your index finger along the blade spine, and guide the edge. It comes with a zipped pouch and a plastic sleeve that fits over the blade. Having the textured G-10 scales and beefier handle contour enhances purchase. I like the design. It fits my hand well. I had perfect control over the edge. I wouldn’t hesitate to take this with me hunting and use it as a caping knife. I certainly will be packing it for pheasant hunting this fall to process the birds and clean up the gizzards.

Hogue Expel Scalpel 2.5 Specs
Overall Length: 7″
Closed Length: Not applicable
Blade Length: 2.5″
Handle material: Orange G-10
MSRP: $114.95

Coast 1919 Reserve Shift

Selection of blades for Coast 1919 — The selection of blades Coast supplies with the 1919 is compatible with regular utility blades. From top: an attached regular utility blade, drop point and gut hook. Country of origin: China.

With the 1919 Reserve Shift, Coast has gone with more of a traditional utility folder design. Don’t let that fool you, though, because the knife does offer some innovations. Coast has patented both the blade changing arrangement—called the swap out system—as well as the blade storage system. Two of the three blade styles that come with the knife are customized: the spear tip and gut hook. The third is a regular utility pattern. The system is compatible with standard utility blades, which means you can buy other patterns such as serrated and a roofer’s hooked blades. I don’t know why the company bothered designing a gut hook, as a hooked utility blade would work just as well. The handle is a glass reinforced nylon with a textured rubber insert. The 1919 carries in a pouch sheath.

There are two locking systems. The primary is a linerlock and a double lock prevents the liner from moving to the side. A thumb stud provides ambidextrous one-hand opening. The stud is also part of the opening system. Depress the button on the stud, slide the stud down and the blade comes out.

The blade release system works well but, as far as innovation goes, it doesn’t draw a “wow” from me. Conversely, that Coast bothered to care about how easy it is for you to access the extra blade storage is impressive. It is a straightforward arrangement but, after all, what good is a replaceable-blade system if you can’t get at the extra blades?

Overall, the knife handles like any other utility folder, but the devil is in the details. All the little extras help it edge out the other similar designs. Best of all, except for the proprietary blades, you can pretty much walk into a Walmart and get a blade for the 1919.

Coast 1919 Reserve Shift Specs
Overall Length: 6.875″
Closed Length: 4.375″
Blade Length: 2.5″
Handle material: Glass reinforced nylon w/textured rubber inlay
MSRP: $39.99

Havalon Piranta Bolt

Note the thumb disc on the Havalon Bolt’s blade holder, which makes ambidextrous opening possible. Also, the bright orange ABS handle on this replaceable blade knife makes it more likely you will find the knife if you ever set it down. Country of origin: handle made in Taiwan and the blades are made in India.

The Havalon Piranta Bolt is a blend between the Coast 1919 and the Hogue Expel Scalpel. The Bolt uses a #60 surgical blade like the Expel Scalpel, though Havalon’s is marked 60A and listed as stainless steel. The blade opens via an ambidextrous thumb disc and locks via a linerlock like the 1919.

A belt carry case houses 12 extra blades. If you only occasionally stropped your blades instead of changing them out, you would have a ton of cutting time. The handle is a bright orange ABS plastic with a textured rubber insert. It feels blocky in the hand. Using ABS plastic keeps the knife lightweight. Between the lightweight feel of the plastic and the lack of contouring, it is not a comfortable grip. The small, trim-profile pocket clip is stronger than it looks.

Havalon gets innovative as far as providing a blade-replacing tool. When changing a scalpel blade, normally you take a set of forceps or a pliers and lift up the back end and push the blade forward. Havalon’s little clamshell-style tool closes around the blade so the edge is not exposed. Snap the tool closed and the rear of the blade bends upward, enabling you to pull the blade off the holder. It worked every time I tried it and it didn’t damage the blade. I was even able to reinstall the same blade. An issue is that there is no place to store the tool in the pouch and, due to its size, would be easy to misplace/lose.

Havalon Piranta Bolt Specs
Overall Length: 7.375″
Closed Length: 4.5″
Blade Length: 2.75″
Handle material: ABS plastic w/rubber inlay
MSRP: $54.99

Kershaw LoneRock RBK 2

Kershaw fixed-blade handle — Kershaw also includes a fixed-blade handle with its replaceable blade knife’s kit. It’s lightweight and the texture and profile offer plenty of purchase power.

The Kershaw LoneRock RBK 2 is another replaceable model that uses a #60 scalpel blade. (I’m starting to feel like a few of these companies had a meeting and I wasn’t invited.) The RBK 2 comes with 14 extra blades in a carry case and one on the knife. A pocket in the belt pouch holds the carry case. A cool feature of the case is a slash pocket for the knife, making it easier to get a purchase on the handle for deployment.

Speaking of the handle, it’s glass filled nylon with rubber overlay. It’s listed as black and tan but looks more like black and green. If I had to pick something Kershaw should have had more foresight about, it’s the color. Green and black pretty much screams “lose me” for a hunting knife. On the other hand, for caping the #60 scalpel blades should do the trick. Also, Kershaw did a great job contouring the handle so it’s easy and comfortable to hold. The blade opens ambidextrously via the double thumb stud and secures via a linerlock. There is no pocket clip, though there is a hole for a lanyard.

Kershaw really put its thinking cap on when it comes to tool-less blade removal. A liner lifts the rear of the scalpel blade, enabling you to slide the blade off. However, I would still play it safe and grab the blade with, say, a pair of pliers. During use I never had an issue with the removal liner being bumped, but I will wait and see. I must say, Kershaw impressed me with this one.

Kershaw LoneRock RBK 2 Specs
Overall Length: 7.2″
Closed Length: 4.4″
Blade Length: 2.8″
Handle material: Glass filled nylon w/rubber overlay
MSRP: $47.99

Points To Ponder

Replaceable-blade knives add to the depth of edged tools available in the cutlery world. As with all knives, they have their place. They have already experienced some popularity among certain trades and professions. If you like to sharpen, remember that even a replaceable blade can be touched up at times.

Check Out More Outdoor Knives And Tools:

Best Bushcraft Knife: When Steel Meets Woods
Best Camp Knives: Outdoor Do-Alls
Best Hatchets And Axes For Survival And Camping
Best Gut Hook Hunting Knives

Benchmade Infidel Review: Breaking The Mold For OTF Autos

Dexter Ewing

-

December 20, 2023

0

Benchmade Infidel Review: Breaking The Mold For OTF Autos

Breaking from the boxy OTF autos, the Benchmade Infidel cuts a unique profile that’s made it a hit among high-end knife lovers.

Out-the-front (OTF) automatic knives have long been popular with knife enthusiasts because they are different enough to be unique but not so odd as to be useable. OTF’s main mechanism of action is propelling the blade fore and aft in relation to the handle, as opposed to out the side in a radial fashion as most known automatic folding knives operate. Presently a few knife companies offer OTF automatics but there is one drawback to most designs (if you see it as such)—most have boxy handles.

This is primarily out of necessity. The handle shape in generally needs parallel sides to facilitate the fore and aft motion of the blade as it extends and retracts into the handle. And with the sliding switch actuation located on the spine, there isn’t much that companies can do with handle shape changes.

Enter the Benchmade Infidel, a high-end USA-made OTF with a curvy handle.

Benchmade Infidel Handle — Photo: Marty Stanfield – Marty Stanfield Photography

How did the company accomplish this? By relocating the actuation slide switch from the handle spine to the handle scale. Moving the switch opened up possibilities of experimenting with different handle shapes, even ones that enhance user grip and safety as well. The Infidel’s handle is curvy, yet symmetrical and sports a three-dimensional texturing pattern to boost hand traction.

Infidel Blade

The Infidel’s dagger-shaped blade measures 3.9 inches in length and sports a traditional grind for this style of knife and a symmetrical appearance. This truly is a dagger blade with edges sharpened fully on both sides. Benchmade opted for D2 steel for the blade, selected for its known edge retention and toughness.

A fuller is machined down the centerline of the blade, enhancing the appearance and giving it a bit of an edgy attitude. The blade is finished with a black coating, serving as an additional layer of corrosion resistance, as well as a low profile, non-glare finish. For those who might not be aware, D2 is not stainless steel and requires a little extra care. This coating accomplishes this job.

Infidel Handle

The handle measures 4.8-inches long and it is machined from aircraft-grade aluminum for both strength and weight reduction. The overall handle shape is inviting with its multiple curves that define a forward guard of sorts to park your hand in place. Moving towards the middle, there is a slight contour that helps to fill your grip more, and the expanded section at the rear of the handle aids in preventing rearward sliding.

Like the blade, the handle shape is symmetrical and very pleasing in appearance when you factor the blade’s uniformity. The handle sports bi-directional machining patterns helping to hold your hand in place. If the machining pattern look familiar, it should. It is the same style used on Benchmade’s Presidio automatic folder.

Benchmade Infidel Clip — Photo: Marty Stanfield – Marty Stanfield Photography

To fire the blade, there is a stepped slide switch on the presentation side of the handle. The machining pattern on the switch allows for positive thumb engagement to deploy and retract the blade. The reverse side of the handle is smooth and you find a deep carry, fold-over style pocket clip affixed to the handle to carry the Infidel tip down in the pocket. The clip easily attaches to your pants pocket and holds the knife securely.

Using The Infidel

While it is possible to EDC a dagger blade OTF (though, be sure to check your local laws first on knife carry), I will have to caution against the fact that its use as a working knife is rather limited given the blade design. The dagger grind makes the tip devastatingly sharp and pointy (a good thing), it also leaves the tip more susceptible to damage or even breakage if the knife is used heavily. This is especially true when prying or twisting while cutting actions may be involved.

With certain tasks where puncturing and cutting—such as opening bags of mulch or topsoil—the Infidel definitely excels. Push the blade through the bag and pull it to the side to slice the top open. It all happens effortlessly. Opening mail, opening packages, cutting cardboard, breaking down cardboard boxes, and cutting shrink wrap are some tasks that the Infidel can also handle with aplomb.

Benchmade Infidel In Use — Photo: Marty Stanfield – Marty Stanfield Photography

The ease of extending and retracting the blade simply by moving the slide switch forward or backward makes using the knife easy. One thing to note regarding the handle ergonomics in general, the Infidel is glove-friendly. With some knife handles, the handle feels lost in your gloved hand. You cannot manipulate it easily, it feels too thin. With the Infidel, the handle design translates well to gloves.

The D2 steel is respectable in performance, offering enhanced edge retention and toughness against wear and impact. It’s a well-known steel, especially in the outdoor knife market, where large camp knives and choppers may be made from D2 for these very reasons. While you are certainly not going to do any chopping or batoning with an OTF, it’s nice to know the blade is that tough and can take a fair amount of abuse before it needs to be sharpened.

I have always had good luck with D2 and found it to be a very good-performing steel for its price. Since you’re not going to be engaged in heavy work with the Infidel, D2 is perfect and when it does come time for a resharpening, D2 sharpens up quicker than all your high-performance steels. Another plus!

Infidel Variations

For those of you who wish for a smaller Infidel, there is the Mini Infidel which has a 3.1-inch long dagger blade. All the material specs are the same as the full-size Infidel. The overall length is 7.1 inches, and the Mini Infidel is a very pocket-friendly design. It’s sized right for daily carry and for those with smaller hands. Size wise it’s not as imposing as the full-size Infidel but its smaller size allows it to get in and out of more daily carry tasks like opening packages, mail, and some general cutting tasks as you work around the home, yard, and garage.

Infidel Mini — Photo: Marty Stanfield – Marty Stanfield Photography

Additionally, there is an upgraded model with a few bells and whistles. Benchmade dressed up the Infidel by offering three shades of nature-inspired colors: Crater Blue, Woodland Green, and Flat Dark Earth. These limited edition knives come out in 1,000 batches, and are also equipped with upgraded blade steel to satin-finished, premium CPM S30V. This is a long-time standard steel in the knife industry, known for its toughness and extreme wear resistance.

Final Cut

The Infidel is one of the more interesting OTF automatic knives on the market. It combines style, function and quality materials to equate to a long-lasting tool that will stand the test of time.

The Benchmade 3300BK Infidel has an MSRP of $550.00. The 3350BK Mini Infidel has an MSRP of $500. The Flat Dark Earth, Woodland Green, and Crater Blue full-size Infidel have an MSRP of $650.00 each. The same colors for the Mini Infidel are $600.00 each.

Check Out More On Benchmade:

Benchmade Bugout Review: Getting A Handle On The EDC Icon
Benchmade 940 Review: EDC Knife By The Numbers
Best Benchmade Knife: What Are The Company’s Classics

Spartan-Nemec Folder: Czech Design Delivers Tactical Sophistication

Elwood Shelton

-

December 13, 2023

0

Spartan-Nemec Folder: Czech Design Delivers Tactical Sophistication

Collaboration between Spartan Blades and Ondřej Němec is sleek, slender and ready to serve.

Hard-use, tactical tools—Spartan Blades‘ designs are generally as conspicuous as a hand grenade in a sewing circle. That happens when the mucky muck has a Special Operations background.

But simply because the North Carolina concern favors brute superiority over frivolous aesthetics doesn’t mean it’s devoid of a sense of style. The freshly minted Spartan-Nemec Folder is more than proof.

Release in early December, the straight-back folder is a dashing addition to the Spartan Blade’s catalog. And while it appears more James Bond than Rambo, the knife offers up the same exceptional tactical performance for which Spartan is renowned.

Spartan-Nemec Design Background

For those who follow European knifemaking, the moniker of the new blade is a tip-off of its origins. Boasting a slightly Americanized play on Ondřej Němec’s surname, the knife is a collaboration with one of the Czech Republic’s premier designers. His company—Acta Non Verba Knives (ANV)—has become known for knives that have a desirable balance between modern lines and tactical practicality. Overall, his portfolio teams with clean design, with just enough swagger to catch the eye, without crossing over too gaudy. Which, in so many words, sums up the Nemec Folder.

Spartan-Nemec Folder Design Points

spartan-nemec-carbon-fiber — Spartan-Nemec with carbon-fiber handle.

Right off the tick, the Spartan-Nemec Folder grabs attention with its overall svelte design. Intentional, the 3.5-inch blade knife is meant to nearly disappear on the person and prove as unobtrusive as possible in carry. Along with its thin lines, Spartan and Němec have opted for lightweight scale materials, with the choice of titanium and carbon fiber. The scale is enhanced with attractive diagonal millwork—certain to improve the purchase of the knife.

The blade is S35VN, a well-rounded top-end stainless-steel, with a long drop-point profile and sporting the choice of finishes. Well, at least for the carbon-fiber model, which is offered with a tumbled or Black PVD blade. The titanium iteration is only available with a stone-washed blade.

The Nemec’s blade is deployed via an understated kicker, which blends in well with the rest of the design. Getting it into action is quick and smooth, thanks to a caged-bearing pivot system. Finishing off the package, a deep-carry wire clip (tip up), which makes the knife nearly disappear on person.

As for cost, the Spartan-Nemec folder falls in the toner end of production knives, with the carbon-fiber model boasting a $275 MSPR and the titanium a $295 MSRP.

Spartan-Nemec Folder Specs:
Designers: Ondřej Němec
Blade Length: 3.5”
Blade Thickness: 0.125”
Overall Length: 8”
Blade Steel: Premium CPM S35VN
Blade Hardness: 58-60 HRC
Blade Style: Folding-Straight Back-Flat ground
Blade Finish: Stone Washed (titanium); Tumbled or Black PVD (carbon fiber)
Frame: Liner Lock, Satin Titanium Finish with Black Hardware or Sculpted Carbon Fiber
Weight: 2.624 ounces (titanium); 1.984 ounces (carbon fiber)
MSRP: Titanium $295; Carbon Fiber $275

Check Out Our Knife Reviews:

Oknife Beagle Review
Versa Rescue Knife Review
Knife Review: CRKT Bamboozled
M-1 Folder Review: How Good Is This Folder?

Spyderco Paramilitary 2 Review: Still A Cut Above The Rest

Dexter Ewing

-

December 11, 2023

0

Spyderco Paramilitary 2 Review: Still A Cut Above The Rest

The Spyderco Paramilitary 2, simply known as the Para 2, is a part of the Military family of popular tactical folders in the Spyderco lineup. The Para 2 came about as a downsized version of the full-size Military model, answering the call from customers for a practical EDC option.

Smaller it might be, but the Para 2 retains the essence of what makes the Military a popular working folder. And because of this, the knife has developed a cult following. However, it’s not simply a shrunken-down facsimile of its larger predecessor, having gone through several design improvements that have dialed in the knife to users’ needs.

In this article, we’ll examine exactly what has made the Spyderco Para 2 such a winner in the company’s lineup. And why, if you need a truly rugged everyday option—or just want a classic in your collection—the legendary knife more than fits the bill.

Para 2 Blade

To start things off, the blade of the Para 2 sports a useful clip point shape, enhanced with a full flat grind. Furthermore, the knife has a gradual distal taper from the tang to the tip, evident when viewed from the top. The length of the blade measures 3.4 inches long, enough length to take care of heavy work but short enough for comfortable carry in a pocket.

Constructed of CPM S45VN high-performance stainless steel, Spyderco picked the perfect material for a high-end knife. Compared to the gold standard of this class—S30V—S45VN proves a bit tougher, yet is remains easy to resharpen. That is if you have to. The blade’s toughness means it holds an edge extremely well, suiting it for long-haul work without interruption. A final point, S45VN is fairly renowned for its corrosion resistance, making the Para 2 excel in nearly any environment.

As those familiar with Spyderco can guess, the blade boasts the company’s trademark hole near the spine, at the rear. This has been the go-to deployment method for time immemorial on the firm’s knives. Rounding things out on the blade, there’s integrated chill formed by part of the blade and handle when the blade is opened. A choil permits the user to further choke up on the blade for extra control when needed.

Para 2 Handle

Spyderco opts for a black textured G-10 for the handle, which endows it with a few assets. First, it keeps the knife nimble, cutting down on the Para 2 overall weight. But this isn’t at the expense of strength—G10 is tough as cut nails—and a solid purchase on the knife.

Paramilitary 2 handle — Dark, dashing and useful, the Para 2’s G-10 handled gives users a firm grip on the knife.

The handles are milled out, allowing the slightly undersized stainless steel liners to sit flush with the G-10. Nicely, this reduces the overall width of the handle but doesn’t sacrifice the lateral strength of the liners. Spyderco also turns its eye to weight reduction with the liners, porting them to further lighten the load—while not compromising strength.

The handle shape itself is very ergonomic, like the full-size Military. There is an expanded, curved section that forms an integral finger guard to prevent your hand from sliding forward. The handle feels very secure in hand, and this inspires user confidence.

Compression Lock

The Para 2 utilizes Syperco’s Compression Lock to secure the blade, a solid system that has several benefits. For those unfamiliar with the mechanism, it’s an in-house design that provides an extremely strong lockup. It operates by the lock bar wedging itself onto a ramp on the blade’s tang and a hardened steel stop pin. As an added benefit, the release is situated on the handle spine, just behind the blade within reach of the thumb and forefinger. Not only is the design ambidextrous, but it also facilitates fast and intuitive one-hand opening (with a bit of practice) and closing.

Pocket Clip

A steel pocket clip is attached to the handle in the right-hand, tip-down configuration. However, Spyderco has what they call 4-way clip mounting with the Para 2. This means the handle is drilled and tapped to modify the clip’s position, thus the carry style. Again, this makes the knife lefty- and righty-friendly, as well as allowing for tip-up or tip-down carry. Understandably, this is another facet of the Para 2 has that a lot of fans.

Para 2 clip — No matter how you carry or hand you use, you can move the clip to suit your needs.

The handle also has an open build, allowing you to effectively clean lint and other debris out of the inside of the handle by using either compressed air or tap water. The handle length is 4.8 inches, making the overall length of the Para 2 around 8.2 inches. I would consider any folder with an overall length of 9 inches to be large, so to say the Para 2 is a midsize folder is a stretch. It’s safer to say it’s on the upper end of being midsize. Still kind of compact, but large enough to handle some man-sized cutting jobs.

Para 2 In Action

The flat ground blade with distal taper helps the blade sail through anything with ease. This is exactly the reason why the full-size Military is a favorite among knife users the world over. You’ll notice the blade bites in and does so aggressively and it just takes off. Shoot, I have even used my Para 2 and Military in the kitchen to aid in food prep at times. The Para 2 makes for an effective paring knife.

Paramilitary 2 open — An all-time classic, the Para 2 offers users an option fit to tackle most jobs.

Outside of the kitchen, the Para 2 slices through cardboard, plastic edging, styrofoam blocks, and even strips wire with ease. Spyderco’s cutting edges out of the box are nothing short of perfect. The Para 2 can be put to work immediately without modifications to the edge. S45VN’s durability is out of this world. You’ll benefit from the enhanced edge-holding capability of this steel by not having to sharpen as often. However, all this depends on your frequency of use and that can vary from person to person.

The handle ergonomics are very comfortable. The Para 2 didn’t leave any hot spots of any kind and is pleasurable to wield during extended periods of use.

Final Cut

I think you will find the Para 2 to be an excellent daily carry choice for you, if you are looking for a working folder that is also a super comfortable EDC knife. As for how much the Spyderco Paramilitary 2 will set you back, the MSRP starts at $265.00 for the black G-10 handle/satin-finished blade as tested here. There’s also a camo handle for the same price, and black DLC coated versions for a bit more at $285.

More Spyderco Knives:

Cutting Critique: Spyderco Presistence
Spyderco Yojimbo 2: Fantastic Straightedge Folder
Spyderco Tenacious Review: The Relentless Workingman’s Knife
A Look At The Spyderco Webfoot Sharpener

Kershaw Blur Review: Focusing On The EDC Classic

Dexter Ewing

-

December 4, 2023

3

Kershaw Blur Review: Focusing On The EDC Classic

A mainstay in the company’s catalog, the Ken Onion-designed, USA-Made Kershaw Blur remains a clear EDC choice.

Kershaw’s Blur has been in the company’s line for several years and it continues to be a good seller for the company. You get it all with the Blur—a handsome look, useful blade shape, and made-in-the-USA toughness.

Devised by custom knifemaker Ken Onion, the Blur exhibits the hallmarks of Onion’s design with its recurve drop point blade and optimized handle shape promoting user comfort, as well as safety. Plus, you get a choice of several variations with the Blur. Each differs by blade steel and handle color, adding some style and flair to your daily carry arsenal.

Kershaw Blur Blade

The Blur’s blade measures 3.4-inches long and is made of Sandvik 14C28N stainless steel. For those seeking a higher-performance steel, Kershaw offers an upgraded S30V version. Though the base-model steel is no slouch, as 14C28N holds an edge well, yet resharpens fairly easily. The Blur’s blade has plenty of bite right out of the box, thanks to its hollow grind.

For deployment, the Blur uses ambidextrous thumb studs. These are custom-designed studs, with a unique slanted portion. This rake allows you to bump with your thumb and then back off immediately, so they won’t be in the way of opening.

Speed Safe System

Deployment speed doesn’t disappoint, thanks to Kershaw’s Speed Safe assisted opening technology. The Speed Safe system was developed by Ken Onion and serves as a way to quickly and effectively open a folding knife blade quickly with minimal user effort. Essentially, a torsion bar propels the blade open after the user initiates blade movement by pushing out on the thumb stud.

Kershaw Blur Handle

For those who appreciate a solid and comfortable grip (who doesn’t?) the Blur incorporates some interesting design elements.

Starting with the construction, Kershaw has opted for aluminum alloy, making the handle both lightweight and strong. The shape is also well thought out, offering an intriguing and aesthetically pleasing shape, that doesn’t compromise on comfort. It’s a good example of Onion’s profound understanding of knife ergonomics.

Blur Handle — A fluid shape, the Blur looks nice and fits the palm well. Photos Marty Stanfield

Furthering the usability, the Kershaw chamfers all the edges, ensuring there are no hotspots on the knife and textured rubber inlay inserts are a practical bonus, increasing grip traction tenfold with either wet or dry hands. Kershaw calls this material Trac Tech and it’s very similar to the self-adhesive grip tape you might find indoors in wet locations such as a swimming pool deck.

Interestingly, Trac Tech also helps with holding the knife to the pocket, making it a bit difficult to slide in and out. Depending on who you are and your particular activities, this can be a good thing or an annoyance. It is insurance from the knife falling out of your pocket, but it does slow retrieval time.

I like the use of Trac Tech on the blur simply because it gives the handle a more tactile feel to it.

Trac Tech in a Blur — Looking for more grip, Trac Tech inserts gives the Blur more bite. Photos Marty Stanfield

The general open build of the handle makes cleaning easy, especially when using compressed air or rinsing out under tap water. There is a pocket clip that helps to carry the Blur in the pocket and Kershaw gives you the option of either tip-up or tip-down carry but for right-hand carry only. Sorry lefties!

Final Cut

The Blur is a stylish EDC folding knife that doesn’t back down when there is tough work ahead. The recurve blade cuts very well, and its ample belly makes it an efficient slicer.

The hollow grind really thins the blade out nicely without making it too slender, and therefore it will cut through tougher materials with greater ease. It really excels at cardboard. I like this material for testing as it is a good standard because of its thickness and slight abrasiveness. Both aspects test the edge’s geometry.

Several Kershaw Blurs — Kershaw offers several colors and blade options, helping the Blur fit most folks style. Photos Marty Stanfield

The liner lock of the Blur is dialed in nicely, it hits the tang on the lower third of the width of the blade and allows for some wear as the lock breaks in. Yet, the lockup is very secure. The exposed portion of the lock bar that you contact to release the lock has traction notches on it so you can get a good grip on it. I thought was a nice extra touch on Kershaw’s part.

Overall, the only nit to pick is I wish the clip was designed to carry the Blur deeper in the pocket. Other than this, no real issues to speak of with the knife

When it comes time to purchase a Blue, this might be the hardest decision because of the variety of models. There are a ton of colorways for the handle—black, navy blue, and olive green. Additionally, Kershaw offers several blade options, including plain edge and partly serrated as well as stonewashed, blackwash and Cerakote black finishes. If that weren’t enough, you also have a choice of a tanto blade as well, if that’s more your speed. Heck, there’s even an option with a carbide glass breaker at the end of the handle.

Blur and cardboard — Still a classic after all these years, the Kershaw remains a solid EDC option. Photos Marty Stanfield

The Blur’s MSRP starts at $135 and goes up from there to as much as $185 depending on blade finishes. Overall, the knife presents an overall package—Onion design, high function, nice styling and plenty of options choices. What this adds up to, is an EDC option that should be welcome in anyone’s collection.

Delight Valley Veggie Slicer Review: Roughing Up Roughage

Msg Kim Breed (ret.)

-

December 1, 2023

0

Delight Valley Veggie Slicer Review: Roughing Up Roughage

Specially formulated to knock vegetables down to size, the Veggie Slicer has an edge in the kitchen.

Never judge a book by its cover. That holds true for knives, too.

When I opened the box containing the Veggie Slicer from Delight Valley Blades, I noticed it did not have a tip like most knives. Well, at least I wouldn’t stab myself. The knife has a full flat grind to sharp, with a very fine edge. It’s made for slicing and dicing, though you know I will do more with it than that.

Veggie Slicer In The Kitchen

Since hunting season was starting, I made a big pot of vegetable beef soup before heading to the woods. I used the Veggie Slicer to slice and dice the veggies. It powered through the carrots very quickly and diced up the celery cleanly. I did my thinnest slice of onion ever. I could easily see the layers of the san-mai through the wafer-thin onion. I chopped the rest of the onion in a flash. On to the potatoes!

Veggie Slicer through a potato — The author sliced the potato so thin with the Veggie Slicer you can see the layers of san-mai through it.

I was expecting more resistance from the spuds. Light pressure was all it took. The knife being so sharp, I had to take care to keep all finger parts away from the edge. The Veggie Slicer will peel the skin from your finger before you can say Veg-O-Matic—and I had a few close calls.

Veggie Slicer Light Cutting Duty

With everything in the pot cooking, I headed out to the garage to slice up the non-edibles. I grabbed a sheet of 20-pound bond copy paper for slicing. I managed to suffer only one nail nick in making the paper fall apart. The knife is nasty sharp for sure. The slices were smooth and I used only the weight of the blade on the pull cuts.

I jumped up to double-walled cardboard to try and slow the edge down. That didn’t work, either. The Veggie Slicer ate through the cardboard as fast as I could get my fingers out of the way. I used both push and pull cuts to see if there was a difference. There was none.

Delight Valley Veggie Slicer vs pine — Thin pine curlicues were the order of the day for the Veggie Slicer.

Heavy-Duty Cutting

It was on to whittling pine. The Veggie Slicer made very thin curlicues. I couldn’t choke up on the blade as the spine was cut at a 90-degree angle—too sharp for the insides of my fingers. As a result, control was a tad more difficult. The blade still cut deep and shallow without a challenge. It zipped into the pine quickly, still scary sharp.

It was time for some half-inch sisal rope. After the first 100 crunching cuts I let my guard down enough to take a nick out of my rope-holding finger. Thanks to all my callouses no blood was shed, but it was close. The second 100 went off without any dulling of the edge (or my finger).

I had to go one step further to see if the fine edge would hold up. I grabbed a whitetail deer antler and gave it 30 chops. The result: no edge damage whatsoever, a sign of perfect heat treatment.

Final Cut

The Veggie Slicer can slice, dice and a lot more if needed. It has one long-lasting edge.

Soup prep with Veggie Slicer by Delight Valley Blades. — The kitchen knife sliced and diced the veggies, powered through the carrots very quickly and diced up the celery cleanly. It’s soup!

I would soften the blade spine and choil and ricasso area so a wider selection of hand grips can be used.

Delight Valley Blades Veggie Slicer Specs
Blade length: 7.5”
Blade steels: 26C3 carbon core and 416 stainless cladding in a san-mai construction
Blade grind: Full flat
Blade width: 1.78”
Handle: Masur birch and carbon fiber
Pins and liners: G-10
Weight: 10.5 ozs.
Overall length: 12.25”
Maker’s price: $600

Spyderco Tenacious Review: The Relentless Workingman’s Knife

Dexter Ewing

-

November 28, 2023

0

Spyderco Tenacious Review: The Relentless Workingman’s Knife

Built like a top-shelf Spyderco, but at a fraction of the price the Tenacious more than lives up to its name.

Spyderco’s knives are about as high-performance as you can get in a production knife. They look at things from all angles, from blade grinds to handle ergonomics and how each plays an important role in the other. It’s a symbiosis of sorts. Therefore, most of their knives are on the pricey side but very well worth it.

The use of high-end materials with superior ergonomics and cutting-edge blade steels get everyone drooling, but there is one factor that spoils it for some. The high price.

“No thank you”, some might retort. Then resort to looking at other brands, whose offerings might be a bit cheaper and more within their budget range. Still, they crave Spyderco.

Fear not my penny-pinching friends.

Spyderco Tenacious neutral open copy — Affordable and capable, the Tenacious proves a capable workingman’s knife. Photo: Marty Stanfield

Spyderco had exactly you in mind when it unleashed the C122GP Tenacious. An excellent value folder from incorporating all the hallmarks of a Spyderco design and execution but without the scary high price tag. Essentially, it’s an everyman’s knife, with the elite performance the company has built its name on.

How’s that for value?

Spyderco Tenacious Blade

Starting with the modified clip point blade of the Tenacious, 8Cr13MoV stainless steel was chosen because of its great balance between edge retention, ease of sharpening and low cost. For those not familiar, 8Cr13MoV is the Chinese equivalent of the Japanese-made AUS-8. A lot of entry-level to mid-range knives have this steel. It makes a great choice for a working folder as 8Cr13MoV is relatively easy to resharpen and takes a good edge in minimal time.

The blade length is 3 ⅜ inches, long enough to for serious work but short enough to carry easily in the pocket. Jimping on the thumb rest allows you to place your thumb there to apply downward pressure on the blade. The rest sample we were sent has a satin-finished blade, though, Spyderco offer the Tenacious with a black coated blade for low visibility, as well.

Spyderco Tenacious Blade — A 8Cr13MoV drop-point blade offers respectable steel in a useful profile.Photo: Marty Stanfield

Additionally, partially serrated edge formats are available for enhanced cutting power. This blade design is a workhorse, with its flat grind and distal taper, which allows the blade to become a voraciously efficient slicing tool. Honestly, Tenacious in hand, you’ll be able to slice through your biggest and toughest cutting tasks with ease.

Spyderco Tenacious Handle

Look at some other budget folding knives on the market and you can tell where corners were cut. One evident area is handle design. No so with the Tenacious.

Spyderco has some of the best handle designs on the market, the company has an intimate understanding of how to design a comfortable interface comfortable for extended hard usage. In this case, the knife uses a black textured G-10 phenolic resin handle for both reduced weight and an excellent grip. As a side note, the handle length is 4 7/16-inces long and overall, well thought out. In the hand, it proves comfortable, important with any knife. There are no hot spots to speak of and it seem designed for long periods of use without fatigue.

Spyderco Tenacious lock vertical copy — In addition to G10 scale, the Tenacious has a study double stainless-steel liner to provide the handle plenty of backbone. Photo: Marty Stanfield

Double stainless-steel liners provide a solid backbone for the handle, and a sturdy liner lock secures the blade in the open position for ultimate user safety. A radiused gripping area accommodates the fingers well and the perimeter of the G-10 is chamfered to reduce sharp corners for a comfortable grip.

Four sets of clip screw holes are drilled into the handle, offering a have-it-your-way approach to pocket clip mounting. You can mount the clip for left-hand use or right-hand use and within these two, you can have either a tip-up or a tip-down configuration. The clip comes from the factory set up for right-handed, tip-down configuration.

Practicality Of The Spyderco Tenacious

If you are in any of the trades and use tools in your job—a knife being one of them—it’s very important to select your work knife carefully not just from a budget/financial standpoint but feature-wise as well. Just because it is a budget knife doesn’t mean it’s stripped down and basic.

Budget knives can include some creature comforts that make work easier. The Tenacious packs in one hand ambidextrous opening, a secure blade lock, open handle construction with dual steel liners and textured G-10 handles. Furthermore it boasts a pocket clip with user-selectable modes of carry, and a properly designed blade that will cut efficiently. All this, in one knife.

Spyderco Tenacious clip_ copy — Righty, lefty, doesn’t matter. Spyderco enginereed a clip that caters to either hand and nearly any style of carry. Photo: Marty Stanfield

With this being said, the Tenacious lives up to its name as it is eager to tackle any cutting task that awaits. The MSRP for the Chinese made Tenacious is $86, which means it probably can be purchased online for around $60. This makes it a great bargain for a sturdy, well-designed work knife. And if you lose it, you are not out a lot of money.

If you have more expensive knives in your collection and are hesitant to beat on as a work knife, then the Tenacious fills that role well. What you have here is a midsize folding knife that feels good in the hand and cuts exceptionally well.

Final Cut

As an owner of quite a few high-end Spyderco models such as the Military, Paramilitary 2, Manix 2, Shaman, and a few others, I can honestly say the Tenacious performance-wise is almost identical. Bold statement, I know. But all Spyderco knives just have that feel to them—no matter the price. If you are a fellow Spyderco owner, you know exactly what I am talking about.

Spyderco Tenacious action 2 copy — Spyderco created an affordable gem in the Tenacious. Photo: Marty Stanfield

The 8Cr13MoV steel holds an edge well but don’t expect it to be like S30V and hold an edge for a long time. Maintenance in the field is possible with the right sharpener and the steel responds well to routine touch-ups.

Just do yourself a favor and purchase a Tenacious and put it to work. You won’t be disappointed. Spyderco did their homework with this budget-conscious folder that’s packed with features that also are found on their more expensive knives.

More Spyderco Knives:

Cutting Critique: Spyderco Presistence
Spyderco Yojimbo 2: Fantastic Straightedge Folder
Spyderco Tenacious Review: The Relentless Workingman’s Knife
Spyderco Paramiliary 2 Review: Still A Cut Above The Rest

Buyer's Guides

In the field, these knives always help you keep your edge.

Hogue Expel Scalpel 2.5

Coast 1919 Reserve Shift

Havalon Piranta Bolt

Kershaw LoneRock RBK 2

Points To Ponder

Check Out More Outdoor Knives And Tools:

Breaking from the boxy OTF autos, the Benchmade Infidel cuts a unique profile that’s made it a hit among high-end knife lovers.

Infidel Blade

Infidel Handle

Using The Infidel

Infidel Variations

Final Cut

Check Out More On Benchmade:

Collaboration between Spartan Blades and Ondřej Němec is sleek, slender and ready to serve.

Check Out Our Knife Reviews:

Para 2 Blade

Para 2 Handle

Compression Lock

Pocket Clip

Para 2 In Action

Final Cut

More Spyderco Knives:

A mainstay in the company’s catalog, the Ken Onion-designed, USA-Made Kershaw Blur remains a clear EDC choice.

Kershaw Blur Blade

Speed Safe System

Kershaw Blur Handle

Final Cut

Read More About Kershaw:

Specially formulated to knock vegetables down to size, the Veggie Slicer has an edge in the kitchen.

Veggie Slicer In The Kitchen

Veggie Slicer Light Cutting Duty

Heavy-Duty Cutting

Final Cut

Read More Knife Reviews:

Built like a top-shelf Spyderco, but at a fraction of the price the Tenacious more than lives up to its name.

Spyderco Tenacious Handle

More Spyderco Knives:

Must Read Articles