Here are BLADE Magazine’s Featured Knives of the Week. Browse through these articles to find the best knives available from both custom knifemakers and factory knives.
GiantMouse Releases New Set Of Sleek, Robust Folding Knives–the ACE Corta line–Made From Austrian Steel.
Stylish. Tough. Strong.
Those are just a few words to describe the newest folding knives released by GiantMouse. The ACE Corta Knife comes in three different styles and is as good as it gets when it comes to an EDC folder.
The showpiece is the blade, made of Böhler M390 stainless steel from Austria. Known as one of the ultra-premium stainless steel, martensitic steel is renowned for its and ease of sharpening. Essentially, it’ll take and keep an edge.
At 3.1 inches in length with a flat saber grind, the ACE Corta is a flipper inspired by GiantMouse’s limited-run GM6 knife.
The Natural Canvas version of the ACE Corta
The ACE Corta comes in three styles: a green-canvas-colored Micarta handle and a stonewashed finish on the blade, a natural-canvas-color Micarta handle with a satin finished blade and a black PVD finish blade itself with a black G10 laminate handle.
All three knives have an overall length of 7.3 inches, a handle length of 4.18 inches, and come in between 3.8-4 ounces in weight.
The knives open quickly and smoothly thanks to the ball-bearing pivot. They all have a wire clip so it can slide easily onto a belt, purse, or pocket. And each version of the knife has an MSRP of $195.
Given the engineering that has gone into the ACE Contra, the price should prove a value to most.
Editor’s Note: This article was written by Mike Ableson.
D2 Delivers In Edge Holding, Overall Performance, And Affordability. These Four D2 Knives Are Emblematic Of The Toughness Of The Material
Even if you haven’t used a knife of D2 tool steel, you’re no stranger to it if you have been into knives for any length of time. Many knife manufacturers use D2, as have numerous custom knifemakers.
Why is D2 so popular? Two reasons are it offers the best bang for the buck in terms of edge holding and overall performance. D2 is regarded as a step up from basic, low-grade stainless steel and is often found in entry-level to mid-grade production knives. One drawback: D2 is not a stainless steel so it will require a bit more care. Still, the performance advantages outweigh that drawback and you get a knife with enhanced edge-holding power that handles tough cutting chores.
D2 comes from the metalworking industry. There it is primarily used to make steel cutting dies, so that tells you all you need to know: It basically is a steel used to cut steel. Think about that for a minute. D2’s chemistry in percentages is 1.4 to 1.6 carbon, .7 to 1.2 molybdenum, 11 to 13 chromium, and 1.1 vanadium. It can be hardened past 60-61 HRC on the Rockwell scale without being brittle. BLADE Magazine Cutlery Hall-Of-Fame® members Jimmy Lile and Wayne Goddard used D2 a lot in their knives, as does Bob “Dr. D2” Dozier extensively in his outdoor models. Top production knife companies such as CRKT, Kershaw, SOG, A.G. Russell Knives, Ontario and KA-BAR are but a few that have multiple offerings using D2.
CRKT Fawkes
The CRKT Fawkes is an excellent choice for a stylish EDC folder, featuring flipper operation and IKBS pivot bearings for smooth opening and closing.
Maker Alan Folts designed the CRKT Fawkes to be a stylish, colorful EDC linerlock folder. The knife’s name is derived from the Harry Potter movie franchise, specifically the phoenix that appears in the series.
With a closed length of just 3.76 inches the Fawkes carries comfortably, and the blade deploys fast and easy thanks to the IKBS-ball-bearing pivot and assisted-opening spring. The two work in conjunction to provide swift, smooth deployment, and the assist helps detent the blade in the closed position.
The multi-layer orange G-10 handle generates visual excitement and a splash of color. The ergonomic design provides a comfy grip for cutting tasks. The 2.74-inch, clip-point blade is flat ground and sports a swedge as well as a milled-in fuller, which creates a bit of attitude. A flipper tab helps initiate blade deployment. The knife carries securely thanks to a deep carry, fold-over-style clip that holds the closed Fawkes blade tip up and as low as possible in a pocket.
The handle shape is striking. A pronounced finger groove near the pivot helps index your grip, while chamfering eliminates harsh edges and hot spots. The matching orange G-10 handle spacer sports a series of large notches that help seat the knife in your grip. Blade action is quick and authoritative. The linerlock engages the tang with zero movement. CRKT will make the Fawkes a regular production knife model this year, with the only change being a switch to 1.4116 stainless for blade steel.
Made in Taiwan, the MSRP for the Fawkes is $89.99.
Kershaw Endgame
The high flat grind of the Kershaw Endgame makes it a great choice for a working utility knife.
Kershaw‘s Endgame flipper folder features a highly usable modified drop-point blade, along with an ergonomic handle featuring modern design elements, all translating into a classy EDC that opens easily via the flipper tab.
The 3.25-inch flat-ground blade incorporates a distinctive humpbacked swedge for an aggressive look. A notched rest on the spine allows comfortable thumb placement for greater blade control. A stonewashed finish seals the tiny pores of the steel’s surface to fight corrosion as well as give the blade an industrial look. It also hides scratches from use pretty well and reduces glare.
A stainless steel framelock ensures solid lockup. The large finger recess at the pivot end helps index your grip. The handle curves aid in secure purchase every time.
The handle’s aesthetics are interesting. There’s bronze PVD (physical-vapor-deposition)-coated steel accents, textured FRN (fiberglass-reinforced-nylon) scales and a window cutout. The multi-layered visual adds more subtle color to the otherwise gray blade and handle. I do not care for it—it seems too busy. I don’t mind one type of overlay or even some machined-in grooves on the handle surface—both achieve function along with a sensible appearance. A deep carry pocket clip positions the closed Endgame nice and low in the pocket away from probing eyes.
While ergonomic and comfortable, the handle is a bit lacking in the midsection. For extended use, I would not recommend this knife. My hand grips the handle tighter to make up for the lack of bulk in the midsection. The answer is to redesign the handle and give it more mass. However, for tasks requiring choking up on the blade and handle for extra control, such as wire stripping, the Endgame is ideal. I felt in full control of the blade and was able to make precise cuts easily. If you do a lot of detail cutting, this might be the knife for you, or even if you need a folder for mundane slicing tasks. It’s got a great blade shape that is stylish.
Made in China, the Endgame has an MSRP of $107.99.
Medford Knife & Tool 187DP
At 5 5/8 inches closed, the biggest knife of the test bunch is the Medford Knife & Tool 187DP. Its hollow-ground drop-point blade makes short work of most any cutting task. The half-titanium/half-G-10 handle is equipped with a framelock.
Medford Knife & Tool specializes in manufacturing hard-use knives in the USA. These are not safe queens—they are engineered to hold up in real-world survival situations. The 187DP heavy-duty framelock folder is a representative example. The hollow-ground blade is 3.75 inches and comes in a utilitarian drop-point pattern. Closed length: 55/8 inches. An oblong hole facilitates easy one-hand opening. Dual thumb studs function as the blade stop in the fully open and closed positions.
The blade is 3/16-inch thick. Make no mistake, the 187DP is quite a chunk! The grip is ⅝-inch thick, and you will know when it’s in your pocket. A milled titanium clip carries the closed knife blade tip up but is not reversible. Any company using milled clips gets bonus points in my book. Regular stamped steel clips do a very good job at holding your knife at the top of the pocket for easy access, but, in my opinion, are not much on style points. Milled clips look more stylish and also hold the knife securely to the pocket lip.
If you are a rough user and use your knives outdoors or just plain beat them up, the 187DP is for you. Its rock solid build and bulk stand up to the heaviest use. I like the way the handle tapers toward the butt end, enabling you to get a secure hold. A series of traction notches machined close to the butt further assist in obtaining a solid no-slip handhold. It feels fixed in your hand and instills confidence in controlling the large blade. The steady grip allows you to bear down on the blade to power it through cuts.
Many who favor tactical folders will tell you a framelock is best for hard use. The 187DP’s framelock engages quite securely and disengages with a firm push. A milled-out section on the lockbar accommodates a thumb to disengage the lock—nice touch by the Medford crew. The blade cuts aggressively and dispatches most any material and food with aplomb.
Out of the box I really liked the factory edge. The ultra-strong lockup makes the knife feel like a fixed blade. Consequently, user confidence is high and you don’t have any reservations about putting it through the toughest jobs. While a large tactical folder, it can easily be tamed for precise cutting by making use of the choil to choke up on the blade and handle.
There’s also about an inch-and-a-half-long run of traction notches on the spine just above the blade hole. Your thumb rests comfortably there and you can execute controlled cuts easily—a very nice touch and positive attribute.
The only complaint I have about the 187DP is the size and, therefore, the weight, both of which exceed the limit for what I consider an EDC folder. You can feel its bulk and presence in the pocket, especially when you bend over.
MSRP: $475.
SOG Stout FLK
The SOG Stout FLK is definitely stout! Don’t let this compact folder fool you—it’s built for heavy work. It can get down to precise work as well, such as stripping wire.
The SOG Stout FLK is configured in collaboration with Danish maker Mikkel Willumsen. In appearance, the framelock folder lives up to its name and has a 2.62-inch drop-point blade. Closed length: 3.38 inches.
If you’re looking for an inexpensive work knife, the Stout FLK is it. It’s big enough to handle most cutting chores but not too big to be in the way or too cumbersome to carry. With its flat grind and short swedge, the blade shape is utility friendly. An oblong hole permits you to thumb the blade open as you would any one-hand folder, or you can use the flipper tab instead.
A pronounced choil enables choking up on the blade for more exact control and works with the large finger recess in the handle as well. Spyderco does this sort of thing, too. It’s a way to make smaller knives feel large in the hand and provide more blade control.
The handle is in the familiar half-and-half framelock construction, using textured G-10 on the presentation side. This saves weight as opposed to having an all-metal handle and also adds traction for sure handling. A matching steel spacer provides balance as well as structural rigidity.
The deep-carry pocket clip is ambidextrous and holds the Stout FLK low in the pocket while keeping it easily accessible. The clip is attached to the butt end and comes over the side. SOG calls it a bayonet-style clip, a style used quite a bit in the company’s line.
Made in China, the MSRP for the Stout FLK is $54.95. Finally, SOG will release the knife as a slip joint this year.
The New Endela Wharncliffe K390 From Spyderco Is The Newest In The Endela Line And Uses A Distinctive Blade Design And State-Of-The-Art Tool Steel To Stand Out.
When Spyderco releases new knives they’re always fun and push the boundaries of what an EDC can be. In the case of the new Endela Wharncliffe K390, there’s so much new about it that it stands out even in comparison to other knives from the company.
It all starts with the K390 MICROCLEAN blade steel. This all-new particle metallurgy tool steel was designed with wear resistance and compressive strength in mind. The straight-edged blade takes the steel and turns it into an exceptional folder that’s tough enough to handle all sorts of intense industrial applications. At 3.42 inches long, the blade is beefy enough to attack big tasks while compact enough for more intricate work.
The blade is married to an FRN handle, and the back lock keeps the whole thing solid and firm in your hand when deployed. The ambidextrous pocket clip allows for easy carry on either side of your body, in your purse, or in a travel pack.
Once again, Spyderco has knocked it out of the park with their newest addition to the Endela line.
The Best Pocketknives For Women Are Knives That Are Easy To Maintain And Can Be Deployed In A Flash. These Pieces Stand Out From The Pack.
A pocketknife in and of itself isn’t gendered. It’s a piece of steel and aluminum, maybe Micarta®, that’s shaped to be a cutting tool.
However, certain knives are better for women due to the convenience, the fact that they are a bit smaller, or that they are excellent knives that are great at protection as well as standard EDC tasks. Below are a quartet that stand out from a crowded field of knives, any of which would be a great gift for your wife, sister, or yourself.
Kershaw Leek
Kershaw makes excellent knives at excellent prices, and the Leek is no exception. With a 3-inch blade and coming in at just three ounces, the Leek would be a perfect carry in a bag or a clutch as it doesn’t take up too much space.
The drop-point blade of 14C28N stainless steel is shaped to be a great EDC cutting tool as well as a puncturing implement if called upon. The bead-blasted blade and steel handle give the knife a clean, monochrome look. Made in the USA, the Leek opens easily with a flipper, and will serve you well for a very long time.
MSRP: $79.99
Benchmade Mini Griptilian
Benchmade makes high-quality knives with exceptional craftsmanship. The Mini Griptilian is small, nimble, and rugged knife that will be your loyal sidekick. It starts with the glass-filled nylon handle that provides a great grip and can take a beating.
The 2.91-inch plain-edge drop-point blade is CPM S30V stainless steel, opens with a thumb stud, and has a flat grind designed for slicing through pretty much anything within reason. The AXIS lock is fun to use and secures the blade safely and solidly in the open position. At just 2.81 ounces it’s incredibly light and perfect for life on the go.
MSRP: $150
Brighten Blades Green Day
Brighten Blades is a small, women-run factory knife outfit based in Utah. The Green Day knife is part of the company’s “Not So Heavy Metal Series.”
The knife is a small, minimalist blade with a 2.5-inch 8Cr13MoV stainless steel blade and an aluminum handle in a rich green. The blade also comes with a suede carrying case to store in a purse or pocket. This also keeps the knife in one secure place and doesn’t allow for accidental deployment.
The knives are fun to use and come in many different colors and designs.
MSRP: $29.99
Victorinox Swiss Army Knife
The unstoppable Alpine Swiss Army knife (SAK) from Victorinox is a great pocketknife for women. Even this small version features numerous tools that will help every day, from a spear-point blade to tweezers, scissors, nail file, and screwdriver.
All of the tools are made from stainless steel and are designed to last for life. The Swiss Army knife isn’t just for the intense outdoor enthusiast or craftsperson; the tool is excellent for busy parents looking to have a small toolbox at hand for whatever the kids can throw at them. The SAK is utilitarian and has endured for a reason.
You can also customize this version in 10 different colors, ranging from teal and pink to black and lime green.
The CJRB Crag Is A Fairly-Priced Knife That Looks Great, Cuts Greats, And Is Absolutely Worth The Investment.
Lighter isn’t always better. As many makers produce more and more knives that are at or below two ounces in weight, a bigger, beefier folder can stand out and appeal to a different type of consumer. Enter the CJRB Crag.
This tactical folder looks cool and feels hefty in all the right ways at 6 ounces in weight. The 3.43-inch blade is flat ground and has a black PVD coating to help with corrosion resistance. It’s ready to rock and roll out of the box thanks to being treated to a 59-61 HRC. The cleaver-style blade is an excellent chopping tool. This knife was built to confidently chop and slice.
What makes it feel even more rugged than it is is the handle. The carbon fiber handle is incredibly light and allows for the weight to be allocated elsewhere in the construction.
What CJRB has done is create a knife that will stand up to intense use and done it to keep things affordable for the consumer. It’s a win/win all the way.
Is the assortment of knives in your house as appropriate as it should be?
At one time I thought I wasn’t a knife collector. I am a knife enthusiast, knife user, knifemaker, knife writer, maybe even a reluctant knife expert, but not a knife collector.
Back when I thought that way, I looked around and noticed I had a dozen knives within arm’s reach, plus the tools in the kitchen, plus the customs of my own and a few from others, plus all the factory knives. Turns out I had nearly 100 knives, which means I’m definitely a knife collector, or at least an accumulator.
In my usual ADHD stream-of-consciousness fashion, my next thought was, “I wonder if I have a knife in every room of the house?” followed immediately by thoughts of which kind of knife would go in each room. Come along on my imaginative journey as we explore the idea of a knife for every room.
Kitchen
Knives in the kitchen are a given but including one by bladesmith Salem Straub is not. In the author’s perfect household cutlery world, one would be. An example: Salem’s Guimard chef’s knife in mosaic damascus. (EatingTools.com image)
The kitchen is intuitive. Most people have knives there, whether the knives are economy store cheapies, a mishmash random drawerful accumulated over years, a matching production set, or even dedicated custom household cutlery. On my imaginary journey, I can afford the good stuff, like a damascus chef’s knife from bladesmith Salem Straub. But that’s too easy. Why not a whole knife-fork-and-spoon-damascus set, like one from Nate “Tuna” Grant?
Garage
For the garage, the author suggests a factory utility knife of the replaceable-blade variety such as the Civivi Elementum.
The garage isn’t too tough either. My first thought was a utility knife of the replaceable-blade variety. In the past few years there’s been innovation in the custom knife world when it comes to replaceable blade knives, but for utilitarian and “I can use this and not be sad if I scratch it,” I think I’ll go with the Civivi Elementum that uses standard box cutter blades.
Living Room
If the living room has a fireplace mantle, it’s a great place to display a custom sword. If you’re feeling medieval, the author recommends something like a hand-and-a-half piece by Ryan Breuer. (Ryan Breuer image)
The living room has the fireplace mantle, which is a great place to display a custom sword. If I were feeling medieval, I’d choose something like a hand-and-a-half piece from Ryan Breuer. Conversely, if I were feeling loud and Japanese, I might choose a fine bright katana like one from David Goldberg with an epic hamon.
Study
Along with studies, game rooms are also great for storing knife collections. Avid bowie collector Chris Nolen keeps his collectibles in a game room display designed by his son-in-law, replete with a statue of Jim Bowie and slide-out drawers that hold around 10 bowies each. (Chris Nolen image)
The gentleman’s study is dark, filled with books and memorabilia—the perfect place to store and display the “real” knife collection. Personally, I’d like a collection of custom bowies. I’d include pieces like a fully forged integral mosaic model from ABS master smith Mike Quesenberry, or an exquisite collaboration like The Knifemakers’ Guild award-winning piece by Nick Orr and Bailey Bradshaw. Or maybe I’d go rustic like ABS master smith Lin Rhea’s Preacher Bowie named after a mountain man. I’d round out the room with an engraved silver cigar-cutter-and-match-box set by Travis Payne engraved by Matt Litz for when the guys and I want to relax with a puff.
An engraved silver cigar-cutter-and-match-box set by Travis Payne engraved by Matt Litz for relaxing with a puff among friends would round out the author’s dream study. (Matt Litz image)
These days most tend not to receive letters, only junk mail and bills, and most of the junk mail goes straight to the trash unopened. But if I had a home office and I received good mail, I’d have to open it with a custom letter opener like one in a set from Deon Nel. He made a matching set of 16, so I bet he could spare one.
Outdoors
The backyard isn’t exactly part of the house, but that doesn’t exempt it from being a part of the author’s imaginary knife journey. If you have a standard grill, consider something like a san-mai brisket slicer from Dan Tompkins. (SharpByCoop image)
The backyard isn’t exactly part of the house, but that doesn’t exempt it from being a part of my imaginary knife journey. For those with a standard grill, you might consider something like a san-mai brisket slicer from Dan Tompkins. Or if you’ve got a fire pit, don’t forget Will Stelter’s damascus and mammoth ivory marshmallow fork. Or if you live in the woods, you might want a forged axe like a laminated wrought iron one from Nick Bachtel.
Bedroom
The author’s dream bedroom pillow dagger would be like Buttercup’s in The Princess Bride. If he were Buttercup’s beau, Dread Pirate Roberts, the author stated he might give his lady something like a poignard by Jamie Bishop. (SharpByCoop image)
Bedroom knives are a bit of a stretch. Personally, I have my hunting knives in my bedroom closet. If I were rich and fancy, though, I’d have to have a pillow dagger—you know, the dagger you keep under your pillow just in case. I’m reminded of the scene in The Princess Bride when Buttercup pulls out a fine stiletto in the bedroom, and the great Dread Pirate Roberts line that goes with it: “There is a shortage of perfect breasts in this world. It would be a pity to damage yours.” If I were Dread Pirate Roberts, I might give my lady friend something like a poignard by Jamie Bishop, or even something dainty and feminine like a fine small piece from ABS master smith Veronique Laurent. For under my personal pillow, I’d go with something extravagant like an art dagger from the Sobral Brothers.
Bathroom
Bathrooms are for hygiene and sometimes that takes a knife. To clean your fingernails or pull a splinter in style, the author recommends something like the fine Dourado collaboration between ABS master smith Dionatam Franco and Evan Nicolaides. (Mitchel Cohen image)
Bathrooms are for hygiene and sometimes that takes a knife. If you want to clean your fingernails or pull a splinter in style, I recommend something like a fine collaboration between ABS master smith Dionatam Franco and Evan Nicolaides. The pearl scales will shimmer in the vanity lights, and there are enough tools included to take care of many different tasks. Or if you want to play “Mack the Knife” in a dark alley then come home and comb your hair, Rick Lala can hook you up with his two-tool blade/comb folder.
How Close Are You?
You may not have a knife for every room, but I suspect that many BLADE® readers come very close. Here’s to improving the quality of your knife collection—even the bedroom knives!
On This Independence Day We Here At Blade Want To Celebrate All-American Knives
America is celebrating its 246th birthday today. In all those years the knife has been an integral tool to the growth of the United States, and, as such, we here at Blade want to celebrate it on this beautiful Independence Day.
These are 10 beautiful All-American knives to get you in the holiday spirit.
MTech USA 440 Steel USA Design Pocket Knife
MTech USA 440 Steel USA Design Pocket Knife
The name may be a mouthful, but the knife is a beaut. MTech has made a spring-assisted folder out of 440 stainless with an aluminum handle. The handle is decorated with an American flag design and the opening text of the Constitution. This drop point has an MSRP of $15.95.
Berg American Flag Themed Bowie Knife
Berg American Flag Themed Bowie Knife
Custom-made to order by knifemaker Dan Berg, this Bowie is 11 inches long and can be made out of 1095 carbon steel or AEBL stainless. The metal is etched with a patriotic star pattern and the handle has a flag pattern made out of Micarta or cast resin. This beautiful knife has an MSRP of $300.
Mega Knife American USA Flag Spring-Assisted Folding Open Pocket Knife
Mega Knife American USA Flag Spring-Assisted Folding Open Pocket Knife
A bright, bold American flag on the handle shines bright on this piece from Mega Knife. The stainless steel blade features a blackwash finish, and the pocket clip lets you bring this knife everywhere. This folder has an MSRP of $19.95
CobraTec Knives Small CTK-1 Cerakote American Flag
CobraTec Knives Small CTK-1 Cerakote American Flag
This CobraTec double-action OTF knife featured a striking American flag handle made of aluminum alloy married to a 2.75-inch D2 steel blade. You can pick between four different blade styles (drop point, tanto, dagger, Wharncliffe), and all but the Wharncliffe have serrated options as well. It features a nylon sheath, pocket clip, and a glass breaker at the end of the handle. This comes with an MSRP of $149.99.
Modern Artisans 3-Inch Pocket Knife With American Flag Stonework
Modern Artisans 3-Inch Pocket Knife With American Flag Stonework
This 3-inch folder from Modern Artisans has a stunning damascus blade made of a core of VG-10 wrapped in 32 layers of stainless. The brilliant American flag handle is made from lapis lazuli, red coral, and mother of pearl. This knife has an MSRP of $132.99.
Victorinox Super Tinker
Victorinox Super Tinker
From the makers of the famous Swiss Army Knife, Victorinox has made an All-American medium pocket knife that has the option of an American flag design and not just the classic red. It features 14 tools including two blades, three screwdrivers, and scissors. It has an MSRP of just $43.99.
The twist damascus pattern steals the show for this model from Orklo Knife. The three-inch, HRC 55-58 blade is connected to a four-inch red, white, and blue handle made of dollar sheet and inlaid with a star mosaic pin. This piece has an MSRP of $69.99
Cabela’s Flag Tanto Blade Folding Knife Two-Pack
Cabela’s Flag Tanto Blade Folding Knife Two-Pack
Two knives are always better than one, and Cabela’s has an affordable patriotic combo pack. Both knives have blades made of 8Cr13MoV steel. The larger blade is three inches long and partially serrated. The shorter of the two is 2.75-inches long and features a flat edge. The combo has an MSRP of $19.97.
KCCEdge 8-Inch Two-Piece Large American Flag Throwing Knife Set
KCCEdge 8-Inch Two-Piece Large American Flag Throwing Knife Set
For something fun, you can go wrong with these throwing knives. These KCCEdge knives feature a top-to-bottom flag design that was embossed printed on the blades. What could be more fun than watching Old Glory fly through the air? These could be yours for the MSRP of $14.
Red Dot Laser Engineering “The Patriot” Folding Knife
Red Dot Laser Engineering “The Patriot” Folding Knife
Red Dot Laser Engraving, a veteran-owned business, has made a stainless steel folding knife with an American flag engraved on both sides of the blade and an aluminum body. The design won’t wear off so you’ll be able to proudly show it off for decades. The MSRP is $17.76.
ASR Outdoor Patriotic Locking Pocket Knife
ASR Outdoor Patriotic Locking Pocket Knife
Adorned with the head of a bald eagle on the handle and atop the the American flag on the handle, this knife from ASR Outdoor screams American pride. The steel alloy clip point opens with a nail nick, and the whole piece is eight inches in length. It also comes with a collectible display box. The MSRP is $14.99
