Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.
The short answer: A handle design favored by custom knifemakers that resembles a bird’s head with a short beak at the butt of the handle.
Given the practicality and curves of the bird’s-beak handle, it is small wonder that it is quite the popular grip among today’s knifemakers. In fact, the design resembling a bird’s head with a short beak at the butt of the handle has appeared in many cultures over many centuries.
Tad Lynch indicated that crafting a good bird’s-beak design requires practice and the courage to push things. His Irish Traveler Fighter features a handle of koa, a 9-inch blade of W2 tool steel with hamon and is 14 inches overall. His list price for a similar knife starts at $1,100. (SharpByCoop knife image)
“You see it in different variations on Persian daggers and swords,” said North Carolina knifemaker Ken Hall. “Also, some kukris have the ‘hook’ in the handle. In American knives you see it in some of the Buck knife designs.”
When the ABS journeyman smith with 11 years of experience is not forging in the Smoky Mountains, he raises honeybees, hikes and teaches others the craft. He made a bowie in January in preparation for an ABS master smith test that had to be pushed back because of a bicycle accident.
While many makers make a bird’s-beak handle with a dense hardwood, Paul DiStefano took a risk on a material that has a reputation of being temperamental: ancient walrus ivory. Blade length and material: 12 inches and 500 layers of 1095 carbon and 15N20 nickel alloy steels. His list price for a similar knife: $1,800. (SharpByCoop knife image)
He picked the bird’s-beak handle design because it pairs well with large knives, especially those with recurve or clip-point blades. A big block of wood large enough to develop the butt’s shape is one of the best material sizes for the design, Hall explained.
“The bird’s beak provides a more controlled grip for the hand,” he noted. “The contour snugs around the little finger, keeping the knife from slipping forward while in use.”
The result, combined with a balanced knife, is a tool that feels like an extension of the hand.
There must be something in the Amazonian water. In the global phenomenon of custom knives, there are few geographic locales that sizzle hotter than Brazil. The country has sharp makers and attracts talent, creating some of the world’s most desirable knives. Here is a look at some of the steel expertise emanating from the equatorial nation and its cutlery shows.
Romário Ribeiro Fighter
Sleek and dark, Romário Ribeiro’s 12-inch fully integral fighter of 52100 carbon steel won the Best Handle Award at Salão Paulista de Cutelaria 2025. It’s no wonder, with a seamless and intricate keyhole-style construction, and jacaranda wood and 24k gold inlays creating a boundless night sky motif, complete with a rising crescent moon.
Gustavo Schuenck Fighter
Winner of the Best Fighter Knife Award at Salão Paulista de Cutelaria 2025, Gustavo Schuenck’s blade is aggressively beautiful. San mai steel of 9½ inches with a black phosphate finish ties together with the knife’s pitch-colored jacaranda handle. The nuanced recurve toward the heel offers flow in the build, paired with an understated yet sweeping guard.
Alexandre Biguna Bowie
Near-perfect symmetry of Alexandre Bigunas’ basketweave mosaic damascus bowie can’t help but fascinate. The meticulous work on the 10-inch blade is contrasted by the striking color of the sub-hilt’s mammoth-molar handle and pair of amethyst stones on either side of the guard. Topping off Bigunas’ work, 24k inlay, including his signature on the blade.
Júlio Cézar Ribeiro Gentleman’s Slip Joint
Simple, clean and classy are the driving ideas behind Júlio Cézar Ribeiro’s gentleman’s slip joint. The Brazilian’s spotless execution also caught the judges’ eyes at Salão Paulista de Cutelaria 2025, with the knife winning Best Traditional Folder. Notable aspects of the knife includes the swooping spine of the RWL 34 steel Wharncliff blade, maintaining the knife’s overall geometry with its teardrop mother-of-pearl handle.
Lizandro Bertoni Bowie
Lizandro Bertoni’s bowie is a study in contrasts. The flats of the 16-inch, 1085 and 15N20 damascus blade dominate with a starburst-like mosaic pattern, but give way to a cross pattern at the edge. Further, the busy ornamentation of the blade is contrasted with the calmer design of its walrus-ivory handle and the smooth lines of its texturing.
Vanuti Fiori Dagger
Dang sexy is all that can be said of “Lady of the Night,” a collaboration between knifemaker Vanuti Fiori and engraver Gabriel Krebs. It’s not only the lines of Fiori’s integral dagger that drip sex appeal, but also Krebs’ alluring feminine -form scrimshaw on its mother-of-pearl inserts.
Francisco Wlach Gaucho
Francisco Wlach takes the workingman’s gaucho knife to a different level with the execution of his knife’s 10-inch laced mosaic blade. Wlach creates movement on the blade with a very uniform pattern over the majority of the steel, contrasted by a more subtle pattern along the edge. Gold inlay, integral bolster and mammoth-tooth handle would make this blade any gaucho’s pride.
KA-BAR’s website says that the Single Mark KA-BAR is the knife for those who have “never been in the military.” That’s less of a dig at those who haven’t served than it is being true to the brand. Every KA-BAR knife traces its lineage back to the USMC Fighting/Utility Knife. As such, the Single Mark is made to the exact specifications of that legendary knife.
Unlike the military, however, you can personalize the Single Mark right out of the box. One side of the blade is stamped with, “KA-BAR, OLEAN NY,” while the other side is blank. That’s a perfect spot for an engraving.
Plus, this made-in-the-USA slice of history is built for the masses with an MSRP of $113.45.
As of this writing, the MSRP for the Single Mark is $113.45. (KA-BAR photo)
Manufactured: USA
Overall Length: 11.875”
Blade Length: 7”
Blade Width: 1.188”
Bulk Weight: 0.7 lb.
Handle: Leather
Blade Stamp: KA-BAR
Steel: 1095 Cro-Van
Thickness: 0.165”
Grind: Flat
Angle: 20°
HRC: 56-58
Sheath: 1217I – Leather
Spartan Harsey Difensa
The Spartan Harsey Difensa is named after a battle fought between the U.S./Canadian First Special Service Force and German troops in Italy. Known as the Battle for Monte la Difensa, the courageous performance of U.S. and Canadian forces there was essential to the eventual Allied victory in Italy. (Caption and photo via Spartan)
Named after the 1943 battle for Monte la Difensa in Italy during World War II, the Spartan Harsey Difensa is a prime example of military history meeting modern knifemaking.
The knife got its start when the Canadian special forces commissioned Spartan Blades and William Harsey to produce a blade for it. This U.S./Canada collaboration harkens back to the Allied heroism of that 1943 battle, so the result needed to be perfect.
From the looks of it, the spear-point Difensa hit its mark and then some. Its design wouldn’t be out of place in either country, or abroad for that matter.
The full tang and handle of the Spartan Harsey Difensa allow for a neutral balance in the user’s hand. Combined with the textured, ergonomic canvas Micarta handle (modified from Spartan’s Model II with no rear jimping) this custom combat knife offers the wielder a comfortable, confident grip whether wet or dry. (Caption and photo via Spartan)
Designer: William Harsey
Overall Length: 11 5/8″
Blade Length: 6 1/4″
Blade Thickness: 3/16″
Blade Steel: CPM S35VN
Blade Hardness: 59-60 HRC
Blade Style: Spear Point
Grind: Flat ground main bevel with tapered top edge.
Coating: SpartaCoat – PVD – Tungsten DLC (Black) or ZrN (Flat Dark Earth)
Handle Material: 3D Contoured CE Canvas Micarta® Black or Green
Weight: 0.710 LBS
Spyderco Native 5 Abel Reels Exclusive Signature Series
The brown trout pattern. (Spyderco photo)
The bonefish design. (Spyderco photo)
Spyderco’s collaboration with fine fishing tackle manufacturer Abel Reels has turned out a creel of keepers with the painstakingly detailed Native 5 Abel Reels Exclusive Signature Series.
One look will show you what makes this series of three knives stand out. The same proprietary process Abel Reels uses to make its tackle so realistic is also applied to the design of the knives. That’s not to say the knives can be used as fishing lures, but it’s pretty close.
Each work of art wraps itself around Spyderco’s popular Native 5 folding knife platform. These photorealistic knives might swim away if you don’t watch out.
QSP doubles down on the growing interest in urban EDCs with the Hawk QS131 line of four knives (A, B, C and D). The handle and blade material separate each of the four, but the rest of the specs are roughly the same.
The squared off handle design in each Hawk softens the overall design, staying true to urban EDC’s non-aggression ethic. The same could be said for the damascus on two of the Hawk knives; urban EDCs need to have something to talk about.
Ceramic ball bearings mean no matter which of the four Hawk knives finds its way into your pocket, it’s sure to pop open like a true flipper every time.
QS131-C-Hawk (QSP photo)
QS131-D HAWK (QSP photo)
Mechanism: Flipper (Ceramic Ball Bearing)
Blade: Chinese Damascus Steel or CPM35VN (Satin Finish)
Handle: Carbon Fiber (A), Verawood (B) or Carbon Fiber (C)
Lock: Locking liner
Overall: 7.35”
Closed: 4.125”
Cutting edge: 3.225”
Net weight: +/-3.6oz
SOG Trident AT
(SOG image)
With flippers all the rage, is there still room for an assisted opener? Absolutely.
SOG’s Trident AT is an overbuilt example of the enduring assisted opening category, marketed as being “designed for professional users.” Anyone can order up the AT, though, and why wouldn’t they? The assisted mechanism opens rapidly, and the blade stays securely in place with SOG’s renowned AT-XR locking system, including an ambidextrous safety in the handle.
Why so much security? SOG anticipates you’re going to beat the heck out this knife. SOG prides itself on taking its folders to the limits, and this is no different.
Plus, the line cutter and glass breaker mean that no matter what you encounter in the field, you’ll be ready.
Kissing Crane 2018 Valentine’s Day Toothpick Pocket Knife (image via BudK)
Help celebrate Valentine’s Day by telling BLADE about the knife you love the most. Which knife do you love best? It can be one you carry, one from your past, one you wish you had, one someone used to save a life or otherwise do something significant, etc.
Use the form below to explain why the knife is so special to you. Include a picture if you have one.
BLADE will choose the best stories for a feature here on blademag.com.
Draconian New Jersey ivory ban includes the ancient ivory of animals that have been extinct for millennia. (SharpByCoop.com image)
New Jersey Gov. Chris Christie signed the nation’s most draconian ivory ban into law yesterday, one that targets not only elephant ivory but also the ancient ivory of animals extinct for over 10,000 years!
The ban also contains wording that appears to make it possible for the mere possession of any ivory to be an offense punishable by law.
According to Knife Rights, the measure bans the “import, sale, purchase, barter or possession with intent to sell” ivory from any species, including ancient ivory from mastodons and mammals, with no exceptions whatsoever.
The part of the measure that reads “possession with intent to sell” is especially disturbing as those with any experience with the law know that such language is open to any number of interpretations by law enforcement and prosecutors.
In other words, the language of this ban could make mere possession of ivory an illegal act. At the very least, it could make those wrongfully charged with possession with intent to sell have to spend the money and time to hire a lawyer, miss time from work, etc., that fighting such a charge can require.
Of course, as has been noted elsewhere, the banning of ancient ivory—that is, of animals that have long been extinct—flies in the face of the purpose behind other such bans. The stated purpose of those bans is to save living animals. A ban against extinct animals can have no effect on those animals because they have been dead for millennia. Of course, some may argue that ancient ivory may be mistaken for elephant ivory and thus should be banned, but that is a specious argument because there are scientifically proven ways of telling ancient ivory from elephant ivory.
The ban will go into effect in six months, during which time those in the Garden State who own ivory items must sell them or face fines of $1,000 on the first offense and $5,000 on the second.
For more information on how you can help fight draconian ivory bans and, at the same time, help save the elephant, visit elephantprotection.org.
For the latest knives, knife news and more, stay tuned to blademag.com.
Tips and tricks to get the most out of attending a knife show.
Magazines, websites, and social media only give you a two-dimensional look at a knife. Nothing replaces the experience of handling a knife in person. While the internet is convenient, it cannot match the visceral sensation of holding a knife at a show.
There are many knife shows across America. Some are big, like the BLADE Show, while others are smaller, regional events. All shows have one thing in common: custom knives. Makers offer blades in many styles, materials and price ranges. No matter the show’s size, you can gain an advantage—and get the knife or knives you want—by research.
Today, even smaller shows have websites or social media pages listing exhibitors. The exhibitor list will help you identify who will be at the show. Before every show I attend or consider attending, I go through this list, looking for both familiar makers and those of whom I am unfamiliar. In particular, I look for makers from outside the U.S. From this, I create my own list.
For unfamiliar makers, I visit their websites or social media pages to explore their knives. This research allows me to refine my list and home in on those I’m truly interested in. Once my list is complete, I prioritize the makers whose knives I want to see and handle.
The ladder damascus on Steve Randall’s 8” bladed fighter hits the right balance between understated and complexity. (Alison Randall image)
The floor map is another invaluable tool for show planning. As its name implies, it is a map showing the location of each maker’s table or booth. The combination of the exhibitor list and the floorplan provides me with the first advantage of my show game plan—time management. The other aspect it helps with is money management; researching gives me an idea of how much a specific maker’s knives will cost. I adjust my priorities accordingly.
Bargain Hunting
Knowing who’s at a show out of the way, the next step is to use the various social media platforms again to discover what the makers are bringing to the show. Many show off the knives they are planning on displaying and selling well before the actual event. This helps me identify style, materials and prices of which I’m interested. Often, this information also further helps prioritize my list.
Note, due to constraints imposed by some social media platforms, pricing is not always included in knife descriptions on these platforms. There’s an easy way around this, given that there is nothing wrong with sending the maker a message asking for the price. Realize, for many makers, pricing the knife can be as challenging as making the knife. But knowing the price allows you to compare other makers’ prices for similar work.
Becoming familiar with pricing across the spectrum of a particular knife sector—say, bowies, EDC or hunting knives—ultimately helps you get the best knife for your money. And the best value often is a new maker discovered during list research. I make it one of my goals to find a new maker whose work I am unfamiliar with at every show I attend. While I am not successful every time, many of the makers I work with today I found exactly through this method.
Personal Logistics
An homage to a classic design from BLADE Magazine Cutlery Hall Of Fame® member Bob Loveless. The author contends this is one of those knives you can only appreciate its lightness and quickness when it’s in your hand. (Karis Fisher image)
Research shouldn’t solely focus on the who and what at a show’s tables and booths. There is also a bevy of other factors to consider beforehand to make a show more pleasant.
It might sound obvious, but know where the show is located. Some smaller shows I have attended have been off the beaten path and difficult to find. I personally get frustrated having to hunt around for a venue, only to end up there after it’s already open.
Identifying the show hours is also crucial, as is understanding how most events organize their hours of operation. Most shows open earlier on the first day than on the second or third day. The inverse is generally true for closing—the last day usually ends earlier, especially for three-day shows.
It’s a good idea to also consider the restaurants you’ll eat at and the hotels you’ll stay in. The larger the show, the more crowded the restaurants and hotels. This is especially true with a large group; heading to a show with friends, plan on reservations for both room and board.
Don’t assume parking is right outside of the show’s location. That’s a recipe for trouble. Do your research and see if there is plenty of parking, where it’s located and, at some venues, how much it costs.
The final consideration is actually getting into the show—your tickets. If the show offers advance tickets, I recommend you purchase them before you arrive. You don’t want to be standing in line when the doors open.
Show Etiquette
Beautifully spartan, Mike Malosh executes an extremely clean hunter that’s built for dead-serious work. (Robertson’s Custom Cutlery image)
It should come as no surprise that those attending a show are focused on the knives they came there to see. But don’t let your focus make you into a poor or even rude show attendee. Here are some recommendations to keep in mind while at the maker’s tables.
When in doubt, ask for permission to handle a knife. Makers want you to; they just want you to do so respectfully.
If you have children with you, watch their little hands. They want to grab the knives just like everyone else.
Replace the knife where you found it. Set the knife down and don’t just drop it on the table.
For those knife fighters out there, limit your moves at the table. Those knives are sharp!
Don’t put your drinks, backpacks, bags, etc., on the maker’s table. Accidents happen, and no one wants a knife scratched or damaged.
Wait for your turn. At a crowded table, more than one person has been cut trying to grab a knife.
Jason Clack has a lot going on with his liner lock, from it’s 3.5-inch damasteel blade to black Timascus bolster and mammoth ivory scale. (Jocelyn Frasier image)
Take your non-knife-related conversation away from the front of the table. Don’t block the table from potential customers.
Everyone loves a deal, but no one wants to be insulted by a lowball price. Makers may adjust their price, but ultimately, that is their decision. That said, cash can tip the negotiation in your favor.
Ask as many questions as you like. Education directly from the maker is part of your admission price.
Here’s The Deal
Like the makers, dealers range from brand new to very experienced. Also, like makers, many have specialties. Unlike makers, they deal in the aftermarket. The prices they ask for knives, and are willing to pay for knives, are based on current market prices. Like many collectibles, those prices fluctuate based on several factors.
A stunner from GTC Enigma, the titanium-handled spring-loaded tab opener is lightning fast. Even at first blush, this pocket gem looks like it’s built for speed. (GTC Knives image)
Additionally, keep in mind that when trying to sell knives to a dealer, you walked up to their table. The price they offer you may not be what you were hoping for. There is no reason to swear at them, call them names or accuse them of low-balling you. I have turned down thousands of knives because I didn’t think I could resell them. It was as simple as that.
Plan For Success
Even with a three-day show like the BLADE Show, time quickly slips away. Having a plan to get into the event and to the makers, in turn, the knives you’re interested in ensures you’ll have a good experience. In essence, it comes down to time and money—be sure to get the most out of each!
Maker: Bob Earhart Model: Frame Handle Fighter Blade Length: 7.5” Overall Length: 12.3” Blade Steel: 5-bar Turkish twist damascus Guard Material: Blued 1018 Steel Handle Material: Mammoth ivory Leather Sheath: Custom-made by the maker Comments: The knife has excellent balance and handle ergonomics. The frame handle is forged to shape, revealing the pattern. Bob is an ABS master smith. His BLADE Show Table Number is 19S. Price: $1,700 Email Address:[email protected]
Maker: Steve Randall Model: Damascus Fighter Blade Length: 8” Overall Length: 13” Blade Steel: Ladder pattern Damascus Guard Material: Browned carbon steel Handle Material: Desert Ironwood Leather Sheath: Custom-made by the maker. Comments: Contoured guard and handle create a knife with excellent balance and comfort in the hand. Precise ladder pattern damascus, competent work from an ABS master smith. BLADE Show Table Number is 3R. Price: $1,800 Email Address:[email protected]
Maker: Steve Gatlin Model: Loveless Style Chute Knife Blade Length: 4.5″ Overall Length: 9.25″ Blade Steel: CPM 154 Guard Material: Stainless steel Handle Material: Exhibition-grade Desert Ironwood Leather Sheath: Custom-made by the maker Comments: Steve’s exceptional version of the classic Loveless Chute. Light and quick in the hand. BLADE Show Table Number is 7E. Price: $1,400 Email Address:[email protected]
Maker: Mike Malosh Model: Bear Hunter II Blade Length: 4.5” Overall Length: 9 1/8” Blade Steel: W-2 Guard Material: Stainless steel Handle Material: Leather Leather Sheath: Custom-made by the maker Comments: Excellent balance and handle ergonomics. Classic look. It is built for serious work. BLADE Show Table Number 6O. Price: $425 Email Address:[email protected]
Maker: Jason Clark Model: 77 Liner Lock Blade Length: 3.5” Overall Length: 8.12 Closed Length: 4.5” Blade Steel: Damasteel Bolster Material: Black Timascus Handle Material: Mammoth Ivory Opener: Flipper Lock: Liner Clip: Black Timascus tip up Comments: Sleek and smooth. Great lock up! BLADE Show Table Number is 12E. Price: $1,550 Email Address:[email protected]
Maker: GTC Knives Model: Enigma Blade Length: 4″ Overall Length: 9 Closed Length: 4.5″ Blade Steel: Stainless steel Damascus Handle Material: Titanium Opener: SLT (spring-loaded tab) Lock: Inset liner Clip: Titanium tip up Comments: Slick and smooth. Next-level construction and precision. This knife features screwless and toolless construction. WOW. Blade Show Table Number 19A. Price: $3,500 Email Address:[email protected]
The Gerber Freeman Hunter is our “Knife Of The Day” for the 1st of December.
A past “Best Of The Best” honoree of Field & Stream magazine, the straight knife features a polished pear wood handle, a 3.25-inch blade of AUS-8 stainless steel with a full-length tang, and a single guard. Includes leather sheath. Overall length: 8.25″. Weight: 4.10 ozs. BLADE Shop’s price: $44.99.
