Knife collecting is an extremely rewarding experience for knife enthusiasts. There truly is a knife for everyone. Many increase or hold their value throughout the years, making collecting knives something to pass on to the next generation of knife collectors.
Sandra Brady of the Elephant Protection Association urges citizens of Washington state to fight against a new anti-ivory initiative.
A ban-all-ivory law supported by billionaire Microsoft co-founder Paul Allen and other 1 percenters is on the ballot in Washington state and will succeed unless you help stop it NOW!
The measure, I-1401, would ban not only elephant ivory but also the ivory of mastodon, mammoth and other extinct species.
Sandra Brady of the Elephant Protection Association said help is needed at the grassroots level to defeat the measure supported by rich billionaires such as Allen and other non-governmental organizations, which have raised more than $2.7 million—including $1.7 million from Allen—in an effort to pass it in the state legislature.
“It really is a David versus Goliath situation,” she observed of the fight against the 1 percenters who are supporting I-1401. She urged those who oppose the bill to write their local newspapers and use social media to voice their opposition. “On the upside we are having an impact,” she said of the grassroots effort. “On the down side, the more states that pass such ridiculous measures, the more likely other states will follow suit. This is why your help to defeat this in Washington state is so important.
“Write letters to the editors of the state’s newspapers, use your voice on Facebook and other social media. Help us get the word out that I-1401 is a bad law and should be voted down.”
A small organization, the Legal Ivory Rights Coalition Committee (LIRCC), is fighting against Allen and the other fat cats who are supporting I-1401. However, the LIRCC has no budget and relies on people contacting newspapers and working social media to spread the word. The good news is that editorial pages across Washington state are calling I-1401 misguided. While acknowledging the noble goal of preserving elephants, many editorial pages recognize the futility of a state law designed to stop crime in Africa and Asia. It would punish the state’s citizenry without stopping poachers. They also recognize the redundancy with existing federal laws that prohibit import of ivory and other endangered species, together with the unnecessary burden it would place on the state’s fish and wildlife officers.
Recommended:
Stay abreast of the latest developments on this and many more knife rights issues with a subscription to BLADE.
Zero Tolerance announces a new knife category called ‘factory custom’ done in concert with Rick Hinderer. (Kershaw knife image)
Zero Tolerance’s Model 0392 “factory custom” collaboration with Rick Hinderer is not only a new knife idea, it might be an entirely new knife category.
Here’s how it works: Hinderer makes and supplies the knife parts such as the pocket clips, screws, spacers, filler tabs, standoffs and other furniture and Zero Tolerance employs them in the manufacture and assembly of the resulting knife—thus the name, ‘factory custom.’ The initial parts will be titanium anodized cool blue.
According to a ZT news release, “While we’ve often worked with custom knifemakers … we’ve never had this kind of partnership before. Now, working together, we can create knives with true custom details, while producing quantities that would be impossible for a custom knifemaker.”
The resulting factory custom knives will also offer “after-market customization.” Customers will be able to buy the furniture from Hinderer with different finishes, anodized in different colors, etc. The furniture may even come in different materials, including copper, to go with the standard titanium. The different finishes, anodizations, etc., apparently will come later.
An award-winning custom knifemaker out of Shreve, Ohio, Hinderer is best known for his XM-18 folder, and his knife lotteries are always among the best attended. He also has been expanding his knife operation to offer semi-production-type knives. He had a booth at the recent BLADE Show, where he celebrated exhibiting at his 25th consecutive rendition of the event.
A flipper folder, the 0392 will feature M390 blade steel, a titanium handle and the KVT ball-bearing opening system.
For the time being, the factory custom project is in the formative stages. Exactly how many of the knives will be made or when they will be available remains unknown. Stay tuned to Zero Tolerance and blademag.com for more details.
Looking back, the majority of Gil’s one-of-a-kind custom fantasy knives were of my design, from our beginnings in ’83 with our “Dragonfly” up until the present day. In fact, we have done over 50 collaborations. That is a lot of grinding! It is no wonder Gil has often said “Paul’s dreams are my nightmares!”
The first fantasy knife I designed for Paul Fox we named the “Soulseeker.” It went on to win the coveted W.W. Cronk Award at the 1986 Knifemakers’ Guild Show. That was a great honor. Of the many knives I have designed over 25 years, it is one of our best achievements.
But alas, my name is nowhere to be seen in “Raise A Glass To The W.W. Cronk Award” on page 78 of the April 2009 BLADE. The ’85 winners are listed as collaborators, so I am sure you will take this opportunity to correct this piece of our knife family history. I, and posterity, will be eternally grateful!
Paul W. Ehlers
P.S.: I can recall at the first shows I attended, the “Father of American Knife Photographers,” Cutlery Hall-Of-Famer Jim Weyer, would take me around to the tables and introduce me as “the next Bud Cronk.” This was 1983. The only thing was, I had never met Mr. Cronk and had not seen any of his work until Jim published his first Knives: Points of Interest book. When I asked about Cronk, Jim said, “Don’t worry kid, you’re in good company!” I never forgot that. Of course, over time I came to know what a true genius Cronk was and is. This is one of many reasons why this award means so much to me.
Many American families have their share of veterans. In fact, you could say America is one big family of veterans. With that in mind, today is Veterans Day, the day to thank all the veterans you know—those in your family and those everywhere—for keeping America safe.
My Grandfather Frank was in the Army and drove an ambulance in Europe during World War I. My dad was in the Navy during World War II and served as a radar man on the USS Cimarron, an oiler that serviced many of its sister ships in the Pacific Theater. He never talked much about the war but I know he enjoyed his time and the friends he made while in the service. He and Mom were married in 1942 and she supported him throughout the conflict. She gets a lot of credit, too.
Dad’s brother, my Uncle Jack, also served in the Navy during the war, as did my great Uncle Grady. He was in the Army Air Corps. My Uncle Joe served on the USS Hancock, an aircraft carrier, in the 1950s. I served in the Navy during the Vietnam War era and was stationed at Roosevelt Roads, Puerto Rico, and Little Creek, Virginia. My service helped me grow from a peach-fuzz-faced kid into a young man, and also provided me with the money from the G.I. Bill to get my college degree.
I am but one of many to come from such families. How about you? Did you serve, or did anyone in your family? Tell us about your experiences or those of your family members who served—where they served, the years, etc.
Meanwhile, of course, let’s not forget all those brave souls who paid the ultimate sacrifice for our country. Without them, none of us would be living in this great nation and enjoying the freedoms we do. Maybe there are better countries to live in, but not for me. I’ll take this one.
For the latest knives, knife trends, tips, news and much more, stay sharp at www.blademag.com.
Celebrate your family’s veterans—and all veterans—on Veterans Day. The author’s dad served on the USS Cimarron during World War II. The author’s mom is at left.
A wise man never said knives should be in color but he never said they shouldn’t be, either. Colorful knives are nothing revolutionary in the cutlery world, but it does seem manufacturers are broadening the spectrum by introducing new models with color and rejuvenating older ones. And why not? Unless you’re a dark-ops type or desire to keep a low profile in life, a little spice in the knife can add personality to your carry.
A lot of color to be had in the cutlery world includes, from left: Steel Will Scylla Blue, Bear & Son 5-inch Pink Butterfly, Puma SGB Orange Featherweight Hunter and SOG-TAC CA Auto.
Bear & Son 5-Inch Pink Butterfly
Bear & Son 5-Inch Pink Butterfly
Bear & Son has been making butterfly knives since 1991, and the 5-inch Pink Butterfly is a bright send-up of one of the company’s most popular models. The 5-inch skeletonized handles are zinc with a bright pink powder coat, and a pivoting T-shaped gate lock at the bottom joins them when fully employed. The handle halves rotate off two pivots on the short tang clip-point blade, with a stop pin at the base. The Pink Butterfly’s pivots are very slick with no drag and the T-lock joins them firmly once employed.
Butterfly knives are simple in their mechanisms but require dedicated practice to employ safely and effectively. The basic idea is to grasp the handle, flip the blade out, and then quickly orient your hand to grip the two halves. Expert users employ the blade and launch into a plethora of flipping techniques in the blink of an eye.
The Bear & Son Pink Butterfly made quick work slicing up link sausage for a pot of jambalaya
Heck, butterfly knife users have to eat just like everybody else, so I locked the blade down and took to the kitchen, using the knife to slice link sausage for a pot of jambalaya. The Pink Butterfly performed quite admirably and the color kept this chef, dare I say, in the pink.
Bear & Son 5-Inch Pink Butterfly
BLADE LENGTH:4.25”
BLADE STEEL:440 stainless
BLADE PATTERN:Clip point
HANDLE MATERIAL:Powder-coated zinc
SPECIAL FEATURE:T-latch at base
WEIGHT:5.33 ozs.
CLOSED LENGTH:5”
COUNTRY OF ORIGIN:USA
MSRP:$55.99
SAFETY ORANGE SLICER: The Puma SGB Orange Featherweight
The Puma SGB Orange Featherweight
The Puma SGB Orange Featherweight Hunter is the newest rendition in the company’s Warden line of lockback folding hunters. It lightens the load to a svelte 2.8 ounces thanks to its 5-inch G-10 composite slabs, shaving two ounces off the standard Warden model. An added feature not seen on many folding hunters is a blade-tip-up pocket clip, 2.25 inches long, on the base of the back slab. The G-10 has a checkered texture which does a nice job of enhancing the grip.
The blade offers up a long-pull nail nick with fine gimping on the lower spine to enhance grip. I tested the edge on 3/8-inch synthetic rope and it easily sliced off short lengths in one slice, so I jacked it up to two. No problem. I tried three lengths side by side with firm pressure and lopped them off as well. Like so many folding hunters before it, the lightweight Puma would serve up light field chores and skinning in spades. While the bright handles make the Puma Orange Featherweight Hunter stand out, an OD green model is available if you’d like a more subdued color.
The Puma SGB Featherweight carries blade tip up via its handy pocket clip.
CRIMSON CUTTER: The SOG-TAC CA Crimson
The SOG-TAC CA Crimson
The SOG-TAC CA Crimson is especially designed to be street legal in California, where blades on automatics must be 2 inches long or less. The knife uses the SOG-TAC Mini handle in an aluminum anodized an attractive crimson color, with a push-button blade release on the front. SOG adds a slide safety to keep everything in check when not in use, and there’s also a blade-tip-up pocket clip.
Handle size is, indeed, a subjective thing. While the author had around 3/4 of an inch left in his mitt, the SOG-TAC Auto CA handle fit his girlfriend’s hand perfectly. “I still wouldn’t hesitate to carry this little powerhouse,” the author noted.
I was somewhat familiar with this folder because I’ve carried the larger 4.5-inch version in my rotation. Push the SOG-TAC CA’s button release and the blade opens clean and crisp at the blink of an eye. While its blade length is limited, it’s also a nice little EDC. I tested the edge on some tough quarter-inch-thick two-ply corrugated cardboard, and the AUS-8 stainless steel cut it across the grain in clean, easy strokes.
The SOG-TAC CA Auto did its due diligence as a competent everyday carry. It did an excellent job of taking off against-the-grain slices of thick corrugated cardboard.
I have medium-size mitts and the SOG-TAC CA handle left about a 3/4-inch deficit in padding on my lower palm. I let my girlfriend try it and it fits her hand just as the larger-size SOG-TAC fits mine. In fact, she said she wants one!
SOG-TACCA Auto Crimson
BLADE LENGTH:1.9”
BLADE STEEL:AUS-8 stainless
BLADE PATTERN:Trailing point
HANDLE MATERIAL:Anodized aluminum
SPECIAL FEATURE:Push-button release/safety
POCKET CLIP:Blade-tip-up carry
WEIGHT:2.5 ozs.
CLOSED LENGTH:3.75”
COUNTRY OF ORIGIN:China parts/U.S.assembly
MSRP:$129.95
BIG and BLUE: The Steel Will Scylla Blue
The Steel Will Scylla Blue is a full-size linerlock folder with an interesting twist: it has a top flipper as opposed to the typical side-winder on most folders with thumb studs. The knife features a vibrant, curvaceous handle with a fine fabric texture to enhance grip. A kidney-shaped lanyard hole is designed into the curved base and on the back slab is a blade-tip-up pocket clip.
Steel Will’s Scylla Blue has a deeply ground blade ready made for carving wood. Starting with fine slivers the author moved up the ladder to take off large curls, ending with a nice pile of fire starter.
Top flippers take some getting used to, but like anything else practice makes perfect. Rather than pushing the thumb stud out,the thumb pad or side of the thumb rotates the stud up and over the top of the handle until the blade locks.
The Steel Will Scylla Blue has a top flipper that, once mastered, opens in just a flick by rolling the thumb stud over the upper handle. Here the author uses the right side of his thumb to do the opening chores, though the thumb pad will work just as well.
I tested the Scylla Blue’s deeply ground blade on boxwood. Starting with short slivers of tinder and moving up to long curls, I had a nice pile of fire starter before long. The edge did its job well aided by a comfortable handle grip that fit my palm nicely. If you can master the top flipper, you’ll like the Steel Will Scylla Blue.
Steel Will Scylla Blue
BLADE LENGTH:3.25”
BLADE MATERIAL:D2 tool steel
BLADE FINISH:Stonewashed black
BLADE PATTERN:Drop point
HANDLE MATERIAL:Blue G-10
ACTION & LOCK:Top flipper and linerlock
LINERS:Stainless steel
POCKET CLIP:Blade-tip-up carry
WEIGHT:4.42 ozs.
CLOSED LENGTH:4.5”
COUNTRY OF ORIGIN:China
MSRP:$69.99
Discover the craftsmanship behind unique designs, from carbon steel to mosaic damascus, and learn what makes a perfect hunting knife.
The primary trend that has emerged in custom forged blades over the past 18 months is the growing popularity of the hunting and utility knife. The options seem limitless, from forged carbon steel and Micarta® to mosaic damascus and ivory.
The best seller among the group is the carbon steel hunter featuring a Micarta handle. An excellent example is from award-winning ABS master smith Josh Fisher—world-class craftsmanship at an affordable price. Designed for serious work, this knife will last, if properly maintained, for the owner’s lifetime and beyond.
One of my favorites is a hunter from Slovenian knifemaker Jan Hafinec featuring the unique hamon of his Bonfire Hunter. Jan’s hamon looks like flames streaking across the blade. He achieves the distinctive look by cleaning the grind and normalizing the blade. He then applies Satanite* clay to the blade in the desired shape for the hamon. After drying the clay, he puts the blade in his electric kiln. Upon removing it from the kiln, he plunges the blade into fast-quenching oil to give the hamon its fiery look.
Maker: Wess Barnhill Model: Drop-point hunter Blade Length: 5” Blade Material: San-mai of 1075 carbon and 410 stainless steels Guard and Buttcap: Stainless steel Handle Material: Sambar stag Overall Length: 9.75” Sheath: Leather model custom made by Wess Barnhill Knife to know: Wess is an ABS journeyman smith His price for a similar knife: $825 (Robertson’s Custom Cutlery image)
A steel construction that has been a favorite of collectors for several years now is san-mai. A hunter by ABS journeyman smith Wess Barnhill has a great example of a san-mai blade, featuring a carbon steel core sandwiched between outer layers of stainless steel. One of my favorite aspects of this type of laminated blade is that each one is unique, encouraging collectors to have more than one in their collection, if they so choose, as no two are the same. Barnhill’s blade material of choice is a 1075 carbon steel core sandwiched between two pieces of 410 stainless steel. He likes to zip-weld all the edges together, as this keeps out the oxygen while forge welding. He sets the temperature to 2,350 F° for 10 minutes to produce his san-mai blades.
Copper San-Mai
Maker: Dan Lewis Model: Drop-point hunter Blade Length: 4.5” Blade Material: Forged san-mai w/a core of W-2 tool steel, an outer layer of damascus and a middle layer of copper Guard Material: Bronze Handle Material: Desert ironwood Overall Length: 9” Sheath: Leather model custom made by Dan Lewis Knife to know: Dan is an ABS journeyman smith His price for a similar knife: $550 (Robertson’s Custom Cutlery knife image)
Seeing the work of ABS journeyman smith Dan Lewis at the 2024 BLADE Show, I was immediately drawn to it. His unique copper damascus san-mai features carbon steel, damascus and copper. He also offers the same style of blade with nickel if you prefer. He explained that monosteel and damascus blades are forged to shape and taken through a precise heat treatment. Copper san-mai blades are a different story.
“Once I create the billet—layering high-carbon steel with pure nickel damascus and copper—I do very little forging beyond drawing out the tang. The rest is done through careful grinding,” he explained. “Precision is everything. The billet must be measured exactly to keep a consistent core of high-carbon steel, with even layers of damascus and copper on each side. Copper looks great but it doesn’t belong on the cutting edge. I always use a high-carbon core for strength and sharpness. When it comes to etching, combining pure nickel and copper allows me to use a stronger, proprietary acid. The result is a deep, dark etch in just seconds, creating a bold finish that highlights every layer.”
Dan combines the copper damascus san-mai with blued fittings and desert ironwood to create an eye-catching work of art at an affordable price.
Maker: Josh Fisher Model: Drop-point hunter Blade Length: 4.5” Blade Material: 1084 carbon steel Blade Finish: Satin Guard Material: Stainless steel Handle Material: Vintage Westinghouse Micarta® Overall Length: 8.75” Knife to know: Josh Fisher is an ABS master smith Sheath: Leather model custom made by Josh His price for a similar knife: $550 (Robertson’s Custom Cutlery image)
I saw ABS journeyman smith Bob Earhart’s knives on the internet while working on my checklist for the BLADE Show. I contacted him several months before the show to discuss his knives. In addition to his excellent knifemaking skills, the use of a blued guard and bronze spacer in conjunction with presentation-grade desert ironwood gives his hunter a stunning look. Instead of using a forge press die, Bob grinds a ladder pattern into his steel billet. Grinding toward the edge, he cuts deeper and then hammers out the grooves, creating a complete ladder pattern throughout the blade.
Additionally, Bob has the one skill that many knifemakers lack: effective communication. He encouraged me to provide my input and kept me informed about the knife build every step of the way. When I buy my first knife from a knifemaker, I really appreciate that.
Frame-Handle Jewel
Maker: Steve Randall Model: Frame-Handle Hunter Blade Length: 4.75” Blade Material: Feather-pattern damascus Guard and Frame: Feather-pattern damascus Handle Material: Mastodon ivory Overall Length: 9.5” Sheath: Leather model custom made by Steve Randall Knife to know: Steve is an ABS master smith His price for a similar knife: $1,400 (SharpByCoop image)
The frame-handle hunter is arguably one of the more difficult knives to build. Add mosaic damascus and ivory to the equation and it becomes even more challenging. Given the complex nature of ABS master smith Steve Randall’s frame-handle hunter, I asked him to explain his process for building the knife.
He starts by making a billet of a W’s-pattern damascus. The layer count and stack are personal preferences. The lower the count, the wider the pattern. Once the billet is formed to the preferred layer count, Steve cuts it into pieces, restacks the pieces, and forge welds them back together. He splits the resulting stack in half using a dull wedge and welds the two halves back together to create a feather damascus billet. The splitting process with the dull wedge is what drags the hot steel to make the feather design.
Steve pointed out that increasing the layers also increases the potential for flaws. Often, the flaws don’t reveal themselves until the blade is being ground. If flaws are discovered, the blade must be thrown away and all those work hours are lost. (Author’s note: Please understand that due to the increased degree of difficulty and risk of blade failure, any mosaic-type of damascus used in the knife’s construction will increase the price. All damascus is not equal!)
Steve said the most challenging part of a frame-handle knife is connecting the frame to the guard or ferrule so there are no gaps and the fit appears seamless. Also, how the handle is attached to the blade is key. There are various ways to attach that can add to the complicated nature of a frame, for example, hidden pins, hidden finial, external finial, etc.
Changing Conditions
Maker: Jan Hafinec Model: Bonfire Hunter Blade Length: 5” Blade Material: Forged C105 carbon steel w/double hamon Guard Material: Bronze Handle Material: Desert ironwood Overall Length: 10 1/8” Sheath: Leather model custom made by Jan Hafinec His price for a similar knife: $600 (Robertson’s Custom Cutlery image)
In the March BLADE®, I wrote about the matrix I use to determine which knives to buy. Before that story was published, BLADE Editor Steve Shackleford asked me what conditions would cause me to adjust my matrix. One condition would be a change in the popularity of a market sector, such as custom fighters, gut hooks, stilettos, etc. With a current slowdown in damascus bowie sales, primarily due to the bowies’ price point, an alternative emerged, offering many of the same options at a more affordable price: the forged hunting knife.
One of the best aspects of attending a knife show is the ability to compare knives, apples to apples if you will. This year’s BLADE Show resulted in me updating my matrix with regard to custom hunting knives.
Before the show I provided a set of parameters to 10 ABS journeyman and master smiths, both domestic and international, to build a damascus hunting knife to my specifications Those parameters were: a 4.75-inch ladder-pattern damascus blade, damascus guard (no pattern specified), and a wood handle (no wood specified). The smiths’ quotes ranged in prices from $600 to $1,250 per knife.
Still think you don’t need your own matrix?
*CAUTION: When using Satanite hamon clay, “wear protective gloves, outfit, and face and eye protection. If on skin, wash with soap and eater. If on eyes, rinse with water for several minutes. If eye irritation persists, get medical attention.”
Recommended:
