See how an over-the-counter Henckels survives the Breed test.
This time I decided to hit the local retail store trail for a knife just about anyone can buy anytime. Nothing tweaked my fancy till I hit a major chain store. There I found an inexpensive Henckels Everpoint 8-inch chef’s knife. Well, let’s just say I’m impressed with the quality of the Henckels. Read on and see why.
Henckels Everpoint Sharpness Test
The knife had to slice paper once more to see if the horn whacks did any harm the author could not feel. It was still slicing and dicing like in the beginning.
First was the 20-pound-bond-copy-paper slice. The knife was very sharp and aggressive slicing the paper. I had to take care not to skin parts of my finger off. As fast as I could move, I could slice the paper. The knife was off to a great start.
Henckels Everpoint Food Prep
The knife sliced the tomatoes fast without mushing them and produced very thin slices.
Now to use the Everpoint for its intended purpose: food preparation. I picked some cherry tomatoes and the last yellow squash from the garden. The knife sliced the tomatoes fast without mushing them. I could get very thin slices. The same went for the yellow squash. The knife was light in hand and well balanced.
Henckels Everpoint Medium Duty Tests
The Henckels surprised the author by making 200 crunching cuts in the sisal rope, and the knife was ready for more.
The rest of the test was to see how far the knife would go before the edge failed. Getting my technique down with some single-walled cardboard, the chef’s knife sailed through it aggressively with no problems. Very nice!
Next was some whittling on pine. The Henckels gave me some very smooth curlicues. I was surprised at how controllable the knife was, from very fine shavings to deep bites with heavy pieces. It’s a lot different whittling with an 8-inch chef’s knife but it came through with flying colors.
Skiving 8-ounce leather was next. The knife crunched aggressively with every cut, rendering very thin slices and one close call on my finger. The leather was no challenge at all. It was still fun to do quickly and I didn’t need to apply much pressure.
Henckels Everpoint Heavy Duty Tests
The Everpoint chopped the 2×4 very well. The balanced blade and comfortable handle made it a pleasure to use. The author whacked the wood “pretty hard” but could see or feel no damage to the edge.
It was time to move into the big leagues by chopping into part of a 2×4. The Everpoint chopped very well. The balanced blade and comfortable handle made it a pleasure. I was whacking pretty hard into the wood but I could see or feel no damage to the edge.
All knives have to cut sisal rope. No exceptions. The Henckels surprised me by going for 200 crunching cuts and was ready for more. The plastic scales were extremely comfortable. The knife floated in my hand on every cut. Heat treatment grade: excellent.
I returned to the paper slice to see if the edge had slowed down any. Nope, it sliced just as fast as before. This chef’s knife cuts!
All right, with such a thin blade I figured an antler chop should knock the edge down a bit. Dang, it proved me wrong. Thirty hard whacks into the whitetail horn and there was no edge damage whatsoever. I’m impressed. The knife had to slice paper once more to see if the horn did some harm I could not feel. It was still slicing and dicing like in the beginning. Outstanding!
Final Cut
This chef’s knife really impressed me—low price with top end performance.
Everpoint 8” Specs Blade Length: 8” Blade Steel: Stainless Blade Grind: Flat Blade @Thickest: .09” Blade Width: 1.75” Blade Finish: Satin Handle: Black plastic Rivets: Stainless Construction: Full tang Weight: 7 ozs. Overall Length: 13.25” Country of Origin: India MSRP: $14.88
Blades and Bands Kukri is a forward-cutting knife design.
In the search for knives to test for “Spec Sheet,” I get referrals. Tracy Price is one. He’s a fairly new knifemaker but does quality work. The Kukri is a knife he made for himself to push his skills, something most makers do.
It’s always good to learn a different way to do things or a new shape. The more skills, the wider variety of knives the maker can build. No matter how pretty they look, form and function must be there. Let’s see how the Kukri functions.
The cardboard slices curled from the edge geometry but resulted in no slowing down of the edge.
For a quick edge check, I use the paper slice. The knife cut smoothly and fast. The blade shape pulled the edge through the paper. I had to control the knife’s forward weight, but after a few slices, it was no issue. It’s a sharp blade for sure.
I cut up an old postage box and used a side of it for a single-walled cardboard cut. The knife sliced aggressively and was easy to control. The slices curled from the edge geometry but resulted in no slowing down of the edge.
Kukri Medium-Duty Cutting
The Kukri smoked the leather cut.
Next up: 8-ounce leather for skiving. I shaved a thin slice of leather to remove the squared-off cut during sheath construction to get the leather to flow together. It was fairly easy to skive the leather; I just had to be careful of the excess part of the blade I was not using. In other words, I was both skiving leather and shaving wood off my workbench at the same time.
Cutting leather was one push and the edge hit bottom. The Kukri smoked the leather cut. I moved up and down the blade and couldn’t find a dull spot. The blade belly was the smoothest. Again, I forgot to check the clearance on the first cut and carved into my benchtop. I’m blaming it on the heat.
It was time to whittle some fire sticks. I easily controlled the depth of the curlicues by choking up on the handle. The knife curlicued the cedar very quickly. Yes, the Kukri can be used for finer chores, too.
Kukri Heavy-Duty Cutting
The author easily controlled the depth of the curlicues by choking up on the handle.
Chopping was next on the test menu. Finally, I got to use the Kukri and put some whacking into it. Using some red cedar firewood as a base, I started chopping kindling. One whack and I was halfway through the piece. The forward balance worked perfectly for splitting—and man, does it whack! The choil does have a sharp spot but that was easily fixed.
I went back to slicing the original piece of paper to check for dulling and/or chips. The Kukri sliced the now-damp paper very well (97° F and 90 percent humidity make paper kind of soggy). It was simply too hot to stay in the shop—test over!
Final Cut
The Kukri is an excellent field/camp knife. It’s made to chop and whack in the outdoors. However, I soften the edge of the steel at the choil.
Large Work Knife takes the author’s favorite media to task.
With camping season in full swing, it’s always a good idea to have a sharp knife at your side to build a lean-to or traps and make firesticks, to name a few. The Large Work Knife by KG Handcrafted Bladeware can fill the bill. Ground from 5/32-inch A2, a tool steel known for providing a keen edge, it begged for a good testing.
Large Work Knife Edge Test
I like to start off by slicing 20-pound bond copy paper because it gives a good idea of edge profile and keenness of the edge. The knife sliced the paper smoothly with no resistance. It’s nasty sharp for sure. Though I’m not a big fan of the chisel grind and Scandi profile edge, each has its place.
The Large Work Knife excelled cutting the 8-ounce leather, providing very fine slices at the same thickness and angle.
I grabbed a piece of double-walled cardboard and commenced cutting. The edge was very aggressive and only a slight rolling of the cut pieces occurred from the Scandi profile edge. The handle made for great control. I really like it. It worked best by using a push cut.
Medium-Duty Cutting
Leather was next. The A2 blade zipped through it very fast. The edge created a nice crunching sound as it went and was very aggressive. The wrapped handle was great at controlling the width of each cut. It was fun to do but be sure to keep your fingers out of the way. Next, I skived 8-ounce leather. The blade made short work of it, providing very fine slices at the same thickness and angle.
The knife powered through 200 clean, crunching cuts of sisal rope very quickly. The handle was comfortable and provided a non-slip grip with no hot spots.
It was time to make firesticks. The knife made great curlicues. Cut depth was very manageable. It was a perfect use for the chisel grind on the correct side for a right hander. Nicely done, KG Handcrafted Bladeware! Woods seems to be the perfect medium for this blade style.
Now for my favorite, cutting sisal rope. The knife powered through 200 clean, crunching cuts very quickly. With no stopping in sight, I ended the cuts before I used up all my rope, another great medium for the chisel grind. The handle is comfortable and provided a non-slip grip with no hot spots.
Heavy-Duty Cutting
I batonned the Large Work Knife through a 1.5-inch-diameter branch. It split the first 2 inches quickly then started to drift to one side the farther down I got. The drifting could have been due to the fact it was old wood or a chisel grind. Either way, it worked with no damage to the knife whatsoever.
Thirty hard whacks into the antler put some very small chips in the fine edge an inch or so before the tip, as the author expected. When he returned to the copy paper, slicing was smooth with minimal tearing by the chip area. The knife was still nasty sharp.
Chopping deer antler to test how well a blade has been heat treated is not recommended and might void the warranty. I did it anyway. Thirty hard whacks into the antler managed to put some very small chips in the edge, as I expected it would. The fine edge will do exactly that.
Finally, I returned to the copy paper. Slicing was smooth with minimal tearing by the chip area. The knife was still nasty sharp. Job well done!
Overall Take On The Large Work Knife
This knife is well-made for EDC chores. I love the A2 steel. The handle is very comfortable.
Changes
The knife performs well for its designed purpose. I would just run the grind higher.
Large Work Knife Specs Maker: KG Handcrafted Bladeware Blade Length: 4” Blade Material: A2 tool steel Blade Grind: Chisel Blade at Thickest: 5/32” Blade Pattern: Semi drop point Handle Material: Waxed cotton string and resin cord wrap Weight: 6 ozs. Overall Length: 8.5” Sheath: Oil-tanned cowhide over aluminum and Kevlar® Weight w/Sheath: 9 ozs. Maker’s Price: $320
The Cutlass Is A Short Sword Used For Centuries. Today, It Is Mostly A Ceremonial Blade, But One That Continues To Inspire
A sword can be more than just a weapon of war, the cutlass is an excellent example. For centuries, the cutlass was used by fighting forces throughout Europe as a short, one-handed stabbing and slashing weapon.
For many, the cutlass is best known as the sword of the pirates in the Atlantic Ocean during the 17th and 18th centuries. In a lesser-known role, it also was regularly used in agriculture throughout the Caribbean like the machete is today. In English-speaking Caribbean countries, the word “cutlass” is used to mean a machete.
In the modern era, the cutlass has left behind its fighting phase and is almost used exclusively as a ceremonial sword by several navies. However, its popularity endures among collectors and history buffs alike, thanks to its extensive use during the pirate era and the Age of The Sail.
What Is A Cutlass?
A cutlass drill on the HMS Wolverine , 1882 (Public Domain)
The cutlass is a one-handed, single-edged sword used for close-quarters fighting that was the evolution of naval sabers into a more compact, nimble short sword. While the edge does come to a fine point, the cutlass was designed for slashing and swinging at your enemies when fighting hand-to-hand.
This is why the sword was a popular seafaring weapon. With a slightly-curved blade, usually between 28-32 inches, the cutlass is adept in the close confines of a ship. The straight handle and clipped guards of most cutlasses protected your hand when in battle. Additionally, the cutlass was robust enough to tackle general maritime tasks like slicing through heavy rope or thick fabric like canvas or even wood. And its size made it the perfect weapon for the type of in-your-face fighting that would happen on the high seas.
On land, the cutlass wasn’t as dashing, mostly used to chop sugarcane and clear tracts of land in the rainforest in the New World. Though, the same qualities that made it a great fighting implement made it adept on the farm. The short, swooping blade allowed a great deal of force to transfer from the arm to the material with every swing.
Who Uses The Cutlass Today?
Today, the cutlass is used almost exclusively as a ceremonial sword. While it was at its most popular centuries ago, the cutlass was still a standard issue sword until around World War 2 before it became wholly ceremonial.
The British transitioned the sword to ceremonial duty in 1936, and the United States followed suit in 1949. Both countries incorporate the sword into military ceremonies today. The Brits issue cutlasses to naval chief petty officers. The United States also offers chief petty officers the ability to wear a cutlass with their formal dress for ceremonies and the like.
Can I Buy A Cutlass?
Absolutely. There are many companies making cutlasses today. While they may not be as pristine as the ones issued by the military, there are numerous companies making these types of blades.
Factory Cutlass Options
Cutlasses are still made today, but, in general, they aren’t built to the same combat standard as in centuries past. The vast majority of these swords are showpieces meant to be hung on the wall and start conversations. However, if you are a true lover of the Age of Sail, these swords more than fit the bill.
Windlass English Cutlass
This 30.5-inch sword from Windlass is an elegant modern Cutlass, and, for a fee, can be sharpened into a real, proper sword. As is, the high-carbon steel blade is hand forged and mated to a solid brass guard. You’ll really feel like Blackbeard with it in your hand.
The sword comes with a leather scabbard adorned with a brass tip and throat to up the visual appeal of the piece. All told, this is a high-quality replica of the cutlass that will get people talking at your next party and look great in your office or hanging on the wall.
MSRP: $190
Condor Naval Cutlass
The Naval Cutlass from Condor Tool & Knife is a more modern take on the classic blade. The first thing you notice about it is the black epoxy powder finish to the blade. We’re pretty sure pirates of the 18th century didn’t have powder-coating technology, but would have loved to have had the extra corrosion resistance on the high seas.
The blade checks in at 24 inches in length and is made from 1075 steel ground to a razor’s edge. Yes, this sword comes sharpened right out of the box for no extra fees. The smooth hardwood handle is triple riveted, and a powder-coated guard keeps your hand protected when holding the sword. A black welted leather scabbard fits snugly around the blade and keeps everything protected even if dropped.
While it certainly doesn’t look like a sword from the movies, it’s designed to be a true, proper modern cutlass.
MSRP: $148.49
Kult Of Athena Pirate Sword
Complete with a skull and crossbones etched into the scabbard’s throat, the Pirate Sword from Kult of Athena looks like it could have been taken from the set of any swashbuckling movie set.
The 22-inch blade is made from stainless steel and comes, according to KoA, moderately sharp out of the box. That means it might need a more refined sharpening at home if you’re looking for a razor’s edge. However, the blade itself is .16 inches thick, thin enough to slice well but thick enough to hold up to some wear if used for more robust cutting tasks. But be aware, the sword is classed as “decorative”, or for display only, so keep that in mind before playing out your high seas fantasies.
The cast metal handle is surrounded by a bronze-plated cup guard which features a pirate ship design. The black leather scabbard has a cast tip and throat to complete the look.
MSRP: $49
Kingston Arms Atrim Cutlass
The Kingston Arms Atrim Cutlass shows that not all collectible blades need to be centuries old. Made in the style of a naval cutlass, the Atrim utilizes modern materials and methods to make a truly remarkable sword.
The 9260 spring field falchion-style blade is hand forged and comes in a satin finish. At 25.75 inches it’s a bit smaller than some other cutlasses, letting it move more fluidly in your hand and taking up a smaller display space. The full-tang construction terminated with a stainless steel guard and pommel around a brown leather handle that provides a strong grip.
This is the most expensive sword of all the cutlasses showcased in this piece, and it’s worth every penny for the discerning, high-end collector.
MSRP: $432.95
Cold Steel 1917 Cutlass Sword
When it comes to collector pieces outside of auctions, Cold Steel’s 1917 Cutlass Sword is a prime example of what’s being made today. While it is designed for display and collection, the 1055 steel blade does come with a serviceable edge out of the box.
In terms of size, it’s exactly what you’d expect a cutlass to be. At just under 30 inches long and 37.6 ounces, it’s a nimble sword that will feel good to hold and wield when showing off all of its intricacies. The wood handle and blued steel hand guard complete the look, and the included leather scabbard keeps the sword looking classy even when put away.
MSRP: $289.99
APOC Survival Cutlass
This option is rated for proper use rather than display. That’s abundantly clear considering it comes with a MOLLE-compatible Kydex scabbard. That doesn’t come with swords meant to be hung on the wall.
The APOC is a tactical sword that has a 21.5-inch black oxide blade made from 9260 spring steel. The black G-10 handles complete the monochromatic look and provide excellent grip in myriad conditions.
At just under 2 pounds, this is a lightweight cutlass meant to be used as a survival tool out on the trail or in more intense outdoor situations. The blade is meant to slice, of course, and the edge comes to a fine point, making this a puncturing tool as well. Versatility is the name of the game in survival equipment, and, while a machete or shorter knife might be a better option, the APOC cutlass is built for the outdoors and to handle the elements.
MSRP: $169.95
Custom Cutlass Options
There are numerous people making custom cutlasses and other swords. Whether it is for the private use and display of an individual or to be used as props in movies, at renaissance fairs, or in other forms of entertainment, there are makers and smiths crafting modern versions of the centuries-old blade.
Even the popular YouTube Series Man At Arms: Reforged did an episode about the cutlass and showed multiple ways to craft them.
Tony Swatton
Swatton runs Sword & Stone in Burbank, CA and makes arms and armor for film and television. He, and his shop, were the star of the original Man at Arms series nearly a decade ago. He’s self-educated and has been making armor since he was 17.
The first movie his work appeared in was Hook in 1991, and since then his weapons have been seen on screen in more than 300 movies including massively popular films such as Pirates of the Caribbean, Batman, and Thor. He also designed the cutlass used in Assassin’s Creed 4.
David Lisch
Lisch makes custom knives and swords exclusively from damascus steel. His 26 years of experience in the field are seen in the intricacy of his mosaic patterns and one-of-a-kind blade designs. He’s made landscapes and sunrise designs on his blades.
An example of David Lisch’s damascus work.
His knives have won awards and he teaches classes in blacksmithing and knifemaking with his wife Andrea at their school in Yelm, Washington, about an hour south of Seattle.
Collecting Cutlasses
The cutlass is collected by all sorts: sword lovers, pirate aficionados and history buffs. Specialty dealers help these collectors find the pieces they are looking for, and it helps keep the cutlass alive and in public consciousness.
Additionally, cutlasses have made it to auction houses around the world, sometimes fetching as much as $10,000 before the hammer falls at auction houses like Morphy’s, Sotheby’s, and Rock Island.
In late 2022, the 1860 naval cutlass belonging to John H. Ferrell, a Congressional Medal of Honor recipient, went to auction at Morphy’s and sold for $14,760. The sale showed how, even today, the popularity of the cutlass continues to endure in a big way.
Oh, the Outdoor Edge Pivot is a budget option, but not one without its charms.
Traditionally outdoor focused—hence the name—Outdoor Edge has crept into other knife niches. Perhaps it’s a directive from the powers on high at Revo Brand Group (think Real Avid), who acquired the knife company in 2022. Or perhaps it’s because you can only make so many gut hooks and replaceable-blade caping knives. In either case, the company has come out with some intriguing EDC designs that are definitely budget options, but ones that get the job done.
Its most recent unveiling is the lightweight, skeletonized handled Pivot. For most knife enthusiasts, it’s difficult not to like what Outdoor Edge has offered up in the redesign of the company’s Le Hawk and Le Duck knives —particularly its price. A cool $30 ($29.99) puts the fixed blade on your beltline, giving you an edged tool you can treat like a rented mule and not shed any tears if a rough task delivers a coup de gras. Everybody needs one of those to pry away at rusty latches and strip spools of copper wire.
Pivot’s Steel
Constructed from 8Cr13Mov stainless steel, the knife was likely birthed in China—it’s one of the country’s budget stainless options. While inexpensive, the steel generally acquits itself well in wear and corrosion resistance but maybe doesn’t earn top honors in hardness (57 HRC) and edge retention. Though, 8Cr13Mov is known to be pretty forgiving in sharpening, so its edge is quickly regained. Outdoor Edge gives the Pivot’s blade an extra barrier to environmental factors with what it calls its Blackstone Coating, which also gives the knife a dark appeal.
Blade Profiles
The company offers two blade styles on the model, a drop-point and Wharncliffe both virtually the same length. The drop-point measures in at 2.5 inches, and the Wharncliffe is another .1-inch longer. In either case, married to a roughly 4-inch handle, the blade should prove fairly nimble and quite deft at most everyday tasks around the home, ranch or worksite. As mentioned, the handle is skeletonized, which cuts the Pivot’s weight down to a svelte 3.2 ounces. And Outdoor Edge applies a rubberized coat to it, giving the knife a fairly positive grip even if wet.
Where Exactly Does It Pivot?
Now we get to the name of the knife—the Pivot—which seem much more apt for a folder than a fixed blade. But there’s a method in Outdoor Edge’s madness, with it referring to the carrying system. The polypropylene sheath comes with a quick-release locking latch and a removable 360-degree rotating clip (there’s the pivot point) for easy attachment to a belt or MOLLE webbing. It’s a nice system, allowing the user to adjust the cant to their carry style, putting the blade at quick access no matter where it’s carried.
Most would agree the Outdoor Edge Pivot isn’t the Superman of EDC knives, nor the one somebody pulls out for bragging rights. But for a blade to use and abuse on your day’s dirtiest jobs, well it pretty well fits the bill.
Aaron Wilburn’s BodyGuard pushes the performance bounds of a hard-work knife.
ABS master smith Aaron Wilburn produces spot-on precision works of art. His mosaic damascus is gorgeous, yet he still likes to make hard-working blades. The BodyGuard is one of the latter. It’s no frills, just tuned 52100 steel and textured non-slip Micarta handles.
A lot of knowledge is poured into these heavy-duty knives. It’s a little on the larger side for an EDC, but once in your hand, it’s very hard to use anything else. I’m all about the feel of a knife in your hand and the sharpness of its blade. Aaron’s BodyGuard is spot on in both fields. So, let’s get to cutting with the BodyGuard.
Skiving 8-ounce leather, the author found the slight curve to the belly of the knife let him roll rapidly into each thin slice.
To start, I executed a simple slice of paper to check the fresh edge. The BodyGuard sheared smoothly and quickly, with the edge showing itself on the aggressive side, meaning you could hear each slice. I had to move fast with my fingers so no nicks would occur. The knife’s balance felt correct while cutting.
Next, I was on to some single-walled cardboard. The BodyGuard was slicing so fast and so sharply that none of the cuts distorted the cardboard. This is due to its full flat grind. The Cerekote coating helped, as well, reducing drag. Once more, the edge was notably audible and forceful through the material.
The BodyGuard’s plunge lines were spot on, uniform in depth and angle. This is always a sure sign of a well-made knife.
I pulled some scrap 8-ounce leather to skive. The BodyGuard made quick work of it. The slight curve to the belly of the knife let me roll rapidly into each thin slice. It was a fast enough pace that I managed to put a nick in my fingernail. The textured canvas handles proved very grippy and had a comfortable feeling. With the leather on its edge, I made more cuts, happily segmenting it without removing any of my flesh. Each cut gave me a nice crunching sound. Very sharp edge.
Laying The Wood
Using a leftover piece of pine, I did some whittling for a firestick. I ended up with thin curlicues and thick curlicue. All cuts were smooth, like they were from a carving tool. Its handle provided a positive grip on this more challenging medium and ensured smooth cuts. The finish took some wood smears, as expected, but the edge was still like a razor.
The BodyGuard was no hack in testing its edge against whitetail deer antler. The author littered his shop with antler fragments, however, the knife’s edge remained pristine.
Subsequently, I gave the BodyGuard a beating or I should say a batoning. Using a piece of seasoned hackberry, I batoned the blade into it to split some kindling. I found the false edge was ground almost too sharply; it wanted to stick into the baton piece of wood on the first two whacks. No issues after that with the BodyGuard making short work of the chunk of hackberry. I did notice the ends of the handles were a little sharp on the inside of my palm during this exercise. A few wipes of 400-grit sandpaper removed the edge. Again, more wood smears on the Cerakote, but the coating was 100 percent attached. Excellent job.
After some hard material, I tested the knife’s edge retention on 1/2-inch sisal rope. Man, does the BodyGuard cut, crunching through 200 cuts of the rope in record time. The edge felt like it was getting sharper with every slash. Even after all that, the knife remained extremely sharp.
The BodyGuard was no hack in testing its edge against whitetail deer antler. The author littered his shop with antler fragments, however, the knife’s edge remained pristine.
Finally, it was time to get busy on a whitetail deer antler with 30 hard whacks. All that did was send antler chunks all over my shop without even a micro nick on the edge. That demonstrated excellent heat treatment. And the edge still felt razor sharp.
The last step was to retest the edge on paper. The BodyGuard seemed to slice even faster after all its use. Smooth cuts through the 20-pound-bonded with no tear outs. Enough said and cut.
Bottom Line
I just make a minor softening on the end of the handle. Otherwise, the BodyGuard from Aaron Wilburn is in the top 1 percent of the knives I’ve tested. It will handle civilian, hunters and military chores with ease. Hats off to the maker.
Get an edge on your cutting needs with the latest production knives.
The 2026 production knives are defined by an impressive range of styles and sizes, spanning from 1.5-inch neck knives to massive 12-inch folders. This year’s buyer’s guide highlights a sophisticated move toward premium materials, with CPM MagnaCut and M390 appearing across diverse price points, alongside traditional touches like India Stag Bone and Damascus. From task-specific hunter sets and tactical folders to “fidget-friendly” button locks and US-made fixed blades, these releases represent the cutting edge of modern manufacturing and designer collaboration.
GiantMouse The Redington
Knife Type: Fixed Blade Blade Length: 5.1″ Overall Length: 9.7″ Blade Grind: Stonewash Scale: Double Black Canvas Micarta Blade Material: CPM MagnaCut Sheath: Black Kydex Date Available: Now Inside Edge: Designed with input from the instructors at SERE East. Limited-Run of CPM MagnaCut. MSRP: $425
Demko Knives AD22
Knife Type: Folding Blade Length: 3.0″ Blade Shape: Shark Foot Overall Length: 7.5″ Weight: 5.4 oz. Scale: Titanium (Smooth or Milled) Blade Material: CPM MagnaCut Date Available: Currently and throughout 2026 Inside Edge: Made in the USA at Demkp headquarters in New Castle, PA. Also available with G10 scale in multiple colors. MSRP: $700
Pattern: Cleaver Designer: Fabian Hobbelen Lock Type: Button‑Operated Frame Lock Blade Length: 3.09” Overall Length: 7.04” Blade Grind: Hollow Scale: Titanium Blade Material: M390 Date Available: August Inside Edge: Designed by Fabian Hobbelen, the Nyrrdreki hides a small surprise in its blade. The hole allows the knife to be flipped open with the pinky finger, turning a traditional opening feature into a playful and highly addictive fidget action. MSRP: Approx. $350
Dagger Trading Begemot
Pattern: Modified Cleaver Knife Type: Folding Blade Length: 3.88″ Overall Length: 8.625″ Liners: Steel Blade Grind: Flat Scale: G10 with 3D print Blade Material: VG10 Date Available: Now MSRP: $71
Vero Engineering Aura
Knife Type: Folding Blade Length: 3.3” Overall Length: 7.7” Liners: Steel Blade Finish: Machine Belt Satin/Stonewash Scale: Aluminum Blade Material: 14C28N Date Available: Summer 2026 Inside Edge: The Aura has a reversible wire pocket clip. MSRP: Approx. $100
Bear & Son Cutlery Locking Farmhand w/clip
Pattern: Drop Point Knife Type: Pocketknife Blade Length: 2.75” Overall Length: 6.375” Closed Length: 3.625” Locking Mechanism: Lockback Handle: Genuine India Stag Bone Blade Material: High Carbon Stainless Steel Date Available: Now Inside Edge: Made in Alabama MSRP: $56
Knife Type: Fixed Blade Blade Length: 3.6″ Overall Length: 7.48″ Pattern: Drop Point Scale: Textured Black G10 Blade Material: 154CM Sheath: Black Custom-Fitted Kydex Date Available: Now Inside Edge: Handcrafted by Boker USA in Denver, Colorado. Perfect for bushcraft, hunting, survival, trekking, camping & EDC. Also available in a high-visibility orange G10, MagnaCut version. MSRP: $200
Maserin 917 Woodsman
Pattern: Bushcraft Knife Type: Fixed Blade Blade Length: 4.01” Overall Length: 9.21” Weight: 6.35 oz. Blade Grind: Flat Scale: Brown Paper Stone Micarta (Also Available In Green Jute Micarta and Black Denim Jeans Micarta) Blade Material: Nitro X7 Blade Finish: Stone Washed Sheath: Black Italian leather sheath with removable dual belt loop position and hook. Date Available: Now MSRP: $ 215
CRKT Orochi
Knife Type: Folding Knife Lock Type: Frame Lock Blade: Clip Point Blade Length: 3.55″ Overall Length: 8.16″ Liners: Titanium Blade Grind: Flat Scale: Titanium With Damascus Bolster Blade Material: Damascus Date Available: Now Inside Edge: Named after the legendary Japanese serpent and its presence in anime, the Orochi features flowing lines, including a clip point, recurve blade, for balance and precise handling. The knife can be deployed either with discreet flipper tab, mirroring the custom knife its inspired by, or by its dual thumbstuds. MSRP: $200
Big Idea Design Ti Manu
Designer: Ken Onion Jr. Overall Length: 7.5” Blade Length: 3.25” Blade Steel: S90V Blade Shape: Modified Drop Point Handles: Grade 5 Titanium Opening: Dual Thumbstuds Date Available: August Inside Edge: All Big Idea Design knives only have 2 screws, The pivot and a screw in the back for the reversible pocket clips. The Ti Manu also was designed to work with both Phosphor bronze washers and bearings. Both options will be included so people can swap them out at will. The lock face is an integrated ceramic ball bearings in lieu of an insert, so it has a super smooth travel and lockup. MSRP: $250
Civivi Knives Kitefin
Knife Type: Folding Lock Type: Button Lock Blade Length: 3.22″ Overall Length: 7.52″ Blade Grind: Hollow Scale: Aluminum Blade Material: Damascus (14C28N option also available) Date Available: Now MSRP: $110
Halfbreed Blades MILF-05
Action: Flipper Folder Carry: Pocket Clip Designer: Jonathan Loftes Lock Type: Frame Lock Blade Steel: CPM S35VN Blade Grind: V Blade Edge: Plain Edge & Partially Serrated options Blade & Handle Finish: PVD Coated Blade Style: Spear Point Blade Length: 3.54″ Handle Material: 420J2 Stainless Steel frame, liner, spacers; G10 scale Washers: Phosphor Bronze Overall Length Open: 8.26″ Date Available: Now Inside Edge: The MILF-05 comes pre-set with a firm action; this can be adjusted for speed via the Torx head pivot point. MSRP: $240
Bear OPS Load Out
Pattern: Drop Point Knife Type: Folder Blade Length: 3.5” Overall Length: 8” Closed Length: 4.5” Lock Type: Liner Lock Handle: Aluminum Blade Material: 14C28N Sandvik Date Available: Now Inside Edge: Made in Alabama with assisted opening, reversible pocket clip and ball bearing washers. MSRP: $110
Liong Mah Design SFD-Small Field Duty
Pattern: Drop Point Knife Type: Folder Blade Length: 3” (2.6” cutting edge) Overall Length: 6.75” Liners: Steel Blade Grind: Flat Scale: Titanium Blade Material: CPM MagnaCut Date Available: August Inside Edge: Hand rubbed satin finish on the blade. MSRP: $278
Browning Knives Stormy Pass Fixed Small
Pattern: Drop Point Knife Type: Fixed Blade Blade Length: 3.5” Overall Length: 7.75” Blade Grind: Hollow Scale: Hidden Tang Wood Blade Material: Damascus Sheath: Leather Date Available: Now Knife To Know: Stainless Guard with black Micarta spacer. MSRP: $140
Bear Edge Light Grey Aluminum Folder
Pattern: Drop Point Knife Type: Folder Blade Length: 3” Overall Length: 7” Lock Type: Liner Lock Handle: Aluminum Blade Material: 440 Stainless Steel Weight: 3.2 oz. Date Available: Now MSRP: $43
Straightline EDC Ally
Knife Type: Fixed Blade Blade Length: 2.68” Overall Length: 5.98” Blade Grind: Flat Scale: 3D Milled Bronze Anodized Gr. 5 Titanium Blade Material: M390 Blade Finish: Black PVD + Stonewash Sheath: Black Leather Sheath With Magnets Inside Edge: Igor Bortolussi, founder of the company, named the knife after his daughter Allegra and its design is based on a drawing she made when she was 4 years old. She’s 9 now. Date Available: Now MSRP: $249
SOG Specialty Knife & Tool Kiku XR
Pattern: Tanto Knife Type: Folder Blade Length: 3.03” Closed Length: 4.30” Lock Type: XR Lock Handle: Fatcarbon Carbon Fiber Blade Material: CTS XHP Date Available: Now Inside Edge: Reversible low-carry belt clip with XR Lock, thumb hole, kick opening mechanism. MSRP: $400
BLACKHAWK Garra Fixed Karambit
Pattern: Karambit Knife Type: Fixed-Blade Blade Length: 3.25” Overall Length: 8” Handle: Black Zytel Blade Material: D2 Tool Sheath: Kydex Date Available: Now Inside Edge: Comes with conceal carry holster, removable Kydex sheath. MSRP: $160
Camillus Knives Heater Mini
Pattern: Drop Point Knife Type: Neck Knife Blade Length: 1.5” Overall Length: 3” Blade Grind: Plain Handle: G10 Blade Material: 3CR13 Sheath: Kydex Date Available: Now MSRP: $19
Pattern: American Tanto Lock Type: Button Lock Blade Length: 3.25″ Overall Length: 7.75″ Liners: Brass Bearing With Ceramic Ball Blade Grind: Flat Scale: Titanium Scales & Clip Blade Material: VG10/Copper Damascus, With Copper Pivot Date Available: Now MSRP: $170
Winkler Knives Drop Point Hunter
Pattern: Drop Point Knife Type: Fixed Blade Blade Length: 4” Overall Length: 8.625” Blade Grind: Flat Scale: Walnut Blade Material: 80CrV2 Sheath: Lined Boltaron with leather cover Date Available: Limited Availability at BLADE Texas 2026 and BLADE Show Atlanta 2026. Publicly Available June. Inside Edge: This knife was designed by combining popular features from several models to create an all-in-one blade tough enough for the hardest tasks yet aesthetically appealing enough for everyday enjoyment. MSRP: $375
Case Knives XR Sod Buster Jr.
Knife Type: Slip-Joint Folder Blade Length: 2.8” Overall Length: 3.625” Weight: 2.1 oz. Blade Grind: Flat Blade Finish: Stonewash Satin Scale: Red, White & Blue Burl G-10 Blade Material: S35VN (Stainless) Inside Edge: This knife will be made in limited quantities. “USA” is lasered into the G-10 on one end. Date Available: Now MSRP: $125
White River Knives S&S 3 Knife Chef Set
Pattern: Chef Set Knife Type: Chef, Boning, Paring set Designer: Smith & Sons Blade Length: 7.5″, 5.8″, 3.4″ Overall Length: 12.5″, 9.9″, 7.25″ Blade Grind: Flat Scale: G10 (Richlite) Blade Material: CMP MagnaCut Available: Now Inside Edge: Designed by Smith & Sons and crafted in the U.S.A. by White River Knives, this premium kitchen set includes three essential blades: a 7.5″ Chef Knife, a 5.8″ Boning Knife, and a 3.4″ Paring Knife. Together, they cover nearly every task in the kitchen—from precision prep work to heavier slicing and trimming. Each knife is built from ultra‑durable, highly corrosion‑resistant MagnaCut steel, heat-treated to a remarkable 63–64 HRC for exceptional edge retention and long‑lasting performance. MSRP: $600
Puma Knife Trophy Car Set
Blade Length: 2.8″ (Gut Hook), 2.5” (Caping, Fleshing) Blade Grind: Hollow Ground, Satin Finished Scale: POM Commando Stag (Synthetic Material) Blade Material: 1.4116 German Cutlery Sheath: Rugged Leather Sheath (Holds All Three Knives) Date Available: Now Inside Edge: Purpose-built trophy care kit for hunters—includes a gut hook skinner, caping knife, and fleshing knife with a premium leather sheath to keep the full set organized. Designed to handle skinning, caping, and hide prep cleanly whether you’re in camp or at home, and ideal for getting a trophy ready for the taxidermist. MSRP: $175
DPx HEST F Urban Ti Redeye
Knife Type: Folding Blade Length: 2.9” Overall Length: 6.7” Blade Grind: High Saber Scale: Titanium Blade Material: M390 Date Available: Now Inside Edge: Flipper with red aluminum pivot ring and red backspacer. MSRP: $425
