Sometimes You Want A Blade That’s Fun And Exciting Even If It Isn’t An EDC. The Buccaneer Sword From Condor Is All About Having A Good Time.
There’s a pretty good chance you’re not a pirate in the Caribbean or off the Barbary Coast. Even if you’re just a lifelong resident of a landlocked place like Kansas City or Nashville, you’ll absolutely love the new Buccaneer Sword from Condor Tool & Knife.
The massive blade is 15.5 inches in length and is made from 1075 high-carbon steel with a convex. It weighs a shade under 30 ounces so it’s a burly, heavy knife that can be used for bushcraft or for making a big show of slicing large cuts of meats. If you’re a performer, using this sword to prepare steaks for your family at the next barbecue will be remembered for years.
It all stays solid in your hand thanks to the leather-wrapped hardwood handle that is as strong as the blade and stays true while you wield this mighty sword. The included leather sheath will keep the sword safe when stored away.
The Buccaneer Sword is so much fun. If you want a showstopper, and stay on top of maintaining the high-carbon blade, you’ll have yourself a thrilling conversation piece for years to come.
We slash away with three machete options to see which is ready to tame your greenery.
Spring uncovers what winter buries. Duff piles up, vines tighten their grip and brush crowds every trail and fence line. A machete cuts through that mess with reach and rhythm. The long blade sweeps low to clear ground clutter, snaps vines before they climb and trims brush without constant repositioning. One tool handles duff, extra brush and creeping vines in a continuous flow, so a hillside that looked wild at breakfast starts to open by lunch.
A good machete carries authority without dead weight. Thin stock bites deep and releases clean, so each swing clears more space with less effort. The long edge opens lanes. The spine knocks dead twigs free. The tip digs, pries and handles rough chores that punish smaller blades. In much of the world, a machete counts as the only daily tool. That heritage still matters in 2026, whether you reclaim a backyard slope or beat a trail back into shape. These three long blades are our picks to tame your wild hills, homestead and camp.
Getting The Swing Of The Machete
Brush changes the fight, so your swing must change with it. Light grass needs quick wrist cuts that keep your pace steady. Thin vines demand snap cuts that break tension before the blade binds. Thick brush calls for short power strokes that drive the edge through stubborn growth. Deadfall needs controlled chops that protect the edge from hidden knots. Each swing builds from stance, grip and rhythm, not brute force. When you match technique to terrain, the machete feels faster and safer. The right swing turns rough ground into clean, workable space without burning your energy.
Condor Roarlock
Chopping Japanese barberry, an invasive vine with painful thorns, is a necessary and annoying chore—the Condor Roarlock hacked it!
Condor’s Roarlock brings Southeast Asian machete influence into a compact, modern clearing tool. The 14.24‑inch blade has a 20.33‑inch overall length and a 0.12-inch thickness of 1075 high-carbon steel. This design keeps the weight at about 21.5 ounces. The etched damascus‑style finish gives the blade a wild, worked look, while the convex grind drives deep into vines, saplings and stubborn brush without sticking. A high‑impact polypropylene handle locks into the hand and shrugs off weather, sweat and abuse. A full‑tang build runs through the handle, so the Roarlock feels solid when you lean into heavy swings.
The ballistic nylon sheath carries light, rides tough and lets the machete move from truck to trail without fuss. Designed by Joe Flowers for 2026, the Roarlock feels like a fast, compact power tool built for real brush, not just catalog photos.
Beating Barberry Back
The Roarlock has the Godzilla silhouette, with usable features for digging and root-cutting.
I’m a fan of any long blade that has more bend than a straight blade, especially when it has some drop to it. Like a Filipino bolo and kukri, whenever the blade precedes the chopping hand, that’s a good thing. Max impact and leverage are far superior to using an all-straight design. The Roarlock has this!
Chopping the most annoying and painful vines in my forest was a must-do chore. Japanese barberry is an invasive plant with small thorns that are sure to get my knuckles and fingers when removed. They stab directly through hiking pants and most layers of clothing. A machete works best at beating them back, but it’s hard to get to the base without suffering a few thorns. The longer reach of the 14.24‑inch blade on the Roarlock helps. Especially when using a helper stick to push back the thorny shrub of mayhem.
Soon enough, I had a pile of various vines, including blackberry, dry grasses, small creeper vines and the dreaded barberry. Also, soon enough, I hit a rock or two and mashed the tool’s tip. So what? It’s 1075 carbon steel and would be easy to get back in order. However, it’ll happen again, but this is a tool meant for work!
ESEE Expat El Deguello
Expat El Deguello, influenced by years of travel and Randall’s Adventure & Training, features a 12.75-inch 1075 carbon steel blade.
The ESEE Expat El Deguello grew out of years of Expat travel and hanging out with Randall’s Adventure & Training. This was in places where a machete counted as daily life support, not a luxury. The blade is about 12.75 inches of 1075 carbon steel with a dark stonewashed finish, set in an overall length of around 18.75 to 19 inches. The blade’s shape has a parang-ish style, giving the machete a strong, weight‑forward feel without turning it into a boat anchor. A flat grind keeps the edge lively and easy to touch up with a pocket stone in the field. Black linen Micarta scales wrap the full tang and give a secure, textured grip that stays honest in sweat, rain and humidity. A brass‑lined lanyard hole anchors a safety cord for steep slopes or riverbanks.
The tan canvas sheath rides light on the belt and matches the tool’s no‑nonsense attitude. Built in El Salvador as part of the Expat line, the El Deguello blends South American machete DNA with ESEE’s survival mindset. Making it a dependable long‑blade for trail clearing, camp work and hard bushcraft.
Seasonal Slashing
I got my hands on the El Deguello Expat machete in winter. I wasn’t sure how it would do in a snowy environment. However, we needed to travel through uneven terrain with gear weight, so light was right. No axe or thick splitting tool accompanied we three adventurers on this trip. In fact, we had two Expat machetes in camp as my buddy brought his Expat Darien machete.
The El Deguello started earning its keep from the start. Due to many branches and small trees succumbing to the weight of the snow, the El Deguello shone. I cleared woody and leafy debris to make the path easier for campers arriving later in the day. By the time I got to camp, I was already a believer of the utility the El Deguello packs. Chopping frozen wood from previous campfires and new dead branches were on the docket. This was predominantly a hardwood forest, so the El Deguello had to be hatchet-ready. And it was!
TOPS Knives Sneak Reaper
The TOPS Knives Sneak Reaper features an 18.5-inch length and a fast-moving 12-inch blade, designed for tight brush.
The TOPS Knives Sneak Reaper draws on Ed Calderon’s counter‑custody background, shaping a fast, purposeful blade built for tight spaces. It has a lean profile that favors quick cuts through vines and brush. The long edge rewards snap cuts, while the balanced weight keeps the machete quick instead of front‑heavy. The handle geometry follows Calderon’s no‑wasted‑motion mindset and gives a locked grip during hard clearing strokes and tight work around obstacles.
The Sneak Reaper has an overall length of 18.5 inches and a 12-inch blade that moves fast through tight brush. The black powder coating protects the blade and supports Calderon’s stripped‑down, purpose‑driven style. The saber grind gives the edge a strong bite, enabling it to handle vines and stubborn growth without slowing your rhythm. The 0.125‑inch thickness keeps the blade lively and responsive during long clearing sessions.
The sheath system supports fast deployment and secure carry, echoing the tool’s defensive roots and utility. Final production specs have not yet been added to TOPS’ catalog pages.
In The Thickets
The TOPS Sneak Reaper has a 5-inch tan Micarta handle that offers a confident, secure grip with great traction.
Once I got this cutting machine in the woods, it called to more substantial branches and green wood. It wasn’t the weight as much as the thickness and feel. The sweet spot was several inches from the tip, making it feel like a shorter machete. This aspect got me thinking of what a great camp machete it would make. However, the pronounced upsweep had its benefits while standing or bending slightly. The front curve can easily nip nasty, thorny vines and thin, new growth without needing to get low. It reminded me of a smaller panga-style machete.
Turning the blade over revealed a sharp tip that could drag and pull the brush back after chopping it. This tip was also excellent at impaling scrap wood and relocating it. I love a tool that helps out.
The 5‑inch handle uses contoured tan Micarta that locks into the hand with confident traction. The 15‑ounce blade weight creates a sharp balance between speed and authority during heavy swings. In a standing position, slashing out front, the curve helped continually slice through materials with authority. I can’t wait to use this one on meat and coconuts.
Final Cut
Three styles of machete sheaths for each trail tamer From left, the Sneak Reaper, El Deguello and Roarlock.
The Roarlock was the clear pick for me while beating back the new brush of spring. Had this been a machete camp challenge, the TOPS Sneak Reaper and Expat El Deguello would shine. Maybe that’s better left for another article!
SOG marks four decades with a limited, 500-piece run honoring its original MACV-SOG combat bowie root.
To mark four decades in business, SOG Knives has released a limited-edition homage to the blade that started it all: the 40th Anniversary Fat Guard Bowie. Drawing direct design cues from the original S1 Bowie introduced in 1986, the new release pays tribute to the covert fighting knives carried by MACV-SOG personnel during the Vietnam War.
Historical Roots, Modern Production
The 40th Anniversary model centers around a 6.1-inch clip-point blade forged from AUS-8 stainless steel. SOG finished the steel with a black PVD coating for added corrosion resistance and reduced reflection.
True to the traditional combat bowie silhouette, the handle is built from stacked leather, offering a classic aesthetic alongside a contoured grip. A substantial brass guard and matching butt cap frame the handle assembly. Production is strictly capped at 500 individually serialized units, with each knife’s specific number etched directly into the pommel.
Commemorative Display Package
Rather than shipping as a standalone tool, SOG packaged the anniversary Bowie as a complete collector’s set. The knife sits inside a handcrafted pine display case outfitted with a clear glass viewing lid and an engraved anniversary plaque.
Accompanying the fixed blade inside the presentation box is a custom SOG 40th anniversary Zippo lighter and a signed certificate of authenticity. For field carry or storage, the set includes a heavy-duty black leather belt sheath, complete with a front-mounted snap pocket containing a touch-up sharpening stone.
The 40th Anniversary Fat Guard Bowie package is available directly through SOG’s website while supplies last.
Brandon Hyner’s First Knife Is One Of His Most Current Knives As His New Work Takes Inspiration From His First Blade
Sometimes things take their own sweet time before coming to fruition. Such is the case with Brandon Hyner’s damascus gentleman’s hunter.
Hyner is an accomplished maker. He is a champion of History Channel’s Forged in Fire and has built a business of knifemaking and blacksmithing in his shop in Groton, on the Connecticut coast of Long Island Sound. He has built a following of just over 9,000 followers on Instagram where he showcases his work and produces behind the scenes videos in his shop of him doing everything from welding to forging by hand.
The damascus gentleman’s hunter is the second of a design Brandon made when he first started blacksmithing and knifemaking. With the help of a Texas bladesmith, he forged a damascus billet for the first knife, and “was forever grateful” for the opportunity. Four years later Brandon decided to finish the knife and was very pleased with how it turned out. As he noted, “I decided to keep the blade as is, as it was a big milestone knife for me.”
It has a six-inch blade with a desert ironwood handle. The brass spacer and carbon fiber bolster complete the look.
He posted the knife online and someone asked to buy it. However, rather than sell it, Brandon made a similar knife instead. “The second knife came out much better than the first one,” he noted, “but I’m extremely happy with them both.”
It’s a matched pair he can always point to as proof of his maturation as a maker and a beginning of possibly greater things to come. It was a four-year odyssey well worth the wait.
Damascus Gentleman’s Hunter Knife Specs
Knife name: Damascus gentleman’s hunter
Blade length: 6 inches
Blade material: Low-layer twist damascus
Handle: Desert ironwood w/brass spacer
Bolster: Carbon fiber
Overall length: 10 inches
For more information contact Brandon Hyner, Dept. BL4, 852 Bank St., New London, CT 06320 631-742-7227 [email protected].
Ernest Emerson Is One Of The Leading Designer Of Tactical Knives, And We Get To See His Shop And How He Works
Ernest Emerson is entering his 44th year of knifemaking and his manufacturing company, Emerson Knives, Inc., is celebrating its 25th anniversary. Many knife nuts who have been around awhile remember Ernest when he was purely a custom knifemaker who was making exquisite folders exclusively. Then things changed.
When the first Gulf War came along, Emerson—who has an extensive background in martial arts—had already been working on tactical knife designs and, being the patriot he is, was ideally positioned to do his part in the war effort. Along with a handful of other talented custom makers, it wasn’t long before Ernest was instrumental in helping kick off the modern tactical knife movement that is still a huge part of the cutlery market today.
He never looked back and 25 years ago took his designs to the masses, switching his focus to becoming a cutlery manufacturer of tactical knives, primarily of the folding kind. He continues to make a limited number of custom knives and also uses his skills designing new knives for his factory line. We asked Ernie to give us the lowdown on the tools and equipment he relies on most to do his custom work and prototypes for Emerson knives.
Ernest Emerson’s Tools And Machines
Emerson employs a number of light, low-cost bench-top drill presses. He leaves them set up for various drilling and reaming operations, which saves him a lot of time as he moves down the row drilling liners and handles.
He opened by praising his vintage mill.
“The old Bridgeport has been fixed and rebuilt more than once but it is solid old-school quality and can still easily hold +/- .001-inch tolerances,” he observes. “I use it for all of my milling, tool, jig and fixture building, as well as all operations on bolsters and handles that require precise tolerances and hole depths such as bolsters, counterbores and handle countersinks.”
For grinding, he calls out one grinder maker in particular as his favorite.
“I use a variety of grinders but my go-to machines are those by Travis Wuertz. They are solid, sturdy, virtually silent, and extremely well thought out—and engineered by Travis,” Ernest says. “Their real value to me is that I can build a wide variety of specialized fixtures and tools that allow me to do very precise grinding operations on both blades and handles.”
Emerson uses a number of low-cost bench-top drill presses.
“At $125-$150 each I can afford to own several of them and leave them set up for various drilling and reaming operations,” he notes. “This saves me a lot of time as I can just move down the row as I drill liners and handles. The light drill presses work perfectly for me because all the holes I drill, tap or ream are small diameters and don’t need heavy drill presses to perform the operations. Plus, I get a better, lighter feel when I’m drilling delicate and expensive materials like pearl without damaging them.”
Keeping Things In Order
Hammered-6 in Moku-Ti bolsters with distressed solid copper scales and a hammered blade. Emerson’s list price: $10,000.
Ernest is a firm believer in being organized.
“Although my work area may look a little cluttered or messy [he was preparing for a show when the accompanying photos were taken], I am extremely organized and orderly,” he emphasizes. “Having come up through an apprenticeship program to become a tool-and-die maker, I had it drummed into me the importance of cleanliness and organization in producing precise results.”
He also relies on the smaller things that make up the whole of knifemaking.
“Although machines seem to play the biggest role in most shops, in my endeavors it is the jigs and fixtures that are my most valuable tools,” he states. “Coming up through the apprenticeship program early in my career and eventually earning the title of tool-and-die maker, it was hammered into me that the best machinists are the ones that can conceptualize and invent the most efficient and precise tools, jigs and fixtures to help them do their job. There is a lot of truth in that statement. I also have a full machine shop and woodworking shop with all the jointers, planers, sanders, table saws, routers, lathes and woodworking tools that I use.”
The New Rescuehawk From White River Knife & Tool Is An Excellent Fixed-Blade Multi-Tool That Will Make Any Outdoorsman Happy.
Not every multi-tool folds up and fits in your pocket, and that’s a good thing. For someone looking for a more robust multi-tool, the new tactical Rescuehawk from White River Knife & Tool is exactly what you’re looking for.
Made from quarter-inch thick 80CRV2 steel, and designed by Kurt Delia, the Rescuehawk does a little of everything. The head features a 2.6-inch splitting edge with a strong piercing point horn on the opposite end.
The handle is incredibly versatile with a half-inch gas line channel wrench and split chisel pry point and textured G10 handle scales to provide excellent grip. The included bottom-eject Kydex sheath keeps the blade safe and secure in transit.
Overall, this tool is excellent for any outdoor lover and is great to have in case of an emergency or survival situation.
Know what they are, how to use them and how well they perform.
A bird and trout knife is a compact, fixed blade designed for hunters and anglers to process small game and fish, such as squirrels, rabbits, birds and trout. The knives are known for their portability and convenience, as they can easily fit into a backpack or pocket. The name is derived from the knife’s popularity among outdoor enthusiasts who require a reliable tool to assist them in their hunting or fishing activities.
When choosing a hunting or fishing knife, there are a few key factors to consider. First and foremost, the blade material is essential. To ensure optimal performance and longevity, your blade should be crafted from high-quality stainless or carbon steels. Equally important is the blade design; a thin, flexible drop- or trailing-point shape will allow for easy filleting and deboning, and precise cuts and slices. The handle should also be comfortable and ergonomic, with a good grip and balance.
The sheaths are simple affairs, usually made from leather with a belt loop. The Exodus 3 has a Kydex sheath (right) made for scout carry.
A secure and durable sheath is a must-have. Some even feature a thumb lock to prevent accidental slips. Remember these factors for a trusty tool that you will keep by your side for years to come.
Case Mini Finn
A bird always in season is the chicken. The Case Mini Finn sliced through dense breast and also onions and peppers for chicken kabobs, one of the author’s favorites.
The small knife in the Case leather hunter two-knife hunting set is the Mini Finn, sold separately. It’s a durable, reliable fixed blade for outdoors, hunting and hiking. The rugged knife features a 3.13-inch clip-point blade and polished leather handle for a secure grip. Blade steel is Tru-Sharp™ stainless, Case’s version of 420HC. The knife is ideal for small game.
EVALUATION: The blade was sharp from the get-go. Small and agile, the knife and its concave-ground blade proved perfect for the tasks it was dealt. A section about 1 inch long on the spine has subtle ridges for purchase if that’s how you like to grip a knife.
Making a feather stick was a snap with the Mini Finn.
The blade quickly sliced the only bird in season—chicken—for kabobs in the cabin. When making tent stakes the blade sliced through green witch hazel with authority. The handle is a hidden gem, paying homage to the traditional stacked-leather grip. Holding it feels like a throwback to the early 1900s Finnish style. The knife has a decent finger guard and a grip for three fingers. However, when the Mini Finn is held in a sideways or chest-lever grip, the buttcap feels a bit awkward.
A simple leather sheath completes the package. It sports a drain hole and can be worn on a thin belt or as a neck knife. The sheath is basic—nothing new under the sun—but why change a good thing? The Mini Finn is easily the best buy of the test quartet.
Case Mini Finn Specs Blade Length: 3.13” Blade Steel: Tru-Sharp™ Stainless Blade @ Thickest: .062” Blade Finish: Mirror polished Scales: Leather Weight: 2.5 ozs. Overall Length: 6.5” Sheath: Leather Country of Origin: USA MSRP: $82.99
ESEE CR2.5
Designed for small game, birds and fish, the ESEE CR2.5 excels at woodcraft, too. The 90-degree spine scrapes tinder and a ferro rod, while the sharp edge effortlessly shaves feather sticks.
The ESEE CR2.5 is a little bird-and-trout-style knife designed by Cody Rowen of Rowen Manufacturing. It features a sturdy 1095 carbon steel blade with a black-oxide-stonewashed finish and ESEE logo. It is lightweight and easy to carry. The handle is available in Micarta® or G-10, providing a comfortable and secure grip.
Evaluation: This slick little cutter is an excellent tool for fishing, small game hunting and general woodcraft. The blade is flat ground and has a sharp 90-degree spine that can be used to scrape tinder with a ferro rod. During a survival class in Alabama, it was used to carve feather sticks and scrape fine wood shavings for a fire. Additionally, it proved handy for skinning squirrels.
The CR2.5 makes butchering effortless, especially for small, delicate game like birds and trout—and squirrels.
The handle has a comfortable grip for three to four fingers. With use, it will develop a patina similar to the blade. ESEE offers the grip in orange G-10 and Micarta. A leather pouch-style sheath, which can be used as a necker due to its light weight, keeps the knife secure and safe. There’s no drain hole on this one but it has a generously sized belt loop.
Paired with a chopper, the CR2.5 will definitely get it done. It takes third place among the test bunch as the best buy for the money.
ESEE CR2.5 Specs Designer: Cody Rowen Blade Length: 2.5” Blade Material: 1095 carbon steel Rockwell Hardness: 55-57 HRC Blade @ Thickest: .125” Blade Finish: Black oxide stonewashed Scales: Micarta® or G-10 Weight: 2.5 ozs. Overall Length: 6.25” Sheath: Leather pouch Country of Origin: USA MSRP: $143.50
TOPS Knives Bird and Trout Knife (BTK)
The TOPS BTK excels at delicate work like scoring salmon skin and scaling. The slight upsweep helps ensure the tip doesn’t penetrate anything it shouldn’t.
Allen Jensen, also known as the Axeman, designed the TOPS Knives Bird and Trout Knife (BTK). With a stainless steel blade, a stonewash finish and a black canvas Micarta handle, the knife is perfect for camping, kitchen chores and other outdoor activities. The handle design allows multiple grip options, making it a great skinning tool for tough hides like bear and beaver.
Evaluation: Of the test bunch, the BTK is closest to a regular-size fixed blade. The blade shape’s slight upsweep lends itself well to food preparation, especially from a standing position. The blade came extremely sharp and performed flawlessly, especially processing food. I used the BTK to section a piece of fresh salmon and as a fish scaler. The upsweep didn’t tear any of the fillet in the process. The sharp edge scored the skin quickly, aiding in rendering super-crunchy-skin salmon.
The TOPS BTK is a superb EDC knife for the woods. Due in no small part to the blade’s healthy .13-inch thickness, it easily baton cut through green witch hazel
The handle features an ergonomic design, providing a secure grip when it’s gooey. The scales don’t extend to the blade, allowing greater versatility when choking up for skinning.
The choice of black leather for the sheath was wise, as it hides stains from food and game. The sheath is heavy duty and comes with an average belt loop, but no drain hole. The BTK is the priciest of the bunch but well worth it.
TOPS Knives BTK Specs Designer: Allen Jensen Blade Length: 3” Blade Steel: 440C stainless Rockwell Hardness: Cryo-treated to 58-60 HRC Blade @ Thickest: .13” Blade Finish: Stonewash Scales: Black canvas Micarta® Weight: 3.5 ozs. Overall Length: 6.75” Sheath: Black leather Country of Origin: USA MSRP: $175
White River Knife & Tool Exodus 3
Using the Exodus 3, the author created an eight-notch try stick. He tested the knife’s ability to slice through green wood and found the narrow blade allowed easy maneuvering in small spaces.
The lightweight White River Knife & Tool Exodus 3, also known as Adventurecraft, is a small but robust survival knife. It’s the perfect size for bird and trout tasks, game dressing, food preparation and everyday carry.
Evaluation: Rather than the regular use as before, I put this one through a special gauntlet. The blade is tough. The thick spine culminates in a thin, flat grind—it’s a slicer. I wasted no time making an eight-notch try stick*. The blade’s geometry sliced through green wood like butter. I moved onto a survival fishing spear made from dry maple and the edge had no issues muscling through the seasoned wood. As a final coup de gras, I pounded the blade into an ammo canister. The blade remained unscathed and I was not surprised.
The author employed the Exodus 3 to make a spear for fish and frog gigging. The knife effectively balances between being a bird and trout knife and woods companion.
The handle is long enough for a four-finger grip yet is the narrowest of the test knives. Narrow handles can lead to fatigue by overcompensating when gripping. The scales are a “10” on the cool factor scale and provide a secure grip to back it up.
The Exodus 3 was the only test knife I could scout carry, keeping it out of the way when on the trail or in camp. Blade retention also was outstanding in the sheath and on the belt. The knife is the second best buy of the gang.
White River Exodus 3 Specs Blade Length: 3.15” Blade Steel: CPM S35VN stainless Blade @ Thickest: .13” Blade Finish: Stonewash Scales: Canvas Micarta® Weight: 2.3 ozs. Overall Length: 7.2” Sheath: Black Kydex Country of Origin: USA MSRP: $140
*In bushcraft, a try stick is a wooden stick carved with notches for use as a teaching aid.
